20.3.5
https://sourceforge.net/projects/xi...eu_multi_HMK20MI9T_20.3.5_v11-10.zip/download
20.2.27
https://sourceforge.net/projects/xi...u_multi_HMK20MI9T_20.2.27_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261733093
20.1.21 v3
https://sourceforge.net/projects/xi...u_multi_HMK20MI9T_20.1.21_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261709660
20.1.16
https://sourceforge.net/projects/xi...u_multi_HMK20MI9T_20.1.16_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261702714
20.1.9
https://sourceforge.net/projects/xi...eu_multi_HMK20MI9T_20.1.9_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261697783
20.1.2
https://sourceforge.net/projects/xi...eu_multi_HMK20MI9T_20.1.2_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261691932
New links will be posted here.
Can I dirty flash over stable eu 10.3.15?
im using china rom right now, and i really want to try this.
bootloop after dirty flash from 10.3.15 eu & twrp 4pda
damskrey said:
bootloop after dirty flash from 10.3.15 eu & twrp 4pda
Click to expand...
Click to collapse
maybe a fromat data is required.
Anyone succesfully boot? what steps you follow and wich recovery
razielmcr said:
maybe a fromat data is required.
Click to expand...
Click to collapse
I've done many times and it didn't work
damskrey said:
I've done many times and it didn't work
Click to expand...
Click to collapse
Hucast_DL said:
Anyone succesfully boot? what steps you follow and wich recovery
Click to expand...
Click to collapse
Well, I was in latest weekly xiaomu.eu
I flashed this recovery: https://forum.xda-developers.com/mi-9t/development/recovery-unofficial-twrp-xiaomi-redmi-t3960726
Did every wipe posible, And after installing i formated data, and I just booted.
Hope it helps.
Is it Android 10?
razielmcr said:
Well, I was in latest weekly xiaomu.eu
I flashed this recovery: https://forum.xda-developers.com/mi-9t/development/recovery-unofficial-twrp-xiaomi-redmi-t3960726
Did every wipe posible, And after installing i formated data, and I just booted.
Hope it helps.
Click to expand...
Click to collapse
i'll try it :good:
---------- Post added at 08:59 AM ---------- Previous post was at 08:47 AM ----------
razielmcr said:
Well, I was in latest weekly xiaomu.eu
I flashed this recovery: https://forum.xda-developers.com/mi-9t/development/recovery-unofficial-twrp-xiaomi-redmi-t3960726
Did every wipe posible, And after installing i formated data, and I just booted.
Hope it helps.
Click to expand...
Click to collapse
after flash miui 11 eu, whether the old twrp still exists or replaced the old twrp with twrp.lr? because mine is like that and can't pass boot splash
Hucast_DL said:
Anyone succesfully boot? what steps you follow and wich recovery
Click to expand...
Click to collapse
Hello, succesful boot here!
TWRP from xiaomi.eu here https://androidfilehost.com/?w=files&flid=50678
Steps I followed:
1. Format data
2. Wipe system, cache, dalvik and data
3. Flash xiaomi.eu 9.9.26
4. Reboot system, it will reboot at a chinese recovery that I think is from xiaomi.eu 9.9.26 zip
5. Then flash again xiaomi.eu 9.9.26 zip (I don't know if it was neccesary but did it anyway )
6. Reboot system and that's it!
After finishing initial configuration I reboot in twrp again and flash Magisk from https://github.com/topjohnwu/Magisk/releases/download/v19.3/Magisk-v19.3.zip
Now in MIUI 11 with root and everything running smooth!
damskrey said:
i'll try it :good:
---------- Post added at 08:59 AM ---------- Previous post was at 08:47 AM ----------
after flash miui 11 eu, whether the old twrp still exists or replaced the old twrp with twrp.lr? because mine is like that and can't pass boot splash
Click to expand...
Click to collapse
I dont know what you mean
Edu Lezcano said:
Hello, succesful boot here!
