It really works!! I just have installed it myself!! I've attached some photos and screenshots of my LG G6 H870S!
Caution: I won't be liable for any damage done by not following the process properly! Proceed with your own risk!
You need to download and install LGUP with Uppercut. I'll describe the process below:
Download LGUP Tool with UPPERCUT
LGUP Tool v1.14.3: LGUP_Store_Frame_Ver_1_14_3.msi
UPPERCUT v1.0.0.0: UPPERCUT_1.0.0.0.zip
How to Install LGUP Tool with UPPERCUT?
First install ‘LGUP_Store_Frame_Ver_1_14_3.msi’ file then extract the Uppercut zip and double-click on the ‘UPPERCUT_1.0.0.0.exe’ file to launch the LGUP Tool!
A Small Step-By-Step Instruction:
First save everything important from the phone to the cloud / to the SD card / to the computer. Then check your phone's model & software version. You need to be absolutely sure that your phone's model is LGH870S and your software version is V20o. If your software version is not V20o then you need to install the V20o KDZ first using LGUP.
Go to Download Mode and select H870S20o_00_OPEN_AME_DS_OP_0802.kdz from LGUP. Select Refurbish and start the installation. After completion your phone should be running with the software version V20o! Now you can proceed with installing Android Pie Beta on your phone!
Connect the phone with PC and select MTP (data transfer) Mode then select FOTA Upgrade in LGUP then finally select LGH870SAT-V20o-to-V29a-AME.up and click to start.
Patiently wait for few mins, Voila! Your phone is now running on Android Pie Beta!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Md Ashifur Rahman said:
It really works!! I just have installed it myself!! I've attached some photos and screenshots of my G6
Click to expand...
Click to collapse
I m having h870s please tell me about bugs, response and battery performance.
Will i be able to downgrade if i didnt like it as it is beta version.
Does it wipes data?
If your phone is already running on V20o then it wouldn't wipe your data.
tyler78 said:
Does it wipes data?
Click to expand...
Click to collapse
If your phone is already running on V20o then it wouldn't wipe your data.
junejo46726 said:
I m having h870s please tell me about bugs, response and battery performance.
Will i be able to downgrade if i didnt like it as it is beta version.
Click to expand...
Click to collapse
I can't say about bugs right now as I just have installed it yesterday. But so far I'm loving it! The UI has changed a lot, it looks much smarter and better! The battery performance has dramatically improved! Overall I'm thankful to myself that I've updated it to Android Pie! ?
Windows 10 Defender says Uppercut is a trojan.
Edit: Turns out it's normal. You have to disable your av before running uppercut.
Edit2: It works. I'm running pie on my 870s right now. Thank you so much.
Any news when can be a final version of Pie for H870S?
Im using pie one my H870S about 3 weeks its totally better than Oreo ... Smarter faster and more performance im w8ing for final release
How can I downgrade to Oreo if I need to? Also, when stable version of Pie 9.0 becomes available, how can I switch from beta?
EDIT:
I have to enable USB debugging to start flash process. Please add this part to firts post.
After factory reset my Wifi is not working anymore. Don't do factory reset people.
How can I revert back to Oreo?
My wifi is not working like before. It is very slow and it keeps losing connection. How to flash Oreo back?
Windforce0511 said:
My wifi is not working like before. It is very slow and it keeps losing connection. How to flash Oreo back?
Click to expand...
Click to collapse
But wifi is working before and after on my phone even i have reset my phone.
Idk why u have this problems but after 3 weeks using of pie beta i say that is better than oreo i have not any bug there are small bugs they come from oreo but they are not important and i dont care them i did factory reset and wifi is working now w8ing for final pie version
Thank You
Teşekkürler deneyeceğim :good::iyi:
My Experience after this update
1. Phone is slower but not noticeble to average person.
2. Keyboard buttons has no round corners.
3. Auto rotation some times fail.
4. Little bit battery consumes more than oreo
5. No choice to downgrade otherwise brick
6. No night mode
7. Battery statics are not accurate
8. No imrovement in camera department
9. Gesture based navigation is gimick
10. Boot and restart time are longer than oreo
11. More RAM is occupied than oreo
Overall review is that before final build stay on oreo
Hmm after day or two phone gets much smoother. Also it is much better in terms of temperatures. No more overheating. Battery is not that great, but we will see after few full charging/discharging cicles.
