hello everyone
please first read my explanation carefully
my poco wile flashing rom by mi flash tools bricked . its rom before brick was mi 8 ported for pocophone 7.6.24 and its rom in the time of brick was 10.3.6 global
i am in country that there is no xiaomi centers . the best tactician in my country confused because of its error . i have formated its hard but its issue still remained until now .
some errors like can not receive com port . can not receive hello packet and time is end happen during flash rom in edl mod
why edl mod ? because it is on edl mod all time . no fast boot no recovery even no sign just when i plugged it to pc qdloader 9008 appear in device manager
it does not need authorized account i have tested it too . its hard sound well and has no damage . it is not because of drive in computer . its really mad me because no one knows what is this problem of my phone
if any one can help me or give a dump file of it i will appreciate him all my life
please help
Sorry to say this. But your device is hard bricked. It will force itself to edl mode. But I've contacted poco developers they confirmed that edl mode will only work on authorised mi computers and mi tools. We don't have permission to flash via edl. Generally this situation occurrs when all the partitions of the device failed to recognise or corrupted. This may also occur when you disconnect your phone while mi flashing ROM. Only thing you can do is just ask help in nearest authorised service centre. Still there's only a little hope. Most of the times it won't work. Also this includes very special tools which will re partition your entire phone storage and then will be flashed by authorised machines. I'm sorry...
Big yikes.
Hello Packet error usually indicate Mother Board Error! , as @nenushiva said, the device is HARD BRICKED and very little hope!
now what?
1. you may try to find MIFLASHER and modified MIUI rom which doesn't ask EDLI verified account!
2. by using QUALCOM FLASHER, you may force your device in to EDL MODE and try to FLASH THE SAME fastboot rom, (different extensions file are found in the image, Qloader will flash from one of those)
3. to enter in to edl account however you will have to REMOVE the back panel and under batter connector there are two test points! by short circuiting them wand connecting usb to PC you will FORCE POCO to EDL mode!
however its my experience with Redmi 3s, that Hello packet error in Miflash, also ends up with different types of ERROR in Qualcom Flasher! ...
you should consider buying different device
and/or
if anyone going to India try sending poco for motherboard replacement from Authorized service center, but it will cost you the same as any new mobile
nenushiva said:
Sorry to say this. But your device is hard bricked. It will force itself to edl mode. But I've contacted poco developers they confirmed that edl mode will only work on authorised mi computers and mi tools. We don't have permission to flash via edl. Generally this situation occurs when all the partitions of the device failed to recognise or corrupted. This may also occur when you disconnect your phone while mi flashing ROM. Only thing you can do is just ask help in nearest authorised service centre. Still there's only a little hope. Most of the times it won't work. Also this includes very special tools which will re partition your entire phone storage and then will be flashed by authorised machines. I'm sorry...
Click to expand...
Click to collapse
thanks my friend for your answer but i think you said that there is a machine that especially is for flashing rom by its own authorizes account , yes?
because i tried authorized account and i found it from one technician but he hat just the account which is authorized before not an especial machine . and unfortunately he could not fix it . and i have another answer i think when a phone needs authorized account during flash error of authorizing appear not some other errors .
thanks
Zanaxx said:
thanks my friend for your answer but i think you said that there is a machine that especially is for flashing rom by its own authorizes account , yes?
because i tried authorized account and i found it from one technician but he hat just the account which is authorized before not an especial machine . and unfortunately he could not fix it . and i have another answer i think when a phone needs authorized account during flash error of authorizing appear not some other errors .
thanks
Click to expand...
