Hello there!
On clean Havoc 2.8 install, in storage i has 12GB under system!
Like instruction here https://forum.xda-developers.com/nexus-4/general/guide-increase-nexus-4s-partition-space-t3800264 i try to look at partition on device.
clover:/ # ./parted /dev/block/mmcblk0 p
Model: MMC DH6DAB (sd/mmc)
Disk /dev/block/mmcblk0: 62.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 67.1MB 70.8MB 3670kB xbl
2 70.8MB 74.4MB 3670kB xblbak
3 74.4MB 78.6MB 4194kB tz
4 78.6MB 82.8MB 4194kB tzbak
5 82.8MB 83.4MB 524kB rpm
6 83.4MB 83.9MB 524kB rpmbak
7 83.9MB 84.4MB 524kB hyp
8 84.4MB 84.9MB 524kB hypbak
9 84.9MB 85.5MB 524kB pmic
10 85.5MB 86.0MB 524kB pmicbak
11 86.0MB 88.1MB 2097kB fsg
12 134MB 201MB 67.1MB boot
13 201MB 3423MB 3221MB ext2 system
14 3423MB 5570MB 2147MB ext2 vendor
15 5570MB 5571MB 1049kB keymaster
16 5571MB 5572MB 1049kB keymasterbak
17 5572MB 5573MB 1049kB cmnlib
18 5573MB 5574MB 1049kB cmnlib64
19 5574MB 5575MB 1049kB cmnlibbak
20 5575MB 5576MB 1049kB cmnlib64bak
21 5576MB 5581MB 4194kB mdtpsecapp
22 5581MB 5585MB 4194kB mdtpsecappbak
23 5585MB 5618MB 33.6MB mdtp
24 5618MB 5652MB 33.6MB mdtpbak
25 5652MB 5920MB 268MB fat16 modem
26 5920MB 6189MB 268MB fat16 modembak
27 6189MB 6205MB 16.8MB ext4 dsp
28 6205MB 6222MB 16.8MB ext4 dspbak
29 6222MB 6223MB 1049kB abl
30 6223MB 6224MB 1049kB ablbak
31 6224MB 6225MB 1049kB dip
32 6225MB 6225MB 4096B devinfo
33 6225MB 6226MB 262kB apdp
34 6226MB 6226MB 262kB msadp
35 6226MB 6226MB 1024B dpo
36 6226MB 6260MB 34.2MB splash
37 6260MB 6260MB 4096B limits
38 6260MB 6261MB 1049kB toolsfv
39 6308MB 6317MB 8389kB logfs
40 6375MB 6376MB 1049kB ddr
41 6376MB 6376MB 16.4kB sec
42 6376MB 6377MB 1049kB bluetooth
43 6377MB 6379MB 1049kB bluetoothbak
44 6442MB 6442MB 1024B fsc
45 6442MB 6442MB 8192B ssd
46 6442MB 6445MB 2097kB modemst1
47 6445MB 6447MB 2097kB modemst2
48 6447MB 6480MB 33.6MB ext4 persist
49 6480MB 6749MB 268MB ext4 cache
50 6749MB 6750MB 1049kB misc
51 6750MB 6817MB 67.1MB recovery
52 6817MB 6817MB 524kB keystore
53 6817MB 6818MB 1049kB devcfg
54 6818MB 6819MB 1049kB devcfgbak
55 6819MB 6820MB 524kB frp
56 6820MB 6887MB 67.1MB logdump
57 6887MB 6889MB 2097kB sti
58 6912MB 6912MB 131kB storsec
59 6979MB 7114MB 134MB rawdump
60 7114MB 7114MB 65.5kB vbmeta
61 7114MB 7114MB 65.5kB vbmetabak
62 7181MB 8053MB 872MB ext4 cust
63 8053MB 8087MB 34.2MB logo
64 8087MB 62.5GB 54.4GB userdata
Is there useless partitions, and can somebody help to resize it, maybe delete some and use more storage under sdcard? Or maybe all 12Gb is used?
