SOLVED : How to increase REMIX OS DATA STORAGE on your USB - Remix OS for PC

IMPORTANT: You need to have a knowledge on using Gparted
Download here: https://gparted.org/download.php and install on CD or USB
I learned the Gparted basics thru Google and Youtube 24hrs ago... lol
Google or Youtube " How to clone a partition using Gparted"
**You need some extra space on a HDD/SSD or USB drive to clone the USB contents created by REMIX OS
**Easy if you have an EXTRA USB flash drive ready to be SETUP for cloning REMIX OS.
--------------------------------------------------------------------------------------------------------------------------------
1. Install Remix OS in USB using the Remix Installer.
or
skip #1 and Use your current REMIX OS USB setup if you already have one.
2. Boot Remix OS and finish setup for newly installed OS. - DO NOT SETUP A PASSWORD YET as you will run into trouble logging in later on - (But a terminal solution can delete the password anyway if you google how to do it.)
NOW you have a copy of REMIX OS running on your USB. Next step, is to CLONE the partitions created by REMIX OS....
3. Next is to Run/Boot Gparted and apply your knowledge in cloning partition.
Example:
I have a new 128GB flash drive and I have made 2 partitions.
1st partition has like, 20GB and the 2nd partition has like 100GB
I have cloned the REMIXOSSYS (original size about 5.28GB) to the 1st partition (20GB)
and have cloned
REMIXOSDATA (original size is 64GB) to the 2nd partition (100GB)
Cloning done.. Boot to REMIX OS and now I have 100GB storage instead of 64GB
Enjoy!

UPDATE: I recommend stay on 5GB partition when cloning the REMIXOSSYS as I run into problem running the OS on a very large partition.

Related

Question: Install Remix on dedicated HDD (No dual boot) ???

