After OTA upgrade to Pie I get the following problem ... my cell phone says usb cable is connected (but it's not), i have the ability to decide what to do, but when i choose it stays on charging option via usb cable all the time. After a few restarts it disappears, but after it disappears, when I lock it then it blocks.
After factory reset and alternate reset it's same.
https://ibb.co/qmYy7my
https://ibb.co/RzvYVW1
vaniot said:
After OTA upgrade to Pie I get the following problem ... my cell phone says usb cable is connected (but it's not), i have the ability to decide what to do, but when i choose it stays on charging option via usb cable all the time. After a few restarts it disappears, but after it disappears, when I lock it then it blocks.
After factory reset and alternate reset it's same.
https://ibb.co/qmYy7my
https://ibb.co/RzvYVW1
Click to expand...
Click to collapse
KDZ to latest PIE
Link from where i can download fine KDZ file for latest Pie.
vaniot said:
Link from where i can download fine KDZ file for latest Pie.
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-v30/development/h930-lg-v30-european-market-t3951898
Now secure start-up. Enter pasword to unlock.
After LGup and PARTITION DL !!!
Help
vaniot said:
Now secure start-up. Enter pasword to unlock.
After LGup and PARTITION DL !!!
Help
Click to expand...
Click to collapse
? Are you talking about TWRP or just booting your phone.
just booting phone...
vaniot said:
just booting phone...
Click to expand...
Click to collapse
Is it asking for your Google password?
Sometimes it happens if you turn off the phone without unlocking the screen first. Then you flashed new firmware, and it's trying to verify the phone wasn't stolen.
That's my best guess from what you're describing.
No google pasw...
After pie ota update everything got disrupted. When i turn off mobile, i cant normal turn it on, must do with vol. down key an power but.. to turn it on.
Is there any way to skip this ?
vaniot said:
No google pasw...
After pie ota update everything got disrupted. When i turn off mobile, i cant normal turn it on, must do with vol. down key an power but.. to turn it on.
Is there any way to skip this ?
Click to expand...
Click to collapse
Try reflashing KDZ in LGUP Refurbish mode.
After reflashing KDZ in LGUP Refurbish mode secure start-up i gone, but i have same problems from my firs post.
vaniot said:
Now secure start-up. Enter pasword to unlock.
After LGup and PARTITION DL !!!
Help
Click to expand...
Click to collapse
I had the same problem and could not reflash the KDZ from LG-UP because it would not recognise my phone. But after factory reset using the power and volume down buttons, the phone rebooted normally without asking password. Hope this helps
And after upgrading to 30q, i still have the same problems.....
What's the latest version of Oreo "22j" ?
vaniot said:
And after upgrading to 30q, i still have the same problems.....
What's the latest version of Oreo "22j" ?
Click to expand...
Click to collapse
Check the EU H93O Oreo KDZ thread.
Related
So, I hope I'm not completely bricked. I was using LGNPST to flash a stock ROM, and at 85%, the phone rebooted and is now in a bootloop that ends in "Security Error". I cannot get to Download Mode either, nor is it seen by ADB (obviously). Can anyone help?
Try this- with the phone powered off, press and hold down the volume and power key simultaneously. You will be prompted with a Factory hard reset screen. Confirm the actions and you should be good as new.
ph0dacbeit said:
Try this- with the phone powered off, press and hold down the volume and power key simultaneously. You will be prompted with a Factory hard reset screen. Confirm the actions and you should be good as new.
Click to expand...
Click to collapse
I did that already. I get the Android, and then it goes back to the bootloop again after about 30 seconds.
chrisliphart said:
I did that already. I get the Android, and then it goes back to the bootloop again after about 30 seconds.
Click to expand...
Click to collapse
Which .tot file were you using to LGNPST?
ph0dacbeit said:
Which .tot file were you using to LGNPST?
Click to expand...
Click to collapse
LGE970AT-01-V20j-310-410-MAR-08-2013+0.tot (converted to .bin of course).
chrisliphart said:
LGE970AT-01-V20j-310-410-MAR-08-2013+0.tot (converted to .bin of course).
Click to expand...
Click to collapse
Does it show the LG logo, showing security error on the bottom? Which rom were you coming from before you LGNPST?
ph0dacbeit said:
Does it show the LG logo, showing security error on the bottom? Which rom were you coming from before you LGNPST?
Click to expand...
Click to collapse
I was stock 4.0.4 unrooted (this all started because the phone won't pull the JB update OTA, and the phone wasn't showing in ADB to root it), and yes, it's the LG logo with Security Error on the bottom.
chrisliphart said:
I was stock 4.0.4 unrooted (this all started because the phone won't pull the JB update OTA, and the phone wasn't showing in ADB to root it), and yes, it's the LG logo with Security Error on the bottom.