This is the reported allocation on my device:
# fdisk -l /dev/block/mmcblk0
Found valid GPT with protective MBR; using GPT
Disk /dev/block/mmcblk0: 122142720 sectors, 2296M
Logical sector size: 512
Disk identifier (GUID): de1c6fbc-8d97-ad88-8aba-dd5af5595598
Partition table holds up to 64 entries
First usable sector is 34, last usable sector is 122142686
Number Start (sector) End (sector) Size Code Name
1 131072 138239 3584K 0700 xbl
2 138240 145407 3584K 0700 xblbak
3 145408 153599 4096K 0700 tz
4 153600 161791 4096K 0700 tzbak
5 161792 162815 512K 0700 rpm
6 162816 163839 512K 0700 rpmbak
7 163840 164863 512K 0700 hyp
8 164864 165887 512K 0700 hypbak
9 165888 166911 512K 0700 pmic
10 166912 167935 512K 0700 pmicbak
11 167936 172031 2048K 0700 fsg
12 262144 393215 64.0M 0700 boot
13 393216 6684671 3072M 0700 system
14 6684672 10878975 2048M 0700 vendor
15 10878976 10881023 1024K 0700 keymaster
16 10881024 10883071 1024K 0700 keymasterbak
17 10883072 10885119 1024K 0700 cmnlib
18 10885120 10887167 1024K 0700 cmnlib64
19 10887168 10889215 1024K 0700 cmnlibbak
20 10889216 10891263 1024K 0700 cmnlib64bak
21 10891264 10899455 4096K 0700 mdtpsecapp
22 10899456 10907647 4096K 0700 mdtpsecappbak
23 10907648 10973183 32.0M 0700 mdtp
24 10973184 11038719 32.0M 0700 mdtpbak
25 11038720 11563007 256M 0700 modem
26 11563008 12087295 256M 0700 modembak
27 12087296 12120063 16.0M 0700 dsp
28 12120064 12152831 16.0M 0700 dspbak
29 12152832 12154879 1024K 0700 abl
30 12154880 12156927 1024K 0700 ablbak
31 12156928 12158975 1024K 0700 dip
32 12158976 12158983 4096 0700 devinfo
33 12158984 12159495 256K 0700 apdp
34 12159496 12160007 256K 0700 msadp
35 12160008 12160009 1024 0700 dpo
36 12160016 12226863 32.6M 0700 splash
37 12226864 12226871 4096 0700 limits
38 12226872 12228919 1024K 0700 toolsfv
39 12320768 12337151 8192K 0700 logfs
40 12451840 12453887 1024K 0700 ddr
41 12453888 12453919 16384 0700 sec
42 12453920 12455967 1024K 0700 bluetooth
43 12455968 12458015 1024K 0700 bluetoothbak
44 12582912 12582913 1024 0700 fsc
45 12582920 12582935 8192 0700 ssd
46 12582936 12587031 2048K 0700 modemst1
47 12587032 12591127 2048K 0700 modemst2
48 12591128 12656663 32.0M 0700 persist
49 12656664 13180951 256M 0700 cache
50 13180952 13182999 1024K 0700 misc
51 13183000 13314071 64.0M 0700 recovery
52 13314072 13315095 512K 0700 keystore
53 13315096 13317143 1024K 0700 devcfg
54 13317144 13319191 1024K 0700 devcfgbak
55 13319192 13320215 512K 0700 frp
56 13320216 13451287 64.0M 0700 logdump
57 13451288 13455383 2048K 0700 sti
58 13500416 13500671 128K 0700 storsec
59 13631488 13893631 128M 0700 rawdump
60 13893632 13893759 65536 0700 vbmeta
61 13893760 13893887 65536 0700 vbmetabak
62 14024704 15728639 832M 0700 cust
63 15728640 15795487 32.6M 0700 logo
64 15795488 122142686 50.7G 0700 userdata
Although both system and vendor partitions on your unit are ext2 (instead of ext4), your partitions look fine to me and don't need any resizing.
You could try to re-format system and vendor using either TWRP or a root shell.
Related
A while back I converted my e970 to an N4, afterwards I also did the 8gb to 16gb conversion as well. I have since converted back to "stock" however my partitions aren't quite the same as what I believe to be stock. Another stock dump.
