Hey,
I need some help with my controller, here is the issue:
I have a controller (freebox controller) which is connected by an OTG cable to my Honor 10 lite (not rooted bc it's almost impossible). Analog sticks and other buttons work fine but not 1,2,3,4. The games I play ask me to press A, B, Y, or X but I only have 1234 and they don't do anything. Does someone have a solution ?
Related
Greetings!
Like the title says i got an adaptator usb for ps2 controllers, it works great but the only thing that's missing is that detects the right stick, i don't have to do anything else to make it work on emulators -FPSE and N64doid tested- more than installing usb host controller, i tried the USB/BT Joystick center app (test version) and same as native, it detects all except for the right stick.
Any ideas on how can i set this?
ROM: CyanogenMode 9
Tablet: Momo9
PS: It has 2 slots for controllers, both are detected when plugged in but the problem is neither right stick work.
Hi, I'm wondering is there any way to force atrix games to work with some gamepads different than PS.
Today I installed Need For Speed Most Wanted and game is nice but it's hard to drive turning phone or on that little stering wheel.
So I have HD Dock and tried it with Xbox360 wirelles pad with original USB adapter but phone said that it's not compatibile USB device. I tried same thing with Ligitech Cordless Rumblepad 2 and there is no error message about USB Device and adapter blinking when i hit buttons but no reaction on the phone. I know i should use some emulator but none from market is working.
I don't wanna buy PS pad only to play few games so I figured that maybe somehow I can use USB keyboard to play.
So maybe someone have some emulator to remap keys on USB keyboard to work with NFS??
International Atrix, 2.3.4, non rooted, locked. Ofc I can root phone if it's needed.
I'm sure there's apps to remap keyboard.
Also try a wired Xbox controller not the wireless one and not the charge kit.
Sent from Moto Atrix 4g on Neutrino 2.91
I just have Xbox360 wireless pad and Logitech Cordless Rumblepad 2 and I'm trying to avoid buing 3rd pad only for Atrix cause it have no sense.
Thats why I'm trying to deal somehow with what I have.
There is a guide in another forum that was posted a while back on how to edit your rom to have it read the wireless controller as a wired one and apply the same profile to it, I suggest you search for it and try it.
I tried plugging my wired Xbox 360 controller on my lapdock using CM9 (Yes it was open) but it didn't stop blinking... I don't even know if the USB supports other things than USB storage on the Atrix.
USB keyboard and usb wireless mouse working fine so it supports more than memory sticks. As I said before adapter from Logitech pad is not shows as unsupported USB device like Xbox adapter but I have no idea how force it to work. I read that most working pad emulators isn't working on Gingerbread so maybe it's the problem.
If the USB pad in question supports the HID protocol, you could be in luck. Otherwise, you're probably screwed.
Thats right, completely forgot about HID. If I'm not wrong all HID devices should work. I'll check that Logitech pad but as I remember under windows it's discoverable without any Logitech drivers so maybe it gonna works. Otherwise any tweak to remap keyboard to work with games?? I know keys can be remap from /system/... but I don't need to remap keys permanently but only for few games so it can work even on some emulator.
I'm wondering that anyone work it out how play games on external keyboard yet cause it could be very easier than typing on screen or rotating phone and now smartphones are bigger and bigger and it would be very comfortable to play on full keyboard and big screen.
It's easy to add usb support for the joystick/gamepad generic and xbox controller but you need to recompile the kernel avec joystick and xpad module.
I'm working on a keys mapper for the 360 controller and I built a kernel for that but I shared it only at french users on a other forum ...
It's only the kernel build with this source : http://sourceforge.net/projects/atrix.motorola/files/Atrix EMEA/4.5.2A-74_OLE-20/
And 2 or 3 options to get ntfs, cifs, ext4, it is not unified and I have build a little software with java 7 in french to add the command line in it with tegra part and serial as a original.
It works fine on the retail fr 2.3.4 rom.
If you want to try it : http://dl.dropbox.com/u/11889182/kernel/Kernel_2.6.32.9_djeman_v1.0.rar
And the original thread : http://forum.frandroid.com/topic/12...adjoystickxpadcifsutf-8ext4ntfs/#entry2078963
I don't found any good mappers for the 360 controller on the market so I'm working on mine.
If others peoples are interessed by it, I will make a translated version and a subject here.
I can confirm that my regular (not wireless) Logitech controller works fine, although not with all games.
Connected to a Lapdock.
heres what i discovered from experience.
Chamelleon said:
Hi, I'm wondering is there any way to force atrix games to work with some gamepads different than PS.
Today I installed Need For Speed Most Wanted and game is nice but it's hard to drive turning phone or on that little stering wheel.
So I have HD Dock and tried it with Xbox360 wirelles pad with original USB adapter but phone said that it's not compatibile USB device. I tried same thing with Ligitech Cordless Rumblepad 2 and there is no error message about USB Device and adapter blinking when i hit buttons but no reaction on the phone. I know i should use some emulator but none from market is working.
I don't wanna buy PS pad only to play few games so I figured that maybe somehow I can use USB keyboard to play.
So maybe someone have some emulator to remap keys on USB keyboard to work with NFS??
International Atrix, 2.3.4, non rooted, locked. Ofc I can root phone if it's needed.
Click to expand...