TWRP from xiaomi.eu here https://androidfilehost.com/?w=files&flid=50678
Steps I followed:
1. Format data
2. Wipe system, cache, dalvik and data
3. Flash xiaomi.eu 9.9.26
4. Reboot system, it will reboot at a chinese recovery that I think is from xiaomi.eu 9.9.26 zip
5. Then flash again xiaomi.eu 9.9.26 zip (I don't know if it was neccesary but did it anyway )
6. Reboot system and that's it!
After finishing initial configuration I reboot in twrp again and flash Magisk from https://github.com/topjohnwu/Magisk/releases/download/v19.3/Magisk-v19.3.zip
Now in MIUI 11 with root and everything running smooth!
Click to expand...
Click to collapse
still stuck in bootsplash
Is it support OTA update??
Anyone knows a working twrp for this build?
damskrey said:
still stuck in bootsplash
Click to expand...
Click to collapse
Format data and reboot
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
razielmcr said:
Anyone knows a working twrp for this build?
Click to expand...
Click to collapse
For me works the russian twrp (fix from 4pda)
Hucast_DL said:
Format data and reboot
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
For me works the russian twrp (fix from 4pda)
Click to expand...
Click to collapse
Any bugs on miui 11?
haharoldkini said:
Any bugs on miui 11?
Click to expand...
Click to collapse
For the moment all working good
Hucast_DL said:
Format data and reboot
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
For me works the russian twrp (fix from 4pda)
Click to expand...
Click to collapse
After format data still stuck in bootsplash
razielmcr said:
Anyone knows a working twrp for this build?
Click to expand...
Click to collapse
twrp chinese version. it works
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
im having an issue on dual apps and gcam hdr+
---------- Post added at 04:23 AM ---------- Previous post was at 04:22 AM ----------
haharoldkini said:
Any bugs on miui 11?
Click to expand...
Click to collapse
i found bug on dual apps and gcam HDR+
---------- Post added at 04:24 AM ---------- Previous post was at 04:23 AM ----------
damskrey said:
After format data still stuck in bootsplash
Click to expand...
Click to collapse
format data and type "yes" dont include the quotations.
Related
BlackCherryS ROM is a combination of the four Super ROMs Available
Paranoid Android + AOKP + Cyanogenmod + MoKee =BlackCherryS
ScreenShot:
View attachment 2507561
View attachment 2507562
View attachment 2507563
View attachment 2507564
View attachment 2507565
View attachment 2507566
Video from This Rom :
Thanks to cobra11111
http://www.youtube.com/watch?v=t5d2tU3ZuGg&hd=1
Thanka to Troubadour666
little review too here , with xposed activated.
Features:
All in One Rom [PA, AOKP CM & MoKee]
* Latest Version Nightly Builds
* All Features from CM
* Parts from Slim Bean
* Parts from Carbon
* Parts from PAC-Man
* Of course KitKat 4.4
Not work:* You tell me
Changelog:
Press me
How to install:
* Download the ROM and GApps
* Reboot to Recovery
* Wipe data/factory reset
* Format System
* Flash the ROM and then GAapps
* Wipe Cache and Dalvik Cache
* Reboot your phone
* Enjoy
Download Link:
Mod Edit link removed
GAPPS:
gapps-kk-20131208.zip
My website:
Press me
Thanks to:
Cyanogenmod
AOKP
MoKee
Pa
Pac-man
Slimroms
Sent from my iPhone using Tapatalk
1st will try soon
Sent from my GT-N7105 using Tapatalk
Will also give it a whirl. Not very active in here but always nice to see new ROMs and devs pop in
Sent from my Note II using XDA Premium 4 mobile app
shingers5 said:
Will also give it a whirl. Not very active in here but always nice to see new ROMs and devs pop in
Sent from my Note II using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried and loved it, but there is one problem.
After flashing rom and gapps, i reboot it and instal titanium backup. However, after I finish to restore all my apps (only apps, not data) and reboot the phone again, then i get a message of " FC system UI, blame Tyler ", which i am not able to stop
Any recommendations to avoid tis problem?
mant thanks for the great rom
Woooow new ROMS pops up. Will give it a try
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Wich recovery is recomended for flash?
---------- Post added at 08:29 PM ---------- Previous post was at 07:41 PM ----------
I flashed it but no imei and no SIM?
pasil.pt said:
I tried and loved it, but there is one problem.
After flashing rom and gapps, i reboot it and instal titanium backup. However, after I finish to restore all my apps (only apps, not data) and reboot the phone again, then i get a message of " FC system UI, blame Tyler ", which i am not able to stop
Any recommendations to avoid tis problem?
mant thanks for the great rom
Click to expand...
