I am having trouble rooting my Galaxy J7 Prime sm-j727t
Every Odin version I use with every TWRP tar file I try to use doesn't work. They either Fail or Odin stops responding when I try to load the tar file into the AP.
I've tried just using the CF Auto Root and those fail as well.
Any ideas what the issue is? I've been trying for two days with no success
Is your bootloader unlocked?
Emir Çetin said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
I thought Samsung phones come with bootloader unlocked already??
BramaKnox said:
I thought Samsung phones come with bootloader unlocked already??
Click to expand...
Click to collapse
You can check bootloader with dialer (search it).
Of phone has fastboot mode you can check bootloader with fastboot commands (search it too)
Emir Çetin said:
You can check bootloader with dialer (search it).
Of phone has fastboot mode you can check bootloader with fastboot commands (search it too)
Click to expand...
Click to collapse
When I put the phone in FastBoot mode I have the following options
Reboot System Now
Reboot to Bootloader
Apply update from ADB
Apply Update from SD card
Wide data/factory reset
Wipe Cashe partition
Mount /system
View recovery logs
Run graphics test
Power off
Lacking storage booting
1-Install your phones drivers on your PC.
2-Install adb and fastboot tools. https://www.addictivetips.com/android/download-adb-and-fastboot/
3-Reboot to fastboot.
4-Connect your phone with USB cable.
5-Open command prompt in adb and fastboot folder
6-Type fastboot devices (If you don't see your device there is a problem in drivers or fastboot)
7-Type fastboot oem device-info
You can check your bootloader status in that screen.
Emir Çetin said:
1-Install your phones drivers on your PC.
2-Install adb and fastboot tools. https://www.addictivetips.com/android/download-adb-and-fastboot/
3-Reboot to fastboot.
4-Connect your phone with USB cable.
5-Open command prompt in adb and fastboot folder
6-Type fastboot devices (If you don't see your device there is a problem in drivers or fastboot)
7-Type fastboot oem device-info
You can check your bootloader status in that screen.
Click to expand...
Click to collapse
Am I doing something wrong here ? see attached for screnshot
Emir Çetin said:
1-Install your phones drivers on your PC.
2-Install adb and fastboot tools. https://www.addictivetips.com/android/download-adb-and-fastboot/
3-Reboot to fastboot.
4-Connect your phone with USB cable.
5-Open command prompt in adb and fastboot folder
6-Type fastboot devices (If you don't see your device there is a problem in drivers or fastboot)
7-Type fastboot oem device-info
You can check your bootloader status in that screen.
Click to expand...
Click to collapse
I tried a some other steps. Tried using the video on youtube on a tut. When I get to the oem unlock I just get stuck with a msg sayng "waiting for any device" my device is plugged in, from what I know I have updated the samsung drivers (from previous attempt of other methods) the adb bootloader cmd did put my phone into fastboot mode
(White box, blue arrow point down with a straight line under the point)
(Blue screen with Downloading...)
do not turn off target
What am I missing here?
I tried rooting TWRP 3.2.3. with Odin on the phone again and it still failed
Does anyone else have any more insight to a possible solution?
Have you checked bootloader with dialer?
BramaKnox said:
I am having trouble rooting my Galaxy J7 Prime sm-j727t
Every Odin version I use with every TWRP tar file I try to use doesn't work. They either Fail or Odin stops responding when I try to load the tar file into the AP.
I've tried just using the CF Auto Root and those fail as well.
Any ideas what the issue is? I've been trying for two days with no success
Click to expand...
Click to collapse
Witch android you are?
can anyone pls help with how to root the Lenovo TB-x306f
i already unlocked the bootloader but that's as far as i was able to go with it.
i want to also like to install a recovery to flash the evolutionx rom if someone can pls help me and others that needs the same help.
GOD BLESS
I second that. There's nothing out there.
What I tried was to download the original ROM patch the boot.img with magical, replace in LMSA download folder and start a rescue. Didn't help. Got boot loop.
Ok, maybe a bit more details on what I tried already:
1. Enabled developer options. Good.
2. OEM unlocked. ADB connected. Good.
3. Boot to bootloader working. Good.
4. fastboot not listing the device after fastboot devices. Not good.
