Hi everybody,
My V10 H960a won't turn on after I flashed it with a DZ file via LGUP. I can't even put it into download mode anymore. When I plug it into the computer, it comes up with USB device not recognised.
Can anyone help please?
Use testpoint method and unbrick with octoplus box
Related
i have recently unbrick my phone by jtag repair when i tried to put in emergency mode it enter octopus mode .... I want to change the rom it is on . SO help me any suggestions
Hello, I tried to flash TWRP recovery, but something went wrong, soo in fastboot i had "fastboot mode started/usd start()".
Tried to fix this but it wasnt working, so i decided to flash new KDZ in download mode. Got .tot file and flashed it, but seems that it was wrong .tot file not for LG L9 II. So now my phone dont have download mode, only black screen. When i connect to pc it shows qualcomm hs usb qdloader 9008 (COM 19). Any ideas how to fix this??? Thanx for help
Hello everyone,
i read this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and try to unbrick my hardbricked D855. I recently installed Marshmallow 30c and then it bricked. As described in the guide i need the TOT File belonging to the used firmware. Is it possible to use the 30b files? Any other suggestion?
Best regards
Hi
Did you managed to unbrick your lg g3 ?
I am having the same problem
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 mode,
kindly help me if you can
I've sended to LG under warranty. I'm excited if they repair it.
If you have no warranty then follow the following, it's very good. Google for "open-freax.fr lg g3" and follow the guide.
Screen black, no Samsung logo or anything. It won't load in to download or recovery mode.
when I connect in to pc it identify it as EMEI without driver.
I saw somewhere that I can revive it via sp flash tool but I need scatter file.
And unbrick stuff is an option too but I didn't find one for my phone
Have any idea how to unbrick it ?
Please. No jtag , I doesn't have one
i have lg v10 h901 tmobile with fl600 board. Today i flashed 6.0 firmware in it with lg up but i think it was corrupted because after completion phone turned off and when i plugged usb cable it showed qualcomm 9008 mode after that i converted kdz to dz and extracted dz with lg firmware extractor and downloaded it with the help of qfil in qualcom mode but after completion my phone didnt start and not showing any usb connection in pc but when i press power button it vibrates like its starting but nothing happens now i m confused how to delete that corrupted files from my phone bcz its not going to qualcom mode someone plz help.
farazkhan47302 said:
i have lg v10 h901 tmobile with fl600 board. Today i flashed 6.0 firmware in it with lg up but i think it was corrupted because after completion phone turned off and when i plugged usb cable it showed qualcomm 9008 mode after that i converted kdz to dz and extracted dz with lg firmware extractor and downloaded it with the help of qfil in qualcom mode but after completion my phone didnt start and not showing any usb connection in pc but when i press power button it vibrates like its starting but nothing happens now i m confused how to delete that corrupted files from my phone bcz its not going to qualcom mode someone plz help.
Click to expand...
Click to collapse
As far as I know, the extracted dz renders bin files for partitions. So how did u flash them using qfil/qpst? Doesn't qfil require mbn and XML files instead?