But best thing for me is how Google camera now operates. Hdr plus enhanced was really slow on Oreo and phone was overheating after taking few pictures.
Now even night sight is very fast and no more lag in GCam port (latest version for 8.0+ android). Also there is much less purple tint during night time photos.
Windforce0511 said:
Hmm after day or two phone gets much smoother. Also it is much better in terms of temperatures. No more overheating. Battery is not that great, but we will see after few full charging/discharging cicles.
But best thing for me is how Google camera now operates. Hdr plus enhanced was really slow on Oreo and phone was overheating after taking few pictures.
Now even night sight is very fast and no more lag in GCam port (latest version for 8.0+ android). Also there is much less purple tint during night time photos.
Click to expand...
Click to collapse
Which port is that? Could you give me a link?
tyler78 said:
Which port is that? Could you give me a link?
Click to expand...
Click to collapse
Sure
Gcam_6.1.021_Advanced_V1.7.190716.1800.apk
https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.1.021_Advanced_V1.7.190716.1800.apk
You have to load config file for G6 and after that colors will be on point :good:
Windforce0511 said:
You have to load config file for G6 and after that colors will be on point :good:
Click to expand...
Click to collapse
Were can I get the config file for the G6? Also, do you know if there's any ported version that supports the wide angle lens?
Thanks
Related
Wow. If this is real, Sprint could become the first in US to release the 7.0 update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-- SOURCE
The info given at source (link above) looks quite valid:
- No CM14/AOSP 7.0 ROM availabel for G930P, so it must be official firmware in use here.
- RAM is down, and so are the benchmark scores, so this is a test build, not a fake 6.0 one.
What do you guys think?
itskapil said:
Wow. If this is real, Sprint could become the first in US to release the 7.0 update.
-- SOURCE
The info given at source (link above) looks quite valid:
- No CM14/AOSP 7.0 ROM availabel for G930P, so it must be official firmware in use here.
- RAM is down, and so are the benchmark scores, so this is a test build, not a fake 6.0 one.
What do you guys think?
Click to expand...
Click to collapse
where is the test here?
itskapil said:
Wow. If this is real, Sprint could become the first in US to release the 7.0 update.
-- SOURCE
The info given at source (link above) looks quite valid:
- No CM14/AOSP 7.0 ROM availabel for G930P, so it must be official firmware in use here.
- RAM is down, and so are the benchmark scores, so this is a test build, not a fake 6.0 one.
What do you guys think?
Click to expand...
Click to collapse
It is real, I have the update on my phone. You can get it by resgistering for the beta through the galaxy beta app from the galaxy app store.
I can confirm, for I have it as well. Very nice update. Do NOT let the benchmarks thwart you...it is faster.
itskapil said:
Wow. If this is real, Sprint could become the first in US to release the 7.0 update.
-- SOURCE
The info given at source (link above) looks quite valid:
- No CM14/AOSP 7.0 ROM availabel for G930P, so it must be official firmware in use here.
- RAM is down, and so are the benchmark scores, so this is a test build, not a fake 6.0 one.
What do you guys think?
Click to expand...
Click to collapse
I second what @AarSyl said, also, it's benchmark scores aren't that much lower.
I am registered on the beta program. Do I need to do anything else or will the update just load onto the phone. When I go to settings in the app there is no update option to pick
cwb1231 said:
I am registered on the beta program. Do I need to do anything else or will the update just load onto the phone. When I go to settings in the app there is no update option to pick
Click to expand...
Click to collapse
Just wait and keep going into settings, system updates, and keep checking manually for the update, it took mine from last night to early this morning, or about 14 hours.
Do you mean settings on the phone or within the app? . Sorry
---------- Post added at 10:36 PM ---------- Previous post was at 10:29 PM ----------
NM got it
No more room any other way to retrieve it?
Sent from my SM-G930P using XDA-Developers mobile app
I'm testing Nougat right now, officially from Samsung via beta program. I have to say as of right , few hours of using it, it's pretty solid. If anyone has any questions about 7.0, feel free to ask.
Did anyone get the official Nougat update on this model number SM-G930P yet?