Click to expand...
Click to collapse
So you can still get into factory hard reset mode and then it just bootloops after the reset has been confirmed?
http://forum.xda-developers.com/showpost.php?p=41415103&postcount=248
I am sorry that I may have mssed something in your other post. But firmware version 09j is one I have never heard of.
ph0dacbeit said:
So you can still get into factory hard reset mode and then it just bootloops after the reset has been confirmed?
Click to expand...
Click to collapse
Yep, after a factory hard reset, it still loops the same.
adfurgerson said:
http://forum.xda-developers.com/showpost.php?p=41415103&postcount=248
I am sorry that I may have mssed something in your other post. But firmware version 09j is one I have never heard of.
Click to expand...
Click to collapse
And so I just searched for it. This is apparently a test unit (I was given the phone in a trade), which would explain why it won't pull OTA updates. And is probably why I'm having all these issues. Sonofa...
Good day lads! anyone help me recover my phone. Im stucked in boot logo.
I have rooted my lg g2 mini with kingroot and install superSU me and want to change the with superSU from the kingrootSU then i I misclicked and something then my phone goes to a recovery mode with nothing was written. then after that I restarted my phone and them I'm stuck in boot logo after that. I hope this is just a softbrick
aljandigabonskie said:
Good day lads! anyone help me recover my phone. Im stucked in boot logo.
I have rooted my lg g2 mini with kingroot and install superSU me and want to change the with superSU from the kingrootSU then i I misclicked and something then my phone goes to a recovery mode with nothing was written. then after that I restarted my phone and them I'm stuck in boot logo after that. I hope this is just a softbrick
Click to expand...
Click to collapse
can you enter download mode ?
if you can just flash kdz with a normal way or if you don't have any data to loose with CSE way
Don't worry, it's a soft brick.
Get the phone in download mode and flash a kdz for your device.
You may have to do a factory reset, but don't until you have to.
Vagelis1608 said:
Don't worry, it's a soft brick.
Get the phone in download mode and flash a kdz for your device.
You may have to do a factory reset, but don't until you have to.
Click to expand...
Click to collapse
how do u go download mode? I'm sorry but Im just new to LG.
aljandigabonskie said:
how do u go download mode? I'm sorry but Im just new to LG.
Click to expand...
Click to collapse
Plug a USB to a PC with LG 's drivers installed, hold Vol- on your device and plug the other end of the USB cable to your device.
(That's probably it, I can't remember for sure. If it's not, then Google it)
Vagelis1608 said:
Plug a USB to a PC with LG 's drivers installed, hold Vol- on your device and plug the other end of the USB cable to your device.
(That's probably it, I can't remember for sure. If it's not, then Google it)
Click to expand...
Click to collapse
I'll try this tomorrow Im downloading the files now. Thansk by the way!
Vagelis1608 said:
Plug a USB to a PC with LG 's drivers installed, hold Vol- on your device and plug the other end of the USB cable to your device.
(That's probably it, I can't remember for sure. If it's not, then Google it)
Click to expand...
Click to collapse
keep holding Vol+ and plug usb
numpea said:
keep holding Vol+ and plug usb
Click to expand...
Click to collapse
umm when i do this my phone just charged. i cant enter download mode.
numpea said:
can you enter download mode ?
if you can just flash kdz with a normal way or if you don't have any data to loose with CSE way
Click to expand...
Click to collapse
I've been flashing my LG G2 MINI (D620K) since last month and the problem doesn't seem to go away. I flashed, it works for a few weeks but then my phone just reset itself and the logo stucks again. I was hoping that you happen to know a solution
Hello all,
I am experiencing a boot error telling me to using the Verizon Software Repair Assistant and that it is experiencing an "Authentication Fail #9 [Modified].
Can someone link to the repair tool? I cannot get the assistant now that the phone refuses to boot. Or if someone has a different solution they are welcome to offer it.
Much thanks.
Curious as to what what system you are using, windows 7,8,or 10?
moejoe88 said:
Curious as to what what system you are using, windows 7,8,or 10?
Click to expand...
Click to collapse
Windows 7. I should add that it may be due to something external from the root. After rooting I installed a few things, rebooted, then a few more things were installed, and rebooted and then this came up. It may be after installing and setting up Chainfire's Liveboot app.
I am in the same boat. Stuck on "Start Up Failed". Computer will not recognize the phone. I dont know what to do. My Verizon Repair Assistant is from my Galaxy S6 Edge & doesnt recognize my LG V10. Any suggestions or assistance would greatly be appreciated.