Click to collapse
As per my knowledge. Error just says that your device is hardbricked. You didn't get the point I think your device will automatically be redirected to edl mode automatically no matter what you do. But the thing is your mother board can't recieve the data because of handshake error which is it cannot access your storage and doesn't know where to receive this is why hello packet (handshake) error shows. Only thing that can be done is completely removing your internal storage from mother board (desolder). And partition it (special machine) individually. And then resolder it back to mother board and then you need to flash using mi flash with authorised account .(which is practically useless when the actual device costs 20k). Actually this process will be done on iphones don't know whether it is available for Xiaomi devices.
nenushiva said:
As per my knowledge. Error just says that your device is hardbricked. You didn't get the point I think your device will automatically be redirected to edl mode automatically no matter what you do. But the thing is your mother board can't recieve the data because of handshake error which is it cannot access your storage and doesn't know where to receive this is why hello packet (handshake) error shows. Only thing that can be done is completely removing your internal storage from mother board (desolder). And partition it (special machine) individually. And then resolder it back to mother board and then you need to flash using mi flash with authorised account .(which is practically useless when the actual device costs 20k). Actually this process will be done on iphones don't know whether it is available for Xiaomi devices.
Click to expand...
Click to collapse
i desoldered and removed its storage (nand flash) but i could not found any machine to repartition it and program it , and then re back the formatted storage to mainboard but errors still remain unfortunately
i have a qcn back up and nand twrp backup from it before briched
can they useful for this problem?
can someone help with the explanation of this log for me, apart from the edl authentication part. I would like to know if there's any indication on it showin thta the flash will work or not with edl authentication. Also if there's any thread appropriate for this please let me know. Thanks.
[12:15:04 PM COM4]:MiFlash 2019.12.6.0
[12:15:04 PM COM4]:flash in thread name:COM4,id:24
[12:15:04 PM COM4]:sw in images
[12:15:04 PM COM4]:flash in thread name:COM4,id:24
[12:15:04 PM COM4]:[COM4]:start flash.
[12:15:04 PM COM4]:received hello packet
[12:15:04 PM COM4]rogrammertype: 0
[12:15:04 PM COM4]:vboytest:C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10.0_global\images
[12:15:04 PM COM4]:download programmer file: C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10.0_global\images\prog_ufs_firehose_sdm845_ddr.elf
[12:15:04 PM COM4]:download programmer C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10.0_global\images\prog_ufs_firehose_sdm845_ddr.elf
[12:15:07 PM COM4]:Send done packet
[12:15:07 PM COM4]:file C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10\beryllium_global_images_V11.0.9.0.QEJMIXM_20200706.0000.00_10.0_global\images\prog_ufs_firehose_sdm845_ddr.elf transferred successfully
[12:15:09 PM COM4]:send nop command
[12:15:09 PM COM4]:send command:<?xml version="1.0" ?><data><nop verbose="0" value="ping"/></data>
[12:15:09 PM COM4]:get response from target
[12:15:09 PM COM4]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Call to ufs_open(0, UFS_WLUN_DEVICE) failed:0" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: Jul 6 2020 @ 04:53:09" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: Jul 6 2020 @ 04:53:09
" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Chip serial num: 156575318 (0x9552656)" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Supported Functions (14):" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: program" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: read" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: patch" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: configure" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: setbootablestoragedrive" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: erase" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: power" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: firmwarewrite" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: getstorageinfo" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: benchmark" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: emmc" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: ufs" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: fixgpt" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: End of supported functions 14" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: Jul 6 2020 @ 04:53:09
" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Chip serial num: 156575318 (0x9552656)" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Supported Functions (14):" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: program" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: read" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: patch" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: configure" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: setbootablestoragedrive" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: erase" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: power" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: firmwarewrite" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: getstorageinfo" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: benchmark" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: emmc" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: ufs" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: fixgpt" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: End of supported functions 14" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" /></data>
[12:15:09 PM COM4]:flashSuccess False
[12:15:09 PM COM4]:send configure command
[12:15:09 PM COM4]:send command:<?xml version="1.0" ?><data><configure verbose="0" AlwaysValidate="0" ZlpAwareHost="1" MaxPayloadSizeToTargetInBytes="1048576" MemoryName="ufs" SkipStorageInit="0"/></data>
[12:15:09 PM COM4]:get response from target
[12:15:09 PM COM4]:isFactory False CheckCPUID False
[12:15:09 PM COM4]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
[12:15:09 PM COM4]:before:flashSuccess is False set IsUpdate:True set IsDone False
[12:15:09 PM COM4]:after:flashSuccess is False set IsUpdate:false set IsDone true
[12:15:10 PM COM4]:no Binary dump
[12:15:10 PM COM4]:no Binary dump
[12:15:11 PM COM4]:no Binary dump
[12:15:11 PM COM4]:edl authentication
[12:15:11 PM COM4]:GetUserInfo
[12:15:25 PM COM4]:You are not authorized to Download!!!