Can anyone suggest a process to restore my partitions back stock / true?
Here is where I am at currently, partition wise:
Code:
~ # ./parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p
p
Model: MMC 016G92 (sd/mmc)
Disk /dev/block/mmcblk0: 15.8GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 8389kB 75.5MB 67.1MB fat16 modem
2 75.5MB 76.0MB 524kB sbl1
3 76.0MB 76.5MB 524kB sbl2
4 76.5MB 78.6MB 2097kB sbl3
5 78.6MB 79.2MB 524kB aboot
6 79.2MB 79.7MB 524kB rpm
7 83.9MB 109MB 25.2MB boot
8 109MB 110MB 524kB tz
9 110MB 110MB 1024B pad
10 110MB 113MB 3146kB modemst1
11 113MB 116MB 3146kB modemst2
12 117MB 118MB 799kB m9kefs1
13 118MB 119MB 799kB m9kefs2
14 119MB 120MB 799kB m9kefs3
15 126MB 134MB 8389kB ext4 drm
16 134MB 143MB 8389kB ext4 sns
17 143MB 143MB 8192B ext4 ssd
18 143MB 159MB 16.8MB misc
19 159MB 176MB 16.8MB ext4 factory
20 176MB 177MB 524kB encrypt
21 177MB 177MB 524kB eksst
22 185MB 1778MB 1594MB ext4 system
23 1778MB 2617MB 839MB ext4 cache
24 2617MB 14.9GB 12.3GB ext4 userdata
25 14.9GB 14.9GB 8389kB ext4 persist
26 14.9GB 15.2GB 268MB tombstones
27 15.2GB 15.2GB 25.2MB recovery
28 15.2GB 15.2GB 3146kB fsg
29 15.2GB 15.2GB 8192B DDR
30 15.3GB 15.3GB 33.6MB fota
31 15.3GB 15.3GB 33.6MB mpt
32 15.3GB 15.3GB 524kB tzbak
33 15.3GB 15.3GB 524kB rpmbak
34 15.3GB 15.3GB 16.8MB reserved
35 15.3GB 15.8GB 423MB grow
(parted) check 17
check 17
Warning: Partition 17 is 8192B, but the file system is 16.8MB.
Ignore/Cancel? i
i
Error: The file system is bigger than its volume!
Ignore/Cancel? i
i
No Implementation: Support for opening ext4 file systems is not implemented yet.
Hi,
i've checked out the partition list of my watch, using adb and parted.
Code:
D:\Handy\LG_G_Watch\ota>cmd.exe
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. Alle Rechte vorbehalten.
D:\Handy\LG_G_Watch\ota>adb shell cat /proc/partitions
major minor #blocks name
179 0 3817472 mmcblk0
179 1 1024 mmcblk0p1
179 2 512 mmcblk0p2
179 3 512 mmcblk0p3
179 4 512 mmcblk0p4
179 5 512 mmcblk0p5
179 6 1024 mmcblk0p6
179 7 512 mmcblk0p7
179 8 512 mmcblk0p8
179 9 512 mmcblk0p9
179 10 2048 mmcblk0p10
179 11 512 mmcblk0p11
179 12 16384 mmcblk0p12
179 13 16384 mmcblk0p13
179 14 22528 mmcblk0p14
179 15 22528 mmcblk0p15
179 16 22528 mmcblk0p16
179 17 512 mmcblk0p17
179 18 512 mmcblk0p18
179 19 262144 mmcblk0p19
179 20 262144 mmcblk0p20
179 21 3182592 mmcblk0p21
179 22 495 mmcblk0p22
179 32 4096 mmcblk0rpmb
D:\Handy\LG_G_Watch\ota>
[email protected]:/ # ls /dev/block/platform/msm_sdcc.1/by-name
ls /dev/block/platform/msm_sdcc.1/by-name
DDR
aboot
abootb
boot
cache
grow
imgdata
laf
metadata
misc
persist
recovery
rpm
rpmb
sbl1
sbl1b
sdi
ssd
system
tz
tzb
userdata
Model: MMC H4G1d♦ (sd/mmc)
Disk /dev/block/mmcblk0: 3909MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 524kB 1573kB 1049kB sbl1
2 1573kB 2097kB 524kB rpm
3 2097kB 2621kB 524kB tz
4 2621kB 3146kB 524kB sdi
5 3146kB 3670kB 524kB aboot
6 3670kB 4719kB 1049kB sbl1b
7 4719kB 5243kB 524kB rpmb
8 5243kB 5767kB 524kB tzb
9 5767kB 6291kB 524kB abootb
10 6291kB 8389kB 2097kB imgdata
11 8389kB 8913kB 524kB metadata
12 8913kB 25.7MB 16.8MB misc
13 25.7MB 42.5MB 16.8MB ext4 persist
14 42.5MB 65.5MB 23.1MB laf
15 65.5MB 88.6MB 23.1MB boot
16 88.6MB 112MB 23.1MB recovery