Click to collapse
Try using a different gapps. The gapps in the Original Post is outdated..
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
bihslk said:
Woooow new ROMS pops up. Will give it a try
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Wich recovery is recomended for flash?
---------- Post added at 08:29 PM ---------- Previous post was at 07:41 PM ----------
I flashed it but no imei and no SIM?
Click to expand...
Click to collapse
Don't use Twrp to flash. Use Cwm or Philz Touch Recovery for 4.4 ROMs.
OmegaBlaze said:
Try using a different gapps. The gapps in the Original Post is outdated..
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
Don't use Twrp to flash. Cwm or Philz Touch Recovery.
Click to expand...
Click to collapse
I flashed with CWM but no baseband now
bihslk said:
I flashed with CWM but no baseband now
Click to expand...
Click to collapse
Go to the Google play store and download "SELinux Mode Changer".
Click the button, and reboot.
Tell me if it works.
@OP, could you please deodex next nightly? That it is odexed is the reason the themechooser is not working!
Gesendet von meinem GT-N7105 mit Tapatalk
OmegaBlaze said:
Go to the Google play store and download "SELinux Mode Changer".
Click the button, and reboot.
Tell me if it works.
Click to expand...
Click to collapse
Will try but one thing i forgot to mention is that im at 4.3 Knox bootloader
SELinux mode Changer dont work with Knox Bootloader
---------- Post added at 09:15 PM ---------- Previous post was at 08:55 PM ----------
Come On OP any idea?
bihslk said:
I flashed with CWM but no baseband now
Click to expand...
Click to collapse
many thanks
I used last PA Gapps, from Jan,11, but I have been using TWRP 2.6.31., which is already prepared for 4.4 ROMS (OSE, OMNI, Blackbean. Teamsec, etc work well)
This "blame tyler" issue used to happen with BAM and PROBAM Roms as well
pasil.pt said:
many thanks
I used last PA Gapps, from Jan,11, but I have been using TWRP 2.6.31., which is already prepared for 4.4 ROMS (OSE, OMNI, Blackbean. Teamsec, etc work well)
This "blame tyler" issue used to happen with BAM and PROBAM Roms as well
Click to expand...
Click to collapse
I dont know what you mean?
I flashed ROM with latest CWM without problem. But have no baseband?
pasil.pt said:
I tried and loved it, but there is one problem.
After flashing rom and gapps, i reboot it and instal titanium backup. However, after I finish to restore all my apps (only apps, not data) and reboot the phone again, then i get a message of " FC system UI, blame Tyler ", which i am not able to stop
Any recommendations to avoid tis problem?
mant thanks for the great rom
Click to expand...
Click to collapse
you should refrain from using TB to restore apps as thats your issue right. use a different restore/backup method as TB causes issues. its abvious one of the apps restored has caused this issue
bihslk said:
Will try but one thing i forgot to mention is that im at 4.3 Knox bootloader
SELinux mode Changer dont work with Knox Bootloader
---------- Post added at 09:15 PM ---------- Previous post was at 08:55 PM ----------
Come On OP any idea?
Click to expand...
Click to collapse
use philz recovery as twrp and cwm seem to have issues flashing the rom correctly. very latest cwm should be fine and i know philz is as thats what i used
shingers5 said:
you should refrain from using TB to restore apps as thats your issue right. use a different restore/backup method as TB causes issues. its abvious one of the apps restored has caused this issue
use philz recovery as twrp and cwm seem to have issues flashing the rom correctly. very latest cwm should be fine and i know philz is as thats what i used
Click to expand...
Click to collapse
Ok i will give it a try...
---------- Post added at 09:44 PM ---------- Previous post was at 09:41 PM ----------
Flashed Philz Recovery and get status 7 Version 6.0.3.1
bihslk said:
Ok i will give it a try...
---------- Post added at 09:44 PM ---------- Previous post was at 09:41 PM ----------
Flashed Philz Recovery and get status 7 Version 6.0.3.1
Click to expand...
Click to collapse
get latest philz recovery mate
i used it to flash not long before
shingers5 said:
get latest philz recovery mate
i used it to flash not long before
Click to expand...