[12:15:25 PM COM4]:System.Exception: You are not authorized to Download!!!
at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[12:15:25 PM COM4]:no provision exit:COM4
[12:15:25 PM COM4]:flashSuccess False
[12:15:25 PM COM4]:isFactory False CheckCPUID False
[12:15:25 PM COM4]:before:flashSuccess is False set IsUpdate:True set IsDone True
[12:15:25 PM COM4]:after:flashSuccess is False set IsUpdate:false set IsDone true
Related
Hi everybody, I have a problem with GOLocker...
I want implement it into my ROM then i copy com.jiubang.goscreenlock-1 in data/app but when i flash the ROM and I boot the phone I have the original lockscreen, why?
EDIT: Solved but now I have another problem, I want change the default settings infact the default setting is that the GoLocker isn't enable then I go to C:\ROMCooking\APKManager\projects\com.jiubang.goscreenlock-1.apk\res\xml and i found lock_setting.xml
Original
<?xml version="1.0" encoding="UTF-8"?>
<PreferenceScreen android:title="@string/setting_title"
xmlns:android="http://schemas.android.com/apk/res/android">
<CheckBoxPreference android:title="@string/start_go_lock" android:key="@string/start_go_lock_key" android:defaultValue="false" />
<Preference android:title="@string/my_go_lock" android:key="@string/my_go_lock_key" android:summary="需代码动态赋值" />
<CheckBoxPreference android:title="@string/go_lock_sound" android:key="@string/go_lock_sound_key" android:defaultValue="true" />
<CheckBoxPreference android:title="@string/start_emergency_button" android:key="@string/start_emergency_button_key" android:defaultValue="true" />
</PreferenceScreen>
Click to expand...
Click to collapse
Edited by me
<?xml version="1.0" encoding="UTF-8"?>
<PreferenceScreen android:title="@string/setting_title"
xmlns:android="http://schemas.android.com/apk/res/android">
<CheckBoxPreference android:title="@string/start_go_lock" android:key="@string/start_go_lock_key" android:defaultValue="true" />
<Preference android:title="@string/my_go_lock" android:key="@string/my_go_lock_key" android:summary="需代码动态赋值" />
<CheckBoxPreference android:title="@string/go_lock_sound" android:key="@string/go_lock_sound_key" android:defaultValue="false" />
<CheckBoxPreference android:title="@string/start_emergency_button" android:key="@string/start_emergency_button_key" android:defaultValue="false" />
</PreferenceScreen>
Click to expand...
Click to collapse
Infact if we see the app the first option is that if we want enable GOLocker than I edited the first line changing false to true and the other 2 options but it's not important...
When I install the app the settings aren't changed, it's possible?
Another question: where is Zombie Art By Jack Larson string?
It's in strings.xml?
Upupupupupupupupupupupupupupupupupupup
I am new to Android SDK,but I know JAVA a little.I am on SDK v4.The problem is that,I tried to make 'HelloWidget' Home Screen Widget (with just a text box),and when I try to run the project,the console gives me
Code:
No Launcher Activity Found!
The application will only sync the package to the device!