5. Googling around, found an universal root method with Magisk. Good.
6. Donwloaded, installed and ran RSA (Lenovo Rescue and Smart Assistant). Connected to device. Good.
7. Entered Rescue and using that downloaded the original ROM. Good.
C:\ProgramData\LMSA\Download\RomFiles\TB_X306F_S100134_210120_BMP
8. Copied boot.img to device, installed MagiskManager, patched image with magisk, downloaded the image to PC, replaced the original boot image with the patched one. Good.
9. Started the Rescue procedure in RSA. Rom flased. Good.
10. Bootloop. Bad.
No idea why would that not work, any help, pointers, ideas appreciated.
EDIT: There's a new ROM version now: TB_X306F_S100152_210205_BMP
For a preface, I have the same Tablet as OP. I tried to unlock the bootloader, following seemingly every guide out there but, no success so far. I've enabled debugging, activated OEM unlock and, adb detects my device but, after I send it to fastboot (adb reboot bootloader), no more commands work. I've updated the driver in Manager as one guide suggested but, still nothing.
I used command (fastboot OEM unlock) to continue but nothing. What am I doing wrong?
So just a tip for those that are looking for a guide to do a complete bootloader unlock for TB-X306F, there isn't one. I found a bunch of different ways to go about unlocking the bootloader from different Lenovo devices. First thing is that you need Minimal ABD Fastboot v1.4.3 if Platform Tools or LeTools doesn't work. Use CMD with admin rights, not PowerShell.
Everything else to unlock it is the same from all the guides out there. Make sure to use "fastboot flashing unlock" when unlocking instead of "fastboot oem unlock" or "fastboot oem unlock-go" if they dont work.
Second tip is for root when installing the Magisk patched boot image. While you're getting the boot.img, make sure to also grab the vbmeta.img from the ROM folder and place it in the Minimal ADB Fastboot folder where you will be using CMD. Do all the steps to get the patched boot image. Once you got the boot.img patched, enter fastboot then enter the command "fastboot --disable-verification flash vbmeta vbmeta.img" This will disable verification needed to boot correctly. After that, enter the command "fastboot flash boot <name of .img>" like normal to flash the patched boot.img from magisk. Then fastboot reboot.
This is what I did to get my TB-X306F unlocked and rooted. YMMV.
Different threads that I read to get to where I got, credit goes to them:
LENOVO Tab M10 Plus
After receiving my LENOVO Tab M10 Plus TB-X606F I tried to root my tablet. my Firmware version is TB-X606F_RF01_200103 - loaded the Lenovo Rescue and Smart Assistant (V5.0.0.25) - enabled OEM unlock - downloaded magisk - installed ADB now my...
forum.xda-developers.com
Lenovo M10 HD 2nd Gen X306F boot loop if boot.img is patched - android 10 · Issue #3832 · topjohnwu/Magisk
I recently installed magisk manager and extracted the boot.img from tb-x306f_rf01_200926 upon doing a fastboot flash boot magisk_patched.img , the machine goes into a boot loop. Am I doing somethin...
github.com
TWRP for LENOVO Tab M10 FHD - TB-X606F?
Hello, Possessing two tablets of this brand, I was wondering if a custom recovery existed for this one, I can look everywhere on all the forums, Russian, English, etc ... But, I do not find. If anyone can create one with this SOURCE CODE from...
forum.xda-developers.com
Lenovo tab m8
Hello, Any root and custom ROM available for the Lenovo tab m8 tb8505 variant? The stock rom feels good for the price but if something better to make the tab feel nicer.. Thanks :) :)
forum.xda-developers.com
By any chance can u pls.... Make a video on the steps u explained including on where to get that file needed. Pls thank u and GOD BLESS YOU. If u can find the time to do it .
I apologize for asking for so much help on this.
I too would very much care to see a video of the process but, I have no problem trying it first hand to myself. This tablet is just weird. It can be detected but, as soon as I boot into fastboot, it can't pick it up anymore even though, I had grabbed all of the recommended tools so far such as the fast Boot and the bundle.