I thought beta users get's it first, isn't it true?
sushant_1727 said:
Did anyone get the official Nougat update on this model number SM-G930P yet?
I thought beta users get's it first, isn't it true?
Click to expand...
Click to collapse
I have not gotten the official update yet. Still on the latest beta version.
Ditto. Been a while since we got another beta update. I am still not happy with the battery drain and the phone gets sluggish at times.
Imaginos said:
Ditto. Been a while since we got another beta update. I am still not happy with the battery drain and the phone gets sluggish at times.
Click to expand...
Click to collapse
Exactly my thoughts, battery drain, memory leaks, apps force closing. I'm so done with this. Waiting for the official update now.
I'm glad that I'm not the only one experiencing the extreme lag after a period of time. It's to the point that I must restart every day for the phone to be useable. My phone gets downright lethargic after a few minutes sometimes if I'm using navigation (doesn't matter which app).
The battery drain is irritating...but jot nearly as bad as the lag.
Hey guys when I go to restore back to a stock firmware (non beta) my s7 doesnt even show up in Odin while in download mode. I have all s7 drivers installed, it.just doesn't show up... help?
15jpenni said:
Hey guys when I go to restore back to a stock firmware (non beta) my s7 doesnt even show up in Odin while in download mode. I have all s7 drivers installed, it.just doesn't show up... help?
Click to expand...
Click to collapse
Have you tried another USB cable or USB port? Also, reinstall the drivers
Sent from my SM-G930U using XDA-Developers Legacy app
sushant_1727 said:
Did anyone get the official Nougat update on this model number SM-G930P yet?
I thought beta users get's it first, isn't it true?
Click to expand...
Click to collapse
Got my Nougat update on Sprint G930P device but it is only 161.21 MB in size. Is it because I'm a beta user and I'd an Beta Version Android N ?
S/W V : G930P PVPU 4BQAA
Yes beta users got official update
Sent from my SM-G930P using XDA-Developers Legacy app
Update
Sent from my SM-G930P using XDA-Developers Legacy app
(7.1) Flyme7. Fingerprint infrared V3 For the Leeco X720 and X727 ( Updated on 9/5/2018 )
AKA: The newest version of Flyme Original Chinese Name : 7to-X720.flyme7.指纹红外V3.zip
Developer: Cold and Ruthless
Original Link: http://rom.7to.cn/romdetail/1030273
Link: https://mega.nz/#F!xYJgXYxK
Key: !QNUTt-aMXA-Kvl39hOMp9A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme:
LeTV pro3 transplant Flyme7.8.21R V3
Redesigned interface, better overall experience
Advanced settings root card brush package
Optimized sound
Author: Cold ruthless
Release Date: 2018-09-04
Android version: 7.1.x
UI type: Flyme ROM
Size: 1270.00MB
Experience the new interface, with advanced settings, high speed, theming options, and excellent call and sound quality, all are hallmarks of the Meizu Official Experience
Applicable models: LeEco LEX720, LEX727
Optimization of the optimized
volume of the bottom package update sound.
Temperature control based on port from: Charm Blue Note 6 Build
Double Wipe> reboot to Recovery, if you have an error you may need to format storage
The first boot is very slow, please wait for the Meizu official latest experience version transplant
Past Bluetooth issue resolved.
Optimization scheduling
New interface new experience, advanced settings and optimization
Installation Notes:
First Boot may be slow, so if it takes a while for the first system boot, the solution is just to wait longer.
Flyme Account http://forum.flymeos.com/
Create an Official Flyme account if you want to gain access to tons of addons.
Meizu is Port friendly and Flyme Account Provides:
Forum advice
Plugins,
Apps,
3rd party themes etc.
Download Flyme 7 Launcher, Stock Wallpapers, and Apps (Flyme 7 stock APK)
https://www.androidsage.com/2018/05/15/download-flyme-7-launcher-stock-wallpapers-apps-apk/
As always, flash anything under your own discretion
Root
This Rom comes with Magisk root, You can easily flash Magisk 17.1 overtop after setting up the system and then rebooting to recovery.
Gapps: I am using BeansGapps-Mini-7.1.x-20170725.zip
Helpful files:
https://mega.nz/#F!JMYSSCLQ
Key: !xgQFTB69PE-hL8RTUbpUIw
Firmware
https://mega.nz/#F!oAZ3yC4b!