I understand how to install Remix onto a bootable USB flash drive. I understand how to format a partition on an existing HDD to dual boot between Windows and Remix.
However, I can not seem to figure out how to install Remix onto a separate HDD from the one that the current OS is on, in order to be put into a separate computer. Basically, I have an old Dell Mini 10 and I want to install Remix OS onto the 120GB HDD, but I do not need any other operating system on it. Is this possible?
If so, how can I deviate from the procedure to install Remix onto a HDD partition that is meant to be stand-alone, not dual boot? I can't be the only person who is trying to do this.
Now you have to make the same installation as Remix os on Virtual machine
Put remix os on bootable usb as usual use official installer when you done restart and boot to remix os
at boot menu press TAP at debug mode
now you modify the command
at the end of the first line make space and insert INSTALL=1 and press F10
now you will create boot partition ext4 GPT/UEFI or MBR and make it bootable
Note
choose sda= internal HDD
sdb=USB
now if you on MBR choose install grub if UEFI skip and install the next grub/UEFI
choose read/write mode
done
imadlatch said:
...
now you modify the command
at the end of the first line make space and insert INSTALL=1 and press F10
...
Click to expand...
Click to collapse
Wow, I can't believe it was actually that simple. Thank you!
imadlatch said:
Now you have to make the same installation as Remix os on Virtual machine
Put remix os on bootable usb as usual use official installer when you done restart and boot to remix os
at boot menu press TAP at debug mode
now you modify the command
at the end of the first line make space and insert INSTALL=1 and press F10
now you will create boot partition ext4 GPT/UEFI or MBR and make it bootable
Note
choose sda= internal HDD
sdb=USB
now if you on MBR choose install grub if UEFI skip and install the next grub/UEFI
choose read/write mode
done
Click to expand...
Click to collapse
I use same method and i allways end up with faild to create data.img and i get promt to run android x86 or reboot. I select to run and pc restart and i get
error:unknown filesystem.
Entring rescue mode...
Grub rescue>
For me there is no possible way to run remix os with any method.
Cpu: Pentium 4 HT 630
Mbo: Intel 915gux
Gpu: Integrated on mbo
Ram: 3GB
xperia u20i said:
I use same method and i allways end up with faild to create data.img and i get promt to run android x86 or reboot. I select to run and pc restart and i get
error:unknown filesystem.
Entring rescue mode...
Grub rescue>
For me there is no possible way to run remix os with any method.
Cpu: Pentium 4 HT 630
Mbo: Intel 915gux
Gpu: Integrated on mbo
Ram: 3GB
Click to expand...
Click to collapse
this method wont create data.img but data folder
make sure you create bootable ext4 partition EFI or mbr up to your bios
Possible? Definitely.
It IS indeed possible, and I have accomplished it on my secondary laptop (Read HERE for how I did it).
@imadlatch The GRUB/GRUB2 install didn't work in my case. I tried the GRUB first, as I'm on a legacy BIOS, and although it did say "Installation Successful", upon reboot, I was greeted with a very nice "OS Not Found" Message. The same happened for GRUB2. So I just went ahead and got an Ubuntu Live USB, and installed the latest GRUB2-Legacy from there. Edited the grub.cfg and everything worked perfectly. 320GB HDD, all for Remix OS. Persistent data, rooted, everything.
@TwistyTravster Did you remove the "CREATE_DATA_IMG=1" from the command line, or just add the "INSTALL=1"? If you didn't remove the data image part, then you should (according to my tests) only have a 4GB /data partition... Or did it allocate the WHOLE HDD? Just interested in seeing how other people with different setups got Remix OS working...
Riccorbypro said:
@TwistyTravster Did you remove the "CREATE_DATA_IMG=1" from the command line, or just add the "INSTALL=1"? If you didn't remove the data image part, then you should (according to my tests) only have a 4GB /data partition... Or did it allocate the WHOLE HDD? Just interested in seeing how other people with different setups got Remix OS working...
Click to expand...
Click to collapse
I just added INSTALL=1 to the end. And yes, I ended up with only 4GB data partition, but I then removed the drive from my netbook, mounted it on my main PC and performed the IMGTools mod to increase data.img file size from 4GB to 256GB of the total 320GB on the harddrive I used. The process took about an hour to complete due to the extremely large size that I was enlarging data.img to. You use the number 274877906944 bytes for the command for 256GB. Considering how well this worked, I bet you could enlarge data.img to literally ANY size... probably larger than you'll ever need. Just imagine a total of 1TB space on Remix OS.... LOL!
The biggest problem I'm having is my old netbook doesn't have the graphics capability for h.264 decoding. So I'm getting a Broadcom Crystal HD decoder for the internal mini PCI-E slot, which should allow better 1080p streaming for movies. I plan to use Moonlight Streaming to stream full quality games from my main Gaming PC to my tiny netbook. It will be pretty hilarious seeing a 10" netbook playing games like Crysis in 1080p (probably downscaled to 720p) at 60fps.
I already have a Mad Catz MOJO in my living room that I stream games and movies to, which has been modded to use Remix 2.0 OS as well.
See here.
TwistyTravster said:
I just added INSTALL=1 to the end. And yes, I ended up with only 4GB data partition, but I then removed the drive from my netbook, mounted it on my main PC and performed the IMGTools mod to increase data.img file size from 4GB to 256GB of the total 320GB on the harddrive I used. The process took about an hour to complete due to the extremely large size that I was enlarging data.img to. You use the number 274877906944 bytes for the command for 256GB. Considering how well this worked, I bet you could enlarge data.img to literally ANY size... probably larger than you'll ever need. Just imagine a total of 1TB space on Remix OS.... LOL!
The biggest problem I'm having is my old netbook doesn't have the graphics capability for h.264 decoding. So I'm getting a Broadcom Crystal HD decoder for the internal mini PCI-E slot, which should allow better 1080p streaming for movies. I plan to use Moonlight Streaming to stream full quality games from my main Gaming PC to my tiny netbook. It will be pretty hilarious seeing a 10" netbook playing games like Crysis in 1080p (probably downscaled to 720p) at 60fps.
I already have a Mad Catz MOJO in my living room that I stream games and movies to, which has been modded to use Remix 2.0 OS as well.
See here.
Click to expand...
Click to collapse
Well, if you feel the need to reinstall, then just remove the CREATE_DATA_IMG=1 - it'll use a folder on your HDD called "data" instead. That is, assuming you formatted to ext4 for the R/W /system... I don't know if the same works on Windows...
Now there's something I would LOVE to see! A 10 inch netbook playing games that aren't Minecraft!!!
I'm using my Secondary Laptop (Toshiba Satellite C660) as an Android PC with Remix at the moment, and that thing RUNS! I think the only thing limiting it is the slow internet at my university...
Anyways, please report back on the games, as I might use that myself...
P.S. It took 5 Minutes to install Remix on my Toshiba when I didn't do the data.img, so I would recommend using it that way...
Riccorbypro said:
Well, if you feel the need to reinstall, then just remove the CREATE_DATA_IMG=1 - it'll use a folder on your HDD called "data" instead. That is, assuming you formatted to ext4 for the R/W /system... I don't know if the same works on Windows...
...
P.S. It took 5 Minutes to install Remix on my Toshiba when I didn't do the data.img, so I would recommend using it that way...
Click to expand...
Click to collapse
So remove CREATE_DATA_IMG=1, and it automatically uses the entire HDD storage instead of only 4GB, as long as it it formatted to EX4? Is that what I'm understanding?
have followed the procedure but i still cannot boot from hdd. my hardware is T61 with 4G RAM, 500G HDD (yes bios not uefi). just a blank screen after bios cannot boot up. any hint?
possible failed to create a bootable ext4 under cgdisk 1.0.0? must use ext4?
Use gparted to create ext4 partition and make USB ready for remix os install then add this to menu.lst
(Unetbootin will do fine)
label ubnentry2
menu label ^Install Remix OS to harddisk
kernel /kernel
append initrd=/initrd.img root=/dev/ram0 androidboot.hardware=remix_x86_64 androidboot.selinux=permissive quiet INSTALL=1 DEBUG=
Change value"androidboot.hardware=remix_x86_64 to remix_x86" if u use 32 bit remix os
Press (ESC) at grub config , select " install remix os to hardisk" follow procedure installation and report back the result here
after you press tab on resident mode, remove everything after "quiet". Then put INSTALL=0 right after quiet and you can install on ext4. if you don't do this, it adds a line in grub that says "USB_USE_DATA=1" which causes the screen to get stuck at the flashing remix screen.
I have a solution with boot error
To install Remix OS directly on HDD without dualboot :
First, to prepare bootloader, install Ubuntu from USB or DVD that format all drive in EXT4.
Once Ubuntu is installed put remix OS usb key which have been prepared and reboot on USB Key.
Install as arts821 says (Thanks arts821)
/kernel initrd=/initrd.img root=/dev/ram0 androidboot.hardware=remix_x86_64 androidboot.selinux=permissive quiet INSTALL=1 DEBUG=
Change value"androidboot.hardware=remix_x86_64 to remix_x86" if u use 32 bit remix os
Press (ESC) at grub config , select " install remix os to hardisk" follow procedure installation and report back the result here
TwistyTravster said:
I understand how to install Remix onto a bootable USB flash drive. I understand how to format a partition on an existing HDD to dual boot between Windows and Remix.
However, I can not seem to figure out how to install Remix onto a separate HDD from the one that the current OS is on, in order to be put into a separate computer. Basically, I have an old Dell Mini 10 and I want to install Remix OS onto the 120GB HDD, but I do not need any other operating system on it. Is this possible?
If so, how can I deviate from the procedure to install Remix onto a HDD partition that is meant to be stand-alone, not dual boot? I can't be the only person who is trying to do this.
Click to expand...
Click to collapse
it work also with one hdd but if your windows is not installed with efi before ,and remove your hdd windows before to install os remix like here https://www.youtube.com/watch?v=gaLbOek1X-g
you dont need to do your partition like me with windows if u have only one hdd remove your hdd windows create one partition primary( 1 )having like 500 mo with os remix and after your partition primary bootable os remix choose yes also all time like me when you choose to format the partition os remix in ext 4 like that it will not found your partition windows ,because your hdd windows is not plug in .
after you need to disable efi for boot on windows or efi enable for boot on os remix
(but sorry u don't need to remove ur hdd really because you can take grub 2 only for efi and skip the grub only not efi during installation...normally it take all time the one like sda1 for her boot efi
and it work well for me because i've windows 7 now + os remix x64 on my ssd , and i've reinstall os remix taking grub 2 efi only and it have not touched my boot windows not efi working only if you have before create a partition 1 for os remix boot efi keeping the 2 for windows not efi
i've try on the pc of my friend a dual boot os remix x64 not efi with windows 7 it work ...it can be windows 10 the problem or my motherboard i'm not sure i will try
it work on the motherboard of my friend with no efi dual boot windows 7x64 + os remix x64 but not on my pc ...really strange
but i prefer boot os remix efi enabled only because i can touch the grub easily

