First of all this is my first thread here in XDA and I searched as far as I can to find an answer but didn't got it that's why I'm posting here.
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
You're the only people I know who can help me this forum has done wonders for me.
Please help me .. Thanks in advance.
Update : Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition please can any one help.
ZTE
sandmaan said:
First of all this is my first thread here in XDA and I searched as far as I can to find an answer but didn't got it that's why I'm posting here.
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
You're the only people I know who can help me this forum has done wonders for me.
Please help me .. Thanks in advance.
Update : Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition please can any one help.
Click to expand...
Click to collapse
Hello Sandmaan, can you please help me? I'm in the same situation as you except i did a wrong rom update (one from blade - i have ZTE v9 light). Now i can't even start it no FTM no virbation no android screen no response except that red led light witch when i plug in the charger keeps beeping fast. Have any ideea how to get into FTM mode? The button combination doesn't work.
Thanks
http://forum.xda-developers.com/showthread.php?t=1706918
FTM Mode
jiffer1991 said:
http://forum.xda-developers.com/showthread.php?t=1706918
Click to expand...
Click to collapse
OK, back in FTM mode.
Found the fastboot exe linked to here http://dottech.org/t...-android-phone/ (does not seem to be included in the sdk nowadays ref. http://developer.and.../sdk/index.html, and adb would not recognise the Racer - could have messed around with installing the sdk drivers but didn't get round to this, e.g. , http://www.addictive...all-it-android/).
Booting the Racer with vol- down did not work (fastboot couldn't see it), but booting with vol+ and fastboot found a fastboot device.
The command to reflash:
>fastboot.exe flash recovery recovery.img
(image downloaded from http://raceroms.co.u....php/stock-roms)
Useful reference page here http://wiki.cyanogen...m/wiki/Fastboot
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
Hello everyone,
First time here and completely lost with my Coolpad F2.
Tried to flash recovery this way it is described here:
movilesdualsim.com_tema_coolpad-f2-cambiar-recovery-cmw.88858
sorry, cannot put the link to the outside page yet
but after restarting the phone I got the message:
Image signature verify fail
and the start-up logo of the F2. Pretty much this is it, the phone turns off. I can't get into the recovery either as it shows the same message each time I want to turn it on. I guess it's bricked somehow and I must have done something wrong with the tutorial.
Does anybody have any idea how do tackle it?
If some more information is needed just let me know - I'm completely new to this and don't exactly feel there can be a cure for that.
thanks.
anyone?
Try to search on needrom http://www.needrom.com/category/coolpad/page/2/ maybe you can find a solution here.
Maybe you already try to write that recovery, can you factory reset from the recovery?
Hello there, here https://www.facebook.com/tw101.rom.factory
you can find the Recovery and the original firmware to unbrick the phone, to put the phone in fastboot:
1. Press Volume UP + Power
2. Insert cable.
Make sure you've the fastboot driver installed in the drivers.
as reported on http://www.movilesdualsim.com/ you must install the right adb drivers PDAnet
http://junefabrics.com/android/downloadold.php
If you are interested
snake664 said:
Hello there, here https://www.facebook.com/tw101.rom.factory
you can find the Recovery and the original firmware to unbrick the phone, to put the phone in fastboot:
1. Press Volume UP + Power
2. Insert cable.
Make sure you've the fastboot driver installed in the drivers.
as reported on http://www.movilesdualsim.com/ you must install the right adb drivers PDAnet
http://junefabrics.com/android/downloadold.php
Click to expand...
Click to collapse
Hi there Snake, if you are interested, please join this thread
Firstable, i'm new to this forum so feel free to move my topic to the appropriate thread.
Hi, I need some help. I was given a bricked phone that I would like to fix.
phone: alcatel one touch pop S3 5050x
-Infinite boot loop when powered on
-it does not start with power button , only with the usb plugged in
-i have access to fastboot mode but not adb or recovery (i think USB debugging is disabled)
-when i try to flash CWM or use " fastboot boot recovery.img" i get weird white lines, like a lcd issue but the lcd seems fine, then it starts boot looping again and again
-i cannot find any stock rom in order to get clean boot.img, recovery.img and system.img and flash them
-i only found a TWRP backup but i cannot access any recovery mode or boot on it via fastboot
-converting TWRP backup files (.ext4.win) in .IMG files may help me
-Mobile upgrade won't detect the phone so it cannot download the appropriate ROM
-there is only a few files related to this phone, that's why it's so difficult to solve this.
I really need your help, i think every android brick/ bootloop is a challenge and i want to achieve it. :fingers-crossed:
English isn't my native language, i apologize for language mistakes.
Hi I followed a guide in order to root my phone Mediatek Ulefone armor x2.
Code:
fastboot flash recovery [filename.img]
Code:
fastboot boot recovery [filename.img]
Code:
fastboot reboot
But now it is stuck in a bootloop saying: Android Orange State Your device has been unlocked and can't be trusted.
I can't force shutdown the device and also I can't restart in recovery mode with VolumeUP + PowerButton because it's restart in bootloop.
Also I've tried to plug in USB on a PC but adb don't recognize my device.
How can I do?
did anything work as i have the same problem please reply
Your best bet may be to reflash the stock OS. What's your device model, as well as the steps you used to unlock your bootloader? I may be able to help fix the problem
I have the same problem too. My device is a tablet. Brand CHUWI Hi9 Plus. Can someone help me?
LOLLO.EXE? said:
I have the same problem too. My device is a tablet. Brand CHUWI Hi9 Plus. Can someone help me?
Click to expand...
Click to collapse
do you fixed this problem?