Hello friends. Yesterday evening I was going to flash my phone to stock rom. I opened twrp and the touch problem that I had encountered again. I reset the program again and again by holding down the power button, but it has not been worked. then my phone remained open in twrp. This morning I flashed my phone miui beta on miflash. (Android 8.1 9.6.24) The phone is switched on, but the touch issue still not working. If you could help with this situation, I would greatly appreciate it. Thanks.
Use otg mouse and format data, then install again nee rom or oficial miui
atakrkc said:
Hello friends. Yesterday evening I was going to flash my phone to stock rom. I opened twrp and the touch problem that I had encountered again. I reset the program again and again by holding down the power button, but it has not been worked. then my phone remained open in twrp. This morning I flashed my phone miui beta on miflash. (Android 8.1 9.6.24) The phone is switched on, but the touch issue still not working. If you could help with this situation, I would greatly appreciate it. Thanks.
Click to expand...
Click to collapse
use this twrp for touch issues
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
also use latest Franco kernel having different touch drivers! or Optimus drunk kernel
more oever Twisted kernel releases 3 variants on 3 types of touch drivers ,
you should find them in the developer section and try!
i have same issue i have factory reset using fastboot the display is working but touch isnt working ..
Use an otg cable in Twrp, install another kernel, this has already happened to me and the exchange of the kernel stock for a custom one worked
An unknown said:
Use an otg cable in Twrp, install another kernel, this has already happened to me and the exchange of the kernel stock for a custom one worked
Click to expand...
Click to collapse
OMG! Thank you so much! This tip worked for me and I could fix my screen issue. Thank you very much )))
Related
I flashed Iced Bean 4.0 on my xperia sk17i and i think my touch screen died because of it, That rom has aroma installer and there was no my device on that list so i chose xperia pro. Installation was successful but touch screen didnt work. I reverted to stock using flashtools and it still doesnt work. Is there any way to fix this problem? i really need to try something so pleas suggest.
Just to be clear i'm not blaming on anybody, it is total my fault. I'm fully aware of risk installing custom roms so pleas help in any way you can
Thanks in advance
Have you tried to flashing a new kernel which was made for the phone? As far as I know drivers areusually stored within it in Linux / Unix systems so it might apply here for the touch screen as well.
i tried using command fastboot flash boot boot.img and generally did not work. I have unlocked bootloader. I had hard time finding guide to do that for my phone. I did revert to stock using flashtools and ftf file.
When you say fastboot didn't work, do you mean it could not connect to the phone? Where you in fastboot mode when you tried it?
I recently put the 4.4.4 AOPK rom (Link) on my phone and had trouble getting into fastboot to flash the required kernel, I think I solved that by using the flashtool.
If flashing the stock kernel doesn't fix the issue, perhaps using a custom one, which works with ICS, will help?
You can find some here: http://forum.xda-developers.com/showpost.php?p=47407355&postcount=3
-edit-
does this thread help you? [TUT] Fix broken touchscreen problem of xperia mini pro (SK17i,SK17a)
Fastboot worked fine, but any custom kernel after successful flashing didn’t work. I have installed managed to install xperialegacy cm11 it has custom kernel and it didnt fix touch screen. I will try the link you posted. On the side note i bought another sk17 today, yes i love this phone LOL xD
Yess, million times thank you . I made it using this tutorial
here is what you have to do for fix your Bricked touchscreen.
What you need for that is any custom rom with an aroma installer.
1. Flash suitable firmware with Flashtool ( i flashed .587 Because i used Zellycream rom V4 )
2. Then Install any ics Kernel that you like (I installed messa hybrid kernel v4.3 )
3: Then install Any rom that has Aroma installer in it and does support your device, via Cwm recovery (I installed Zellycream V4)
3. While installing the rom choose ST17i in Aroma instead of SK17i
4. Reboot after installation is completed.
5. Wait until phone is On homescree.Nopw touchscreen should work but h/w keyboard not
5. Reboot again into CWM install "keymap_for_pro_XXXX.zip
Link here For Keymap Mini pro
6. Reboot phone again.. Now keyboard and touchscreen should be working. Also options for h/w keyboard should appear now.
Good luck,
It did worked for me hopefully its also going to work for you.
Notice : At first your Touch might not responce how it was before, but give it a time it will work fine after some hours or day or it might never work like before.Mine touch screen worked normally after 8 hours of installing the rom with this method.
