LineageOS is an AOSP based Pie ROM, with contributions from members of the Android community.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Bugs:
Camera/Camcorder
Selinux is permissive
Audio volume steps don't work
You tell me
What works:
Boots
Audio (Recording/Playback)
Video Playback
GPS
Wifi
Bluetooth
FM Radio
In-Call Audio
RIL (NOTE: You must go into Settings, and follow this: (Network & Internet) -> (Mobile Network) -> (Advanced) -> (Carrier Settings). This will fix things for one reason or another.)
Installation Instructions:
First off, make sure you are running the latest TWRP. It will be continually updated with support for this ROM's features.
Secondly, ensure at the very least, you are on a recent update. If you are not, then flash the stock ROM via Odin, and perform a system update.
Thirdly, this ROM is ONLY for the SM-J727P, also known as j7popltespr, or the J7 2017 Snapdragon.
Perform a factory reset in TWRP
Select advanced settings under 'Wipe', and wipe 'System'
Flash the LineageOS 16.0 ROM
Install any other modifications (OpenGApps (Platform ARM64, Ver. 9.0.0), and/or Magisk)
Wipe Dalvik & Cache
Reboot and wait
Downloads:
LineageOS 16.0:
https://www.androidfilehost.com/?fid=1899786940962576314
TWRP:
https://forum.xda-developers.com/galaxy-j7/development/recovery-twrp-3-1-1-x-galaxy-j727p-t3692663
Be sure to hit that thanks button to show that you support this development and/or donate to me via my PayPal, [email protected]
XDA:DevDB Information
LineageOS 16.0 (j7popltespr), ROM for the Samsung Galaxy J7
Contributors
minz1
ROM OS Version: 9.x Pie
ROM Firmware Required: O Firmware
Based On: LineageOS
Version Information
Status: Beta
Created 2019-09-05
Last Updated 2019-09-05
NOTE: I will likely not be releasing any more Lineage 16.0 builds for the J7. I wanted to get something stable out, but unfortunately some of the bugs require far more effort to resolve. This build is probably the best working one to date, so that's what's released. I hope you enjoy!
minz1 said:
NOTE: I will likely not be releasing any more Lineage 16.0 builds for the J7. I wanted to get something stable out, but unfortunately some of the bugs require far more effort to resolve. This build is probably the best working one to date, so that's what's released. I hope you enjoy!
Click to expand...
Click to collapse
Hi , nice work there ...
just wondered if this can be ported to c7 pro coz both have similar soc ( Qualcomm MSM8953-Pro Snapdragon 626) and have common vendor ... :laugh:
Regards
jesvi said:
Hi , nice work there ...
just wondered if this can be ported to c7 pro coz both have similar soc ( Qualcomm MSM8953-Pro Snapdragon 626) and have common vendor ... :laugh:
Regards
Click to expand...
Click to collapse
We do not have a maintainer for the C7 Pro currently, but it is possible.
Hi,i'm sasi2006166 and i want to join your "team", yes i know how to build roms in fact u can see many of my threads in j7 2016 exynos7870 section, thanks
I got it to work but not internet . I went back to 8.1. However even after I formatted and swiped everything my phone only says have 8 gigs of storage with only 2.5 available . This only happened after flashing this rom a few times . Any idea how to fix this so phone recognizes 16 gig ? Oh and btw your rom is cool and when I have more experience may put it back on . Thank you for all your great work on J7 , I love this phone !
@Tigerevo Hello, can you give us detail about how you restored to the stock ROM 8.1? Did you use TWRP backup or do you use ODIN to flash your phone?
---------- Post added at 03:58 AM ---------- Previous post was at 03:50 AM ----------
@minz1 I think I have I faint idea of what is causing the camera to misbehave, as I noted in another post about the quirks of the Oreo ROM in the J7 Perx, if you uninstall the stock Messages app or the Contacts app, it automatically ruin your camera, both front and rear making it unable to work while summoning any app that require them, it doesn't make the app crash or anything, it just show a black viewfinder unable to make it take a shot or record video, not even the flash. As for the LTE or by default 3G Internet, it's unfortunate that there are no open source for the Snapdragon 625 modem or binary blobs going around to interface with it. But all in all very smooth and nice running ROM for an initial Android 9.0 port to the J7 Perx
I formatted and swiped system . I then used odin.
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
Oh and somehow someway my phone recognized the full 16 gigs today
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Oh and somehow someway my phone recognized the full 16 gigs today
ROM Has Random Shutdowns Changed To New Battery So It's Not The Battery
YouTube Doesn't Load Or Snapchat
Everything Else Works Fine Its Just Those That I Came Across And The Ones You Mentioned
Bluetooth Connects But Audio Still Plays Through The Phone
YouTube Doesnt Work Or Snapchat,Instagram Can't Post Anything
Music Cause Phone To Reboot As Well After A Couple Of Skips The Phone Shutsdown And Reboots To Recovery
Scrolling Down Instagram And Sharing Posts Causes A Reboot To Recovery
Flashed to j727r4 and working with same bugs as mentioned. Had to flash the j7popltespr lineage 14.1 prior to flashing lineage build 16 in order for system to boot. Not sure why. Also magisk 20.0 prevents system from booting as well. Magisk 18.1 on the other hand is working. Crossing fingers for a working lineage 17.0 ?
ct760ster said:
@Tigerevo Hello, can you give us detail about how you restored to the stock ROM 8.1? Did you use TWRP backup or do you use ODIN to flash your phone?
Try using this twrp backup . https://forum.xda-developers.com/galaxy-j7-2017/how-to/twrp-backup-j7-perx-sm-j727p-rooted-t3993843
---------- Post added at 08:52 PM ---------- Previous post was at 08:50 PM ----------
Nulati said:
Flashed to j727r4 and working with same bugs as mentioned. Had to flash the j7popltespr lineage 14.1 prior to flashing lineage build 16 in order for system to boot. Not sure why. Also magisk 20.0 prevents system from booting as well. Magisk 18.1 on the other hand is working. Crossing fingers for a working lineage 17.0
Click to expand...