clone USB flash drive to SSD drive

I installed Remix OS on a USB 3.0 flash drive, but the performance is sporadically sluggish. How do I clone my current Remix OS installation to an external SSD (via a SATA/SSD to USB 3.0 enclosure)?
You could use a Clonezilla USB stick in mode "device-image". In a first step you define a "local_dev" (e.g. an USB drive), where you copy your USB installation using "savedisk". In a second step you can run "restoredisk" and copy the saved image to your external SSD.
But why don't you install Remix OS directly to your SSD?
SOLVED! I was able to clone the USB flash drive to external SSD via gparted. I booted off a linux boot disc (System RescueCD 4.7.1), ran gparted, created a msdos partition table on the SSD, copied and pasted the partitions one by one from the USB flash drive and added the "boot" flag to the new partition labeled REMIXOSSYS on the SSD. Booted up on the computer without a hitch and was significantly faster all around.

Full easy instructions for running os remix off usb stick without errors

This is a working usb install media creator method for os remix installation and legacy bios circumventing all known errors made for noobs including USING full drive internal storage space etc.
You will be able to use this usb stick for future creation of other usb install media
you will have the choice to also install to hard drive
you will need 2 x usb drives and require drive write speed to be higher than 10 mb/s
the first drive will be the installer drive and the second will be the actual usb drive used to run remix os.
For first drive basic fat 32 install you will need rufus 2.9 usb boot media creator
after creation of the installer drive keep it safe i reccommend you use a 4gb drive $4/£2 off ebay but get something thats got a write speed higher than 10 mb/s or else install will fail!
Format the second drive to your liking ext 4 for example on your pc with minitool partition or acronis disk manager (make sure the drive is formatted as primary and set to active flag)
1. Create fat 32 usb boot disk with first usb drive and rufus 2.9 and the remix os iso
2.make sure after creation you boot up the usb drive and enter remix os then shutdown and boot it up again to write all config files
3.make sure you dont boot up the ufi version of the boot up, only use the legacy version (it will have ufi next to boot drive in bios usb boot up list)
4.after you enter remix os go to settings and download the update (ota) (this is the main fix)(if this update fails you cannot proceed further with instructions)
5. After ota update reboot and enter remix os again and let android upgrade
6.after this stage is complete your fat32 remix os usb bootable drive is ready to create a usb drive that runs remix os from the drive itself.
7.insert the second drive in a usb hub and boot up the computer with both drives in the computer and boot from the first drive (the usb remix os installer drive)
8.boot up and at the grub boot menu (it should look blue with yellow writing not the black ufi version) press tab and type: INSTALL=1
9. then press enter then you will enter you will enter usb media creation menu select scan usb drives and select the second drive (the remix os running drive)
10. It will ask you what you want to format the drive as so select do not format option (becus you already formatted it)
11.then it will ask you to install first grub boot menu say yes
12. Then it will ask you to install second boot grub efi menu say yes
13. Next it will ask you if you want to format the boot partition or something like that say *** no ***
14. Then it will ask you if you want read/write privelage say yes
15. It will proceed to write the remix os onto the drive
16. When finished it will ask to restart (at this point i just switch the pc off by holding power button then restart and boot off the new second drive to run the os from it already upgraded too)
note: If wanting ntfs version of remix os then its a little complicated than this and you will need to use imgtools to increase the data.img file on the ntfs drive after creation with the first usb media creator drive.
The remix os ota update addresses the boot media creation errors. After the ota update all drives created with the grub menu installer boot up as they should but only ufi boot up option hangs!
Hope this helps hit the thanks dont forget so i know how many people were helped by this! enjoy.
I have the ative pc pro xe700t1c the uk version with intel core i5 quad core and its also a convertible tablet with msata ssd as hdd drive and as you all probbaly know android was created for fast flash memory and linux format os so the best combination is an ssd and ext4 linux file format. I have a 64gb 544 mb/s msata drive in a usb 3.0 enclosure which i use to boot remix os and run it off it. Its perfectly smooth and fast enough and the ativ pc pro convertible laptop/tablet is fully compatible hadware software wise, no problems at all.

Full easy instructions for running remix os off usb stick without errors for noobs