Click to collapse
Downloaded latest and flashed. Now Rom is booting. I hope the baseband is there
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
No still no baseband.and no sim pin.
I think im reverting back to stock
You could try plasma kernel from verizon section, works with t0lte. Have baseband with it, flashed with twrp 2.6.3.1 t0lteatt.
Gesendet von meinem GT-N7105 mit Tapatalk
Already flashing STOCK rom. I dont want to mess with those roms anymore.
Baseband should be there as usual and not being flashed separatly.
bihslk said:
I dont know what you mean?
I flashed ROM with latest CWM without problem. But have no baseband?
Click to expand...
Click to collapse
shingers5 said:
you should refrain from using TB to restore apps as thats your issue right. use a different restore/backup method as TB causes issues. its abvious one of the apps restored has caused this issue
use philz recovery as twrp and cwm seem to have issues flashing the rom correctly. very latest cwm should be fine and i know philz is as thats what i used
Click to expand...
Click to collapse
I agree maybe the issue is caused by TB.
I am able to restore all apps with TB, and everytyhing seems ok (baseband ok, no FC messages), but when a reboot the device again them the "FC System UI Balme Tyler" message comes up every second...
I will try to backup with another app
many thanks
bihslk said:
Already flashing STOCK rom. I dont want to mess with those roms anymore.
Baseband should be there as usual and not being flashed separatly.
Click to expand...
Click to collapse
You need to go back to stock to get imei and baseband back then flash ROM again with philz latest recovery. Flashing with philz after losing it won't get it back.
Sent from my Note II using XDA Premium 4 mobile app
***Posting this on behalf of CM developer, @dhacker29 , for this device***
Source can be found at https://github.com/CyanogenMod
This is a unified build for the Nexus 6
To build CyanogenMod for yourself you can follow http://wiki.cyanogenmod.org/w/Build_for_shamu
If you'd rather not extract files from the latest CyanogenMod build you can add vendor.xml to your .repo/local_manifests folder.
Details on Installing and downloading CyanogenMod can be found here: http://wiki.cyanogenmod.org/w/Shamu_Info
Official nightlies can be downloaded here: http://download.cyanogenmod.org/?device=shamu
Gapps: http://wiki.cyanogenmod.org/w/Gapps
Known Issues: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_shamu
Changelog: http://www.cmxlog.com/12.1/shamu/
Before you post a bug report:
Please ensure you have done a full wipe of data and formatted system under Mounts and Storage.
If you have flashed parts for other versions you may need to do a full flash of the factory software for your model and start clean.
Do not report bugs in nightlies to jira.cyanogenmod.org
Enjoy!
Well this is fun!
Glad to see something official from the team in the Nexus 6 forums, thank you.
Nice to see!
Not sure what happened. There is no official nightly build since the last one 06/18. Hopefully, there will be new one soon.
What should be? Build 19:05 aboard Because a build error, you can always check Jenkins. And on 20.05 no build for any device. Maybe some work on the server, or else.
Edit: Jenkins Build now 21-05 Nightlys
cN anyone tell me what kernel to use with cm12.1 to stay decrypted
Sent from my Nexus 6
dkotoric said:
cN anyone tell me what kernel to use with cm12.1 to stay decrypted
Sent from my Nexus 6
Click to expand...
Click to collapse
Zen Any Kernel, top name but one.
Sent from my Nexus 6 using Tapatalk
micmars said:
Zen Any Kernel, top name but one.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
doesnt work for me system UI keeps crashing
Sent from my Galaxy S6
dkotoric said:
doesnt work for me system UI keeps crashing
Sent from my Galaxy S6
Click to expand...
Click to collapse
Which version...V21, RC2, folks indicated zero issues with this rom.
Sent from my Nexus 6 using Tapatalk
Rule #1 of cm nighltlies is its going to break compatibility with kernels randomly
Wait for the Dev to update the kernel or flash an older nightly
Yay for official CM12.1! :good:
I've tried to clean flash CM 12.1 and disable encryption but I haven't had any luck.
My process:
1. Factory reset in TWRP 2.6.1
2. Wipe System, Data, Cache, Dalvik individually
3. Flash CM Nightly
3. Flash Full Slim Gapps
3. Flash Leankernel
4. Flash SuperSU because I prefer it
After a lengthy boot it still says "Encrypted" under Security in Settings.
