After a long trial and error I found a rom for S7 Edge FD model Superman Rom though it is a bit old with July 2018 Security patch but it has most of the features like smart capture, private mode etc but then here comes the most annoying stupid Dual sim bar. I wanted to remove it did everything including googling scorching xda but to no end. Though I found these two posts partially helpful.
To add a Button(preferred) in setting to turn of that stupid piece of Sh*t
https://forum.xda-developers.com/showpost.php?p=76918617&postcount=276
To completely remove it
https://forum.xda-developers.com/showpost.php?p=76918617&postcount=276
Now the problem is I successfully decompiled modified but can't wrap my head around how to recompile it so I did everything from following every guide to trying to be creative but it is not helping tried almost 20 times . Also tried this help to recompile honestly can't understand it.
https://forum.xda-developers.com/showpost.php?p=76259533&postcount=40
So I did a bit more research and found that it is possible as it is included in Killsitch's BlackDiamondV4SamsungOneUI RomControl but no option in Supermanrom control even I tried pro version of that apk. Also tried to contact devs(busy people) no response.
So my request is can someone please do it for me.. Please :crying::crying:
Thanks in Advance..!
Excuse my poor English.
Here is the link to SystemUI.apk and framework-res.apk from Superman Rom.
https://www.mediafire.com/file/l4h77g67v1ns8o9/SupermanRom-SystemUI-%26-Fraework-res.zip/file
Related
I have installed and uninstalled adreas falke Weather database program v1.2 so many times it is ridiculous I have read EVERY thread I could find on how people solved there issues with this program and not one of the worked for me. Now when I try to reinstall the program and access it it says "File right protection could not be removed" this is after i cleared the storage and installed all my contacts and installed the .net version 3.5 for the third time this week. Someone on this forum told me to download the program and cancel in the middle and that would take care of the problem, NOPE. So before, my problem was I got my city on there and it always said the high and low were 32 degrees, now I can even get the program to work so I can add my city again. Can someone with more knowledge than me please help me with my frustrations, I feel like the weather tab on my phone is absolutely useless to me at this point and I hope there is someone who can help me thanks for reading. Please help
I had to install a 1.1 version that someone hacked. Get the modified cab at the bottom of the first post.
http://forum.xda-developers.com/showthread.php?t=408918
OK Now what do I do???????
I got the 1.1 modified version installed now when i add my city it is high and low of 32 all the time and when I hit update it goes from sunny to moon and cloudy each minute this in exactly how i put my city in maybe I am doing it wrong
United States
IL
DeKalb
NAM/US/DEKALB/IL
maybe that is wrong on accuweather there is a zipcode to so I am going to try it like that now thanks for the help with the program can you please help me with this now
I used my zip code as the accuweather code.
just your zip code????
Vuoala You are the man mtg1974 i never thought just the zipcode would work because every other thread you read says "you must enter the accuweather zipcode exactly the way it is in your URL" so I never even thought to just put my zipcode in that box you are a genius I wish there were some way to thank you like in other forums
I'm glad I was able to help. I can't take credit for the answer though. I found it here the other night when I was adding my town to my weather database.
http://forum.xda-developers.com/showthread.php?t=408918
3. bis For US cities :
- thx obender : for example Hickery, NC, Accuweather URL is http://www.accuweather.com/us/nc/hic...u=1&traveler=1
You see the portion "us/nc/hickory". To obtain the locCode, you have to prefix it with NAM|
So, it gives, for our example : NAM|US|<state>|<city> i.e. NAM|US|NC|HICKORY
- thx duofold : instead of the complete locCode as mentioned above, you can only use the zip code : just input the zip code of your city in the "Accu Weather Code" field (and, of course enter in a state & city in the other fields).
Hi guys! :victory:
I'm new around here, nice to meet you all. This is my first post and I wasn't exactly sure where to ask this so feel free to point me in the right direction if you have a better place.
I'm sure this question has been asked time and time again, so I understand if this comes off as annoying or redundant, but I need some serious help here.
I'd like to start off by saying that I have no knowledge of Android development further than installing ROMs and working with Xposed framework, so please bear with me here.
I need to disguise an app. I have an APK file, and I would like to change the name and the icon, and if possible, somehow lock it. I tried using Hide it Pro, but it refused to actually lock the app. I need this done ASAP, and I'm willing to do all the research and work on my own, I just need pointed in the right direction. I made it so far as changing the icon and name using an APK editor, however I could not log into the app afterwards, and the icon changed itself back to the original.
Any ideas?
Thanks!
-Ryder
Quick edit here: This APK isn't for me, it is for my boyfriend, so I would need to test it and send it to him, and see if it works on his side.