Click to collapse
Try Magisk 19.2 !
Click to expand...
Click to collapse
help i cant get acess to carrer setting
Imei are there everthing is fine .just cant get service
Minz any idea ?
SaraO7 said:
help i cant get acess to carrer setting
Imei are there everthing is fine .just cant get service
Minz any idea ?
Click to expand...
Click to collapse
Same problem here, grayed out options, these posts are within a few days of each other but surely this isn't something new... then again, if it is (something new), should it be taken to mean that there are indeed 'new' issues/features? Boy, now we're cooking with gasoline!
This is a solid rom, but my 'good phone' decided it needed to be in the bath (I'd already told it to be BY the bath, awaiting my requests) so now I'm all like: mllmlmm, you know? And don't even get me STARTED on spending money. Psht!
krbzzr said:
Same problem here, grayed out options, these posts are within a few days of each other but surely this isn't something new... then again, if it is (something new), should it be taken to mean that there are indeed 'new' issues/features? Boy, now we're cooking with gasoline!
This is a solid rom, but my 'good phone' decided it needed to be in the bath (I'd already told it to be BY the bath, awaiting my requests) so now I'm all like: mllmlmm, you know? And don't even get me STARTED on spending money. Psht!
Click to expand...
Click to collapse
Lol that funny and sad at the same time
It is easy fix why just @minz1 fix it and send us zip file . I dont think this will be hard for him .
I want to learn how to make my own rom to fix my own problems and don't wait like fool to fix it :fingers-crossed:
SaraO7 said:
Lol that funny and sad at the same time
It is easy fix why just @minz1 fix it and send us zip file . I dont think this will be hard for him .
I want to learn how to make my own rom to fix my own problems and don't wait like fool to fix it :fingers-crossed:
Click to expand...
Click to collapse
As the developer stated in her post, this ROM will not get further updates or end up as a final release because the burden to fix those bugs are unsurmontable for a single person. Let's behave as civilized people and not start talking nonsense to just pan handle some free meal.
ct760ster said:
As the developer stated in her post, this ROM will not get further updates or end up as a final release because the burden to fix those bugs are unsurmontable for a single person. Let's behave as civilized people and not start talking nonsense to just pan handle some free meal.
Click to expand...
Click to collapse
Yeah it is free meal .but it is professional website .and should have good staff ..not every free meal should be bad ..I don't say this is bad post or bad ROM ..I said why not just response to our problems we don't want update ..just fix this only bug and it will be very good professional free meal
any
can you fix any bugs it a really good rom please fix man :crying::crying::crying::crying::crying::crying:
Is it works on sm-j727s ?
Nulati said:
Flashed to j727r4 and working with same bugs as mentioned. Had to flash the j7popltespr lineage 14.1 prior to flashing lineage build 16 in order for system to boot. Not sure why. Also magisk 20.0 prevents system from booting as well. Magisk 18.1 on the other hand is working. Crossing fingers for a working lineage 17.0 ?
Click to expand...
Click to collapse
Is sm-j727r4 exynos 7870 model? I want to flash this lineageos file on my sm-j727s.
Related
hey guys,
just wanted to tell you that at the miui forums there is already a cyanogenmod 12.1 ported for the redmi 3. its a zip to load via TWRP and only for unlocked bootloader.
its the 4th version and it's pretty much stable. been using the rom as a daily driver for 5 days now and everything worked so far. i havent tested every function but camera, gps, wifi, 4g data, bluetooth, etc works super fine. only thing is that battery life is superior on original miui rom. anyone interested in getting rid of miui check out the link.
http://en.miui.com/thread-249717-1-1.html
p.s. wipe phone first before installing CM.
p.p.s. don't forget 64bit gapps if you need it!
Yostarone said:
hey guys,
just wanted to tell you that at the miui forums there is already a cyanogenmod 12.1 ported for the redmi 3. its a zip to load via TWRP and only for unlocked bootloader.
its the 4th version and it's pretty much stable. been using the rom as a daily driver for 5 days now and everything worked so far. i havent tested every function but camera, gps, wifi, 4g data, bluetooth, etc works super fine. only thing is that battery life is superior on original miui rom. anyone interested in getting rid of miui check out the link.
http://en.miui.com/thread-249717-1-1.html
p.s. wipe phone first before installing CM.
p.p.s. don't forget 64bit gapps if you need it!
Click to expand...
Click to collapse
Great news!
How bad is the batterylife and is the pictures taken with the camera as good as with miui?
I dirty flashed this 4th version over the 3rd one. No need to flash gapps if you dirty flash from previous version.
There are 5 chinese apps, I froze them with titanium.
No issues so far. Been using the 3rd version about a week now.
So how is the battery life?
battery life with the 4th version is pretty much on par with miui now.
this cm comes with root (toggle in developer options) so i just uninstalled the 6 Chinese apps with system app remover.
What about camera quality, focus speed and HDR? Are those on par with MIUI?
Chinese user here! I flashed this ported CM 12.1 this morning. I also found the annoying existence of Baidu and 360 apps preinstalled in this rom. Because im not sure how xposed works with this ported CM 12.1, so i flashed back to MIUI 6.3.25 for there's a relatively stable xposed support
Using it for over 2 days now and I am impressed.
Its very stable and fully operational.
Apart from chineese apps pre-installed, theres not even one fault with it.
Battery and camera just fine, as on original MIUI.
Beauty and simplicity of CM was just what I needed for my Redmi3.
Cheers.
Does someone know if this will work on redmi 3 PRO?
moly82 said:
Does someone know if this will work on redmi 3 PRO?
Click to expand...
Click to collapse
Most likely, it wont. Even though phones have exactly same specs, you might find that there could be some differences in things like sensors, camera etc.