This is a working usb install media creator method for remix os installation and legacy bios + MBR format and not GPT and circumventing all known errors made for noobs including USING full drive internal storage space etc.
You will be able to use this usb stick for future creation of other usb install media
you will have the choice to also install to hard drive
you will need 2 x usb drives and require drive write speed to be higher than 10 mb/s
the first drive will be the installer drive and the second will be the actual usb drive used to run remix os.
For first installer drive it will be basic fat 32 install. you will need rufus usb boot media creator
after creation of the installer drive keep it safe i reccommend you use a 4gb drive $4/£2 off ebay but get something thats got a write speed higher than 10 mb/s or else install will fail!
Format the second drive with the size of your choice to ext 4 on your pc with minitool partition or acronis disk manager (make sure the drive is formatted as primary and set to active flag)
1. Create fat 32 usb boot disk with first usb drive and rufus usb boot media creator and the remix os iso version 2.0402
2.make sure after creation you boot up the usb drive and enter remix os then shutdown and boot up again to write the config files
3.make sure you dont boot up the ufi version of the boot up, only use the legacy version (it will have ufi next to boot drive in bios usb boot up list)
4.after you enter remix os go to settings and download the update (ota) (this is the main fix for version 2.0402 which updates to version 2.0403)(if this update fails you cannot proceed further with instructions unless you have version 2.0403 iso)( this update DOSENT APPLY TO REMIX OS version 2.0403 or 3.0+ INSTALLATION)
5. After ota update reboot and enter remix os again and let android upgrade
6.after this stage is complete your fat32 remix os usb bootable drive is ready to create a usb drive that runs remix os from the drive itself using full drive internal storage space.
7.insert the second drive in a usb hub and boot up the computer with both drives in the computer and boot from the first drive (the usb remix os installer drive)
8.boot up and at the grub boot menu (it should look blue with yellow writing not the black ufi version) press tab and type: INSTALL=1
9. then press enter then you will enter usb media creation menu select scan usb drives and select the second drive (the remix os running drive)
10. It will ask you what you want to format the drive as so select do not format option (becus you already formatted it)
11.then it will ask you to install first grub boot menu say yes
12. Then it will ask you to install second boot grub efi menu say yes
13. Next it will ask you if you want to format the boot partition or something like that say *** no ***
14. Then it will ask you if you want read/write privelage say yes
15. It will proceed to write the remix os onto the drive
16. When finished it will ask to restart (at this point i just switch the pc off by holding power button then restart and boot off the new second drive to run the os from it already upgraded too)
**** Newbie Errors to avoid******
1. make sure you format the drive correctly, sometimes errors at this stage will create errors later on and affect later installation and will create boot up failures
2. i have to stress this once again as once i formatted the same drive with the same settings in minitool partition manager but in different order for example: instead of formatting it ext 4 then applying changes then setting it to primary then applying changes then setting the partition to active flag and applying changes, i did format ext 4 and change partition to primary all at once then applied changes then set it to active flag and applied changes and later after remix os install the usb wouldnt boot saying "missing operating system error" so caution.
3. after you format the drive with ext 4 partition the usb drive will be unrecognizable in windows. (do not use windows unplug usb drive feature to remove the drive, just pull it out)
4. make sure you pull the first installer drive out before booting the newly created ext 4 usb as it may affect boot up
5. sometimes for power saving reasons the screen might go blank while installing as installing takes time dont panic just press power button or any key to revive the system
6. if you dont get a usb drive faster than 10 mb/s then you will have problems if you continue with the installation and alot of system lag
7. its happened to me many times before so listen carefully: if you dont format the drive correctly even the drives transfer write speed can be greatly affected for example i formatted the usb drive and made a mistake but it was not detectable as it said all was fine i think i formatted the usb drive fat32 without first deleating the existing partition (just converted it) then with remix os installation at the stage where you boot up the installed drive for the first time to do a drive write speed test it was telling me the drives speed was below 5 mb/s ( the drive was a lexar p23 usb 3.0 16gb 150 mb/s read 60 mb/s write) and warned me about install failure then i formatted the drive again this time deleting the patition first then applying changes and doing the rest of the steps one by one each time applying changes after only changing one setting then at the remix os installation speed test this time it was reporting 60 mb/s write speeds!
8. remix os works like a charm on intel cpus and intel integrated gpus and i dont have other makes to test so this tutorial is only for legacy bios and intel cpu and gpu (tested all working)
9. This is something so basic but having a data indicator led on your usb drive or usb hub will save you waiting hours! most waiting is due to not knowing whats happening or not knowing if there is an error or not so try and get a usb drive with an led that tells you if the system is currently writing/working to disk and when that led stops blinking for a long period e.g 2 mins then you will know the install has crashed or android is not loading. Also with slower drives the waiting period is longer as the system takes longer to write to the drive (a 544MB/s msata SSD FLASH drive takes 5 secs to install while a usb 3.0, 60 MB/s write drive will take 15 mins) but if you have a data status led which shows its still blinking then atleast you will know the installation/loading is still working and no need to abort it. Also Android os constantly writes to the drive when running so you will see the data status led constantly blink too and if that ever stops you know you have encountered a system crash. Also the led shows how well remix os is running as regards speed of the operating system, for example at the start of loading remix os or when doing a task the led stays constanly blinking RAPIDLY but after loading or finishing the task the led defaults to a blink per second (this is classed as normal operation and healthy) but when the led is constantly blinking RAPIDLY without pauses or stays on for a long time then it means the operating system is not running smoothly as it should and then you should check if theres a problem formatting or if its a fake drive etc.