17 112MB 112MB 524kB ssd
18 112MB 113MB 524kB DDR
19 113MB 381MB 268MB ext4 system
20 381MB 650MB 268MB ext4 cache
21 650MB 3909MB 3259MB ext4 userdata
22 3909MB 3909MB 507kB grow
(parted)
regards
starbase64
How exactly do I interpret this now? Do the numbers on the first block correspond to the numbers on the third one? So, as example, boot is mmcblk0p15?
Before reading this, read the OP of this thread.
It's for e980, but so far went well for my e970. I got to the part where I'm flashing the SD card, but a lot of files listed in the gdisk output aren't in the output folder from the extractor. I used LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip , if that helps. Anywho, I have no idea where to put half of these files and they're fairly big, so I'm guessing they're important. Attached is a screen of the extracted folder and below is my gdisk output. If anybody knows more about the layout of the e970 than I do or has a working stock one that they can look into, that would be massively helpful. I've tried making the SD with just the files listed in the gdisk output and got no love. I'm gonna hope it was user error and try it again. Hope this helps others like me who got the phone cheap and don't want to pay $60 and up and hope the JTAG guy knows what he's doing, or shell out $200 for a kit. If I get just the gdisk files to work, I'll update this.
GDISK output
[email protected]:~$ sudo gdisk -l /dev/mmcblk0
GPT fdisk (gdisk) version 0.8.8
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/mmcblk0: 31586304 sectors, 15.1 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Partition table holds up to 36 entries
First usable sector is 11, last usable sector is 31586293
Partitions will be aligned on 2-sector boundaries
Total free space is 872866 sectors (426.2 MiB)
Number Start (sector) End (sector) Size Code Name
1 16384 147455 64.0 MiB 0700 modem
2 147456 148479 512.0 KiB FFFF sbl1
3 148480 149503 512.0 KiB FFFF sbl2
4 149504 153599 2.0 MiB FFFF sbl3
5 153600 154623 512.0 KiB FFFF aboot
6 154624 155647 512.0 KiB FFFF rpm
7 163840 212991 24.0 MiB FFFF boot
8 212992 214015 512.0 KiB FFFF tz
9 214016 214017 1024 bytes FFFF pad
10 214018 220161 3.0 MiB FFFF modemst1
11 220162 226305 3.0 MiB FFFF modemst2
12 229376 230935 780.0 KiB FFFF m9kefs1
13 230936 232495 780.0 KiB FFFF m9kefs2
14 232496 234055 780.0 KiB FFFF m9kefs3
15 245760 262143 8.0 MiB 8300 drm
16 262144 278527 8.0 MiB 8300 sns
17 278528 278543 8.0 KiB FFFF ssd
18 278544 311311 16.0 MiB FFFF misc
19 311312 344079 16.0 MiB 8300 factory
20 344080 345103 512.0 KiB FFFF encrypt
21 345104 346127 512.0 KiB FFFF eksst
22 360448 3473407 1.5 GiB 8300 system
23 3473408 5111807 800.0 MiB 8300 cache
24 5111808 29179903 11.5 GiB 8300 userdata
25 29179904 29196287 8.0 MiB 8300 persist
26 29196288 29720575 256.0 MiB 8300 tombstones
27 29720576 29769727 24.0 MiB FFFF recovery
28 29769728 29775871 3.0 MiB FFFF fsg
29 29775872 29775887 8.0 KiB FFFF DDR
30 29786112 29851647 32.0 MiB FFFF fota
31 29851648 29917183 32.0 MiB 8300 mpt
32 29917184 29918207 512.0 KiB FFFF tzbak
33 29918208 29919231 512.0 KiB FFFF rpmbak
34 29919232 29951999 16.0 MiB FFFF reserved
35 29952000 30777310 403.0 MiB 8300 grow