So yeah, it might boot, but you most likely will be annoyed by multiple things not working (including fingerprint sensor)
there are a few versions on the miui chinese forums (which I can read and translate), anyway what I've read is that 1 of the CM12.1 ROMs come with trojan horse (but scanned via a chinese security app 360 antivirus) - http://www.miui.com/thread-3980415-1-1.html (the user said she was on CM12.1 4th version)
Please do try a scan with your antivirus (on Android, I use Sophos) of choice just to be safe. I would do it but I'm still waiting for my bootloader to be unlocked.
What I've heard on the forum linked above is that development from cofface is trustworthy, hence I searched and indeed there is a CM12.1 ROM that was just uploaded. (http://www.miui.com/thread-3986022-1-1.html) It does not appear to come with any Chinese apps like the 4th version listed above. Maybe it's worth a try? (I'm not sure)
All CM12.1 versions:
http://www.miui.com/thread-3985299-1-1.html ROM dated 3/30, modded by Liberation, original by Flour_Mo (comes with Chinese apps)
http://www.miui.com/thread-3986022-6-1.html by Cofface (doesn't seem to have any bloatware)
http://www.miui.com/thread-3968326-1-1.html 4th version by Flour_Mo
CM 13 is also in the works but will take some time to become stable..
**apparently there is a buggy LED notification in all CM 12.1 builds
berrytarts said:
there are a few versions on the miui chinese forums (which I can read and translate), anyway what I've read is that 1 of the CM12.1 ROMs come with trojan horse (but scanned via a chinese security app 360 antivirus) - http://www.miui.com/thread-3980415-1-1.html (the user said she was on CM12.1 4th version)
Please do try a scan with your antivirus (on Android, I use Sophos) of choice just to be safe. I would do it but I'm still waiting for my bootloader to be unlocked.
What I've heard on the forum linked above is that development from cofface is trustworthy, hence I searched and indeed there is a CM12.1 ROM that was just uploaded. (http://www.miui.com/thread-3986022-1-1.html) It does not appear to come with any Chinese apps like the 4th version listed above. Maybe it's worth a try? (I'm not sure)
All CM12.1 versions:
http://www.miui.com/thread-3985299-1-1.html ROM dated 3/30, modded by Liberation, original by Flour_Mo (comes with Chinese apps)
http://www.miui.com/thread-3986022-6-1.html by Cofface (doesn't seem to have any bloatware)
http://www.miui.com/thread-3968326-1-1.html 4th version by Flour_Mo
CM 13 is also in the works but will take some time to become stable..
**apparently there is a buggy LED notification in all CM 12.1 builds
Click to expand...
Click to collapse
Hey, thanks for keeping us posted. I would like to install this cofface rom, but I cant get through chinese websites. Could you please give me a link, or upload it for me?
Much obliged.
can someone please share a link but not to chiniese site where to download i have to sign in with my phone number ?
How does performance looks compared to MIUI ? Do phone/contact/camera/messege apps launch faster or slower compared to MIUI ? How much free RAM is available after reboot ?
berrytarts said:
there are a few versions on the miui chinese forums (which I can read and translate), anyway what I've read is that 1 of the CM12.1 ROMs come with trojan horse (but scanned via a chinese security app 360 antivirus) - http://www.miui.com/thread-3980415-1-1.html (the user said she was on CM12.1 4th version)
Please do try a scan with your antivirus (on Android, I use Sophos) of choice just to be safe. I would do it but I'm still waiting for my bootloader to be unlocked.
What I've heard on the forum linked above is that development from cofface is trustworthy, hence I searched and indeed there is a CM12.1 ROM that was just uploaded. (http://www.miui.com/thread-3986022-1-1.html) It does not appear to come with any Chinese apps like the 4th version listed above. Maybe it's worth a try? (I'm not sure)
All CM12.1 versions:
http://www.miui.com/thread-3985299-1-1.html ROM dated 3/30, modded by Liberation, original by Flour_Mo (comes with Chinese apps)
http://www.miui.com/thread-3986022-6-1.html by Cofface (doesn't seem to have any bloatware)
http://www.miui.com/thread-3968326-1-1.html 4th version by Flour_Mo
CM 13 is also in the works but will take some time to become stable..
**apparently there is a buggy LED notification in all CM 12.1 builds
Click to expand...
Click to collapse
Thank you very much for clearing this up! I knew that there was something dodgy going on with those Roms!!! All the crap they are saying about "how we should use those apps and support devs" did sound like pile of sh*t to me. Someone from here really should post some screenshots of AV scans there and expose those bastards. It's really annoying that someone is even trying to do that...
---------- Post added at 09:31 AM ---------- Previous post was at 09:29 AM ----------
adddaamo said:
How does performance looks compared to MIUI ? Do phone/contact/camera/messege apps launch faster or slower compared to MIUI ? How much free RAM is available after reboot ?
Click to expand...
Click to collapse
When I was trying cm builds, the performance was actually really good. But somehow I started to like miui about free RAM, there was around 1.2 gigs available, I think. That decreases to 1 gig after you install gapps.
---------- Post added at 09:33 AM ---------- Previous post was at 09:31 AM ----------
d00lar said:
can someone please share a link but not to chiniese site where to download i have to sign in with my phone number ?
Click to expand...
Click to collapse
Go to miui forums and people usually re-post Roms to some other *drive website like gdrive again, I do not recommend using any of those scammy Roms until it is clarified that Roms are actually clean and legit
usblaidas said:
Thank you very much for clearing this up! I knew that there was something dodgy going on with those Roms!!! All the crap they are saying about "how we should use those apps and support devs" did sound like pile of sh*t to me. Someone from here really should post some screenshots of AV scans there and expose those bastards. It's really annoying that someone is even trying to do that...
---------- Post added at 09:31 AM ---------- Previous post was at 09:29 AM ----------
When I was trying cm builds, the performance was actually really good. But somehow I started to like miui about free RAM, there was around 1.2 gigs available, I think. That decreases to 1 gig after you install gapps.
