Related
I was thinking about purchasing an Invisible shield at a mall nearby, but just to make sure before i buy it, are there any bad things about it?
davidst3r said:
I was thinking about purchasing an Invisible shield at a mall nearby, but just to make sure before i buy it, are there any bad things about it?
Click to expand...
Click to collapse
I only use it for the screen, not the full body coverage (thought it looked better unglossy)
It applies really well if you take your time and follow directions.
Looks as if you didn't use a screen protector at all.
Nice texture, nothing funny feeling.
Not really plastic more of a rubbery shield that doesn't break.
Doesn't blur or scratch (scratches can be buffed out basically.
Can easily be replaced through zagg (they will send you a new one for almost any excuse haha)
Only funny thing is that it kind shows a different looking effect when viewing at a small angle and when the phone is off (not a problem at all really...)
If you get it professional installed (like I did) it's well worth it. I got the full body and I notice that the little pieces that are cut to fit around corners come up over time, and the corners can fill with dirt and also peel up.
Since InvisibleShield comes with a lifetime guarantee against anything, it's well worth it. You can get it replaced anytime, question-free, just a $10 fee for installation. I've gotten it replaced 3 times over the 7 months I've owned my phone and it's well worth it :]. Fun to show off too!
i bought it online when they were running a promo on it (full body+screen).
after a afternoon of chilling and bbq'n i decided i would install it that same night.. bad move. i mean a few beers weren't gonna hurt right? lol
Its easy to install "after" you have tried it with a few pieces lol.
took me like 45mins and it came out good overall. the back corner piece does suck and is peeling off somewhat.
i would do this again but would rather have it done by a pro though
if your gonna do this yourself make sure you get it really wet and don't pull too hard on the material when your peeling it off the paper as this will look bad when you install it and after it dries.
lol i got a shieldskin, pretty much same thing as the invisishield, it covered 95% of the phone. A few weeks later i dropped my G1 on the pavement and it landed on a small jagged pebble on the 5% that wasn't covered. FML.
Anyway, I ditched that for a full body case. Better coverage for a bigger phone, im okay with it.
i put the whole cover on, screen piece is excellent..feels good, doesn't scratch, can't even tell its there. the other parts are ok, the corners do collect a lot of gunk, and it is a fingerprint magnet, but easily cleaned up. kinda tricky to install yourself though. if you just set it down all over, or put it in your pocket, its great, if you're the kind of person who drops things a lot, go with something else for the body and just get the screen piece.
I personally cannot stand invisible shield. I have never had any luck with them. They always end up feeling like orange peel to me. I know that its not me, because when I install a bodyguardz it never orange peels. Its always perfect. Plus you get 2 for the price of one!
I recommend Bodyguardz hands down.
http://www.bodyguardz.com/T_Mobile_G1_p/tmobileg1.htm?Click=9481
I like mine, a lot
I have on on my ipod that I guess I gave to my four-year-old. It's tough stuff.
I think it sounds wacko, but I am convinced the skin absorbs a little of the impact of a drop. It really is scratch proof, and if you put them on right, it should cover all of the unit except of the corners of the battery cover &($11 on ebay). It's 3D curved, so there really isn't a way to engineer it perfectly. I took my glasses off (hard core near sighted) and dabbed a bit of fingernail top coat in the cracks to match the sheen and protect a little. It hasn't chipped or peeled in the tiny cracks that were left.
Yes, eventually they do peel up, particularly if you're sliding it in & out of another really tight case, but even so, they stay put pretty well despite a corner or two coming up. If it's intsalled correctly and there are no regular spots where it's worn really hard, I can't imagine anything peeling up unless you pick at it.
I put mine on myself, entirely sober and well-slept. I was really concerned about the job I did at first, but the skin settles into place after a day or two. Now it looks pretty good (i.e. I'm happy with it, so it's notably invisible to other people).
I like the "StickyPad" effect it has, particularly on the back, but it's handy on the front for when I have it face down (I like Face of Ring in market). It's very rubbery, so it doesn't slide around on a desk, nightstand or dashboard, and with foam on car mounts, etc. it really stays put.
If anything, I would get a screen protector from another manufacturer that isn't so glossy. It has a bit of a wavy texture if you look closely, so on the screen it looks a little odd if you're thinking about it, and looking at it. A slippery screen for finger gestures makes more sense, but I'm leaving mine in place becuase I know it's rock solid screen protection (and it's cut to fit the rest of the skin).
I'm looking forward to putting on my next one because I know it'll turn out better. I'll put the screen protector on first, then line up the surrounding screen-edge side peices to match it at the top and the bottom of the screen, so that then I can line up the top-edge and bottom edge pieces with a straight line from the screen side & corners, rather than the bottom edge of the screen assembly. The rest was really straightforward, tedious, and not for people who don't have a knack for fine motor movement and estimating sall measurements fairly acurately. But I can't even pay someone to replace my brake pads, much less put on a phone protector.
And what that other guy said: REALLY, REALLY WET. I think I'll be more liberal with the spray next time. You can slide it around for about a second without stretching it. If you have a lint free towel, it handy for keeping the spray out of the unit but still have enough to slide around until it's right.