Key: MDwbHXNTRdrpgMvQ42yviw
If you have safetynet issues, follow the steps below
Extract the boot.img file from the rom, and placed the boot image into storage.
Open Magisk and use install to Patch Magisk to the boot.img.
Reboot to recovery, install the patched boot.img to boot
Flash addonsu-15.1-arm-signed.zip, and then reflash Magisk again, from storage then use advanced options to clear cache, and then reboot to system.
With these steps you will always Pass Safetynet and be playstore certified
https://forum.xda-developers.com/showpost.php?p=77367331&postcount=4790
Build Prop Recommendations
After the installation and initial testing period,. you may decide to continuing using Flyme for a while:
If so you can further optimise the ROM with these build prop and edits posted below.
First backup your existing buildprop
* ro.product.locale.language = en ( or your language)
* ro.product.locale.region = IN or your country
* persist.sys.timezone = your country ( see proper entry here: https://gist.github.com/arpit/1035596)
* persist.sys.meizu.region =
or use persist.sys.oem.region= your country google correct acronym for your country
Reserved for future hints
Thanks I will try and feedback
i get error code 3 when i try to flash
rob_z11 said:
i get error code 3 when i try to flash
Click to expand...
Click to collapse
Me Too!
Yes, I tried it and the same thing happened to me, it must be a corrupt download because people are giving the release a 8.3/10. I found a slightly older but highly rated rogue pig version. ( see same link above)
I installed it successfully and must say, it's actually extremely good.
Corruption
The original newer file is probably just corrupted so I am going to try redownloading it. Until then, check out the other version that I placed in the same megadrive folder see the link above. Yes, it's a little older but its actually awesome!
I just attempted to find the newer rom by cold ruthless on the BBS website, has he been banned. I had a bookmark saved and when I click I get this message " Authors are banned or deleted automatically blocked" Not sure if its the same person or not, if this next download is corrupt. I would still recommend flyme_LEX720_rogue_6.8.3.17R-beta, I am testing it right now and like it alot.
Does Android Pay work with this ROM?
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
It looks like what happened to me when going from an Oreo rom to Nougat, you have to format data not only wipe data. Format data, write "yes" and then install the rom. Always have a backup of your data before.
flyme is one of the best system , the official one is good but it's old , be sure to have eui firmware before flashing flyme .
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Please can you put the link of old recovery version
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Did you format internal storage?
3llawi said:
Did you format internal storage?
Click to expand...
Click to collapse
No because I have always been on miui10
can some1 link me the gapps?
collisiion said:
can some1 link me the gapps?
Click to expand...
Click to collapse
Look at the post #1
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
andrew2401 said:
Does Android Pay work with this ROM?
Click to expand...
Click to collapse
I believe so, though I haven't tried it yet. I will let you know late tonight
tsongming said:
I believe so, though I haven't tried it yet. I will let you know late tonight
Click to expand...
Click to collapse
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
tsongming said:
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
Click to expand...
Click to collapse
Ok, this is what I have found. Your original latest flyme seems to be working ok. Here is what I have done. Using RAR apk, I unzipped it, and it complained about one apk in mizu-apk folder, and I ended up removing that folder completely, and zipped the ROM again. It flashed without any issue, but I can't seem to get Data to turn-on. It turns on briefly during the boot, but it goes away. I think if I compare the build.prop from older version with newer version, I may be able to find the fix.
andrew2401 said:
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
Click to expand...
Click to collapse
Extremely good, at the moment my phone has no OS at all..
I only glanced at battery life briefly yesterday with Gsam battery tool. Plus, I installed BlackScreen 5.3 r2 which worked fine, I would rather wait for a real answer. Otherwise it would just be a guess.
Its out in the wild now, check it out...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good day to all.
a few thoughts...
Let's start with the possibilities: the camera works after the upgrade(removed userdata.sin), I don't know how.
Here is another image of the details:
Here are few others:
That is all I have for now. Root is offline. Camera surprisingly works, again, I don't know how but it does.
have a nice one.
for G8341 when
dcrin3 said:
Root is offline. Camera surprisingly works, again, I don't know how but it does.
Click to expand...
Click to collapse
Does Magisk work with the firmware and did u unlock bootloader?