A detailed guide would be good enough too
Following @doink_doink 's post (and some bootloops after...) I finally managed to root my Lenovo M10 HD 2 gen (TB-X306X) with magisk. I'll attempt to write a simple guide for who's still interested with rooting this kind of devices since there's not much literature online.
Rooting Lenovo M10 X306X (should also work for other models)
I am by no means held responsible for eventual damage you can inflict on your device, follow the underlying steps of your own accord.
Desktop Tools:
Minimal ADB and Fastboot
Lenovo Rescue Smart Assistant (LRSA from now on)
MTK (Mediatek) Preload Drivers (If your device isn't listed in fastboot)
Mobile Tools:
Magisk Manager App
Steps:
1 - From LRSA click on "Rescue" Tab
2 - Select the model of your tablet and then download
3 - From "Downloads" in the top right corner of the LRSA, click on "Open" to go into the LRSA download folder
4 - Connect your device and set it into USB Debugging and File Transfer
5 - Copy boot.img from LRSA download folder into the device's download folder
6 - Run Magisk Manager App on your device
7 - From Magisk Manager App choose "Install" on the right side of Magisk
8 - Choose the only option "Select and patch a file"
9 - Choose the boot.img you previously copied into the device's download folder
10 - Copy the new file "patched_boot.img" or similar name to the folder where Minimal ADB and Fastboot was installed
11 - Copy the file vbmeta.img from LRSA download folder to Minimal ADB and Fastboot folder
12 - From your device's settings enable developer options and enable OEM Unlock
13 - Execute a cmd session with administrator privileges
14 - Execute in the cmd: adb reboot bootloader (if everything went right the device should reboot in fastboot mode)
15 - Execute in the cmd: fastboot flashing unlock
16 - Execute in the cmd: fastboot --disable-verification flash vbmeta vbmeta.img
17 - Execute in the cmd: fastboot flash boot patched_boot.img
18 - Execute in the cmd: fastboot reboot
The device should correctly reboot and everything should be good to go now.
If something bad happens, like a bootloop or something, turn off the device and use the LRSA to rescue your device.
I don't get around to checking my email as often as I used to so I just now got around to seeing this but, I will try this after I get home from work in 10 hours plus time. If I can get this to successfully work, I will be flat out amazed. I had gotten to the point where I had just given up any and all hope that I would get it to work.
Show
Chairos said:
Following @doink_doink 's post (and some bootloops after...) I finally managed to root my Lenovo M10 HD 2 gen (TB-X306X) with magisk. I'll attempt to write a simple guide for who's still interested with rooting this kind of devices since there's not much literature online.
Rooting Lenovo M10 X306X (should also work for other models)
I am by no means held responsible for eventual damage you can inflict on your device, follow the underlying steps of your own accord.
Desktop Tools:
Minimal ADB and Fastboot
Lenovo Rescue Smart Assistant (LRSA from now on)
MTK (Mediatek) Preload Drivers (If your device isn't listed in fastboot)
Mobile Tools:
Magisk Manager App
Steps:
1 - From LRSA click on "Rescue" Tab
2 - Select the model of your tablet and then download
3 - From "Downloads" in the top right corner of the LRSA, click on "Open" to go into the LRSA download folder
4 - Connect your device and set it into USB Debugging and File Transfer
5 - Copy boot.img from LRSA download folder into the device's download folder
6 - Run Magisk Manager App on your device
7 - From Magisk Manager App choose "Install" on the right side of Magisk
8 - Choose the only option "Select and patch a file"
9 - Choose the boot.img you previously copied into the device's download folder
10 - Copy the new file "patched_boot.img" or similar name to the folder where Minimal ADB and Fastboot was installed
11 - Copy the file vbmeta.img from LRSA download folder to Minimal ADB and Fastboot folder
12 - From your device's settings enable developer options and enable OEM Unlock
13 - Execute a cmd session with administrator privileges
14 - Execute in the cmd: adb reboot bootloader (if everything went right the device should reboot in fastboot mode)
15 - Execute in the cmd: fastboot flashing unlock
16 - Execute in the cmd: fastboot --disable-verification flash vbmeta vbmeta.img
17 - Execute in the cmd: fastboot flash boot patched_boot.img
18 - Execute in the cmd: fastboot reboot
The device should correctly reboot and everything should be good to go now.