And my app is nowhere to be found in the AVD.I had tried putting the .MAIN and Launcher in Intent filter,but no good.Here are my files:
AndroidManifest.xml
Code:
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="removed due to newbies are not allowed to post links"
package="ax.startup"
android:versionCode="1"
android:versionName="1.0" >
<uses-sdk android:minSdkVersion="15" />
<uses-permission android:name="android.permission.INTERNET"/>
<application
android:icon="@drawable/ic_launcher"
android:label="@string/app_name" >
<!-- Broadcast Receiver that will process AppWidget updates -->
<receiver android:name=".AxStartup" android:label="AxStartup">
<intent-filter>
<action android:name="android.appwidget.action.APPWIDGET_UPDATE" />
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
<meta-data android:name="android.appwidget.provider"
android:resource="@layout/startup_info" />
</receiver>
</application>
</manifest>
main.xml
Code:
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="removed"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:orientation="vertical" >
<EditText
android:id="@+id/txt1"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:text="HELLO WORLD"
/>
</LinearLayout>
startup_info.xml
Code:
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="removed"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:orientation="vertical" >
<EditText
android:id="@+id/txt1"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:inputType="textMultiLine"
android:text="ITS WORKING DUDE!"
android:minWidth="146dip"
android:minHeight="72dip"
android:updatePeriodMillis="10000"
android:initialLayout="@layout/startup_info">
<requestFocus />
</EditText>
</LinearLayout>
Java file
Code:
package ax.startup;
import android.appwidget.AppWidgetProvider;
public class AxStartup extends AppWidgetProvider {
}
I followed the tutorial from helloandroid website.
And another strange problem is that when I long press on desktop,only options to change wallpaper is coming.There is no 'Add to Home Screen' or 'Widgets' or any other menu!!!
my poco dead can't do anything just only can edl with test point
i just flash with mi flash always got error
[18:57:52]:8 COM8 7,3447857s cannot receive hello packet
[18:58:45]:8 COM8 4,2341644s [18:58:45 COM8]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
:crying::crying:
Are you have auth account?
AsusZenFone3Deluxe said:
Are you have auth account?
Click to expand...
Click to collapse
i dont have auth account :crying::crying::crying: help me
Hi,
Yesterday i was using my phone and in background apps were getting updated on google play as usual. I got a call and after ending that call it got frozen on the call end screen for about 20-30 secs where screen was completely non responsive.
After that it got off..Now my device was dead.
I tried to force reboot using power key+ vol down key several times nothing happend
It is neither going in recovery mode nor in Fastboot mode.
I have used this device as a normal user..Never rooted no pirated apps nothing...Just my device storage was about to get full while app updating i could see storage space running low.
I have tried charging it but no charging indicator nothing
Tried to connect to pc I could see COM9 In MI Flash tool means something is getting detected
I tried to power on while i was connected to PC... i could hear reconnecting sound like when device is disconnected and reconnected again... Thats It!.
One more thing I kept my phone yesterday night in ill ventilated place and in morning my phone was hot... so again i tried this after keeping out for few hours and again it got hot....I dont understand this can some one please help?
I had tons of data in device which is imp and i haven't backed up...Request for a Help!!!
i having same condition on my poco f1
device is dead.
not able to find solution since 2 months even after going to service centre.
Try this hard reset. Try with service center to wipe out storage.
No solution
Logeswaran B said:
Try this hard reset. Try with service center to wipe out storage.
Click to expand...
Click to collapse
Nothing happening....today i visited service center . they could not do anything
they just told to replace mother board which they confirmed working fine
parth94shah said:
Hi,
Yesterday i was using my phone and in background apps were getting updated on google play as usual. I got a call and after ending that call it got frozen on the call end screen for about 20-30 secs where screen was completely non responsive.
After that it got off..Now my device was dead.
I tried to force reboot using power key+ vol down key several times nothing happend
It is neither going in recovery mode nor in Fastboot mode.
I have used this device as a normal user..Never rooted no pirated apps nothing...Just my device storage was about to get full while app updating i could see storage space running low.
I have tried charging it but no charging indicator nothing
Tried to connect to pc I could see COM9 In MI Flash tool means something is getting detected
I tried to power on while i was connected to PC... i could hear reconnecting sound like when device is disconnected and reconnected again... Thats It!.
