Hi
I tried to flash bootlegger rom,Gapps-arm64 super ,Magisk. but now i am struck in TWRP as it says there is no OS installed.
Tried push Oxygen OS from mount.....not happened. Tried to adb sildeload also not happening as it was stuck in TWRP and command prompt give up long list of 163 comments.......
Please help how to install the bootlegger rom or oxygen os
Device struck in TWRP mode.
Devices: one plus 5
Rooted
TWRP- 3.3.0.1
Bootloader unlocked
Related
Hello!
This is my first post. I've searched for hours. Visited over 200 sites and forums tried multiple things installed all available android tools you can find online and i am seriously stuck.
Setup before problem : One Plus X - Cm13 - Version 2016 - Oct - 10. This is updated from the cyanogen website and its treated as the stable version.
Downloaded the latest version which is the 15th and got stuck at bootloop. After some searching i discovered that i had to updated my bootloader as it was the same since November 2015. In the website that i got the new version i was also given the new TWRP version 3.0.2 . So i went into my recovery flashed the new bootloader , then the TWRP , then the new ROM. Mobile boots up shows completly empty fresh install CM 13 without gapps or any of my previously installed programs. Everything is still in the storage. All installation folders from the various programms i had.
My recovery mode refuses to Boot. It just stays on the one plus logo. Tried TWRP manager from the OS but the old version 2.8.7.0 refuses to be unistalled. Adb command lines : I've been trying on windows 10 , 8 , 7 with the appropriate drivers and the only thing that i can make the phone do is go to either FASTBOOT or normal boot. Flashed the TWRP multiple times and no changes what so ever. I can make the mobile show up with ADB device, Fastboot device it shows success and when i try to boot into recovery it just gets stuck. I also got the MTP package from Windows. Basically i bricked my phone within a glass. OS works but Recovery not. Fastboot is supposignly working but i see no changes.
Thank you in advance!
Install original stock recovery then 2.2.3. If you want to use ashwins cm13,cm14 from here on out and a couple other ROMs required updated bootloader. You achieve this by flashing 3.1.3 Oxygen OS. After you updated your bootloader only twrp you can use is blusparks latest v41 or Nichets twrp. On a side note 2.8.7 twrp is old 3.0.2 is latest.
Exodusche said:
Install original stock recovery then 2.2.3. If you want to use ashwins cm13,cm14 from here on out and a couple other ROMs required updated bootloader. You achieve this by flashing 3.1.3 Oxygen OS. After you updated your bootloader only twrp you can use is blusparks latest v41 or Nichets twrp. On a side note 2.8.7 twrp is old 3.0.2 is latest.
Click to expand...
Click to collapse
Thank you i managed yesterday from a program to flash twrp as kernel and was rebooted into a working twrp and fixed everything from there.
Hi,
I was trying to install LineageOS 14.1 Android 7.1.2 Nougat ROM on my Infinix Zero 5 after installing TWRP and Magisk. However, after successful installation of Custom ROM when I reboot my phone it always goes into TWRP recovery. I tried all the options like PowerOff, Reboot, Recovery Reboot and Bootloader reboot but it always goes into TWRP screen. From TWRP I can see OS folder structure is there but phone is only booting into TWRP. Any help will be appreciated.
Regards,
Vjay
Try cmd="fastboot continue" from fast boot.
Hello!
Just received my Umidigi A3 - MT6739.
Firmware is Android 9, latest release: N Android 9.0 V1.3_20190610 ROM
I would like to flash a custom recovery (TWRP) and flash a custom ROM - like Lineage OS or Stock Android.
This is not the first time I root and flash an android device, however I am having difficulties finding the right files.
I tried to install custom TWRP recovery both through ADB tool and with SP flash tool.
I initially unlocked the OEM and bootloader using ADB tools, then I tried to flash a TWRP recovery image I found online but it turned out to be for Android 8.1 and not Android 9.
The phone switches on and boots normally - however I still don't have a custom recovery nor the possibility to install a custom ROM.