If something bad happens, like a bootloop or something, turn off the device and use the LRSA to rescue your device.
Click to expand...
Click to collapse
Hi I have the same device I have my patched boot.img and vbmeta.img but when I adb reboot bootloader fastboot commands don't work anymore fastboot flashing unlock says <waiting for device> and every other command. I have latest fastboot drivers google USB drivers I've done everything I have no hope please reply and help me
Hello231 said:
Show
Hi I have the same device I have my patched boot.img and vbmeta.img but when I adb reboot bootloader fastboot commands don't work anymore fastboot flashing unlock says <waiting for device> and every other command. I have latest fastboot drivers google USB drivers I've done everything I have no hope please reply and help me
Click to expand...
Click to collapse
* I have the TB-X306F***
Hello231 said:
Show
Hi I have the same device I have my patched boot.img and vbmeta.img but when I adb reboot bootloader fastboot commands don't work anymore fastboot flashing unlock says <waiting for device> and every other command. I have latest fastboot drivers google USB drivers I've done everything I have no hope please reply and help me
Click to expand...
Click to collapse
I'm currently experiencing the same issue. I have done everything, followed every step provided by Chairos and it wont surpass beyond the <Waiting for device> message. I just got this device today for a fair price, hoping I could root the device, and typical me forgot to research if it was officially compatible with TWRP.
cratee said:
I'm currently experiencing the same issue. I have done everything, followed every step provided by Chairos and it wont surpass beyond the <Waiting for device> message. I just got this device today for a fair price, hoping I could root the device, and typical me forgot to research if it was officially compatible with TWRP.
Click to expand...
Click to collapse
I got it for free for online classes but that's not the problem twrp is out for this device unofficialy but many say that it works, anyways good luck on u mate I gave up on rooting this device I can't do it anymore I've been trying for 4 months but nothing still if I had the Chance and the correct guide I would definitely do it
cratee said:
I'm currently experiencing the same issue. I have done everything, followed every step provided by Chairos and it wont surpass beyond the <Waiting for device> message. I just got this device today for a fair price, hoping I could root the device, and typical me forgot to research if it was officially compatible with TWRP.
Click to expand...
Click to collapse
Make sure you have the latest MTK usb drivers.
Hello Everyone,
I apologize for the delay but I didn't get notified of your replies.
I also got the waiting for device problem, but as @Yahoo Mike says, it's the MTK USB drivers that are used to communicate with the device in fastboot mode. Latest drivers should do.
Let me know if you're still experiencing the problem after installing the latest MTK drivers, since it depends on which motherboard the tablet has but all models should use mediatek.
Worked like a charm! Thanks.
Can anyone please confirm if there is a TWRP even unofficial IMG out there? And if any kind soul could share the file too I would be so grateful thanks
worked beautifully ...
just the installation of the latest MTK drivers is not very typical. however, you can follow this guide to install MTKL drivers and disable the driver signature enforcement
Download MTK USB Drivers for Windows 11, 10 - Driver Easy
To flash files to your MediaTek chipset phones, you need to have the latest MediaTek drivers installed. We'll show you how to install the MTK driver easily.
www.drivereasy.com
When you Restart: go to Advanced Options to find the Driver Signature Disablement option
I received yesterday my TB-X306X, with Android 10 and with software version S100184_210325_BMP. First thing to do was to unlock and root the tablet, without any issue, thanks to clear indications found on this thread.
Has anybody been able to find working TWRP for this tablet ?
Hi guys I am having an interested issue,
I want to install custom rom in my phone
I have downloaded in depth test and applied for un depth test
my mobile do connect to computer when it prompt to select mod I do select file transfer and my mobile do connect to laptop
and it shows in "adb devices" but when it goes into bootloader mod my mobile gets disconnected I have done everything I could
I have install every possible driver i got from articles but non worked is it the issue with my windows 10 ? or driver issue I have spent my whole night on this but couldn't find the way
fastboot devices
0purple said:
fastboot devices
Click to expand...