And both sims work?
dcrin3 said:
...That is all I have for now. Root is offline. Camera surprisingly works, again, I don't know how but it does...
Click to expand...
Click to collapse
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
lamtrinhan1503 said:
Does Magisk work with the firmware and did u unlock bootloader?
Click to expand...
Click to collapse
Delete post.
lamtrinhan1503 said:
Does Magisk work with the firmware and did u unlock bootloader?
Click to expand...
Click to collapse
Did not check on magisk but bootloader is unlocked.
pergoteborg said:
And both sims work?
Click to expand...
Click to collapse
Both Sims appear online but never tested calls or messages. If I get time, I'll check on it.
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
Click to expand...
Click to collapse
I'll will check on this later.
dcrin3 said:
I'll will check on this later.
Click to expand...
Click to collapse
Modpunks twrp-3.2.3-0-poplar-1.img does not decrypt the PIE relase, have to ADB Sideload
I wrote how I got PIE with Magisk at https://forum.xda-developers.com/showpost.php?p=78141162&postcount=160 in the Android 9 Pie comes to Sony Xperia XZ1 on October 26 thread
pergoteborg said:
Modpunks twrp-3.2.3-0-poplar-1.img does not decrypt the PIE relase, have to ADB Sideload
I wrote how I got PIE with Magisk at https://forum.xda-developers.com/showpost.php?p=78141162&postcount=160 in the Android 9 Pie comes to Sony Xperia XZ1 on October 26 thread
Click to expand...
Click to collapse
Both sims work for phone calls and sms.
I also like the dry erase swipe unlock, it leaves a minor trail behind instead of showing the entire trace. Not sure if that's a PIE upgrade or not.
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Click to expand...
Click to collapse
Playstore->Settings->"Device is not certified"
Your latest recovery9cryptfs15-1omni8-1 successfully decrypts Pie update using swipe.
modpunk's latest sees scrambled folders, taking down swipe and device protection does not help either, it's all still encrypted(scrambled).
Here are the shots:
Have a nice one.
it keeps on coming.
I've got full root after flashing latest Magisk via @oF2pks recovery.
Now it's almost a full daily driver.
I noticed Netflix was crashing but I've removed it via Settings->Apps->Force Stop then Uninstall.
Went back to PlayStore and reinstalled it and now Netflix works.
Here are the images:
Good day/night!
unbelievable!
I decided to flash G8342_Customized VN_1310-7041_47.2.A.0.306_R3C again, this time with userdata*.sin in place. No files removed.
** FULL ABSOLUTE WIPE **
** watch out for the broken links, not sure what happened but the images load up when links are clicked/touched **
Guess what? There is no need for drmfix, no green images either. HDR is there too, though I doubt its potential.
See for yourself:
Root works after flashing latest stable Magisk. Got Magisk.apk from the original thread here on xda @topjohnwu (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and downloaded a flashable.zip from within it, using @oF2pks latest pie-able recovery(https://androidfilehost.com/?fid=11410963190603845086) , I flashed it.
and then the final miscellaneous images before I restore to Oreo
Alright, now there's more information available from the last 3 posts.
Thanks to @oF2pks @topjohnwu @janjan @IgorEisberg @munjeni
Have a good one everyone!
I have it rooted with magisk too, installed the magisk selinux script that I had from 8.0 FIX/MOD THE Was.. I am not sure that is needed, but Apple music would not start.
As would some other apps.
The apple music I eventually fixes by going back to a version from apk mirror of begining this year... And block it from updating
Also had problems with firefox, had to go back to a version 61.0.2 from my titanium backup instead of the 63 version.
Maybe it has to do with the swift installer (theming), I am not sure, that one also works mostly.
N7 player was buggy from backup, New install did not find all my playlists, but restored again from backup and gebuild media library seems to have fixed it.
Gmail I had a problem with too, tried to remove it and get aan older version too, I am not sure of that did it
So there can be some app problems still
I had also error messages flashing the rom from flashtool, so it did not flash, but fixed it with copying and renaming the fsc file to 47.2.fsc made it work (and reinstalling flashtool but i think the fsc file was the solution)
The clock is on the left now, I hope someone finds a way to get it to the right again, or turn it off...
dcrin3 said:
There is no need for drmfix but camera is limited to 17MP, no green images either.