Hello, I'm having a problem with a B5 E5 4G (MSM8916 chipset), after a hard reset through fastboot it no longer boot, doesn't turn on the led, doesn't charge the battery ... when I connect it to PC it is recognized as "Qualcomm HS- USB QDLoader 9008", after I installed the appropriate drivers. I have been trying to revive it with QFIL without luck, it is stuck in 9008 mode and I can't put it into 9006 mode. In addition, the firmware provided by the manufacturer doesn't have the necessary files (firehose, rawprogram0.xml, patch0.xml, partition.xml, hex files...), the only XML file it brings is one called "content.xml". I had to generate the files manually, based on a complete image I made of the memory with DD (mmcblk0) when I could still enter by ADB, the partition table looks like this:
Code:
GPT fdisk (gdisk) version 1.0.1
Warning! Disk size is smaller than the main header indicates! Loading
secondary header from the last sector of the disk! You should use 'v' to
verify disk integrity, and perhaps options on the experts' menu to repair
the disk.
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: damaged
****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************
Disk memint.img: 8388607 sectors, 4.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Partition table holds up to 32 entries
First usable sector is 34, last usable sector is 30785502
Partitions will be aligned on 2-sector boundaries
Total free space is 86924 sectors (42.4 MiB)
Number Start (sector) End (sector) Size Code Name
1 34 1057 512.0 KiB FFFF sbl1
2 1058 2081 512.0 KiB 0700 sbl1bak
3 2082 4129 1024.0 KiB FFFF aboot
4 4130 6177 1024.0 KiB 0700 abootbak
5 6178 7201 512.0 KiB FFFF rpm
6 7202 8225 512.0 KiB 0700 rpmbak
7 8226 9249 512.0 KiB FFFF tz
8 9250 10273 512.0 KiB 0700 tzbak
9 10274 11297 512.0 KiB FFFF hyp
10 11298 12321 512.0 KiB 0700 hypbak
11 12322 14369 1024.0 KiB 0700 pad
12 14370 17441 1.5 MiB FFFF modemst1
13 17442 20513 1.5 MiB FFFF modemst2
14 20514 22561 1024.0 KiB FFFF misc
15 22562 22563 1024 bytes FFFF fsc
16 22564 22579 8.0 KiB FFFF ssd
17 22580 43059 10.0 MiB FFFF splash
18 43060 44083 512.0 KiB FFFF keystore
19 44084 44147 32.0 KiB FFFF config
20 44148 175219 64.0 MiB FFFF oem
21 262144 262207 32.0 KiB FFFF DDR
22 262208 393279 64.0 MiB 0700 modem
23 393280 396351 1.5 MiB FFFF fsg
24 396352 396383 16.0 KiB FFFF sec
25 396384 461919 32.0 MiB FFFF boot
26 461920 3607647 1.5 GiB 0700 system
27 3607648 3673183 32.0 MiB 0700 persist
28 3673184 5770335 1024.0 MiB 0700 cache
29 5770336 5835871 32.0 MiB FFFF recovery
30 5835872 30785502 11.9 GiB 0700 userdata
I also backed up each individual partition (mmcblk0pX). But what I said, for some reason does not come out of 9008 mode... Could you help me? Maybe I have to correct the rawprogram0.xml? I'll attach it in the post.
I not too sure about this but I think you have to open up the phone and short out the nand pins while connecting to pc
Devmountsu77 said:
I not too sure about this but I think you have to open up the phone and short out the nand pins while connecting to pc
Click to expand...
Click to collapse
Even when it's already detected as "Qualcomm DLoader 9008"?
Hello experts,
Need help,
I have one android phone with a eMMc chip, It is stuck in bootlogo.