---------- Post added at 09:33 AM ---------- Previous post was at 09:31 AM ----------
Go to miui forums and people usually re-post Roms to some other *drive website like gdrive again, I do not recommend using any of those scammy Roms until it is clarified that Roms are actually clean and legit
Click to expand...
Click to collapse
i think some of the developers there are legit (like the rooted ROM on this forum by greatslon and TWRP recovery by cofface http://www.miui.com/thread-3917207-1-1.html), not to worry, I believe it might even be false positives, since the AV scan is from a Chinese AV app (360 security) so... there is a chance its reporting false positives. Just have to see the response from those who have already flashed the ROMs. As for links to download, alright, will try to re-upload those ROMs or post the link to download here. Its actually pretty safe to register your phone number because its linked to the MIUI servers (the Chinese like to use phone numbers as a way to access many features, such as Airport WIFI etc)
To those wondering how to see the download links - its like the english version of the MIUI forums. you will have to set up a forum account, then comment once to gain "experience" and then the download link is revealed.
Hello guys, unfortunately I can't move my apps to the SD card. I have a UHS class 10 64Gb SD Card.
It says that I don't have enough space, while I have a lot, like 57Gb free.
Is anyone having the same problem, if not, how can I solve it anyway?
Inviato dal mio Redmi 3 utilizzando Tapatalk
berrytarts said:
i think some of the developers there are legit (like the rooted ROM on this forum by greatslon and TWRP recovery by cofface http://www.miui.com/thread-3917207-1-1.html), not to worry, I believe it might even be false positives, since the AV scan is from a Chinese AV app (360 security) so... there is a chance its reporting false positives. Just have to see the response from those who have already flashed the ROMs. As for links to download, alright, will try to re-upload those ROMs or post the link to download here. Its actually pretty safe to register your phone number because its linked to the MIUI servers (the Chinese like to use phone numbers as a way to access many features, such as Airport WIFI etc)
To those wondering how to see the download links - its like the english version of the MIUI forums. you will have to set up a forum account, then comment once to gain "experience" and then the download link is revealed.
Click to expand...
Click to collapse
Sorry, I probably should have explained more what I meant.
cofface is a legit dev, who seems to be doing a great job for out little community.
But other devs, who do stuff like pre-installing some weird apps... I honestly cannot think of any excuses of why they are doing that, apart from spying/collecting your address books/etc.
So yeah, the only rom to try is cofface's at this moment. But then again, I can't seem to find any download link in that Chinese thread.
Anywho, I'm looking forward seeing cm13 on our phones, which is pretty exciting. And hopefully Android N in a near future ^^
usblaidas said:
Sorry, I probably should have explained more what I meant.
cofface is a legit dev, who seems to be doing a great job for out little community.
But other devs, who do stuff like pre-installing some weird apps... I honestly cannot think of any excuses of why they are doing that, apart from spying/collecting your address books/etc.
So yeah, the only rom to try is cofface's at this moment. But then again, I can't seem to find any download link in that Chinese thread.
Anywho, I'm looking forward seeing cm13 on our phones, which is pretty exciting. And hopefully Android N in a near future ^^
Click to expand...
Click to collapse
I've posted the ROM in the xda forum and uploaded the ROM on google drive and MEGA. here's the link: http://forum.xda-developers.com/redmi-3/development/rom-cm12-1-redmi-3-t3348916
the forum functions like the english miui forums where you have to create an account (your english miui account will do fine) and comment before you can see the download link! and the pre-installed apps are the chinese alternatives to the google apps that they don't have access to. If I'm not wrong.
objr said:
Hello guys, unfortunately I can't move my apps to the SD card. I have a UHS class 10 64Gb SD Card.
It says that I don't have enough space, while I have a lot, like 57Gb free.
Is anyone having the same problem, if not, how can I solve it anyway?
Inviato dal mio Redmi 3 utilizzando Tapatalk
Click to expand...
Click to collapse
You may need to edit your permissions xml file to include rw on media line to have it working right. http://zidroid.com/how-to-fix-extsdcard-mount-issue-on-kitkat-and-lollipop/
THIS WILL ONLY WORK ON KINZIE AKA MOTO X FORCE!
Warning: Flashing this may void your device’s warranty, lead
to data loss, hair loss, financial loss, privacy loss, security breaches, or other damage, and therefore
must be done entirely at your own risk. No one affiliated with this project is responsible for your
actions but yourself.
Click to expand...
Click to collapse
Not working:
Hotspot is working but buggy (spam turn on a bit and it should work)
Camera recording
maybe some minor bugs
To get store working set password in developer tools and then run in terminal "devel-su zypper ref" then type password and ignore first repo error.
INSTALL:
- download cm13 base
- download rootfs
- [OPTIONAL] flash Jolla bootlogo
- wipe everything (data/dalvik/system/cache you know)
- Install cm13
- Install rootfs
- Boot
- Reboot after first boot to have audio control fixed
- Have fun
Changelog:
BUILD 3:
Initial public release
STABLE 1:
Fixed usb networking
Fixed led
Fixed audio volume control
STABLE 2:
Update to 2.2.0.29
STABLE 3:
Update to 2.2.1.18
STABLE 4:
Update to 3.0.0.8
Fixed cpu hotplug settings (i thought i added it already sry) so it will now work A LOT BETTER
F.A.Q.
OTA
Run in terminal:
Code:
devel-su ssu re 3.0.0.8
devel-su ssu ar adaptation-community http://repo.merproject.org/obs/nemo:/testing:/hw:/motorola:/kinzie/sailfishos_3.0.0.8/
devel-su ssu ar adaptation-community-common http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfishos_3.0.0.8/
devel-su zypper clean -a
devel-su zypper ref -f
version --dup
reboot phone
HOW TO REPORT BUG
After bug occurs type in the terminal following commands:
/usr/libexec/droid-hybris/system/bin/logcat
devel-su dmesg
devel-su journalctl
and give me logs from there (do not paste it in the post! Use pastebin.com)
devel-su will ask you for password, you can set it in developer tools.