What am I missing? I don't need to wipe the SD card too, right?
Thanks!
akanealw said:
I've tried to clean flash CM 12.1 and disable encryption but I haven't had any luck.
My process:
1. Factory reset in TWRP 2.6.1
2. Wipe System, Data, Cache, Dalvik individually
3. Flash CM Nightly
3. Flash Full Slim Gapps
3. Flash Leankernel
4. Flash SuperSU because I prefer it
After a lengthy boot it still says "Encrypted" under Security in Settings.
What am I missing? I don't need to wipe the SD card too, right?
Thanks!
Click to expand...
Click to collapse
Format internal storage .
---------- Post added at 04:56 AM ---------- Previous post was at 04:55 AM ----------
pantmunu said:
Format internal storage .
Click to expand...
Click to collapse
Make sure u back up tho .. And save it to a PC .
---------- Post added at 04:57 AM ---------- Previous post was at 04:56 AM ----------
pantmunu said:
Format internal storage .
---------- Post added at 04:56 AM ---------- Previous post was at 04:55 AM ----------
Make sure u back up tho .. And save it to a PC .
Click to expand...
Click to collapse
Flash cm and then format internal storage.
So not just the data partition then, I need to backup and wipe all partitions?
SystemUI fc
I've been flashing nightlies regularly with leanKernel to stay decrypted.
The last one working for me is the one from May 12th.
Every other one I've tried since then ends up with SystemUI stuck in a FC loop on startup.
akanealw said:
So not just the data partition then, I need to backup and wipe all partitions?
Click to expand...
Click to collapse
Yup.
---------- Post added at 06:09 AM ---------- Previous post was at 06:07 AM ----------
akanealw said:
So not just the data partition then, I need to backup and wipe all partitions?
Click to expand...
Click to collapse
Do this .. Wipe as you would normally do . flash the ROM. Flash lean and format internal storage. That way u might actually boot unencrypted so u can download gaps straight to your phone.
xtzz said:
I've been flashing nightlies regularly with leanKernel to stay decrypted.
The last one working for me is the one from May 12th.
Every other one I've tried since then ends up with SystemUI stuck in a FC loop on startup.
Click to expand...
Click to collapse
can u post a mirror of the 05/12 nightly, the downloading links are broken for the older ones on cm site
Sent from my Galaxy S6
I hardly doubt that - it's not on my phone anymore.. will check if I have it somewhere at home, when I'm back.
Google it around.
I'm running CM12.1 build 5/17 with leanKernel 1.8.5 with no FCs.
I have CM12.1 build 5/9 if anyone wants that.
As some of you might know, open kirin's team has posted on their site many treble roms compatible with the honor 7x. They are all available on this website:
https://openkirin.net/download/
So I thought this thread could allow everyone to say which rom is best for him
Looks good ...
I am waiting for Lineage to come out of Beta
Has anyone tried both the phhusson and OpenKirin versions of Lineage?
I'm currently running Lineage v4 from phhusson's Treble-experimentations github, but I'm curious if anyone has tried both and can compare?
I'm runing phhusson's lineageos , will try this version.
I feel like this is the wrong place to post something like this, @OldDroid and other developers will do so here at their leisure...
---------- Post added at 05:06 AM ---------- Previous post was at 04:59 AM ----------
ghatothkach said:
Looks good ...
I am waiting for Lineage to come out of Beta
Click to expand...
Click to collapse
Just flash it now, it's pretty much bugless...
RR on the other hand is not lmao
TheLunk said:
Has anyone tried both the phhusson and OpenKirin versions of Lineage?
I'm currently running Lineage v4 from phhusson's Treble-experimentations github, but I'm curious if anyone has tried both and can compare?
Click to expand...
Click to collapse
I have tried, OpenKirin's LOS is by far superior.
It passes SafetyNet and is much more stable and optimized for Huawei devices.
I am currently testing RRos 6.0.0 which has been posted on XDA, but I plan to install Lineage OS beta 4, Can I flash it over the other rom without having to do a complete wipe? Does anyone know if gapps are included in the rom?