Click to collapse
what does it mean ?
when i connect my phone it prompt me with this and usb debugging is on
i tried adb devices but it didn't showed anything but when i chose transfer file it do connect to the laptop and shows in adb devices
najam489 said:
what does it mean ?
Click to expand...
Click to collapse
Try it once you are in fastboot
wow its showing
najam489 said:
wow its showing
Click to expand...
Click to collapse
0purple said:
Try it once you are in fastboot
Click to expand...
Click to collapse
i have another problem now my device is showing with fastboot devices but my devices status is locked when i tried this command "fastboot flash recovery recovery.img" it didnt work i am follwing this article https://www.guidetoroot.com/root-realme-3-pro/
thank you for your help my bootloader wasn't unlock it is now thanks a lot
It appears your device's bootloader is locked. Try:
fastboot oem unlock
fastboot flashing unlock
If that doesn't help, search for a guide on how to unlock bootloader for your specific brand.
It also looks like don't really know what you are doing. Make sure you are following trusted guide. If no, I'll be happy to help.
0purple said:
It appears your device's bootloader is locked. Try:
fastboot oem unlock
fastboot flashing unlock
If that doesn't help, search for a guide on how to unlock bootloader for your specific brand.
It also looks like don't really know what you are doing. Make sure you are following trusted guide. If no, I'll be happy to help.
Click to expand...
Click to collapse
well i did installed custom roms few time but i dont know much, i did unlock bootloader now the problem is i do install custom recovery twrp and it do installed and rom manager shows that custom recovery is installed but pressing volume down + power button just shows fastboot logo and it restart my phone, and with command "
adb reboot bootloader" i am able to boot into fastboot mood and when i go to recovery from their it open stock recovery instead of twrp
Stolen from my guide:
7. Go into fastboot mode
8. fastboot flash recovery recovery.img
9. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
10. fastboot reboot recovery
12. Sometimes recovery doesn't want to stick as a permanent one. To test it, hold the power button and select "Reboot to recovery". If you reboot to TWRP, you can move on, but if you reboot to stock one, flash recovery using fastboot again and from recovery flash recovery again (sounds crazy, right?). I won't give you instructions on this, research it yourself. Make sure guide you will find is for your device and your recovery.
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native english speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* If you want to use TWRP and do more with it, go to THIS THREAD to flash TWRP and flash magisk file yourself.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Download files:
ADB Tools: download here
Android Driver: download here
Magisk v24.2: download here
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
Root file for X690B-H691DE-Q-GL-210730V339
Root file for X690B-H691DE-Q-GL-210930V341
Root file for X690B-H691DE-Q-GL-211130V347
Root file for X690B-H691DE-Q-GL-220215V356
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
Put Magisk APK to ADB_Fastboot folder and rename it to "magisk.apk".
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it all up again and do number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta_empty.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver correctly or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
FLASH YOUR PHONE TO STOCK ROM FIRST or else YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
You need to flash your phone with clean stock ROM and SPFT. This is optional since almost previous system update is just about security and minor improvement. Use MTK Bypass Tool to flash it without DA file.
If you want to uninstall system apps, I suggest to do it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. IDK if you can do it either. Tutorial is on youtube, just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to HemanthJabalpuri for TWRP.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Hello Bro!
I want to ask you that, my infinix Note 7 BUILD NUMBER (X690B-H691DE-Q-GL-210630V338.
Is these files is 100% works?
Is there is any chances of crashing my phone during your told method?
EjazAhmad said:
Hello Bro!
I want to ask you that, my infinix Note 7 BUILD NUMBER (X690B-H691DE-Q-GL-210630V338.
Is these files is 100% works?
Is there is any chances of crashing my phone during your told method?
Click to expand...
Click to collapse
It works bro. I'm currently using the same build number too. Just make sure you install the driver and unlock bootloader first. Sorry i don't have tutorial video.
NyihuiGamer said:
It works bro. I'm currently using the same build number too. Just make sure you install the driver and unlock bootloader first. Sorry i don't have tutorial video.
Click to expand...