Hey guys, one of my coworkers got an insignia flex 10.1 tablet model number nsp10a7100. It had the annoying frp block on it so she couldnt get it setup. I did some searching and came across a couple of methods to bypass or remove it, yet none have worked. I tried the quick shortcut app and logged in with a different account..it starts to set up then a popup comes up that says something about an original owners account and to log in...
There was another method I saw on here where somebody had posted a file to run. https://www.google.com/url?sa=i&sou...aw2-HcZRG_KRlpMp9Qp0k5TV&ust=1547051216987032
I got the file on the tablet and enabled install from unknown sources but it just says cant open file...
On all of the YouTube videos the quick shortcut method worked flawlessly but not for me..not sure what I did wrong.
Any help mb is greatly appreciated. I understand why they have the frp block but its a bit ridiculous...
Thanks!
Nobody?
PsilliCoder said:
Nobody?
Click to expand...
Click to collapse
Hola. No , no I'm sorry these are pretty much dead devices. I'd assume lot has to do with them being only around 80 bucks new and Google has ironed out almost all glitches in the setup process to get past FRP. i also have one but it's looking like a parts device . I found mine fairly recently but found out quickly it was a large paperweight , I'll keep it around a bit longer and see what I can make of it but I do believe I've already run through the gamut of workarounds. Sorry again , - b.p
So I want to try customizing a rom for my g925, but all the information I can find is outdated and abandoned or specific to a certain device or incomplete. I'm sure it's out there somewhere, but I just don't know what to look for.
I think the best way is using a kitchen based on what I've read so far, so is there one that works for s6 and s6 edge and works on windows? I've never dealt with linux, so I'd rather not have to start there. Cygwin is what I'd need right?
Somewhat related, (my g925f 32gb is gonna be replaced by a g925t 128gb once I figure all this out) there's a bunch of videos on youtube (with links to download the file) to convert a g925t to g925f. These work fine, but still come with bloatware, so I'd like to make it myself. I found only one thread that doesn't work anymore because the basebands don't match or something.
Do I need a ton of space and time to build from source, or can I just modify the tar.md5 contents?
If anyone could help or point me in the right direction, I'd be really grateful!
Mmm. Somehow in all of my searches, I never found chef central. Now I've gotten somewhere. Should be able to narrow down my broad questions now.
Been using ASSAYYED Kitchen with great results. Got the stock MM rom totally debloated and updated some apps to the version I prefer!
Now I need to figure out how to disable the volume warning. I found this thread but it seems to be outdated for MM on the s6 edge. Still might be there hiding in the 1100+ pages of comments.
Also need to figure out how to make bootanimation.qmg's and such now that samsung's theme maker has been turned into a license application. I still have a few alternatives to look into like katkit or themeDIY. Bet I could probably find the old theme designer program floating around archive.org or elsewhere too.
Also need to bundle themes with the rom.
So I figured out how to disable the safe volume warning on 6.0.1 finally. Found this post, so I added
Code:
audio.safemedia.bypass=true
on its own line in build.prop at the end of the ADDITIONAL_BUILD_PROPERTIES section. Nice thing is it still leaves the little red zone in case I ever use the stock earbuds again, heh.
Now off to adding a new kernel and themes and bootanimations.
Hi guys. Not sure if I'm in the right sub but I'm desperate for help.
I've had a Lenovo smart display 8 and it was working okay before. I did not use it for some time until I moved back to my country lately.
I tried to set it up and it seemed to update to the latest firmware. Voice works but I noticed that the screen isn't responsive. Thinking that something was wrong, I tried to reboot the device but it didn't get any better, so I tried resetting by holding +/- buttons. It went through the setup process again but now at the final step, it won't go any further. It looks like a bug that has disabled the touch screen imo. I've searched and found a lot of people having the same issue with not just lenovo but also nest hub. Do anyone have an idea how we can flash an older firmware to fix this?? (I'm not in the US btw, so I can't send it to service center. And the device isn't distributed in my country so I doubt whether local support could help. I don't want it to become a paperweight) It gets even more frustrating that the device is connected to wifi network and can receive audio cast, even youtube cast but the screen will only show Almost done! Finish setup.
I've tried to collect resources across the internet. There is open-source from lenovo website. File in tar.gz and I don't know how to compile it into an img file for flashing. There is another thread when someone posted a system dump in another thread, but it's not active. I wonder which one to use and further steps to make it work. Can anyone with expertise help me, please??
This is from Lenovo site
https://smartsupport.lenovo.com/vn/...-home/lenovo-smart-display/downloads/ds504927The other topic post
Smart Display System Dump or APK
Hey, guys - I've been scouring everywhere whether anyone has been able to perform a system dump of a Smart Display device. Since the Home Hub is using Cast as its method of being display I'm almost positive it won't be able to be engineered on...
forum.xda-developers.com
Thank you for reading and thank you more if you could drop me some support<3<3
ANyone??