Many thanks to mal and other people on #sailfishos-porters IRC channel that helped me.
XDA:DevDB Information
SailfishOS, ROM for the Droid Turbo 2
Contributors
Mister_Magister
Source Code: https://github.com/VerdandiTeam
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: SailfishOS
Version Information
Status: Stable
Current Stable Version: 4
Created 2017-08-30
Last Updated 2018-11-10
Reserved
I'd like to see how this works out.
Added Jolla bootlogo
Guys i made idle battery life a lot better. I'll upload build today/tomorrow
UPLOADED
I did not criticize the expensive system, I just wanted to show some screenshots that I took when I installed the OS.
but the forum does not allow new users to post external links with less than 10 postangens.
luccas_bandeira said:
I did not criticize the expensive system, I just wanted to show some screenshots that I took when I installed the OS.
but the forum does not allow new users to post external links with less than 10 postangens.
Click to expand...
Click to collapse
You probably still don't see it. "Selfish" is an insult. Sailfish is an Operating system made by Jolla. Know your typo :highfive:
Mister_Magister said:
You probably still don't see it. "Selfish" is an insult. Sailfish is an Operating system made by Jolla. Know your typo :highfive:
Click to expand...
Click to collapse
wtf.. ._.
Guys i have fixed notification led but you gotta wait for it a bit
Nice
Awesome..
Guys i got bt turned on (nothing else but turning on/off works but it turns on!) And also doing some weird stuff with kernel will try also fix camera recording
AD working?
Is Dalvik working on this port? Someone pointed to this on TMO : here
lfc222222 said:
Is Dalvik working on this port? Someone pointed to this on TMO : here
Click to expand...
Click to collapse
Well Mister1Magister looks like me so dunno think for yourself
next question: do you intend to have Dalvik work on any future device port you are trying to fund?
If so, how do you pick devices? (Ok, that’s 2...)
lfc222222 said:
next question: do you intend to have Dalvik work on any future device port you are trying to fund?
If so, how do you pick devices? (Ok, that’s 2...)
Click to expand...
Click to collapse
Aliendalvik not dalvik that's first. Aliendalvik is avaliable only for official devices, it just happened to work on kinzie too (just needed to change some file). I was planning to port anbox for this and any other device but it's currently almost not working and it's hard :/
How do i choose devices? Well i love motorolas because they're very very easy to port so i'm sure they will work. I'm throwing away brands that i hate/i know sfos would not work on them. My 2 crowdfunding campaigns covers moto x style and huawei p8 lite it was almost choosed by people (i picked them from sailfishos port request page). I'll by for myself from my money moto x 1 and x2 cuz i love them X force was choosed because it was very interesting device and also it's probably one of the most powerful sfos powered device rn so i wanted to show people that not only ultra old devices have sfos but newest ones too (well x force is 2 years old but still have great specs). so yeah once anbox get usable i'll try to port on x force and every device that i have/will have
Well guys my work is freezed until my X Force get repaired
Appreciate your work! Sent a small $5 donation, thanks and hope your device will be repaired soon!
alex3594 said:
Appreciate your work! Sent a small $5 donation, thanks and hope your device will be repaired soon!
Click to expand...
Click to collapse
Yeah thank you very much! It will be used to bring another device!
A question: can this sailfish version on the device be updated OTA to the latest version?
Or will it be stuck at version 2.1.1.26 built5? Many thanks and best wished
Woermel said:
A question: can this sailfish version on the device be updated OTA to the latest version?
Or will it be stuck at version 2.1.1.26 built5? Many thanks and best wished
Click to expand...
Click to collapse
There will be non ota update to 2.1.3 once my phone get fixed. cant do ota untill it gets fixed
The device ships with Android 8.1 (= Treble enabled) and Xiaomi usually lets users unlock the bootloader. Does that mean we can simply flash a generic system image (GSI) and enjoy a fully working tablet from day 1?
EDIT: Summary of findings as of November 25, 2018
After unlocking the device and flashing TWRP a GSI can be installed. However, Universal DM-Verity (and ForceEncrypt) Disable is needed to be able to boot (might have to flash twice and/or reformat data to lose encryption). See Installation guide by GBouerat.
The device works fine and can be used as a daily driver. However, there are a few things not working, buggy or needed to be set up. Specifically you need to adjust the DPI settings in /vendor/build.prop:
Code:
ro.sf.lcd_density=320
ro.build.characteristics=tablet
Other tweaks:
enable lockscreen rotation (if not already working) => in build.prop set:
Code:
lockscreen.rot_override=true
display correct device name => in /system/build.prop set:
Code:
ro.product.manufacturer=Xiaomi
ro.product.model=MI PAD 4
ro.product.brand=Xiaomi
ro.product.name=clover
ro.product.device=clover
smoother rounded edges => use overlay app (post #92)
pass SafetyNet
Not working:
clock resets at boot (TWRP not affected though) until you enable WiFi => use ClockSync if time server is not reachable or set another server (see post #221)
WiFi is not automatically turned on after boot => works for some on AOSP phh v23/v25; works for me only for a short moment when setting up as new device (no backup from cloud!) or once when clearing Dalvik/ART cache in TWRP; might have something to do with signing into Play Services (tbc)
exFAT
"pick up to wake"
sleep/wake on magnetic cover
Should be working now:
notification LED ==> works (for me) on AOSP phh v25 as far as I can tell
"double tap to wake" (DT2W) => see fix in post #191 and following
brightness control => fixed (for me) in AOSP by phh v25; can be enabled on any older ROM by copying /system/overlay/treble-overlay-xiaomi-mipad4.apk from phh v25 (see post #221); alternatively set in build.prop: persist.sys.qcom-brightness 4095
device encryption ==> works by flashing Disable_Dm-Verity-09.02.2018.zip (this ZIP leaves force encryption untouched) (see post #221 for details)
Bluetooth audio => fixed (for me) in AOSP by phh v25
MTP doesn't always work on first try => fixed in AOSP by phh v23 according to change log (I have not tested it yet)
List of selected available GSIs
AOSP by phh: https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
AICP-mordiford: https://treble.andro.plus/ (includes MiPad4 specific tweaks)
Pixel Experience Official: https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
LineageOS by phh: https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
Ressurection Remix Official: https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
Ressurection Remix by phh (use official instead!): https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
Kernel sources have been released in November 2018
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/clover-o-oss
Yes but not from day 1 since u need time to get the permissions
Awesome! I already got the permissions... they are not device-dependent AFAIK.