Click to collapse
thanks bro. it's really works for my phone now it rooted
EjazAhmad said:
thanks bro. it's really works for my phone now it rooted
Click to expand...
Click to collapse
Your welcome bro, glad you did it.
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it up all again and do just like number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot flash vbmeta vbmeta_patched.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and viola, it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
I haven't tried unroot my phone via Magisk app. So just to be safe, follow this unroot tutorial.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
If you want to uninstall system apps, I suggest just uninstall it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. Tutorial is alot on youtube so just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
Bro when i use command fastboot flash boot boot_magisk.img
It shows (not recognized as an internal or external command) please help any solution
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it up all again and do just like number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot flash vbmeta vbmeta_patched.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and viola, it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
I haven't tried unroot my phone via Magisk app. So just to be safe, follow this unroot tutorial.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
If you want to uninstall system apps, I suggest just uninstall it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. Tutorial is alot on youtube so just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
Thank you so much bro I had been Trying from months ...It Worked I have successfully Rooted my Infinix Note 7 thanks you so much love you bro
BilalkhAn1723 said:
Thank you so much bro I had been Trying from months ...It Worked I have successfully Rooted my Infinix Note 7 thanks you so much love you bro
Click to expand...
Click to collapse
Oh, you solve your problem. Your welcome bro .
NyihuiGamer said:
Oh, you solve your problem. Your welcome bro .
Click to expand...
Click to collapse
I unroot my infinix and when i try to root it agian it stuck in fastboot logo and didn't bootpls help!
Help me2 said:
I unroot my infinix and when i try to root it agian it stuck in fastboot logo and didn't bootpls help!
Click to expand...
Click to collapse
I want to root it again
Help me2 said:
I want to root it again
Click to expand...
Click to collapse
Are you sure you match it with your current firmware?
NyihuiGamer said:
Are you sure you match it with your current firmware?
Click to expand...
Click to collapse
Yes
Help me2 said:
Yes
Click to expand...
Click to collapse
i rooted my infinix successfully first time v338
then i flashed boot_ori.image and boot to unrooted system , all good.
But when i tried to root it same way again, it won't work anymore. once flash magisk_boot.img, only reboot to fastboot.
Any one can help ?
Thanks a lot
i rooted my infinix successfully first time v338
then i flashed boot_ori.image and boot to unrooted system , all good.
But when i tried to root it same way again, it won't work anymore. once flash magisk_boot.img, only reboot to fastboot.
Any one can help ?
Thanks a lot
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native english speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
Root file for X690B-H691DE-Q-GL-210730V339
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it all up again and do number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta_empty.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver correctly or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or else YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
* Starting from firmware version X690B-H691DE-Q-GL-210630V338, if you already unroot your phone and it still failed to update, you need to flash your phone with clean stock ROM and SPFT. This is optional since almost previous system update is just about security and minor improvement. Use MTK Bypass Tool to flash it without DA file.
If you want to uninstall system apps, I suggest to do it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. IDK if you can do it either. Tutorial is on youtube, just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
bro can u provide twrp or made a post how to get infinix note 7 twrp
NyihuiGamer said:
Hi guys, this is my first time creating a thread at XDA. So if there's anything wrong please correct me, and I'm not a native english speaker so I'm sorry if my word is confusing .
I'm not responsible for any damage that will happen to your phone. So DO IT WITH YOUR OWN RISK.
UNLOCK BOOTLOADER WILL WIPE YOUR INTERNAL STORAGE, so please backup your data first before continue.
Rooting process WILL VOID YOUR GUARANTEE so keep that in mind.
If your phone is below version 320, please update your system first at least until version 320.
READ CAREFULLY, skip a step and it might brick your phone.
* There's Re-lock Bootloader and System Update guide at the bottom, so read it if you need it.
THIS IS FOR INFINIX NOTE 7 (X690B) ONLY. If your phone is X690/X690C I'm sorry but I can't help you since I don't have such phone model .
Please download the files according to your current build number.