Here's a list of threads I already looked at and tested:
community.umidigi.com/forum.php?mod=viewthread&tid=2962&highlight=twrp
getdroidtips.com/twrp-recovery-umidigi-a3/
unofficialtwrp.com/twrp-recovery-root-umidigi-a3/#Download_Files
romprovider.com/2019/01/umidigi-a3-twrp-root/#How_to_Install_twrp_Recovery_on_UMIDIGI_A3
Did anyone who has the same phone manage to do such?
Thanks!
A3 TWRP Recovery
Hi,
It sounds like you have tried all the available options and since I have Android 8.1 mine is not the same. I can tell you that just in case you haven't seen this page yet, it may help, as it worked perfectly for me.
community.umidigi.com/forum.php?mod=viewthread&tid=17376&extra=page%3D1
David
ccampolo said:
Hello!
Just received my Umidigi A3 - MT6739.
Firmware is Android 9, latest release: N Android 9.0 V1.3_20190610 ROM
I would like to flash a custom recovery (TWRP) and flash a custom ROM - like Lineage OS or Stock Android.
This is not the first time I root and flash an android device, however I am having difficulties finding the right files.
I tried to install custom TWRP recovery both through ADB tool and with SP flash tool.
I initially unlocked the OEM and bootloader using ADB tools, then I tried to flash a TWRP recovery image I found online but it turned out to be for Android 8.1 and not Android 9.
The phone switches on and boots normally - however I still don't have a custom recovery nor the possibility to install a custom ROM.
Here's a list of threads I already looked at and tested:
community.umidigi.com/forum.php?mod=viewthread&tid=2962&highlight=twrp
getdroidtips.com/twrp-recovery-umidigi-a3/
unofficialtwrp.com/twrp-recovery-root-umidigi-a3/#Download_Files
romprovider.com/2019/01/umidigi-a3-twrp-root/#How_to_Install_twrp_Recovery_on_UMIDIGI_A3
Did anyone who has the same phone manage to do such?
Thanks!
Click to expand...
Click to collapse
I found some TWRP for that mobile, and inserting a GSI ROM is easy, I have everything in my telegram group t.me/umidigi_es
All GSi I have tested are running into bootloop. Does anyone has get GSI or any Android9 or 10 custom rom running on A3 ?
Hater Snapdragon said:
I found some TWRP for that mobile, and inserting a GSI ROM is easy, I have everything in my telegram group t.me/umidigi_es
Click to expand...
Click to collapse
But your telegram group is silent
Hi,
I am getting error 7 when trying to install latest Oxygen OS (v 9.0.5) on my Oneplus 3 via TWRP v. 3.0.2.
ADB sideload does not work (cancelled after 4x%).
If i try to flash the unzipped image via fastboot and then reboot to recovery, then for some reason, somehow, lineage os instead of oxygen os appears.
Even though internal storage was formatted before trying to install oxygen os. How is that possible??
Installing a modified oxygen zip as suggested in this guide did not help either https://forum.xda-developers.com/showthread.php?t=2302599.
Does anyone have an idea what is going wrong here?
Cadath said:
Hi,
I am getting error 7 when trying to install latest Oxygen OS (v 9.0.5) on my Oneplus 3 via TWRP v. 3.0.2.
ADB sideload does not work (cancelled after 4x%).
If i try to flash the unzipped image via fastboot and then reboot to recovery, then for some reason, somehow, lineage os instead of oxygen os appears.
Even though internal storage was formatted before trying to install oxygen os. How is that possible??
Installing a modified oxygen zip as suggested in this guide did not help either https://forum.xda-developers.com/showthread.php?t=2302599.
Does anyone have an idea what is going wrong here?
Click to expand...
Click to collapse
**
issue resolved - cause: did not use latest twrp version
i recently install linage os on my huawei ane-lx1 and after a restart the phone wont boot in to the os
and insted will kick me to twrp recovery i tried to start it from reboot system but it didn't work
Hi!
could you please explain step by step what have you done?
Cheers