AlexLebul said:
I am currently testing RRos 6.0.0 which has been posted on XDA, but I plan to install Lineage OS beta 4, Can I flash it over the other rom without having to do a complete wipe? Does anyone know if gapps are included in the rom?
Click to expand...
Click to collapse
No and yes.
Regards
OldDroid said:
No and yes.
Regards
Click to expand...
Click to collapse
Thanks! And what about the official version of ResurrectionRemix? Can I flash it over the XDA version I currently running?
VOLTE working on any rom?
crayonicle said:
I feel like this is the wrong place to post something like this, @OldDroid and other developers will do so here at their leisure...
---------- Post added at 05:06 AM ---------- Previous post was at 04:59 AM ----------
Just flash it now, it's pretty much bugless...
RR on the other hand is not lmao
I have tried, OpenKirin's LOS is by far superior.
It passes SafetyNet and is much more stable and optimized for Huawei devices.
Click to expand...
Click to collapse
Can I flash it with TWRP? Only ask because the site says they don't support or recommend (not sure how it's worded) using TWRP.
kingd421 said:
Can I flash it with TWRP? Only ask because the site says they don't support or recommend (not sure how it's worded) using TWRP.
Click to expand...
Click to collapse
These new treble-based ROMs should be flashed with "fastboot flash system /path/to/system.img".
firstamendment said:
These new treble-based ROMs should be flashed with "fastboot flash system /path/to/system.img".
Click to expand...
Click to collapse
Do I need to wipe system before I flash
kingd421 said:
Do I need to wipe system before I flash
Click to expand...
Click to collapse
Wipe system data Dalvic and cache in twrp. Than flash rom.
allrockedout said:
Wipe system data Dalvic and cache in twrp. Than flash rom.
Click to expand...
Click to collapse
Thought so. Thank you.
Emui 5.1 support?
I want to know if i can install these roms on emui 5.1. I read in support it requires emui 8?
And please provide a good rom to upgrade to,from emui 5.1 if i can't install openkirin roms. Thanks
I flashed lineageos beta4 with fastboot , complete wipe and alwayes display "Just a sec... ", so i flashed phhusson's version and display " com.android.phone has stopped" :crying:
IUN KHAN said:
I want to know if i can install these roms on emui 5.1. I read in support it requires emui 8?
And please provide a good rom to upgrade to,from emui 5.1 if i can't install openkirin roms. Thanks
Click to expand...
Click to collapse
The Reason openkirin works on EMUI 8 is treble support which EMUI 5.1 doesn't have. Update your phone EMUI 8 then you can try any treble rom rom like openkirin, pH treble.
---------- Post added at 11:41 AM ---------- Previous post was at 11:37 AM ----------
TamuMassif said:
I flashed lineageos beta4 with fastboot , complete wipe and alwayes display "Just a sec... ", so i flashed phhusson's version and display " com.android.phone has stopped" :crying:
Click to expand...
Click to collapse
Clean flash it. Wipe cache + format it
Running the LOS beta4 build now, and its looking really good...
It took me a few tries to get a stable install. First couple of installs I was getting a ton of force-close on various apps. I'm wondering if it might have been due to me trying to use the Lineage SU addon, instead of magisk? I think I tried to install via TWRP once or twice, too, rather than through fastboot.
As of this moment, Ive got it running with the OpenKirin build of TWRP, and magisk 16.4 and it even seems to pass SafetyNet check!
Final good install steps were:
- boot into TWRP, do advanced wipe of all but SD card, then format (the "yes" option one)
- install the LOSbeta4 to system from fastboot ( fastboot flash system openkirin_los_beta4.img )
- boot OS and do basic android config
- reboot into TWRP, install magisk 16.4, clear davlik/cache, reboot to OS
- install magiskmanager 5.7
- ???
- profit
Thanks again for the heads-up on these builds...
firstamendment said:
These new treble-based ROMs should be flashed with "fastboot flash system /path/to/system.img".
Click to expand...
Click to collapse
How about future updates? OTA? Cause I wonder if I shall flash TWRP if fastboot is just fine.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
Can we have Honor/Huawei camera with this ROM? Or else how can we use the dual camera functions?
optionalmgrr.la said:
How about future updates? OTA? Cause I wonder if I shall flash TWRP if fastboot is just fine.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
Can we have Honor/Huawei camera with this ROM? Or else how can we use the dual camera functions?