Root file for X690B-H691DE-Q-GL-201014V320
Root file for X690B-H691DE-Q-GL-201201V322
Root file for X690B-H691DE-Q-GL-210127V326
Root file for X690B-H691DE-Q-GL-210415V333
Root file for X690B-H691DE-Q-GL-210622V337
Root file for X690B-H691DE-Q-GL-210630V338
Root file for X690B-H691DE-Q-GL-210730V339
* Magisk version 23.0
********** PREPARATION **********
Extract the downloaded files in your PC
Open driverInstall.exe and install it.
Open Root folder, copy all the data to ADB_Fastboot folder.
In your phone, enable Developer Options.
At Developer Options, enable OEM Unlocking, enable USB Debugging, and set Default USB Configuration to File Transfer.
Plug your phone to your PC and run "cmd-here.exe" on your PC.
********** UNLOCK BOOTLOADER **********
If you already unlocked your bootloader, please skip this step.
In this step, your internal storage will be WIPED.
Type adb devices, there will be a popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing unlock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
Your phone is wiped so set it all up again and do number 5 at Preparation step again.
********** ROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_magisk.img.
Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta_empty.img.
Type fastboot reboot.
Your phone will reboot. After it goes to homescreen, type adb install magisk.apk.
Plug out your phone, connect to the internet, and open Magisk.
It'll shows a popup "Requires Additional Setup", tap OK.
Your phone will reboot itself and it's finally rooted.
* If you can't flash boot and vbmeta via fastboot, possibly because you're not installing the driver correctly or you haven't unlock your bootloader yet. So please do that step first.
********** UNROOT/FLASH VIA FASTBOOT **********
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flash boot boot_ori.img.
Type fastboot flash vbmeta vbmeta_ori.img.
Type fastboot reboot.
********** RELOCK BOOTLOADER **********
UNROOT YOUR PHONE FIRST or else YOU WILL BRICK YOUR PHONE.
Type adb devices, there will be popup confirmation, tap Allow.
Type adb reboot-bootloader. Wait until there's USB logo with Fastboot text on your phone.
Type fastboot flashing lock. Press Volume UP on your phone to confirm.
If it's done, type fastboot reboot.
********** SYSTEM UPDATE **********
Basically it's doable, but only if your system partition is unmodified. You just unroot your phone and update the system in Settings.
* Starting from firmware version X690B-H691DE-Q-GL-210630V338, if you already unroot your phone and it still failed to update, you need to flash your phone with clean stock ROM and SPFT. This is optional since almost previous system update is just about security and minor improvement. Use MTK Bypass Tool to flash it without DA file.
If you want to uninstall system apps, I suggest to do it via ADB since uninstalling via root app is modifying your system, dangerous and might brick your phone. IDK if you can do it either. Tutorial is on youtube, just search it yourself.
Thanks to topjohnwu for Magisk.
Thanks to hovatek and X3non at Hovatek Forum for guide.
Click to expand...
Click to collapse
Bro, do you have custom ROM recommendation matched with Infinix Note 7? My version is V339.
OREOxd said:
bro can u provide twrp or made a post how to get infinix note 7 twrp
Click to expand...
Click to collapse
There's tutorial on hovatek forum, you can try it. I haven't tried that but if you want to try and error just go there and do it yourself.
Zienho said:
Bro, do you have custom ROM recommendation matched with Infinix Note 7? My version is V339.
Click to expand...
Click to collapse
IDK about custom rom, but you can try GSI ROM. AFAIK only AOSP based rom can boot on this device. Maybe i'm doing it wrong because i'm not a linux expert, so just flash it yourself using fastbootd method.
NyihuiGamer said:
There's tutorial on hovatek forum, you can try it. I haven't tried that but if you want to try and error just go there and do it yourself.
IDK about custom rom, but you can try GSI ROM. AFAIK only AOSP based rom can boot on this device. Maybe i'm doing it wrong because i'm not a linux expert, so just flash it yourself using fastbootd method.
Click to expand...
Click to collapse
Thanks bro for the reply. I am on way doing it.
Thank You, I did it on V341. The steps are clearly easy to be understood.
Can you help me to update my system update? Im done unrooting may infinix note 7 but still it is error when start updating. Can you also create a tutorial on how to flash this phone so i can update it using wifi only, thankyou.