One more thing I kept my phone yesterday night in ill ventilated place and in morning my phone was hot... so again i tried this after keeping out for few hours and again it got hot....I dont understand this can some one please help?
I had tons of data in device which is imp and i haven't backed up...Request for a Help!!!
Click to expand...
Click to collapse
Man, you are not in this alone. I've been looking for solution for this for 2 weeks plus. I even tried flashing with MIflash and even tried accessing the storage with QFIL partition manager but still i see some authentication thing in all the logs. I'm going to share my log from MIflash here to see if anyone can help out. Also I saw in some post that QFIL may be able to bypass the authentication if you have the right programmer file. Hope there's solution to this cos a lot of people are going through the same and its too sudden. Xiaomi needs to fix the pocophones cos this isn't great.
---------- Post added at 03:10 PM ---------- Previous post was at 03:05 PM ----------
Here's my log from Miflash. I hope someone can explain to me. If there's any hope or means to revive this phone. Thanks.
[12:15:04 PM COM4]:MiFlash 2019.12.6.0
[12:15:04 PM COM4]:flash in thread name:COM4,id:24
[12:15:04 PM COM4]:sw in images
[12:15:04 PM COM4]:flash in thread name:COM4,id:24
[12:15:04 PM COM4]:[COM4]:start flash.
[12:15:04 PM COM4]:received hello packet
[12:15:04 PM COM4]rogrammertype: 0
[12:15:04 PM COM4]:vboytest:C:\beryl\beryllium_global_images_V11.0.9 .0.QEJMIXM_20200706.0000.00_10\beryllium_global_im ages_V11.0.9.0.QEJMIXM_20200706.0000.00_10.0_globa l\images
[12:15:04 PM COM4]:download programmer file: C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM _20200706.0000.00_10\beryllium_global_images_V11.0 .9.0.QEJMIXM_20200706.0000.00_10.0_global\images\p rog_ufs_firehose_sdm845_ddr.elf
[12:15:04 PM COM4]:download programmer C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM _20200706.0000.00_10\beryllium_global_images_V11.0 .9.0.QEJMIXM_20200706.0000.00_10.0_global\images\p rog_ufs_firehose_sdm845_ddr.elf
[12:15:07 PM COM4]:Send done packet
[12:15:07 PM COM4]:file C:\beryl\beryllium_global_images_V11.0.9.0.QEJMIXM _20200706.0000.00_10\beryllium_global_images_V11.0 .9.0.QEJMIXM_20200706.0000.00_10.0_global\images\p rog_ufs_firehose_sdm845_ddr.elf transferred successfully
[12:15:09 PM COM4]:send nop command
[12:15:09 PM COM4]:send command:<?xml version="1.0" ?><data><nop verbose="0" value="ping"/></data>
[12:15:09 PM COM4]:get response from target
[12:15:09 PM COM4]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Call to ufs_open(0, UFS_WLUN_DEVICE) failed:0" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: Jul 6 2020 @ 04:53:09" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: Jul 6 2020 @ 04:53:09
" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Chip serial num: 156575318 (0x9552656)" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Supported Functions (14):" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: program" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: read" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: patch" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: configure" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: setbootablestoragedrive" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: erase" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: power" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: firmwarewrite" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: getstorageinfo" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: benchmark" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: emmc" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: ufs" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: fixgpt" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: End of supported functions 14" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: Jul 6 2020 @ 04:53:09
" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Chip serial num: 156575318 (0x9552656)" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Supported Functions (14):" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: program" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: read" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: patch" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: configure" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: setbootablestoragedrive" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: erase" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: power" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: firmwarewrite" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: getstorageinfo" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: benchmark" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: emmc" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: ufs" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: fixgpt" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: End of supported fu
nctions 14" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" /></data>
[12:15:09 PM COM4]:flashSuccess False
[12:15:09 PM COM4]:send configure command
[12:15:09 PM COM4]:send command:<?xml version="1.0" ?><data><configure verbose="0" AlwaysValidate="0" ZlpAwareHost="1" MaxPayloadSizeToTargetInBytes="1048576" MemoryName="ufs" SkipStorageInit="0"/></data>
[12:15:09 PM COM4]:get response from target
[12:15:09 PM COM4]:isFactory False CheckCPUID False
[12:15:09 PM COM4]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
[12:15:09 PM COM4]:before:flashSuccess is False set IsUpdate:True set IsDone False
[12:15:09 PM COM4]:after:flashSuccess is False set IsUpdate:false set IsDone true
[12:15:10 PM COM4]:no Binary dump
[12:15:10 PM COM4]:no Binary dump
[12:15:11 PM COM4]:no Binary dump
[12:15:11 PM COM4]:edl authentication
[12:15:11 PM COM4]:GetUserInfo
[12:15:25 PM COM4]:You are not authorized to Download!!!