Click to expand...
Click to collapse
I don't know about other openkirin ROMs but lineage 15.1 v4 has huawei stock camera built-in.
there's so many, not sure which one I should choose
Pitchblack recovery. Imo
Mcha01 said:
Pitchblack recovery. Imo
Click to expand...
Click to collapse
can u please share the link?
Sky hawk recovery project is nice imo https://forum.xda-developers.com/poco-f1/development/recovery-skyhawk-recovery-project-t3905564
Ashiq.makkar said:
there's so many, not sure which one I should choose
Click to expand...
Click to collapse
I always stick to the TWRP as many other build's are twrp driven!
twrp3.3.0 official is out but it has some touch issues to there has been twrp3.3.0-fixed-unofficial, which i am using NOW and its working perfect
please see this
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
---------- Post added at 08:31 PM ---------- Previous post was at 08:16 PM ----------
Ashiq.makkar said:
can u please share the link?
Click to expand...
Click to collapse
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
5july19 is the latest
YasuHamed said:
I always stick to the TWRP as many other build's are twrp driven!
twrp3.3.0 official is out but it has some touch issues to there has been twrp3.3.0-fixed-unofficial, which i am using NOW and its working perfect
please see this
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
---------- Post added at 08:31 PM ---------- Previous post was at 08:16 PM ----------
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
5july19 is the latest
Click to expand...
Click to collapse
is there any bugs with the unofficial twrp??
Ashiq.makkar said:
is there any bugs with the unofficial twrp??
Click to expand...
Click to collapse
I Believe they only changed the touch drivers! i never found so far any bugs (according to the level / command i execute) flashing custom roms & magisk.
YasuHamed said:
I Believe they only changed the touch drivers! i never found so far any bugs (according to the level / command i execute) flashing custom roms & magisk.
Click to expand...
Click to collapse
Having trouble flashing TWRP trough fastboot, keep getting a small white line at the top left corner. Any idea how to avoid this, and have TWRP installed as recovery?
I use the one which is on crDroid's sourceforge page. Its called TWRP 3.3.0 beryllium fixed. It works fine for me, decrypts and touch seems fine. I tried that 3.3.1 unofficial, but that couldnt decrypt for me, it wouldnt recognise my pattern.
https://sourceforge.net/projects/crdroid/files/beryllium/TWRP/
donk165 said:
I use the one which is on crDroid's sourceforge page. Its called TWRP 3.3.0 beryllium fixed. It works fine for me, decrypts and touch seems fine. I tried that 3.3.1 unofficial, but that couldnt decrypt for me, it wouldnt recognise my pattern.
https://sourceforge.net/projects/crdroid/files/beryllium/TWRP/
Click to expand...
Click to collapse
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
YasuHamed said:
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
Click to expand...
Click to collapse
do i need to flash DFE after flashing the recovery?
Ashiq.makkar said:
do i need to flash DFE after flashing the recovery?
Click to expand...
Click to collapse
I flash DFE after ROM & Kernel (i used different kernel(s)) and before Magisk
should i flash DFE and Magisk everytime after flashing a new kernel ? even if i have flashed magisk and DFE already
YasuHamed said:
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
Click to expand...
Click to collapse
i flashed it via fastboot and it's showing decrypt data
Ashiq.makkar said:
i flashed it via fastboot and it's showing decrypt data
Click to expand...
Click to collapse
try flashing DFE please!
and also please tell what rom was previously installed?
YasuHamed said:
try flashing DFE please!
and also please tell what rom was previously installed?
Click to expand...
Click to collapse
I've been on global stable miui.couldn't flash DFE because Data decrypted and couldn't access storage
orangefox by far the best recovery
pitt93 said:
orangefox by far the best recovery
Click to expand...
Click to collapse
tried it.having data decrypt problem
Always use latest TWRP.
UltraSphinx said:
Always use latest TWRP.
Click to expand...
Click to collapse
having touch issues
Hey Guys,
So sad that we havent the support and modding oneplus stands for... No Teamwin till now on our beloved oneplus 7t pros.. Someone knows something about Teamwin for Android 10?is someone working on it?
Thanks
They are working on it.
No idea if or when it will be available.