Click to expand...
Click to collapse
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
arslancn said:
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
Click to expand...
Click to collapse
4:3 19MP It works . It work very good.
I can not attach a picture.
arslancn said:
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
Click to expand...
Click to collapse
On the original shots it was an upgrade without wiping data.
On the later shots, the thread reads that I did a full wipe without drm fix so stock install defaulted to 17MP.
-------Dec 8------
I just noticed the 19MP. Sorry @arslancn
dcrin3 said:
On the original shots it was an upgrade without wiping data.
On the later shots, the thread reads that I did a full wipe without drm fix so stock install defaulted to 17MP.
Click to expand...
Click to collapse
Hi, can you share a step by step tutorial to install magisk on Android 9?
Like this thread?
https://forum.xda-developers.com/xperia-xz1/how-to/guide-how-to-persistant-root-xperia-xz1-t3718375
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
Click to expand...
Click to collapse
Will this recovery work for xz1 compact?
[ROM][SM-T580/5][UNOFFICIAL][PixelExperience][9.0][64-Bit] -> 20190916 (DISCONTINUED)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience
DISCONTINUED
Pls find the last downloads here ..
https://androidfilehost.com/?w=files&flid=289289
https://androidfilehost.com/?w=files&flid=289291
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Pixel Experience - Plus
PixelExperience_Plus_gtaxlwifi-9.0-20190916-1148-UNOFFICIAL.zip
PixelExperience_Plus_gtaxllte-9.0-20190916-1409-UNOFFICIAL.zip
Pixel Experience
PixelExperience_gtaxlwifi-9.0-20190206-1143-UNOFFICIAL.zip
PixelExperience_gtaxllte-9.0-20190206-1435-UNOFFICIAL.zip
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data !
3. Install ROM.zip
4. install Magisk.zip
5. Reboot into system
- This ROM does include Gapps already !
TWRP:
Based on OMNI sources ..
twrp-3.3.1-1-gtaxlwifi-OMNI6 / twrp-3.3.1-1-gtaxllte-OMNI6
https://drive.google.com/drive/folders/1H3-CU3p-mGf0b_oQ69wirVcgd-okF-ps
SOURCES:
I have added manifest as well .. to be able to build future builds yourself.
https://github.com/followmsi/manifests/tree/gtaxl-pixel-pie
https://github.com/followmsi/android_device_samsung_gtaxlwifi/tree/pixel-pie_64-bsp
https://github.com/followmsi/android_device_samsung_gtaxllte/tree/los-16.0_64-bsp
Thanks to @cschsz for all the kernel security updates !
Big thanks to @Valera1978 for all his work !
Enjoy
Another Android "flavor" for 580/585 .. Pixel Experience
No worries .. except for RR Pie there are no more additional ROMs in the pipeline
Cheers
OMG. COOL. I was thinking of making one myself, but you already made one. Saves me the trouble ?
Wanting to try this out, but not sure about two things. In the Drive folder, there is a Pie/Oreo kernel as well as a different version of twrp from what I'm using. Is it necessary to install both of these along with this rom? Thanks
I know this could seem unnecessary but please put each type of rom into different folders. It is starting to become a mess to find the right rom.
Hmmm, this rom is reporting as a Xiaomi MI6 phone. Technically not a big deal, but figured I point it out. Also, switching to the front facing camera causing the camera app to crash. Going to the app section in setting and clearing data for the camera app fixes the crashing, but will popup again if you switch to the front facing camera again.
This one could be me, but flashing Magisk causing two apps to show up. One more thing, the app icons don't "look" right, they seem to look round but are cut off at the edges.
rev79 said:
Wanting to try this out, but not sure about two things. In the Drive folder, there is a Pie/Oreo kernel as well as a different version of twrp from what I'm using. Is it necessary to install both of these along with this rom? Thanks
Click to expand...
Click to collapse
If your current twrp works fine you do not need anything else ..
Just follow the instructions ..
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data !
3. Install ROM.zip
4. install Magisk.zip
5. Reboot into system
Cheers
-Maverick- said:
Hmmm, this rom is reporting as a Xiaomi MI6 phone. Technically not a big deal, but figured I point it out. Also, switching to the front facing camera causing the camera app to crash. Going to the app section in setting and clearing data for the camera app fixes the crashing, but will popup again if you switch to the front facing camera again.