Check this out...
https://mega.co.nz/#!lkwwVJ6S!zOBR9nKqQBGLi9bK4rr1RO70OZKANg2Mh5tbSbF8xaE
Otherwise you should be able to boot into download mode and use LGUP with a .KDZ file to restore the phone back to factory.
http://forum.xda-developers.com/showthread.php?t=3224170
burnsky05 said:
Check this out...
https://mega.co.nz/#!lkwwVJ6S!zOBR9nKqQBGLi9bK4rr1RO70OZKANg2Mh5tbSbF8xaE
Otherwise you should be able to boot into download mode and use LGUP with a .KDZ file to restore the phone back to factory.
http://forum.xda-developers.com/showthread.php?t=3224170
Click to expand...
Click to collapse
Thanks. I tried that, but now LGUP and/ or computer wont recognize phone. Stuck in bootloop no matter what I try.
MrUnionFan said:
Thanks. I tried that, but now LGUP and/ or computer wont recognize phone. Stuck in bootloop no matter what I try.
Click to expand...
Click to collapse
You can't pull the battery and get it into download mode?
MrUnionFan said:
Thanks. I tried that, but now LGUP and/ or computer wont recognize phone. Stuck in bootloop no matter what I try.
Click to expand...
Click to collapse
Unplug baterry 1 minute inplug again when see phone not auto boot hold volume down then connect cable phone boot downloadmod up kdz v11b then test
tungkick said:
Unplug baterry 1 minute inplug again when see phone not auto boot hold volume down then connect cable phone boot downloadmod up kdz v11b then test
Click to expand...
Click to collapse
Thank you for your help!! I was able to get in to download mode & flash the files.
tungkick said:
Unplug baterry 1 minute inplug again when see phone not auto boot hold volume down then connect cable phone boot downloadmod up kdz v11b then test
Click to expand...
Click to collapse
Yeah, I am still having trouble getting the device into download mode. I can get into system Recovery where there is a menu, but no "Download Mode"
TheJOJ said:
Yeah, I am still having trouble getting the device into download mode. I can get into system Recovery where there is a menu, but no "Download Mode"
Click to expand...
Click to collapse
Power off your phone. Then hold down the Volume up button and plug your phone into the PC and the phone will boot into Download Mode. You can't do it from recovery.
Okay. Got it. It was just being a little finicky. Thanks.
My friend was following the WTF V30/V30+/V30S Bootloader Unlock and Root and Frankenstein posts. He started using the Magstik to uninstall bloatware then tried applying a OTA update that showed up on the phone it restarted but never went past the Verizon load screen. The phone now no longer boots to where you can use the phone nor stays in download mode to use adb. On one computer sees the device as LGE Android MTP Device on another computer it shows it as that but the device needs troubleshooting. Anyone have any advice to get it back to where I might be able to get it functional again?
Thank you again in advance!
LawndoCalrissian said:
Bootloader Unlock and Root and Frankenstein posts. He started using the Magstik to uninstall bloatware then tried applying a OTA update that showed up on the phone it restarted but never went past the Verizon load screen.
Click to expand...
Click to collapse
Why would he apply an OTA update when he no longer has full stock firmware? He had TWRP custom recovery!
Yeah, he messed up the phone.
Just to be clear WTF instructions -- that had nothing to do with his actions.
By this point he had successfully completed all those instructions and had flashed back to VS996 firmware.
The WTF Instructions tell you how to update your phone correctly once TWRP custom recovery is installed.
____
Try Master Reset from Frankenstein instructions.
Then if you can get back into Download mode, flash back to Nougat US998 via Partition DL, all partitions.
Master Reset again.
Then Refurbish to US998 Oreo 20h.
Your bootloader will still be unlocked.
Go through WTF INSTRUCTIONS SECTION 6 and re-install TWRP and the three root files again.
ChazzMatt said:
Try Master Reset from Frankenstein instructions.
Click to expand...
Click to collapse
Thanks ChazzMatt, however I've tried the Master Reset and it doesn't seem to be doing anything to the phone. It presents the message about Delete all user data (including LG and carrier apps) and reset all settings. I select "Yes" screen goes black for about 2 to 3 seconds then I get the same message, Delete all user data (including LG and carrier apps) and reset all settings with Yes already selected. I've selected that or left it alone and the results are the same. Screen flashes LG V30 ThinQ up for a sec then the screen goes black for about 3 seconds then shows the LG V30 ThinQ again before going back to the Verizon logo screen.
