Today Iam looking for an Equalizer as my new headphones had some problems with a few frequencies. But I didn't find!
Did Sony forget this or am I blind ?
nirvananils said:
Today Iam looking for an Equalizer as my new headphones had some problems with a few frequencies. But I didn't find!
Did Sony forget this or am I blind ?
Click to expand...
Click to collapse
Yeah! they don't have those they used to.
Its all in that Dolby atmos this time.
Click Dolby atmos and all you see in Some Dynamic, Movie, music and Custom. There is an advanced setting which is supposed to have the feature of own setting for the bands.
But Dolby Atmos is only working with wired headphones. Most time I used Bluetooth headphones
nirvananils said:
But Dolby Atmos is only working with wired headphones. Most time I used Bluetooth headphones
Click to expand...
Click to collapse
Dolby atmos works with bluetooth headphones as well. I use it with my WF1000xm3 and WH1000xm2.
Dolby atmos works with headphones, bluetooth headphones and without headphones.
It seems that not all BT Headphones are supported, I tried my Sony MDR-10RBT and now its compatible, also my JBL Reflect 2. But 2 other one aren't. Maybe it's a protocol restriction
Related
Just curious, I noticed my beats audio is 'enabled' and the icon is in the tray with my other buds, and my gaming headphones (using the music app). The deep bass is present as well.
Is that normal? I thought beats audio only was active with the actual beats headphones? Does it just turn on every time you use the music app?
Nope. Any decent headset even car stereos with aux
namebrandon said:
Just curious, I noticed my beats audio is 'enabled' and the icon is in the tray with my other buds, and my gaming headphones (using the music app). The deep bass is present as well.
Is that normal? I thought beats audio only was active with the actual beats headphones? Does it just turn on every time you use the music app?
Click to expand...
Click to collapse
Beats audio enhancement becomes available when ever the headphone jack is used with a stock Rezound.
Yeap its an an audio setting that will work with any headphones or audio system through the 3.5 mm jack, its just that the sound profile is tuned to match the beatz headphone frequency range but will work well with lots of other brands. The jack doesnt tell the phone beatz are plugged, just that a line out is plugged in, just happens that Beatz tuned it to heat suit the exact range of their headphones.
Sent from my ADR6425LVW using Tapatalk
Now if only they would enable it to be used with blue tooth Headphones.
Also i only works with the music app, wish it would also work with Pandora, but oh well! Makes me music sound great!
I have an LG HBS-730 headset that I use with my Note II. Some callers with lower pitched voices sound muffled through the headset. I've found several mods and apps that affect bluetooth music EQ, but non that can apply EQ to bluetooth "in call" audio. I think if i could just boost the treble on the audio I would be able to hear the lower voices. Any suggestions? Thanks.
bakermattd said:
I have an LG HBS-730 headset that I use with my Note II. Some callers with lower pitched voices sound muffled through the headset. I've found several mods and apps that affect bluetooth music EQ, but non that can apply EQ to bluetooth "in call" audio. I think if i could just boost the treble on the audio I would be able to hear the lower voices. Any suggestions? Thanks.
Click to expand...
Click to collapse
I'm using Viper4Android FX and it works great on my phone running Trent's 4.4.2 S5 KK ROM. You'll have to be rooted to use it. It has tons of options to adjust your EQ and I'd bet you could tweak things to get a good sound out of your Bluetooth headset. Here's the link: http://forum.xda-developers.com/showthread.php?t=2191223
*Note - In order to get the driver to install, I had to copy the apk into the "/system/app/" folder and then set permissions to rw-r--r-- (see below pic). I used ES File Explorer to do this.
mattnmag said:
I'm using Viper4Android FX and it works great on my phone running Trent's 4.4.2 S5 KK ROM. You'll have to be rooted to use it. It has tons of options to adjust your EQ and I'd bet you could tweak things to get a good sound out of your Bluetooth headset. Here's the link: http://forum.xda-developers.com/showthread.php?t=2191223
*Note - In order to get the driver to install, I had to copy the apk into the "/system/app/" folder and then set permissions to rw-r--r-- (see below pic). I used ES File Explorer to do this.