This one could be me, but flashing Magisk causing two apps to show up. One more thing, the app icons don't "look" right, they seem to look round but are cut off at the edges.
Click to expand...
Click to collapse
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
paulo boë said:
OMG. COOL. I was thinking of making one myself, but you already made one. Saves me the trouble [emoji6]
Click to expand...
Click to collapse
You are welcome ..
Unlike to the upcoming RR Pie there are no regular builds planned for Pixel Experience.
If you plan building regular Pixel Experience ROMs .. Pls go ahead.
Cheers
followmsi said:
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
Click to expand...
Click to collapse
Just tried this rom. Camera works fine, using Open Camera app. I enabled the setting to use camera2 api in the app's settings first page. I started enabling it on all roms after noticing that it helps the flash to be in sync with the shutter on lineage 16 or crdroid rom. So maybe this setting helps the performance of camera in other ways also.
The gps was choppy at first, as usual for me (using T585) on pie roms. but after some idle time it stopped freezing the device and started getting a fix. So I hope the choppiness of the gps on pie roms is a one time thing after installing a new rom.
followmsi said:
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
Click to expand...
Click to collapse
The one that comes with the rom. Back camera works fine, switching to the front camera causing the camera app to crash.
Great rom !! Thanks followmsi as usual for your hard work
Great job!
It's possible to wake up the device with the Home button and not only with the Power button?
AOSP Extended
followmsi said:
Another Android "flavor" for 580/585 .. Pixel Experience
No worries .. except for RR Pie there are no more additional ROMs in the pipeline
Cheers
Click to expand...
Click to collapse
How about AEX
ginopinotto said:
Great job!
It's possible to wake up the device with the Home button and not only with the Power button?
Click to expand...
Click to collapse
Home button in next ROM ..
Greenchain said:
How about AEX
Click to expand...
Click to collapse
Just build yourself
Thanks for adding Home button to wake up the devices in the next build.
Cast screen doesn't work in this build.
There will be a future update of this ROM? At least add the Home button to wake up the devices
Thanks
ginopinotto said:
There will be a future update of this ROM? At least add the Home button to wake up the devices
Thanks
Click to expand...
Click to collapse
Yes .. at least one more build to fix home button.
But next month only .. including Feb security updates.
Cheers
Pixel Experience .. the final ROM
PixelExperience_gtaxlwifi-9.0-20190206-1143-UNOFFICIAL.zip
PixelExperience_gtaxllte-9.0-20190206-1435-UNOFFICIAL.zip
Changes:
- Google security updates -> February 2019
- Changed overlays to (hopefully) fix wake up with HomeButton -> needs testing
Pls go ahead and start building regular PE builds for SM-T580/585.
I just don't have the time to make regular PE builds too.
It's still a nice option for our devices.
Enjoy
Im just sharing, im currently testing Plus version.
Pixel Experience 12 Renoir | OFFICIAL | Android 12 | Updated: 20220715
Instructions here and summary:
Unlock bootloader
Stock MIUI MANDATORY:
Included 13.0.4.0 firmware, so you don't need to flash it manually
(According to Xiaomi, all the fastboot roms are safe to upgrade and downgrade with xiaomi flash or console flash, also, if the rom dont have de fastboot file [e.g. fastboot.exe], you must to get it, maybe with sdk platform tools)
Into Fastboot (adb reboot fastboot or power off / reboot and press power + vol -)
fastboot flash vendor_boot this.img
fastboot flash boot recovery_file_from_rom_url.img
fastboot reboot recovery
Factory Reset, then Format data / factory reset
Return to Main and Apply update > ADB sideload
from pc terminal: adb sideload rom.zip
Back arrow in the top left of the screen, then “Reboot system now”
Enjoy
Latest buildJuly 15, 2022 19:44
MaintainersPatryk Zimnicki
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any idea why do we need to use the provided vendor_boot image? Since i have used the rom just flashing the system partition.
razor_1911 said:
Any idea why do we need to use the provided vendor_boot image? Since i have used the rom just flashing the system partition.
Click to expand...
Click to collapse
From the wiki
Warning: This platform requires the vendor boot partition to be flashed for recovery to work properly, the process to do so is described below.