Sent from my OnePlus7TPro using XDA Labs
Enjoy Arter kernel & Renovate ICE ROM meantime.......
I asked the dev yesterday, and he said the work will be done, but they didnt started yet...
elmor0 said:
Enjoy Arter kernel & Renovate ICE ROM meantime.......
Click to expand...
Click to collapse
HI...
This kernel requer format /data with f2fs.
How format without trwp?
You installer this kernel in op7t pro?
jotha.dx said:
HI...
This kernel requer format /data with f2fs.
How format without trwp?
You installer this kernel in op7t pro?
Click to expand...
Click to collapse
Pretty easy to install - follow the OP's instructions!
In summary:
- Root
- Download Arter kernel .zip
- Install Franco kernel manager (FKM)
- Use 'manual flasher' in FKM to flash kernel
(& enjoy amazing battery life)
---------- Post added at 07:35 PM ---------- Previous post was at 07:24 PM ----------
OP7T Pro is supported for by Arter kernel.
Working smoothly on my OP7T Pro since installed.
elmor0 said:
Pretty easy to install - follow the OP's instructions!
In summary:
- Root
- Download Arter kernel .zip
- Install Franco kernel manager (FKM)
- Use 'manual flasher' in FKM to flash kernel
(& enjoy amazing battery life)
---------- Post added at 07:35 PM ---------- Previous post was at 07:24 PM ----------
OP7T Pro is supported for by Arter kernel.
Working smoothly on my OP7T Pro since installed.
Click to expand...
Click to collapse
Hi went to download the Arter kernel file but there are quite a few which one is the recommended file to install?:confused
---------- Post added at 04:09 PM ---------- Previous post was at 04:04 PM ----------
Disregard I downloaded r54.
elmor0 said:
Pretty easy to install - follow the OP's instructions!
In summary:
- Root
- Download Arter kernel .zip
- Install Franco kernel manager (FKM)
- Use 'manual flasher' in FKM to flash kernel
(& enjoy amazing battery life)
---------- Post added at 07:35 PM ---------- Previous post was at 07:24 PM ----------
OP7T Pro is supported for by Arter kernel.
Working smoothly on my OP7T Pro since installed.
Click to expand...
Click to collapse
HI...
Installation ok with FKM, but to use the features of kernel arte97 he asks to format the partition / data for f2fs over Ext4 .... How to format without having twrp?
jotha.dx said:
HI...
Installation ok with FKk, but to use the features of karnel arte97 he asks to format the partition / data for f2fs over Ext4 .... How to format without having twrp?
Click to expand...
Click to collapse
F2fs is not required and not possible without TWRP.
You can still use kernel fine by just flashing on FKM.
Sent from my OnePlus7TPro using XDA Labs
elmor0 said:
Enjoy Arter kernel & Renovate ICE ROM meantime.......
Click to expand...
Click to collapse
Allready using arter but waiting for the full modding experience
EugenStanis said:
I asked the dev yesterday, and he said the work will be done, but they didnt started yet...
Click to expand...
Click to collapse
Which dev?
slapman said:
Hi went to download the Arter kernel file but there are quite a few which one is the recommended file to install?:confused
---------- Post added at 04:09 PM ---------- Previous post was at 04:04 PM ----------
Disregard I downloaded r54.
Click to expand...
Click to collapse
The latest stable version which is also compatible for OP7T Pro = r54
On this link here......
---------- Post added at 11:56 AM ---------- Previous post was at 11:52 AM ----------
jotha.dx said:
HI...
Installation ok with FKk, but to use the features of karnel arte97 he asks to format the partition / data for f2fs over Ext4 .... How to format without having twrp?
Click to expand...
Click to collapse
As per the OP of Arter kernel, I quote:
"/* f2fs */
OnePlus 7T and OnePlus 7T Pro users cannot use f2fs without involving heavy and risky repartitioning operations due to Dynamic Partitions."
You can still install & benefit from this fab kernel - the bump in battery life alone makes it worthwhile.
I'm using ElementalX.....
Perfect Battery saver!
Ok i install the Arter97-r54....
Thanks
Sent from my OnePlus7TPro using XDA Labs
jotha.dx said:
Ok i install the Arter97-r54....
Thanks
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Best choice in my opinion good battery and very fast and smooth...