Just to confirm: holding vol+ with USB plugged in during a reboot doesn't go to download mode for using LGUP. Also holding vol- with USB plugged in during a reboot doesn't go to fastboot mode for using ADB since you... Sorry, your friend, was running VS996 firmware, correct?
Correct, if I hold Vol+ and plug usb in I get download mode for maybe 2 secs but LGUP and computer doesn't recognize the phone then it begins to boot up the phone. I have the LG Mobile USB drivers installed as well. Vol- doesn't do anything. Yeah I don't know what my friend did but it doesn't seem to be good. I'm not even sure what ROM or version of ROM it has on it because he doesn't remember. All it does currently if I power it on is it sets at the Verizon traveling dots screen.
xaxxelous said:
Just to confirm: holding vol+ with USB plugged in during a reboot doesn't go to download mode for using LGUP. Also holding vol- with USB plugged in during a reboot doesn't go to fastboot mode for using ADB since you... Sorry, your friend, was running VS996 firmware, correct?
Click to expand...
Click to collapse
Correct, if I hold Vol+ and plug usb in I get download mode for maybe 2 secs but LGUP and computer doesn't recognize the phone then it begins to boot up the phone. I have the LG Mobile USB drivers installed as well. Vol- doesn't do anything. Yeah I don't know what my friend did but it doesn't seem to be good. I'm not even sure what ROM or version of ROM it has on it because he doesn't remember. All it does currently if I power it on is it sets at the Verizon traveling dots screen.
Find someone with an octoplus box and use 9008 mode to flash a kdz. I think thats your only option unless your friend can return it or warranty it through Verizon.
Then, dont ever ever take an OTA on a modded phone again.
HI!
I playing with different firmwares on ulocked LG v60 At&T. After I erased FTM, OP_A OP_B, MODEM_A MODEM_B, SID_A SID_B I try to put phone in download mode but phone back to edl mode.
Qualcomm HS-USB QDLoader 9008 in system but I have no access via QFIL. I try to hold PWR and VOL-, all three buttons. Nothing helps.
How to put my phone in working order?
alexnew33 said:
HI!
I playing with different firmwares on ulocked LG v60 At&T. After I erased FTM, OP_A OP_B, MODEM_A MODEM_B, SID_A SID_B I try to put phone in download mode but phone back to edl mode.
Qualcomm HS-USB QDLoader 9008 in system but I have no access via QFIL. I try to hold PWR and VOL-, all three buttons. Nothing helps.
How to put my phone in working order?
Click to expand...
Click to collapse
Did you ever fix this? I have this problem right now. Stuck in edl mode and can't get to download mode.
mkennedy455 said:
Did you ever fix this? I have this problem right now. Stuck in edl mode and can't get to download mode.
Click to expand...
Click to collapse
It's bricked.You'll need to restore it via Qfil.Read this post here,it has the 20q firmware for AT&T as well.
LMV600AM Restore/Ugrade Guide
This restore process is intended for the AT&T V60 (lmv600am) model and will WIPE your data so back it up if you want to keep it! This process will restore the lmv600am to original factory state for the AT&T v60 v20q build (a11). I’ve dumped all...
forum.xda-developers.com
surgemanx said:
It's bricked.You'll need to restore it via Qfil.Read this post here,it has the 20q firmware for AT&T as well.
LMV600AM Restore/Ugrade Guide
This restore process is intended for the AT&T V60 (lmv600am) model and will WIPE your data so back it up if you want to keep it! This process will restore the lmv600am to original factory state for the AT&T v60 v20q build (a11). I’ve dumped all...
forum.xda-developers.com
Click to expand...
Click to collapse
It looks like this was what he was trying to do...was trying to get a remote sim unlock...
He was doing at least steps 1-4 on that list but kept getting some Sahara error and wanted me to go back to download mode again which is when it ended up stuck in edl and only connects via qfil.
Mine is a t mobile variant but it looks like the same steps just different file to flash.
mkennedy455 said:
It looks like this was what he was trying to do...was trying to get a remote sim unlock...
He was doing at least steps 1-4 on that list but kept getting some Sahara error and wanted me to go back to download mode again which is when it ended up stuck in edl and only connects via qfil.
Mine is a t mobile variant but it looks like the same steps just different file to flash.
Click to expand...