[12:15:25 PM COM4]:System.Exception: You are not authorized to Download!!!
at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR( Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR( Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[12:15:25 PM COM4]:no provision exit:COM4
[12:15:25 PM COM4]:flashSuccess False
[12:15:25 PM COM4]:isFactory False CheckCPUID False
[12:15:25 PM COM4]:before:flashSuccess is False set IsUpdate:True set IsDone True
[12:15:25 PM COM4]:after:flashSuccess is False set IsUpdate:false set IsDone true
Someone please help poco users. This just doesn't look right. It's too sudden
i having same condition on my poco f1
device is dead.
parth94shah said:
Hi,
Yesterday i was using my phone and in background apps were getting updated on google play as usual. I got a call and after ending that call it got frozen on the call end screen for about 20-30 secs where screen was completely non responsive.
After that it got off..Now my device was dead.
I tried to force reboot using power key+ vol down key several times nothing happend
It is neither going in recovery mode nor in Fastboot mode.
I have used this device as a normal user..Never rooted no pirated apps nothing...Just my device storage was about to get full while app updating i could see storage space running low.
I have tried charging it but no charging indicator nothing
Tried to connect to pc I could see COM9 In MI Flash tool means something is getting detected
I tried to power on while i was connected to PC... i could hear reconnecting sound like when device is disconnected and reconnected again... Thats It!.
One more thing I kept my phone yesterday night in ill ventilated place and in morning my phone was hot... so again i tried this after keeping out for few hours and again it got hot....I dont understand this can some one please help?
I had tons of data in device which is imp and i haven't backed up...Request for a Help!!!
Click to expand...
Click to collapse
UP. Same thing happen to me. Im playing Genshin Impact (medium graphics). and suddenly it freeze. Hope there's still ways to revive this.
THREAD CLOSED
Kindly use the existing thread for continuing discussion: https://forum.xda-developers.com/poco-f1/help/poco-f1-suddenly-dead-help-t3958579
Regards,
shadowstep
Forum Moderator
who can help ?
[9:37:15 PM COM5]:MiFlash 2020.3.14.0
[9:37:15 PM COM5]:vboytest index:5
[9:37:15 PM COM5]:flash in thread name:COM5,id:8
[9:37:15 PM COM5]:sw in images
[9:37:15 PM COM5]:flash in thread name:COM5,id:8
[9:37:15 PM COM5]:vboytest do open :
[9:37:15 PM COM5]: serial port COM5 opend successfully
[9:37:15 PM COM5]:[COM5]:start flash.