I'm going to expose my ignorance here, but what are the permissions you're referring to here?
Thanks!
https://en.miui.com/unlock/
Ralfioni said:
Awesome! I already got the permissions... they are not device-dependent AFAIK.
Click to expand...
Click to collapse
But you'll have to wait for the 72hrs. They are device-dependent. I got my Mix 2 a few weeks ago, and even though I already had permissions to UNLOCK in general, I had to wait for another 72hrs just like with my Mi5X before.
It's stupid but you have to wait 72hrs for every new device you want to unlock. But if you relock it after unlocking and then want to unlock it again, you don't have to wait.
René Rinner said:
But you'll have to wait for the 72hrs. They are device-dependent. I got my Mix 2 a few weeks ago, and even though I already had permissions to UNLOCK in general, I had to wait for another 72hrs just like with my Mi5X before.
It's stupid but you have to wait 72hrs for every new device you want to unlock. But if you relock it after unlocking and then want to unlock it again, you don't have to wait.
Click to expand...
Click to collapse
It's 360 hours for newer devices. Had to wait 15 days for my redmi note 5 smfh.
blcistheking said:
It's 360 hours for newer devices. Had to wait 15 days for my redmi note 5 smfh.
Click to expand...
Click to collapse
Was 72hrs for me. But both are so stupid and useless smh
As long as I don't have to wait months and months for a device-specific custom ROM, I can live with the 72 hrs. If anyone successfully installed a GSI on this device, please let us know!
You wont have to wait if you have a MIUI alpha tester account
does anyone here has real development knowledge and not just "i install a GSI and everything will be fine"?
Im actually thinking of buying this device so to let you know without a kernel source, which xiaomi didnt released for now, its VERY HARD to compile a GSI without correct boot.img and i dont mean the stock boot.img rom as (most) vendors modify their ramdisk to only boot their OS.
Also flashing a GSI doesnt mean to give a fully working system from day 1 there could be plenty of bugs even, it just makes the general system ready to work.
Nontheless this could be solved with getting the sources and a bit of device bringup here and there, i even personally prefer the old school way of building and not the GSI way (as it gives you full control of what youre actually building with every parameter tweakable) but thats just a personal thought from me as dev.
nguyenlucky said:
You wont have to wait if you have a MIUI alpha tester account
Click to expand...
Click to collapse
You lucky one
---------- Post added at 07:22 PM ---------- Previous post was at 06:58 PM ----------
Thargorsson said:
does anyone here has real development knowledge and not just "i install a GSI and everything will be fine"?
Im actually thinking of buying this device so to let you know without a kernel source, which xiaomi didnt released for now, its VERY HARD to compile a GSI without correct boot.img and i dont mean the stock boot.img rom as (most) vendors modify their ramdisk to only boot their OS.
Also flashing a GSI doesnt mean to give a fully working system from day 1 there could be plenty of bugs even, it just makes the general system ready to work.
Nontheless this could be solved with getting the sources and a bit of device bringup here and there, i even personally prefer the old school way of building and not the GSI way (as it gives you full control of what youre actually building with every parameter tweakable) but thats just a personal thought from me as dev.
Click to expand...
Click to collapse
As you may have read in the original post, this is just about the installation. Nobody said that everything will be working fine from the beginning on.
nguyenlucky said:
You wont have to wait if you have a MIUI alpha tester account
Click to expand...
Click to collapse
My 2 latest phones unlocked without wait time, i'm not alpha tester AFAIK.
P.Kosunen said:
My 2 latest phones unlocked without wait time, i'm not alpha tester AFAIK.
Click to expand...
Click to collapse
Yeah who knows whats up with Xiaomi. I had to wait 72hrs for both my phones and a few days for getting the permission for unlocking
rr111 said:
You lucky one
---------- Post added at 07:22 PM ---------- Previous post was at 06:58 PM ----------
As you may have read in the original post, this is just about the installation. Nobody said that everything will be working fine from the beginning on.
Click to expand...
Click to collapse
He clearly said "fully working tablet from day 1":angel:
---------- Post added at 12:36 PM ---------- Previous post was at 12:31 PM ----------
Also I decided to buy this tab so in 2-5 days when it arrives + 72 hours I can try to get twrp on this little thing.
Keep us posted
Unluckily the seller doesnt ships from europe as he stated yesterday and I dont wanna pay 250€ plus custom duties plus shipping on this device. I need to wait until the price gets lower or it's available in EU somewhere. Or does anyone knows a good cheap seller who ships to germany?
Thargorsson said:
Unluckily the seller doesnt ships from europe as he stated yesterday and I dont wanna pay 250€ plus custom duties plus shipping on this device. I need to wait until the price gets lower or it's available in EU somewhere. Or does anyone knows a good cheap seller who ships to germany?
Click to expand...
Click to collapse
No sry they cheapest thing i could find was 200€+15€ shipping for the 3+32 version. We'll probably have to wait until it officialy comes to Europe. (If it does at all.)
You can buy it from china without duties (e.g. GearBest)
axiel7 said:
You can buy it from china without duties (e.g. GearBest)
Click to expand...