Click to collapse
Yes it's the same steps.Try this and it should get you to download mode and do a refurb. with a T-Mobile kdz. and LGUP.Get the device in edl mode.Open Qfil,and choose flat build etc.Load the firehose,and then choose partition manager.Erase,not delete or remove these 4 partions.After you erase these,load these 4 back in the respectful partition places.This will be boot_a,boot_b,recovery_a,and recovery_b.Then restart the device.This should get you back to a working download mode so you can flash a working kdz image back to the device with LGUP.
surgemanx said:
Yes it's the same steps.Try this and it should get you to download mode and do a refurb. with a T-Mobile kdz. and LGUP.Get the device in edl mode.Open Qfil,and choose flat build etc.Load the firehose,and then choose partition manager.Erase,not delete or remove these 4 partions.After you erase these,load these 4 back in the respectful partition places.This will be boot_a,boot_b,recovery_a,and recovery_b.Then restart the device.This should get you back to a working download mode so you can flash a working kdz image back to the device with LGUP.
Click to expand...
Click to collapse
I will try this again now that the phone has sat a couple days but I believe that's exactly what the "unlock tech" guy was doing and it was giving a Sahara error of some kind. I thought I had a picture of the exact error but I don't.
mkennedy455 said:
I will try this again now that the phone has sat a couple days but I believe that's exactly what the "unlock tech" guy was doing and it was giving a Sahara error of some kind. I thought I had a picture of the exact error but I don't.
Click to expand...
Click to collapse
if you still have problems after i can restore a firmware for you
Leronex_1 said:
if you still have problems after i can restore a firmware for you
Click to expand...
Click to collapse
That would be amazing. The unlock company (unlockboot.com) has been pretty quick to reply and wants to at least put it back to stock even if they can't sim unlock it for me but the biggest downfall now is opening up the back of a water resistant phone that's never been apart just to disconnect the battery.
It would likely take months to drain the battery from 100% to get it out of EDL mode.
mkennedy455 said:
That would be amazing. The unlock company (unlockboot.com) has been pretty quick to reply and wants to at least put it back to stock even if they can't sim unlock it for me but the biggest downfall now is opening up the back of a water resistant phone that's never been apart just to disconnect the battery.
It would likely take months to drain the battery from 100% to get it out of EDL mode.
Click to expand...
Click to collapse
This sounds like a very easy fix. You can exit edl by button combination too, you hold vol- and pwr till your fingers hurt. No joke, it will get you out of there, although if it takes that long then it will probably just re-enter edl because it's bricked.
Leronex_1 said:
This sounds like a very easy fix. You can exit edl by button combination too, you hold vol- and pwr till your fingers hurt. No joke, it will get you out of there, although if it takes that long then it will probably just re-enter edl because it's bricked.
Click to expand...
Click to collapse
Yeah I've been trying that over and over again for a couple days now. Even took it with me to work and yesterday I was holding vol - and power while driving between jobs in hopes it would randomly come back. While connected to my computer doing so causes it to disconnect briefly but immediately reconnects via qfil USB mode.
mkennedy455 said:
Yeah I've been trying that over and over again for a couple days now. Even took it with me to work and yesterday I was holding vol - and power while driving between jobs in hopes it would randomly come back. While connected to my computer doing so causes it to disconnect briefly but immediately reconnects via qfil USB mode.
Click to expand...
Click to collapse
That means your device is bricked, it cannot boot therefore only being able to reboot back into edl, I suggest you message me and we will make it bootable.
mkennedy455 said:
Yeah I've been trying that over and over again for a couple days now. Even took it with me to work and yesterday I was holding vol - and power while driving between jobs in hopes it would randomly come back. While connected to my computer doing so causes it to disconnect briefly but immediately reconnects via qfil USB mode.
Click to expand...
Click to collapse
Just write those 4 files in the zip I uploaded with qfil,and then kick it out of edl mode.Leave the usb cable hooked to it and hold volume down and power until you hear it lose connection with your laptop/desktop.As soon as it does,release and hold volume up.It should boot in to bootloader mode and then write the kdz of your choice with LGUP.
surgemanx said:
Just write those 4 files in the zip I uploaded with qfil,and then kick it out of edl mode.Leave the usb cable hooked to it and hold volume down and power until you hear it lose connection with your laptop/desktop.As soon as it does,release and hold volume up.It should boot in to bootloader mode and then write the kdz of your choice with LGUP.
Click to expand...
Click to collapse
I will try this tomorrow. I don't like to attempt this stuff when I'm tired, mistakes can be costly.
mkennedy455 said:
I will try this tomorrow. I don't like to attempt this stuff when I'm tired, mistakes can be costly.
Click to expand...
Click to collapse
Does this method worked for you.
My complete partition is deleted. The phone is in EDL 9008 mode.
Aroy48 said:
Does this method worked for you.
My complete partition is deleted. The phone is in EDL 9008 mode.
Click to expand...
Click to collapse
I never ended up trying it again. I cut my losses and used it for parts for my other phone.