Click to expand...
Click to collapse
Installed flawlessly in a jp versión, even the original base firmware was the jp not te eu provided and the ROM works fine, I notice some upgrade on bass from the speakers, It sounds awesome, I've nevea used Pixel roms so I dunno if Is normal to miss the autobrightness icon on settings panel, battery works pretty nice, alarms, sounds, vibrations, all works fine. Thanks to the dev.
Installed flawlessly also. But unfortunately, Wi-Fi did not work. After booting up, it hangs for quite long time searching for wi-fi networks until it quits and the wi-fi slider moves to the left. I chose to use carrier data to finish setting up my renoir phone, and then tried every trick possible to get wi-fi working, to no avail.
Then flashed DotOS... same story.
Had to go back to Xiaomi.EU rom.
maralvar71 said:
Installed flawlessly also. But unfortunately, Wi-Fi did not work. After booting up, it hangs for quite long time searching for wi-fi networks until it quits and the wi-fi slider moves to the left. I chose to use carrier data to finish setting up my renoir phone, and then tried every trick possible to get wi-fi working, to no avail.
Then flashed DotOS... same story.
Had to go back to Xiaomi.EU rom.
Click to expand...
Click to collapse
You need to flash V12.5.7.0.RKIEUXM Stable firmware before installing PE.
DanielTheHam said:
You need to flash V12.5.7.0.RKIEUXM Stable firmware before installing PE.
Click to expand...
Click to collapse
Can't do. I'm on stock renoir_global_images_V13.0.4.0.SKIMIXM_20220412, Miui13. I might brick the phone because of ARB.
What is ARB?
And i have question also about Magisk is it possible to be rooted?
maralvar71 said:
Can't do. I'm on stock renoir_global_images_V13.0.4.0.SKIMIXM_20220412, Miui13. I might brick the phone because of ARB.
Click to expand...
Click to collapse
If you're worried just flash stock V12.5.7.0 and start the installation process from there.
razor_1911 said:
And i have question also about Magisk is it possible to be rooted?
Click to expand...
Click to collapse
Maybe, just install TWRP and flash magisk
Steps and Link
I am on xiaomi.eu miui 13 version right now and I can't downgrade because my ARB is 1. Stock 12.5.7.0 EEA is ARB 0. Is there any fix to change that and downgrade without bricking my phone?
------------------
Nevermind. I just edit install script file.
I was on 13.0.4 global
Unlocked bootloader
Installed 12.5.7 full stock
After that all by instructions
All went smoothly no problems
So far works fine, thanks allot
Found a bug, after a while maybe like a 5-6 days, the phones does not ring or vibrate when ringing. After a restart is the same again, probably that vendor image is broken.
How is the SoT / battery? Better than miui or similar?
Personally, I installed it 1 week ago, and at first glance, everything worked flawlessly.
I was actually amazed of how good it worked! Until..
I realised the battery was.. TERRIBLE.
The battery don't lasts a lot, and for some reason, when i don't use my phone (sleep mode + airplane mode), It uses 20-30% for.. nothing.
I'm probably going to switch to LineageOS.
razor_1911 said:
And i have question also about Magisk is it possible to be rooted?
Click to expand...
Click to collapse
It indeed can be rooted, personally to root it i used a tool to get all the .imgs of the ROM, and patch it, then reflash.
If you are scared about that, TWRP should work just fine too.
Lolo280374 said:
It indeed can be rooted, personally to root it i used a tool to get all the .imgs of the ROM, and patch it, then reflash.
If you are scared about that, TWRP should work just fine too.
Click to expand...
Click to collapse
yeah i rooted it by the provided boot image in magisk, thanks.
Lolo280374 said:
Personally, I installed it 1 week ago, and at first glance, everything worked flawlessly.
I was actually amazed of how good it worked! Until..
I realised the battery was.. TERRIBLE.
The battery don't lasts a lot, and for some reason, when i don't use my phone (sleep mode + airplane mode), It uses 20-30% for.. nothing.
I'm probably going to switch to LineageOS.
Click to expand...
Click to collapse
Same here, but I do this after flash a new rom and battery drain ok
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
I used to 13.0.4 global rom
Installation complete according to the guide
but recieved phone number is two number overlap
Had to go back to global rom