Click to collapse
No Germany (where he's coming from) and Austria (my country) charge fees when importing from a country outsite of the EU (And maybe other countries idk). This comes in at between 20-40€ and depends on the price of the product. And prices on gearbest are even higher than the other stores due to big demant in china I guess.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Magisk (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and Magisk
Information
My port based on:
firmware: P580KXU1CRJ7 (Tab A with S PEN P580) Android 8.1 with October security patch
firmware: T395XXU3BRJ5 (Tab Active2) Android 8.1 with November security patch
kernel: J600GDXU1ARE2 (Galaxy J6 SM-J600F 2018) 3.18.14
Removed only knox and few features (nfc, fingerprint, radio)
P580/P585 port:
Work
all
Links
LTE version:
WiFi version:
1. 20181101: https://drive.google.com/file/d/1yaV7qPaUd0zxFycJYs6FnSrny8qVbOGm/view?usp=sharing
T395 port:
Work
almost all, this is port from the tablet to the tablet, no any issues with TW or keyboard as was before
Known Issues
- camera (flash working)
- auto brightness too dark
Links
LTE version:
2. 20181101: additional patch (remove crypt data\sdcard for easy backup/restore via TWRP, switch drm to L3 - no HD in netflix, but it's working): https://drive.google.com/file/d/1XyvMZlWq1KvEMxJmC8IVIqwDylDMrqs9/view?usp=sharing
1. 20181101: https://drive.google.com/file/d/1FHEFjwh1NO1mwYBQMIvumyxSO8w4TYYV/view?usp=sharing
WiFi version:
2. 20181101: additional patch (remove crypt data\sdcard for easy backup/restore via TWRP, switch drm to L3 - no HD in netflix, but it's working): https://drive.google.com/file/d/11NAAKHLHXrQuobytac7jDkRwpdh7dcwK/view?usp=sharing
1. 20181027: https://drive.google.com/file/d/1rcg_WGXeTqawv-ZyhL2_yuAaXZJvhPzo/view?usp=sharing
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870/
Thanks
Thanks to Samsung
How are you friend Valera! ?? First of all I appreciate this new port of samsung oreo. It is much better than the previous one due to the fact that it is from tablet to tablet. I installed it 2 hours ago and everything is wonderful, I'm probably my daily driver from now on. I will comment on bugs that I have found, some already mentioned in the OP. Camera does not work
- processing error when starting samsung account session
- blue filter
- gps seems to work
- I have a book cover and the screen does not turn on or off with the magnet
this is all for the moment, while I will continue watching a series in netflix with chromecast that works well in this rom, also the smart view. Thank you! It is a huge job!
Great ... I'm waiting port for t585 version. Good day!
which branch do you use ?? the TouchWiz-8.0? also if the book cover feature isn't working, i saw that the feature isn't enabled in your defcon.
Good morning!
I continue with this rom and it goes very well, but I have found one more problem and that is that the bluetooth is not activated.
Thank you very much for your great work!
Thanks man!!! Btw, can you add navbar? I reqlly would like to see ìt on a touchwizz rom for the tab a??
Nice work Valera. Waiting for t585 version hope you will fix camera also :good:
Hi all
Added port for lte version too.
Also I added small patch - I had remove encrypt data\sdcard, it's really annoying for me - I need backup\restore firmware, because I often back to los 15\16 and then back to port.
Rawwrius01 said:
which branch do you use ?? the TouchWiz-8.0? also if the book cover feature isn't working, i saw that the feature isn't enabled in your defcon.
Click to expand...
Click to collapse
Yes, kernel the same, as for port before.
I'll check cover, may be not today, havn't time at all right now, on weekend I'm sure will be a version.
silly request, a link to your twrp please. I have twrp 3.1.1 on my T585 now, will it work ok?
bobfrantic said:
silly request, a link to your twrp please. I have twrp 3.1.1 on my T585 now, will it work ok?
Click to expand...
Click to collapse
should be enough
Today there was a new stock 8.1 firmware for the P580 (same as our but with s-pen). This is our related tablet with same hardware. As result now we have ideal fully worked port. Right now for T580 only, soon I'll finish it for T585.
This is good, and I hope soon we will get original stock firmware too.
Another great news... btw spen futures can be removed? Because it is unuseful for T585.
On Sammobile you can download original 8.1 FW for p580, p585.
Valera1978 said:
Today there was a new stock 8.1 firmware for the P580 (same as our but with s-pen). This is our related tablet with same hardware. As result now we have ideal fully worked port. Right now for T580 only, soon I'll finish it for T585.
This is good, and I hope soon we will get original stock firmware too.
Click to expand...
Click to collapse
I am struggling to get the ROM working on my p580. With Odin it works but when I make a flash able zip with superr kitchen it stuck at the boot screen. Also the twrp isn't working. How do you got your twrp working on Oreo ?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Oh Valera! why do you do it? LOL
Just kidding! You make me after a tired day of studies in the middle of the night I put to flash my tablet! Hahaha
The port from the Tab P580 must surely go even better, so I'll download it right away, thank you very much for all your great work!
And apparently the official rom oreo for our Tab A T580 / 585 will be launched soon, or so we hope. Maybe this will help future development.
Thank you very much Valera!
Valera1978 said:
Today there was a new stock 8.1 firmware for the P580 (same as our but with s-pen). This is our related tablet with same hardware. As result now we have ideal fully worked port. Right now for T580 only, soon I'll finish it for T585.
This is good, and I hope soon we will get original stock firmware too.
Click to expand...
Click to collapse
It's getting exciting!!
Of course, rom flashed on my tab T580, this version of the P580 works great, I did not find a single error. Thank you very much for this great work.
It is very fast, there is more ram available with respect to nougat, I really love it, new daily driver!
Greetings Valera and thanks for everything
The first problem that is detected so far is that the bluetooth is not activated
Yeah, bluetooth won't turn on in the P580 port.