10. Using slow usb drives or fake usb drives will get very HOT and will cause the error "not responding...wait or close" error while very fast drives will always stay COOL without system lag and errors.
note: If wanting ntfs version of remix os then its a little complicated than this and you will need to use imgtools to increase the data.img file on the ntfs drive after creation with the first usb media creator drive.
The remix os ota update 2.0403 addresses the boot media creation errors of remix os 2.0402 . After the ota update all drives created with the grub menu installer boot up as they should but only ufi boot up option hangs!
Hope this helps hit the thanks dont forget so i know how many people were helped by this! enjoy.
I have the ativ pc pro xe700t1c the uk version with intel core i5 quad core and its also a convertible tablet with msata ssd as hdd drive and as you all probbaly know android was created for fast flash memory and linux format os so the best combination is an ssd and ext4 linux file format. I have a 64gb 544 mb/s msata drive in a usb 3.0 enclosure which i use to boot remix os and run it off it. Its perfectly smooth and fast enough 5 secs to boot and the ativ pc pro convertible laptop/tablet is fully compatible hadware software wise, no problems at all. The 5 year old Ativ pc pro gets 123,000+ score in antutu benchmark same as the latest LG G5 with the latest adreno 530 gpu/snapdragon 820 cpu which costs approx £600 now in retail!!! I bought the Ativ pc pro convertible laptop/tablet for only £200 two weeks ago with accessories (ethernet dock etc) worth alone £100 on its own off ebay!!! On top of all that its also a windows 10 pro convertible laptop/tablet system which on its own without android was initially worth £1200 five years ago and still costing approx £500 even now in retail. So what im trying to say here is that for only £200 i get a £600 android 6.0 laptop/tablet and i also get a £500 windows 10 pro laptop tablet ALL IN ONE. Muahahahahahaha haaaaa hahahaha kekekeke.
http://www.ebay.co.uk/itm/Brand-New...549634?hash=item33bcb8a542:g:UFYAAOSwQItUFG7S ( 128GB Msata SSD 544 MB/s read write )
http://www.ebay.co.uk/itm/231736235624?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT ( USB 3.0 Msata enclosure )
alz_uk said:
This is a working usb install media creator method for remix os installation and legacy bios circumventing all known errors made for noobs including USING full drive internal storage space etc.
You will be able to use this usb stick for future creation of other usb install media
you will have the choice to also install to hard drive
you will need 2 x usb drives and require drive write speed to be higher than 10 mb/s
the first drive will be the installer drive and the second will be the actual usb drive used to run remix os.
For first installer drive it will be basic fat 32 install. you will need rufus usb boot media creator
after creation of the installer drive keep it safe i reccommend you use a 4gb drive $4/£2 off ebay but get something thats got a write speed higher than 10 mb/s or else install will fail!
Format the second drive with the size of your choice to ext 4 on your pc with minitool partition or acronis disk manager (make sure the drive is formatted as primary and set to active flag)
1. Create fat 32 usb boot disk with first usb drive and rufus usb boot media creator and the remix os iso
2.make sure after creation you boot up the usb drive and enter remix os then shutdown and boot up again to write the config files
3.make sure you dont boot up the ufi version of the boot up, only use the legacy version (it will have ufi next to boot drive in bios usb boot up list)
4.after you enter remix os go to settings and download the update (ota) (this is the main fix for version 2.0402 which updates to version 2.0203)(if this update fails you cannot proceed further with instructions unless you have version 2.0403 iso)(DOSENT APPLY TO REMIX OS version 2.0204 or 3.0+ INSTALLATION)
5. After ota update reboot and enter remix os again and let android upgrade
6.after this stage is complete your fat32 remix os usb bootable drive is ready to create a usb drive that runs remix os from the drive itself using full drive internal storage space.
7.insert the second drive in a usb hub and boot up the computer with both drives in the computer and boot from the first drive (the usb remix os installer drive)
8.boot up and at the grub boot menu (it should look blue with yellow writing not the black ufi version) press tab and type: INSTALL=1
9. then press enter then you will enter usb media creation menu select scan usb drives and select the second drive (the remix os running drive)
10. It will ask you what you want to format the drive as so select do not format option (becus you already formatted it)
11.then it will ask you to install first grub boot menu say yes
12. Then it will ask you to install second boot grub efi menu say yes
13. Next it will ask you if you want to format the boot partition or something like that say *** no ***
14. Then it will ask you if you want read/write privelage say yes
15. It will proceed to write the remix os onto the drive
16. When finished it will ask to restart (at this point i just switch the pc off by holding power button then restart and boot off the new second drive to run the os from it already upgraded too)
**** Newbie Errors to avoid******
1. make sure you format the drive correctly, sometimes errors at this stage will create errors later on and affect later installation and will create boot up failures
2. i have to stress this once again as once i formatted the same drive with the same settings in minitool partition manager but in different order for example: instead of formatting it ext 4 then applying changes then setting it to primary then applying changes then setting the partition to active flag and applying changes, i did format ext 4 and change partition to primary all at once then applied changes then set it to active flag and applied changes and later after remix os install the usb wouldnt boot saying "missing operating system error" so caution.
