Hi
i would flash my old tablet with rom stock, but i not found there.
can you help me ?
antutu data :
Brand : ALPS
model : SH-7208
Board : N932
Material : mt6572
Android : 4.2.2
CPU : VFPv4,Neon (dual core ARMv7 Processor)
GPU : Mali-400 MP
thanks for your help
Related
I have a Symphony T8i Tab.
Manufacturer : Alps
Brand : Alps
Model : Xplorer T8i
O.S Version : Android 4.0.4
Processor : ARMv7 Processor Rev 0 (v7l)
Memory Capacity : 927 MB
Screen : 768x976
Baseband: MAUI.11AMD.W12.22.SP.V9, 2012/09/21 16:21
BootLoader: unknown
SIM : Dual SIM (GSM + 3G)
Please help me if anyone know the possibility to upgrade its ICS 4.0.4 to 4.2.1 Jelly Bean.
Thanks
Hello everyone , I apologize because while certainly wrong to write something.
I was treated to a perfect copy of a iphone5 , but I do not know what model it is. The problem is that there is no Italian language , there is a version of ios installed via Android . I think an update to this rom in Italian there is not , I would be fine to just put android clean.
I put all the information I have, if anyone can help me to change rom or something, thank you very much
Info from Phone
Name : iPhone5
Build number: 6.0 ( 10A403 )
Model number : MD298ZP
Info from Antutu Benchmark
Brand : alps
Model: iphone5
OS : 4.2.1
SDK Version: 10 ( 2.3.3)
Linux kernel version 2.6.35.7
CPU: ARMv7 Processor ( VFPv3 , NEON )
GPU : PowerVR SGX 531
Resolution: 640x1138
Camera: 8Mpx
Ram: 2047mb
Info from Antutu Tester
CPU frequency: 1998.84
manifature cpu : mt6589
Version: ALPS.GB2.MP.V2
Info from factory mode
BB Chip: MT6575
MS board . signal175_gb2
modem ver : MAUI.11AMD.W11.50.SP.25
bar code: MT01234567890123456710
UBoot ver : 2010.06
Custom Build Versno : 1363788928
The copy is 1:1 iphone, but that model ? Zoophone , goophone , yoohone do not understand
Nothing ?
I think this is goophone i5 but i'm not sure
Sent from my H9500S using xda app-developers app
Model number : huawei G 610 - u20
CPU : quad core 1.2 GHz
Android version : 4.2.1
Emotion ui version : emotion ui 1.6
Kernel version : 3.4.5
[email protected]#1
Build number : g610-u20v100roo1c00b115
How to install cwm ?
Please help ......
Model number : huawei G 610 - u20
CPU : quad core 1.2 GHz
Android version : 4.2.1
Emotion ui version : emotion ui 1.6
Kernel version : 3.4.5
[email protected]#1
Build number : g610-u20v100roo1c00b115
I would like to root it . This is my antutu benchmark .
Brand : Apple
Model : X
Device: dream2qltesq
Device: APPLE A11
Board :Apple A11
Android: 7.0 (32 bit)
CPU Model : Quad Core ARMv7 Processor (VFPv4,NEON)
Renderer : Mali-400 MP
Resolution : 720x 1498
Rear : 12.2 MP 4032x3024
Confuse over a tablet firmware Model : Penta Bsnl WS1001Q.
My problem is i don't know which firmware is needed for a tablet. I don't know if the tablet is a real penta WS1001q or not. Because when I
disassembled the phone and i found that the motherboard has a different references ""KSD1011MB_V1.0"".
Cpu-Z display show different picture, Full_gs702a
So my question is can i use the Firmware of "Penta bsnl WS1001q" which avaible on the First result of google or use the KSD1011MB_V1.0 reference which was engraved on the motherboard? . Or use the full_gs702a version which CPUz gave me.
For the KSD1011MB_V1.0 , i can't get the exact firmware for it. Google do not have it. like it does not exist.
Here some information i know:
1)
tm7029 chipset
The Model of the Tablet is Penta Bsnl ws1001q
KSD1011-v 1.0_8G-TN
201312110202652
KSD1011MB_V1.0 written on the motherboard.
2)
CPU-Z information.
ATM7029
gs702a
Model : WS1001Q (full_gs702a)
Manufacturer : unknown
Board : full_gs702a
Hardware : gs702a
Android Ver. : 4.2.2
Kernel Arch. : armv7l
CPU 0 : ARMv7 Processor rev 1 (v7l)
Name : ARM 0xffffffff
CPUs : 4
Core set 0 : ARM 0xffffffff
Core set 0 Nb Cores : 4
Core set 0 Max Clock : 1200 MHz
Core set 0 Impl.id : 0x41
Core set 0 Arch.id : 0x7
Core set 0 Var.id : 0
Arch : 4x ARM 0xffffffff @1.20 GHz
Codename :
GPU Vendor : Vivante Corporation
GPU Renderer : GC1000+MP core
jellybean_atm7029_10_a_4_2_130521.fw
Help please, i want to find a firmware that will work and can be put on sdcard and Apply update via android's recovery mode.
have you been able to get a proper Firmware for this >>