Click to expand...
Click to collapse
Now i have questions. Can for some reason touchscreen die again? and also which rom do you recommend for good battery and camera? i like stock but i find it tedious to root and remove all the unwanted apps only to free up a couple of MB and potential screw something
Update: I see that i need to flash a zip which fixes tochscreen. when installing new rom. Is this hardware or software problem?
It would surprise me if the screen died again from the same issue, as the harmful code should have been overwritten by the fix.
I am not a developer though, just a normal user with some basic linux knowledge.
I'd suggest trying out Real ICS. I think I ran it before I got my new phone (I just recently started using the Mini Pro again) and can't remember having any complaints back then.
Other than that you could just go through the rom list. There are some which claim to be focusing on performance, I haven't tried them myself though.
I currently use AOKP kitkat (with some modifications, see this post) but I cannot yet if I'll stick with it. Maybe gonna try out this one http://forum.xda-developers.com/showthread.php?t=2277199 next.
I think im going to stick to the stock for the now. Camera is the best there
I tried swapping motherboard from working sk17i to mine. MB is on stock 2.3 and bt is locked. To my surprises it did not work. Phone boot fine but touch screen does not work. I though this is a software problem, but i guess touch screen device has some controllers or something that were affected too.
Bucov said:
I tried swapping motherboard from working sk17i to mine. MB is on stock 2.3 and bt is locked. To my surprises it did not work. Phone boot fine but touch screen does not work. I though this is a software problem, but i guess touch screen device has some controllers or something that were affected too.
Click to expand...
Click to collapse
I'm confused. Didn't you solve the issue already?
If the damage is permanent, then maybe the touchscreen got damaged by using the wrong rom?
If you really want to have two working phones, you could get a replacent display from ebay. They start at around 30€ these days.
I have the resurrection 5.8.0 installed (30 Dec build) and my phone takes about 5 minutes to boot. Initially it is stuck in the MI logo for about 4 minutes before the animation starts. I have used several ROMS and kernals and they all seem to do the same thing. I never had this issue with MIUI. Once the phone has booted, the phone is totally fine however I would prefer to identify and fix the problem. Any suggestions? I have already done a complete wipe, and tried various verions of TWRP with no joy. Thanks
I suggest you to flash the latest version of MIUI latest china dev, then from fastboot flash twrp, then clean flash rom + kernel. It takes about 30 minutes if you know what you're doing.
So basically restore then start from scratch? That did cross my mind... I will give it a go. Thanks. I will report back here.
ginohabibi said:
So basically restore then start from scratch? That did cross my mind... I will give it a go. Thanks. I will report back here.
Click to expand...
Click to collapse
Hi if you find a fix for this problem please share it with me, I tried latest china dev rom, latest global dev rom and latest global stable rom with all versions the boot time goes to 4-5 minutes...
ufoshop said:
Hi if you find a fix for this problem please share it with me, I tried latest china dev rom, latest global dev rom and latest global stable rom with all versions the boot time goes to 4-5 minutes...
Click to expand...
Click to collapse
Try method in my signature.. it should work for you
khajiit said:
Try method in my signature.. it should work for you
Click to expand...
Click to collapse
Where do i find that method?
https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154
Alright, im going to try that method and i will report my results here.
Followed all the steps within your guide, but that guide didnt work and has nothing to do with our slowboot issue.
Hardware related then
ginohabibi said:
I have the resurrection 5.8.0 installed (30 Dec build) and my phone takes about 5 minutes to boot. Initially it is stuck in the MI logo for about 4 minutes before the animation starts. I have used several ROMS and kernals and they all seem to do the same thing. I never had this issue with MIUI. Once the phone has booted, the phone is totally fine however I would prefer to identify and fix the problem. Any suggestions? I have already done a complete wipe, and tried various verions of TWRP with no joy. Thanks
Click to expand...
Click to collapse
Didnt you change recently some parts of the phone? Like display/baterry and so...?
i think dat guy replaced display module
same problem here, touchscreen cant initialize on boot
4-5mins to go... all rooms.
to solve/ n - use old Santosh kernel, mm - use neon kernel, lp - elementalx
on this cores phone starts on 20-40s
and about recovery - use twrp+ 3.0.2-2 by mr_root
paladzin said:
i think dat guy replaced display module
same problem here, touchscreen cant initialize on boot
4-5mins to go... all rooms.
to solve/ n - use old Santosh kernel, mm - use neon kernel, lp - elementalx
on this cores phone starts on 20-40s
and about recovery - use twrp+ 3.0.2-2 by mr_root
Click to expand...