3. after you format the drive with ext 4 partition the usb drive will be unrecognizable in windows. (do not use windows unplug usb drive feature to remove the drive, just pull it out)
4. make sure you pull the first installer drive out before booting the newly created ext 4 usb as it may affect boot up
5. sometimes for power saving reasons the screen might go blank while installing as installing takes time dont panic just press power button or any key to revive the system
6. if you dont get a usb drive faster than 10 mb/s then you will have problems if you continue with the installation and alot of system lag
7. its happened to me many times before so listen carefully: if you dont format the drive correctly even the drives transfer write speed can be greatly affected for example i formatted the usb drive and made a mistake but it was not detectable as it said all was fine i think i formatted the usb drive ext 4 without first deleating the existing partition (just converted it) then with remix os installation at the stage where you boot up the installed drive for the first time to do a drive write speed test it was telling me the drives speed was below 5 mb/s ( the drive was a lexar p23 usb 3.0 16gb 150 mb/s read 60 mb/s write) and warned me about install failure then i formatted the drive again this time deleting the patition first then applying changes and doing the rest of the steps one by one each time applying changes after only changing one setting then at the remix os installation speed test this time it was reporting 60 mb/s write speeds!
8. remix os works like a charm on intel cpus and intel integrated gpus and i dont have other makes to test so this tutorial is only for legacy bios and intel cpu and gpu (tested all working)
9. This is something so basic but having a data indicator led on your usb drive or usb hub will save you waiting hours! most waiting is due to not knowing whats happening or not knowing if there is an error or not so try and get a usb drive with an led that tells you if the system is currently writing/working to disk and when that led stops blinking for a long period e.g 2 mins then you will know the install has crashed or android is not loading. Also with slower drives the waiting period is longer as the system takes longer to write to the drive (a 544MB/s msata SSD FLASH drive takes 5 secs to install while a usb 3.0, 60 MB/s write drive will take 15 mins) but if you have a data status led which shows its still blinking then atleast you will know the installation/loading is still working and no need to abort it. Also Android os constantly writes to the drive when running so you will see the data status led constantly blink too and if that ever stops you know you have encountered a system crash. Also if the the led shows how well remix os is running as regards speed of the operating system, for example at the start of loading remix os or when doing a task the led stays constanly blinking RAPIDLY but after loading or finishing the task the led defaults to a blink per second (this is classed as normal operation and healthy) but when the led is constantly blinking RAPIDLY without pauses or stays on for a long time then it means the operating system is not running smoothly as it should and then you should check if theres a problem formatting or if its a fake drive etc.
10. Using slow usb drives or fake usb drives will get very HOT and will cause the error "not responding...wait or close" error while very fast drives will always stay COOL without system lag and errors.
note: If wanting ntfs version of remix os then its a little complicated than this and you will need to use imgtools to increase the data.img file on the ntfs drive after creation with the first usb media creator drive.
The remix os ota update 2.0403 addresses the boot media creation errors of remix os 2.0203 . After the ota update all drives created with the grub menu installer boot up as they should but only ufi boot up option hangs!
Hope this helps hit the thanks dont forget so i know how many people were helped by this! enjoy.
I have the ativ pc pro xe700t1c the uk version with intel core i5 quad core and its also a convertible tablet with msata ssd as hdd drive and as you all probbaly know android was created for fast flash memory and linux format os so the best combination is an ssd and ext4 linux file format. I have a 64gb 544 mb/s msata drive in a usb 3.0 enclosure which i use to boot remix os and run it off it. Its perfectly smooth and fast enough 5 secs to boot and the ativ pc pro convertible laptop/tablet is fully compatible hadware software wise, no problems at all. The 5 year old Ativ pc pro gets 120,000+ score in antutu benchmark same as the latest LG G5 with the latest adreno 530 gpu/snapdragon 820 cpu which costs approx £600 now in retail!!! I bought the Ativ pc pro convertible laptop/tablet for only £200 two weeks ago with accessories (ethernet dock etc) worth alone £100 on its own off ebay!!! On top of all that its also a windows 10 pro convertible laptop/tablet system which on its own without android was initially worth £1200 five years ago and still costing approx £500 even now in retail. So what im trying to say here is that for only £200 i get a £600 android 6.0 laptop/tablet and i also get a £500 windows 10 pro laptop tablet ALL IN ONE. Muahahahahahaha haaaaa hahahaha kekekeke.
http://www.ebay.co.uk/itm/Brand-New...549634?hash=item33bcb8a542:g:UFYAAOSwQItUFG7S ( 128GB Msata SSD 544 MB/s read write )
http://www.ebay.co.uk/itm/231736235624?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT ( USB 3.0 Msata enclosure )
Click to expand...
Click to collapse
Hey, thanks for the instructions. I managed to use this method to install Remix OS 3.0.102 onto the seconds USB drive on my Macbook Pro. Once the installation process finished I hit Run Android_x86 instead of reboot and it started just fine. The problem is that after I removed the first USB drive with the Remix OS installer and I rebooted the second drive doesn't show up as a boot option. So now I can't get back into it.
Any suggestions?
Thanks,
Daniel
phantasma2983 said:
Hey, thanks for the instructions. I managed to use this method to install Remix OS 3.0.102 onto the seconds USB drive on my Macbook Pro. Once the installation process finished I hit Run Android_x86 instead of reboot and it started just fine. The problem is that after I removed the first USB drive with the Remix OS installer and I rebooted the second drive doesn't show up as a boot option. So now I can't get back into it.