Click to collapse
Custom ROM (cm9+) and stock roms ...with many kernel changes, I've always had same result.
1stly on the Atrix, unlike most tablets, the USB port doesn't give any power to the device.
I tried an otg cable with no luck so I modified it so power ran through the cable.
I also have a multimedia dock which produced the same result.
I can run and mount usb devices (storage) so I can transfer data or watch films; mounting is aided by a USB host app on the play store.
Any time something like a Xbox game pad is inserted dmesg shows it was noticed but not identified, so it doesn't look like it will work without manually adding the drivers/modules to support the device.
I have a friend with a nexus 7; Xbox control will work on that with a basic otg cable; only need to map the gamepad keys and in some cases such as emulation apps the keys are already mapped.
I tried connecting a pendrive, a mouse and a keyboard through an OTG adapter and they all worked fine.
However, I couldn't get my wired xbox 360 controller to work. The device doesn't show any sign that it's trying to detect it.
I also tried connecting a usb SNES-ripoff controller that I had laying around and it actually worked right away, but half of the buttons on it wouldn't get registered on any emulator I tried.
Has anyone managed to properly connect a wired xbox controller to their Redmi Note 2?
i tried to connecting the wireless one (im not have the wired version), and tried this tutorial, and can't get it work. I think its because original kernel not support it, its lack of xpad.ko module.
and im sure the wired one can't work too, because there was not key layout for xbox controller in /system/usr/keylayout/. yeah we can copy it manual, but our kernel not support.
CMIIWsorry for bad english.
Hello, everyone!
As I have not found anything on this, neither on XDA, nor using friend Google, I'm posting this hoping to find a solution.
So I have an original PS4 bluetooth controller and it works like a charm with other devices (Win 8.1 laptop, K1 Shield on Android 7, Sony ZX2 on Android 8). but not on the M5.
Trying to pair it with the M5 first brings up an error message "Pairing failed Incorrect pairing key or the device you want to pair with is configured incorrectly. Tray again after viewing Help." ... which doesn't help.
A second attempt will then magically pair the device, but to no effect. It is shown as paired and coected, but will not work with the tablet and apps supporting controllers will not recognize that a controller is connected. Also the controller itself shows the "idle" instead of the "connected" light.
So, does anyone have any ideas how to solve this? I re-paired the controller with all other devices, just to make sure, and it worked. So the controller is still functioning.
If it's anything like the DS3 (dual shock 3) then the controller is very finicky and requries custom software. There's probably an app for it, the Sony phone will have the driver pre installed because it's sony, and probably the shield too.
If it's connected, then yeah there's no hardware fault, just needs the driver.
Michaelflat1 said:
If it's anything like the DS3 (dual shock 3) then the controller is very finicky and requries custom software. There's probably an app for it, the Sony phone will have the driver pre installed because it's sony, and probably the shield too.
If it's connected, then yeah there's no hardware fault, just needs the driver.
Click to expand...
Click to collapse
Well, PS3 controllers truly are difficult to set up, but not so PS4 controllers: Turn on bluetooth, put them into pairing mode, pair, done. I had my PS3 controller with Sixaxis running after much hassle but the PS4-one is really easy to set up. And I did it on multiple Android devices.
And then comes the M5 ...
By the way: Sixaxis does not support the M5.
Yeah I did notice the same thing on my M5 Pro.
I wanted to play the odd mame game with it, and as you say it paired on the 2nd attempt, but I couldn't get any controls to respond to any buttons/triggers etc.
I haven't tried using an OTG cable to see if it will work via cable, but disappointing that it connects but still doesn't work.
Can confirm that DualShock 4 and wired Switch controllers work with a USB C OTG cable.
Hi, it looks like that the Pad have a general Problem with Bluetooth controllers, because i tried a snakebyte controller:vr and the controller hangs or it is "endless scrolling" and in games very unprecise. the same Controller work with a P20 Pro like charm. So it looks like the Problem ist the m5 Pro. Oh, and the same with the PS4 Controller M5 + wired Ps4 working, M5 + Bluetooth PS4 "He´s dead jim", P20 Pro wired/bluetooth Ps4 working.
KleinerKObold said:
Hi, it looks like that the Pad have a general Problem with Bluetooth controllers, because i tried a snakebyte controller:vr and the controller hangs or it is "endless scrolling" and in games very unprecise. the same Controller work with a P20 Pro like charm. So it looks like the Problem ist the m5 Pro. Oh, and the same with the PS4 Controller M5 + wired Ps4 working, M5 + Bluetooth PS4 "He´s dead jim", P20 Pro wired/bluetooth Ps4 working.
Click to expand...
Click to collapse
just anyone connect the ps4? i have the same problem :\
dudestone said:
just anyone connect the ps4? i have the same problem :\
Click to expand...
Click to collapse
Is there something new about this issue? Someone tried with custom rom?
Hey guys,
So I recently bought a Hama USB hub, which connects to my phone with usb type c and its working fine with mouse and keyboard but not with a controller. I see the mouse cursor if I plug in, I can click on things etc... If I connect the controller it gets power but the games dont detect them. It only works with Steam Link which is weird. I tested it on 2 phone, Honor 10 and Mi Mix 2. I have a wireless xbox 360 controller and a wired Logitech F310. Please help, cant find a proper answer on google.