Click to collapse
So you say there is no solution to run the official rom without waiting 4-5 mins on boot, I have the phone from fastcardtech and maybe is a refurbished unit because they have very low prices compared to other resellers...the phone came in sealed box...
Dwnld links plzz..
Hay anybody here ...is there any other kernal for andriold n ROMs...
paladzin said:
i think dat guy replaced display module
same problem here, touchscreen cant initialize on boot
4-5mins to go... all rooms.
to solve/ n - use old Santosh kernel, mm - use neon kernel, lp - elementalx
on this cores phone starts on 20-40s
and about recovery - use twrp+ 3.0.2-2 by mr_root
Click to expand...
Click to collapse
Mine to, it 2 time I had to replace screen. I'll give a test right now and report back.
Im not using the device anymore, but i think i had to replace the screen like 3-4 times, its very fragile, even a drop from small height makes it crack. Also without case its very slippy device, but none of that matters. From the 4 displays i used, which all have been touchscreen + lcd + the frame (as i dont like to glue the display, i pay 10 dollars more and its better) had that exact same problem, which is very long waiting for the device to boot. The custom kernel solved it, but another (probably better quality) display does solve it too.
Hi guys,
On my Kate model I was on NX ROM 10.4 (Android Marshmallow/6) and wiped my phone, because I wanted to update to NX ROM 11 (Android Nougat/7.12). Then I flashed the Kate-Firmware, NX ROM 11 and Gapps and now my phone does not start at all. Black screen and nothing else.
If I hold the power button for a while, the Mi logo is there for half a second and then the phone turns off again, immediately. I can not even enter TWRP. I can only enter Fastboot (the white thing with a cap on and working on a broken android).
Can anyone tell me what to do now?
Okay, this guide brought back my TWRP, at least:
https://xiaomifirmware.com/guides-and-tips/fix-bricked-redmi-note-3-pro-special-edition/
Maybe this helps other users, too.
I tried to flash NX ROM 11 and the Kate-Firmware from the same page again and my phone got ****ed again.
So, I can definitively say: Do not use that firmware! Somehow it messes up the phone.
xsycox said:
I tried to flash NX ROM 11 and the Kate-Firmware from the same page again and my phone got ****ed again.
So, I can definitively say: Do not use that firmware! Somehow it messes up the phone.
Click to expand...
Click to collapse
I Think this firmware only lock your bootloader.. try using adb to check if bootloader is still unlocked or not.
If is locked just unlock again and should solve your problem
xsycox said:
I tried to flash NX ROM 11 and the Kate-Firmware from the same page again and my phone got ****ed again.
So, I can definitively say: Do not use that firmware! Somehow it messes up the phone.
Click to expand...
Click to collapse
may be u had unlocked ur kenzo using unofficial meyhod
Hello, i flashed twrp it was working after the first run, when i rebooted and installed the decrypt 4.0 (v18) (which can be found here https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405) the touch stopped working, so i proceeded to download the miui global v10.3.7.0 from the official site and flash it with MiFlash, it did work, the phone booted as before but the touch was still not working, so i booted into the recovery mode which was the default one again as i cleared the data and wiped the data but the touch screen stills not working, everything was working fine before flashing the twrp...
please, help is required, idk what to do anymore, and there is almost no xiaomi assistance near
---------
update: lol, i think i was a bit desesperated, to everyone that gets into the same situation, i went going back trying every single MIUI build... the one that worked was V10.2.3.0 - Global, everything is fine now, time to do everything again and get anxiety, sorry.
try twrp 3.3.1 unofficial from
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
also then flash vendor image https://mirror.akhilnarang.me/MIUI/beryllium/ (9.6.27 is the popular)
flash LINAGE OS
flash DFE Treble https://drive.google.com/file/d/1As6z5v7NEIfOk67jXHBX34cbnFZdEjy9/view ,
later install magisk 19.4
now try one by one all three version of Twisted kernels ( the developer maintains 3 versions based on touch drivers (nvt)
https://forum.xda-developers.com/poco-f1/development/kernel-twisted-kernel-v4-0-beryllium-t3902838
i am hopful you will fix it
zyhpex said:
Hello, i flashed twrp it was working after the first run, when i rebooted and installed the decrypt 4.0 (v18) (which can be found here https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405) the touch stopped working, so i proceeded to download the miui global v10.3.7.0 from the official site and flash it with MiFlash, it did work, the phone booted as before but the touch was still not working, so i booted into the recovery mode which was the default one again as i cleared the data and wiped the data but the touch screen stills not working, everything was working fine before flashing the twrp...