I can enter into bootloader, so I did
Then I booted in twrp tru
fastboot boot twrp.img
Now I checked the disk partition table thru fdisk /dev/block/mmcblk0
The print command gives me output
Command (m for help): [6np
Disk /dev/block/mmcblk0: 30785536 sectors, 2744M
Logical sector size: 512
Disk identifier (GUID): 98101b32-bbe2-4bf2-a06e-2bb33d000c20
Partition table holds up to 28 entries
First usable sector is 34, last usable sector is 30785502
Number Start (sector) End (sector) Size Code Name
1 131072 262143 64.0M 0700 modem
2 262144 262145 1024 0700 fsc
3 262146 262161 8192 0700 ssd
4 262162 263185 512K 0700 sbl1
5 263186 264209 512K 0700 sbl1bak
6 264210 265233 512K 0700 rpm
7 265234 266257 512K 0700 rpmbak
8 266258 267281 512K 0700 tz
9 267282 268305 512K 0700 tzbak
10 268306 269329 512K 0700 hyp
11 269330 270353 512K 0700 hypbak
12 270354 273425 1536K 0700 modemst1
13 273426 276497 1536K 0700 modemst2
14 276498 296977 10.0M 0700 splash
15 393216 393279 32768 0700 DDR
16 393280 396351 1536K 0700 fsg
17 396352 396383 16384 0700 sec
18 396384 398431 1024K 0700 aboot
19 398432 400479 1024K 0700 abootbak
20 400480 466015 32.0M 0700 boot
21 466016 531551 32.0M 0700 recovery
22 531552 4725855 2048M 0700 system
23 4849664 4980735 64.0M 0700 cache
24 4980736 5046271 32.0M 0700 persist
25 5046272 5048319 1024K 0700 misc
26 5048320 5049343 512K 0700 keystore
27 5049344 5050367 512K 0700 config
28 5050368 30785502 12.2G 0700 userdata
Command (m for help): [6n[Jm
However,
I have checked the same in a same model phone in all working condition, there it is
Number Start (sector) End (sector) Size Code Name
1 131072 262143 64.0 MiB 0700 modem
2 262144 262145 1024 bytes FFFF fsc
3 262146 262161 8.0 KiB FFFF ssd
4 262162 263185 512.0 KiB FFFF sbl1
5 263186 264209 512.0 KiB 0700 sbl1bak
6 264210 265233 512.0 KiB FFFF rpm
7 265234 266257 512.0 KiB 0700 rpmbak
8 266258 267281 512.0 KiB FFFF tz
9 267282 268305 512.0 KiB 0700 tzbak
10 268306 269329 512.0 KiB FFFF hyp
11 269330 270353 512.0 KiB 0700 hypbak
12 270354 273425 1.5 MiB FFFF modemst1
13 273426 276497 1.5 MiB FFFF modemst2
14 276498 296977 10.0 MiB FFFF splash
15 393216 393279 32.0 KiB FFFF DDR
16 393280 396351 1.5 MiB FFFF fsg
17 396352 396383 16.0 KiB FFFF sec
18 396384 398431 1024.0 KiB FFFF aboot
19 398432 400479 1024.0 KiB 0700 abootbak
20 400480 466015 32.0 MiB FFFF boot
21 466016 531551 32.0 MiB FFFF recovery
22 531552 4725855 2.0 GiB FFFF system
23 4849664 4980735 64.0 MiB FFFF cache
24 4980736 5046271 32.0 MiB FFFF persist
25 5046272 5048319 1024.0 KiB FFFF misc
26 5048320 5049343 512.0 KiB FFFF keystore
27 5049344 5050367 512.0 KiB FFFF config
28 5050368 30785502 12.3 GiB FFFF userdata
The only difference is,
Partition code, mine is 0700 in all partiions,
but in the working phone it is, 0700 or FFFF.
Rest all are same.
I cant mount /system, /data etc.
Deleting/reformatting partition in parted not working.
Can anybody explain the meaning of partition code ??
I searched in googled but could not find.
Which code means what ?? 0700 & FFFF.
What is the difference when code is changed ?
How to repartition ??