Any suggestions?
Thanks,
Daniel
Click to expand...
Click to collapse
you did the last proccess wrong! you need to follow step 16 properly! It tells you not to run android x86 option or restart option, infact it tells you to switch your pc off then remove the first installer drive then start the pc with the second drive and boot from it. If you run android x86 option at the end it will run but make next boot broken. Please follow instructions carefully.
if you didnt backup your files then you can still boot from it but the boot might not stick unless you reinstall remix os onto the drive again.
do steps 7 to 13 again to the second drive and when you get to step 14 "do you want to write privelage" part just switch the pc off and boot from the second drive again and this time boot should be fixed but might not boot again after that like i said before.
I tried multiple variations and I end up with 2 outcomes (always shut the computer down once the last options was on screen):
1) If I don't tell it to format on step 13 (like in the instructions) I end up not seeing the USB drive as a boot option after restart.
2) If I tell it to format on step 13 I see the USB and I can select it but then I get the Minimal Bash Grub instead of it booting
P.S. I'm doing this with the latest version of Remix OS 3.0.102 on a 2015 Macbook Pro. Have you tested the instructions on a Mac or only a Windows PC?
phantasma2983 said:
I tried multiple variations and I end up with 2 outcomes (always shut the computer down once the last options was on screen):
1) If I don't tell it to format on step 13 (like in the instructions) I end up not seeing the USB drive as a boot option after restart.
2) If I tell it to format on step 13 I see the USB and I can select it but then I get the Minimal Bash Grub instead of it booting
P.S. I'm doing this with the latest version of Remix OS 3.0.102 on a 2015 Macbook Pro. Have you tested the instructions on a Mac or only a Windows PC?
Click to expand...
Click to collapse
All i can say my freind is there are too many numerous variables that can go wrong. all the way from having the correct bios setup and correct boot mode eg legacy or eufi to formatting the drive correctly and using the already complicated and buggered up installer. you just have to trial and error like i did and after a few days i got it all sussed for my pcs (not macs though sorry, not a mac person never was and never will be lol).
the method i have written works 100% for legacy bios and mbr hard disk (not gpt), windows, fast flash drive and for all versions of remix os upto date so far. ive tried it on different flash drives too.
This has to be mentioned , there is alot that jide is doing to prevent users from doing things like what we are doing here now so they are always changing things to make it harder for people to have it their own way! jides way is making money from the masses while our way is a free os! clearly jide will carry on trying to prevent people like us from doing what we want to do such as using full drive internal storage space etc etc. so watch out folks!
Thanks for the answer. I'll just keep trying until I get it to work. There must be way, even if it means learning how to configure grub manually from scratch. It worked just fine on first install until reboot so it has to work somehow.
It would've been nice if Jide provided more info or support on the issue since this is suppose to be a final product. The purpose of free products is to attract attention to other paid products and to their company. That, they have achieved but if said free product is a hacky nightmare full of bugs and lacking documentation it only puts them in a negative light. Then again, in my case this might also be Apple's fault with their closed platform approach and lack of support for certain file systems and standards.
Anyway, have a good night and all the best.
If I manage to get it working I'll be sure to post it here.
i use Unetbootin to install android-x86 or remixos to hdd or usb, easy
Sent from my AOD255 using XDA-Developers mobile app
wizmart said:
i use Unetbootin to install android-x86 or remixos to hdd or usb, easy
Sent from my AOD255 using XDA-Developers mobile app
Click to expand...
Click to collapse
To my understanding the only way to have Remix OS use the entire space of the USB drive is to have it formatted as ext4. Unetbootin cannot use an ext4 formatted drive so yes, I can have it work in multiple ways either using unetbootin or just dd-ing the image to the drive but in both cases I end up with a 4gb storage space in Remix OS. That is why this method seemed like the best one.
hmm..
Yumi also supports android x86 (easyway to make usb stick) and change grub menu
The android installer from XDA hacked version.. seems to create 3 partitions on the USB stick (fat32/ext4/ext4)
-for those how just wish to use a big usbstick.. to run RemixOS (note removing the partitions can not be done with diskmanager from windowz)
any note.. i have on this tuturial... missing: is what if you have nvidia card
then it needs : i915.modeset=0 nouveau.modeset=1 INSTALL=1
Cheers..
phantasma2983 said:
To my understanding the only way to have Remix OS use the entire space of the USB drive is to have it formatted as ext4. Unetbootin cannot use an ext4 formatted drive so yes, I can have it work in multiple ways either using unetbootin or just dd-ing the image to the drive but in both cases I end up with a 4gb storage space in Remix OS. That is why this method seemed like the best one.
Click to expand...
Click to collapse
try and use this windows app to create usb boot disk, it supports uefi bios and legacy bios + 64 bit/32 bit iso and img files. And your right only ext 4 allows full drive internal storage space without modification of any sort out of the box. With NTFS you need to use imgtools to increase the internal storage space.
http://forum.xda-developers.com/android/software/winapp-android-x86-installer-uefi-t3222483
unetbootin can use an ext4 if you use it from linux(ubuntu), from windows you install first to hd on reboot inside unetbootin menu you add INSTALL=1 on your entry then choose usb ext4 on drive choice thats how i do
Sent from my AOD255 using XDA-Developers mobile app
Worked great!
Followed your instructions and loaded Remix OS " Remix_OS_for_PC_Android_M_64bit_B2016091202" version: 3.0.205 onto a Sandisk 128GB USB drive with no problems and full access to entire drive. Using the Remix OS installer only gave 64 GB of Data.
Thank you so much for the guide!