please, help is required, idk what to do anymore, and there is almost no xiaomi assistance near
---------
update: lol, i think i was a bit desesperated, to everyone that gets into the same situation, i went going back trying every single MIUI build... the one that worked was V10.2.3.0 - Global, everything is fine now, time to do everything again and get anxiety, sorry.
Click to expand...
Click to collapse
Worked for me! Thanks!
zyhpex said:
Hello, i flashed twrp it was working after the first run, when i rebooted and installed the decrypt 4.0 (v18) (which can be found here https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405) the touch stopped working, so i proceeded to download the miui global v10.3.7.0 from the official site and flash it with MiFlash, it did work, the phone booted as before but the touch was still not working, so i booted into the recovery mode which was the default one again as i cleared the data and wiped the data but the touch screen stills not working, everything was working fine before flashing the twrp...
please, help is required, idk what to do anymore, and there is almost no xiaomi assistance near
---------
update: lol, i think i was a bit desesperated, to everyone that gets into the same situation, i went going back trying every single MIUI build... the one that worked was V10.2.3.0 - Global, everything is fine now, time to do everything again and get anxiety, sorry.
Click to expand...
Click to collapse
I had an experience as bad as yours. After flashing the last miui.eu, I went to boot and the phone does not leave the boot right away. I tried to enter TWRP and the touch just didn't work. I ended up flashing the official TWRP, also none of the touch works. I started getting desperate and settling for formatting for ROM stock and losing my 2 year old data, because I went to fastboot and flashed stock 11.0.8.0 and guess what? the touch didn't work, even in stock, I started to go crazy. So I had the stupid idea of putting the stock and blocking the bootloader, I ended up ****ting even more because even after the flash and blocking the bootloader the touch was dead. I was already giving up and thinking about paying someone as access to EDL mode to restore the phone. I ended up seeing your post and had the idea of plugging a mouse into the cell phone's type c input, and believe me the mouse cursor worked. Then I managed to unlock the bootloader again and flashed the stock that you recommended, and voiala the touch went back to work. I ended up going back to miui.eu and I'm ready for new flashes. It seems that we like to suffer LoL. I think this topic should be fixed at the top in case anyone else falls into this insane problem.
Reflash firmware n try ones.. only firmware
dorfohm2 said:
Worked for me! Thanks!
Click to expand...
Click to collapse
Im having the same issue.What should I do??My touch was working totally well before flashing TWRP.
solved by plugging in a mous in TWRP and navigating the UI to restore my "full" backup of all partitions! if you have done a backup! cheers and thanks for the idea of the mous! not expected it to work in TWRP though!!!
Kinda newbie to the whole custom ROM world. I was recently given a NEXUS 9 that was unwanted. The device worked fine, just had a very old Cyanogenmod build. I updated it to the latest TWRP (3.3.1.0) and loaded lineage-16.0-20180812. The OS load fine but the touchscreen is unresponsive. I can't "unlock" the screen by swiping. No errors during install and I can still ADB and fastboot. Tried rebooting a number of times and went though the process to reflash..no luck. Any suggestions would be greatly appreciated.
jasonsamuel.email said:
Kinda newbie to the whole custom ROM world. I was recently given a NEXUS 9 that was unwanted. The device worked fine, just had a very old Cyanogenmod build. I updated it to the latest TWRP (3.3.1.0) and loaded lineage-16.0-20180812. The OS load fine but the touchscreen is unresponsive. I can't "unlock" the screen by swiping. No errors during install and I can still ADB and fastboot. Tried rebooting a number of times and went though the process to reflash..no luck. Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
My opinion is: First,flash the stock rom , and then you can install the custom rom you want from the beginning with the correct way...
daitalos said:
My opinion is: First,flash the stock rom , and then you can install the custom rom you want from the beginning with the correct way...
Click to expand...
Click to collapse
This did not work for me
[email protected] said:
This did not work for me
Click to expand...
Click to collapse
I do not understand what exactly you mean
What is your problem on this device?