Click to expand...
Click to collapse
Thanks for the suggestion. This worked for bluetooth audio (music and podcasts), but not during a call.
bakermattd said:
Thanks for the suggestion. This worked for bluetooth audio (music and podcasts), but not during a call.
Click to expand...
Click to collapse
Darn... that's too bad. I was hoping that would work. Hope you find some other workaround.
This refers to the eragon 2.8 rom that comes with both.
Should only one be used for best sound?
For years I have not bothered with anything like this as I used the poweramp app which comes with its own sound settings that I've been happy with. Can I get better sound using Dolby or viper?
What are your opinions on this?
Both drivers can provide a much better audio if you equalize them correctly.
I prefer viper because you can have a different profile for the speaker, headhones and usb/bluetooth.
With atmos, if you equalize correctly for the speaker, when you listen through the headphones it's messed up with a lot of bass and i end up turning atmos off and on.
Fran Montero said:
Both drivers can provide a much better audio if you equalize them correctly.
I prefer viper because you can have a different profile for the speaker, headhones and usb/bluetooth.
With atmos, if you equalize correctly for the speaker, when you listen through the headphones it's messed up with a lot of bass and i end up turning atmos off and on.
Click to expand...
Click to collapse
Do you use the music player that came with eragon?
If you use a different music player app that has its own eq/tone settings, should I leave them flat/0?
arlrb said:
Do you use the music player that came with eragon?
If you use a different music player app that has its own eq/tone settings, should I leave them flat/0?
Click to expand...
Click to collapse
I am talking about Spotify for music, speaker ok but if a play it in my car's bluetooth audio is a mess.
I noticed same behaviour with youtube in speaker/headphones (can't play youtube in my car yer )
I think best equalizer profile for the speaker has a 'U' form.
arlrb said:
Do you use the music player that came with eragon?
If you use a different music player app that has its own eq/tone settings, should I leave them flat/0?
Click to expand...
Click to collapse
JetAudio Plus with its own 20 band EQ all the way for me.
Just got an LG Rebel L44VL and I'm fine with it except the sound. Very tinny. I sounds like a bumblebee in a cardboard box. Love the sound on my Moto E. Is there a gobal EQ app that will work for ALL apps that produce sound like youtube, vids in the news, Showbox, and radio, mp3's etc? If I can fix the sound issue it's a keeper if not it's probably going to be a deal breaker.
You will need superuser access. Dolby Atmos R6.5 delivers impressive sound, even on the Rebel's modest stock loudspeaker. On Bluetooth and 3.5mm auxiliary audio devices, the sound clarity is amazing. Deep, undistorted lows, warm & rich mids, crisp & distinct highs. The EQ presets suffice, but custom is the way to go for true preference. Last but not least is the Dolby Atmos Surround Virtualizer option, for multi-speaker setup. I love my Moto E sound too. Give Dolby Atmos a try. There are dedicated threads to R6.5 Dolby Atmos for download links.
I bought Creative Muve 1c Bluetooth speaker and I can hear phone calls but no streaming sounds and no MP3 music.
I use Resurrection ReMix 7 with Franco Kernel and some audio mods like Ainur JamesDSP, Ainur Sauron and Ainur Modification Library, and also Audio compatibility path.
The speaker is okay, cause works well with other phone and tablet.
What should I switch in the phone?
Astania said:
I bought Creative Muve 1c Bluetooth speaker and I can hear phone calls but no streaming sounds and no MP3 music.
I use Resurrection ReMix 7 with Franco Kernel and some audio mods like Ainur JamesDSP, Ainur Sauron and Ainur Modification Library, and also Audio compatibility path.
The speaker is okay, cause works well with other phone and tablet.
What should I switch in the phone?
Click to expand...
Click to collapse
Since there are mods, it is difficult to pinpoint. Clean flash the Rom and Gapps only and check. If it works, add the mods one by one and check which one breaks it. There is no substitute for hard work.
OMG, there's no fast diagnosis resolution?
I made my phone perfect, from desktop to app settings, all day of work, flashing again all things will be next day of work:'(