[9:37:15 PM COM5]:received hello packet
[9:37:15 PM COM5]rogrammertype: 0
[9:37:15 PM COM5]:vboytest:C:\Users\alish\Downloads\Archives\mia3\miaa3\images
[9:37:15 PM COM5]:download programmer file: C:\Users\alish\Downloads\Archives\mia3\miaa3\images\prog_firehose_ddr.elf
[9:37:15 PM COM5]:download programmer C:\Users\alish\Downloads\Archives\mia3\miaa3\images\prog_firehose_ddr.elf
[9:37:22 PM COM5]:Send done packet
[9:37:22 PM COM5]:file C:\Users\alish\Downloads\Archives\mia3\miaa3\images\prog_firehose_ddr.elf transferred successfully
[9:37:24 PM COM5]:send nop command
[9:37:24 PM COM5]:send command:<?xml version="1.0" ?><data><nop verbose="0" value="ping"/></data>
[9:37:24 PM COM5]:get response from target
[9:37:24 PM COM5]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: May 22 2019 @ 17:10:49" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: May 22 2019 @ 17:10:49
" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Chip serial num: 3141983854 (0xbb46de6e)" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Supported Functions (14):" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: program" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: read" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: patch" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: configure" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: setbootablestoragedrive" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: erase" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: power" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: firmwarewrite" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: getstorageinfo" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: benchmark" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: emmc" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: ufs" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: fixgpt" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: End of supported functions 14" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Binary build date: May 22 2019 @ 17:10:49
" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Chip serial num: 3141983854 (0xbb46de6e)" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Supported Functions (14):" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: program" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: read" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: nop" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: patch" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: configure" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: setbootablestoragedrive" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: erase" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: power" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: firmwarewrite" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: getstorageinfo" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: benchmark" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: emmc" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: ufs" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: fixgpt" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: End of supported functions 14" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" /></data>
[9:37:24 PM COM5]:send configure command
[9:37:24 PM COM5]:send command:<?xml version="1.0" ?><data><configure verbose="0" AlwaysValidate="0" ZlpAwareHost="1" MaxPayloadSizeToTargetInBytes="1048576" MemoryName="ufs" SkipStorageInit="0"/></data>
[9:37:24 PM COM5]:get response from target
[9:37:24 PM COM5]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
[9:37:25 PM COM5]:flashSuccess False
[9:37:25 PM COM5]:isFactory False CheckCPUID False
[9:37:25 PM COM5]:before:flashSuccess is False set IsUpdate:True set IsDone True
[9:37:25 PM COM5]:after:flashSuccess is False set IsUpdate:false set IsDone true
[9:37:25 PM COM5]:no Binary dump
[9:37:26 PM COM5]:no Binary dump
[9:37:26 PM COM5]:no Binary dump
[9:37:26 PM COM5]:edl authentication
[9:37:26 PM COM5]:GetUserInfo
[9:37:26 PM COM5]:AuthFlash
[9:37:26 PM COM5]:need edl authentication.
[9:37:26 PM COM5]:authentication edl.
[9:37:26 PM COM5]:send command:<?xml version="1.0" ?><data> <sig TargetName="req" verbose="1"/></data>
[9:37:26 PM COM5]:get response from target
[9:37:26 PM COM5]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<sig TargetName="blob" value="AQAAAIoBAABu3ka7DNKUQPIytMEh6hiJYST41g" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" /></data>
[9:37:27 PM COM5]rigin:AQAAAIoBAABu3ka7DNKUQPIytMEh6hiJYST41g
[9:37:27 PM COM5]:SignEdl
[9:37:35 PM COM5]:authentication failed result -6
[9:37:35 PM COM5]:System.Exception: authentication failed The operation completed successfully
at XiaoMiFlash.code.bl.SerialPortDevice.dlAuth()
at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() at XiaoMiFlash.code.bl.SerialPortDevice.dlAuth()
at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[9:37:35 PM COM5]:no provision exit:COM5
[9:37:35 PM COM5]:flashSuccess False
[9:37:35 PM COM5]:isFactory False CheckCPUID False
[9:37:35 PM COM5]:before:flashSuccess is False set IsUpdate:True set IsDone True
[9:37:35 PM COM5]:after:flashSuccess is False set IsUpdate:false set IsDone true
/// edl mode enabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what are you trying to do? dont use Mi flasher... use Qfil.
you try to convert mia3 to ccea???? you have downloaded the right firmware? i think is not an miflash problem but i'm not sure