Waiting for lte version
Android 13 LineageOS 12 ROM
11-02-2023 (ported)
There's no guarantee nothing, don't use it if you don't know what you're doing!
SAVE your DATA before!
Make sure you have a custom recovery installed (TWRP is the preferred recovery. [I'm not using Fox recovery, I'm not going to give you advice.])
TWRP_SZANCSO.img is my work, included 4.9 kernel, included Midnight Commander (mc), fixed many factory bugs, working USB storage mode, and DT2W.
Boot into recovery
Wipe system, vendor, data, cache partitions to clean install.
(If your /data partition secured, maybe need format /data if you want to use this ROM.)
Flash Rom in TWRP (sideload or copy any storage)
Flash OpenGapps (Optional) [I'm not using GAPPS, I'm not going to give you advice.] (NOT TESTED!)
Flash Magisk Root (Optional) [I'm not using Magisk, I'm not going to give you advice.] (NOT TESTED!)
Reboot (If TWRP warn that there is no system, it doesn't matter, go reboot.)
First boot may take up to ~1-2 minutes.
DOWNLOAD
Known issues: -
Not tested: VOLTE, GAPPS, Magisk
Cool things:
-Include Midnight Commander (in adb)
-FM radio
-smart charging
-adb root
-24-25 days standby time (one charge)
-Enforced selinux
-Not encrypted
(I switched to this ROM from Ancient, it's terrible that some projects make many things mandatory (default encrypt, adb without root, etc.). It's sad that Open Source (AOSP) has come this far... They limit you like little kings... [email protected]!)
TWRP kernel source: LINK
OS source (XDA): LINK
ROM OS Version: 13
ROM Kernel: Linux 4.9 Source
ROM info: 13, system_root partition, Android quota removed (easier to go back to earlier 7.x-11.x ROMs), NOT encrypted
Created: 11-02-2023
Last Updated: -
I am not aware that it contains malicious code in the ROM, I have never put it in. This is a ported ROM, all its elements come from the Internet.
You're welcome.
Hey bro,
Will this work with the Redmi Y1 (MDI6S)? it is a rebrand of redmi note 5A for indian market.
Hassan Bolu said:
Hey bro,
Will this work with the Redmi Y1 (MDI6S)? it is a rebrand of redmi note 5A for indian market.
Click to expand...
Click to collapse
I do not know. I can only test it on ugglite.
I don't have this phone anymore but you, my man, are a hero for still porting roms to it. A13 on ugglite? Never thought I'd see that!
thank you is fingerprint working?
simbiyot said:
thank you is fingerprint working?
Click to expand...
Click to collapse
In ugglite has not fingerprint. (At least in mine.)
sorry mistake mine was not ugglite mine is ugg 5a prime. But finger print not working with lineage unofficial.
highly respected🫡
cy4n- said:
I don't have this phone anymore but you, my man, are a hero for still porting roms to it. A13 on ugglite? Never thought I'd see that!
Click to expand...
Click to collapse
Official lineage 20 for ugglite is here
Index of /mirror/lineageos/full/Mi8917/20230505
Hi szanalmas,
if you can please help me.
I have flashed lineage 20 to my Redmi Note 5A from the official site and I have these problems:
1. When I select the front camera I can only see a black screen. It seems that the camera works because I take photos which are totaly blacks.
2. The FM Radio does not work.
Both front camera and FM Radio worked properly and perfect with stock rom.
Thanks in advance for any help.
cchatzim said:
Hi szanalmas,
if you can please help me.
I have flashed lineage 20 to my Redmi Note 5A from the official site and I have these problems:
1. When I select the front camera I can only see a black screen. It seems that the camera works because I take photos which are totaly blacks.
2. The FM Radio does not work.
Both front camera and FM Radio worked properly and perfect with stock rom.
Thanks in advance for any help.
Click to expand...
Click to collapse
Sorry, I've never tried the "OFFICIAL" Lineage version, so I can't help you with that. It's pretty sad that it's so buggy.
I do not (and will not) use "retrofit antics" on my phone. The "retrofit" makes no sense in the case of ugglite.
My ported version is perfect for me.
(I don't even understand why ada12 is promoting it in this thread... It's pretty bad.)
szanalmas said:
Sorry, I've never tried the "OFFICIAL" Lineage version, so I can't help you with that. It's pretty sad that it's so buggy.
I do not (and will not) use "retrofit antics" on my phone. The "retrofit" makes no sense in the case of ugglite.
My ported version is perfect for me.
(I don't even understand why ada12 is promoting it in this thread... It's pretty bad.)
Click to expand...
Click to collapse
Sorry for promoting ... I have tested lineage 20 msm8937 witch retrofit Dynamic partition
in my ugglite Its fully stable ... ( Exept kernel 4.19 still have issue )
ada12 said:
Sorry for promoting ... I have tested lineage 20 msm8937 witch retrofit Dynamic partition
in my ugglite Its fully stable ... ( Exept kernel 4.19 still have issue )
Click to expand...
Click to collapse
From me, everyone uses whatever ROM they want.
My phone has been stable for 6 years, even without a retrofit. (In the case of a 512 MB vendor partition, there is no point the retrofit. I think!)
But then please help our friend with the nickname cchatzim to solve the official LOS problems, thank you!
Hi szanalmas and ada12,
thank you both for your replies and posts.
ada12 did you flash official lineage 20 (mi8917) to your ugglite and you have not any problems with front camera and fm radio?
Hi ada12,
I am sorry but I did not see you post "FIX bug lineage 20 ugglite".
Thank you for your answer and your advices.
As I understand I have to flash the ROM for Mi8937.
cchatzim said:
Hi ada12,
I am sorry but I did not see you post "FIX bug lineage 20 ugglite".
Thank you for your answer and your advices.
As I understand I have to flash the ROM for Mi8937.
Click to expand...
Click to collapse
Ugglite is Mi 8917 based, this one is for https://ftp.acc.umu.se/mirror/lineageos/full/Mi8917/20230505/