Installation from USB 3 issues. Won't install at all.

Hello, I'm trying to use a 32GB usb 3 stick as a portable OS with persistence. I've downloaded the files and followed the instructions to mount the image on the stick, however when I try to boot, after the GRUB screen I get a couple of error messages. The first is something like:
Cannot detect usb write speed, system may not boot
(it's a brand new USB 3 stick)
Then the second message is:
Cannot enter resident mode, not enough space
(weird as it's a 32GB stick)
The system I'm trying to run it on is a windows 7 Lenovo Thinkpad x131e which has 4GB of ram and uses an i3 u3227U processor.
Please could someone help me? I bought the USB key especially to have a portable OS and am a bit disappointed that nothing is working.
Thanks in advance
you need to provide more information about your setup.
1. GPT or MBR system?
2. EUFI or LEGACY bios?
3. using remix installer or third party installer?
4?what format is the usb thumb drive?
etc etc.
In Portable Boot, Remix OS will create 3 Partition in the boot medium,
First is the Remix System itself (REMIXOSSYS).
Second is the Remix Resident User data partition (REMIXOS DATA).
Third is the Windows-readable partition.
Usually, Remix won't boot from USB v1.0 or Slow Version of v2.0, based on my experience. It needs at least ~16Mbps Read Speed and ~8Mbps Write (v2.0), It's recommended to determine which USB version you use to boot. USB v3.0 is better.
One more is, my 8GB Flash disk are separated to 3 Partition by RemixOS which is 4GB for System, 2GB for Resident User Data and the rest for Windows-readable. But I shrink the System to 2GB and grow Data to 4GB to be able to install my apps inside.
You see? My 8GB USB are separated by 4:2:2, maybe yours too, sometime Remix only Randomize the Size of Resident Data Partition and Windows-readable Partition, and there's a chance that your Resident Partition are created smaller than what Resident mode need to run. It always good to explain your problem more detailed here as I can help some about bootable USB.
Sent from my Coolpad A116 using Tapatalk

Categories

Resources