I had trouble with the corner opposite the camera button. The phone curves in the back, and the dart (the v-shaped cut to make the corner) wasn't quite deep enough, so I used Swiss Army knife scissors and trimmed the extra that just wouldn't stick down because it was just too much. I'm glad I did.
I know there's lint under my screen protector, but I can't see it. The bubbles, if they're tiny, just seem to disappear. It's really a cool material, and worth a try just to see the stuff.
Besides, it fits inside another case.
(I do sew, but I refuse to knit.)
I have a question about this case. I found it for $12 on amazon and I think it's worth it and I think it will work great. However, I have some concerns about the screen protector and how messy/clean it is and how easy it is to apply. Also im worried about if it glares a lot because that would be a problem to me. My other concern though is I saw in some video reviews that the top of the case it doesn't 'hug' it firmly there and is kinda loose at that spot. Is this an issue or should it be fine?
Thanks
The screen protector scratches relatively easily, but that isn't a huge problem, and it doesn't glare. The protector is also the exact size of the screen, so if you get it a millimeter off, you'll have an ugly white line with grime underneath. The protector is applied dryly and needs to be applied very quickly or else dust particles will quickly attach to it. It's also kind of tricky getting it on, as the instructions aren't the best. If you don't get it on right the first time, it's a real pain. I resolved this by washing the protector and using a lint roller to get the dust off before reapplying.
The case itself is great and looks nice, and it's protected my phone from a launch onto hardwood from about 4 feet. As you said, the case doesn't hug the phone properly at the top and bottom. The amount of "hug" will vary from case to case, mine is right on there (still floppy though) but my brother's case has a massive gap. I heard they fixed it with a more recent design though. One of my biggest gripes is that the silicon is a dust/lint magnet, and there's always dust/lint getting into the top/bottom gaps. This is really unsightly and I need to clean the dust regularly as it bothers me, and do a full case clean every week. I also don't dig the hard plastic as I have dry skin, which makes it difficult to hold.
yeah that would be a deal breaker for me.. I had a silicone case for my previous phone and I actually didn't use it because I needed to freely move my fingers off and on the edges (fruit ninja lol). Tho I don't play that game anymore really. My other concern is will the top of the phone when your putting it into your pocket have like a 'drag' effect due to the silicone and it not being tight on the top or does it cleanly go in/out of the pocket when its rubbing against your pocket? That was also kinda an issue to me as well with my old phone. Also what other cases would you recommend (can be another otterbox)? I might be looking for another case if I don't determine this one suiting me.
I have this case. I chose not to use the screen protector so I cant comment on that. The case is great. The rubber piece that protects the mirco usb charger is annoying as hell (not sure why i havent cut it off yet.) The phone does seem to slide towards the bottom sometimes so there can be a small gap at the top. I would recomend this case. especially at $12
I found this review of the Nilkin case for the Xperia P helpful, and wanted to give back by posting a review of my own. Had been pretty keen on the Nilkin case myself, but after reading the reports of the corners cracking, I went looking for another quality option and ended up with a Rock Quicksand. This is a "dark grey" model I bought from Casesss.com.
Note the white specks that appear on the case are bits of dust/fluff that aren't part of the case surface - sorry for overlooking these but they didn't look that visible while taking the pics, and it'd be too much of a pain setting up my tripod and lighting again to redo them nicely with my crappy camera. Also note the pics convey a sort of "white speckliness" overall which is not how it looks in person - IMO, the case looks better than it appears in the pics.
First, the positives:
- The material is really nice. It looks and feels classier than silicone or textured plastic.
- With moist/sweaty hands, the case provides more grip than the smooth metal surfaces of the phone.
- It allows the phone to sit more securely on your lap or a nearby surface (e.g. train/bus seat) with less fear of it sliding off and onto the floor.
- The cutouts are accurate, and there's plenty of clearance left around the headphone jack.
And the cons/caveats:
- With dry fingers, the material is actually less grippy than the phone's smooth metal surfaces.
- Some reviews of Rock Quicksand cases for other phones suggested the material doesn't grip pocket liners - I disagree. It's not a problem with big/loose pockets on cotton pants, but in more constricted front jeans pockets, it will tend to pull out the pocket liner when removing the phone. Still, it's not as bad as silicone in this respect, and doesn't retain nearly as much fluff/dust as silicone.
- The cutout for the transparent bar is much smaller than one on the Nilkin case. This probably increases the case's strength but doesn't look as cool.
- The buttons are a bit harder to press than without the case, but this seems unavoidable - the cutouts appear as non-intrusive as is possible for this style of case.
Overall, I'm very happy with the case for the purpose of providing extra grip in the situations I most need it and providing some protection, without making the phone look ugly. Would be happy to answer any questions in case I missed anything.
I am also using this product. Very good case.
Sent from my LT22i
can one get it online?
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Adityagrao said:
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Click to expand...
Click to collapse
Screenies please?
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
rogue operator said:
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
Click to expand...
Click to collapse
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
peeled too much... which casing can on get or leather pouch?
Zap_12100 said:
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
Click to expand...
Click to collapse
uhm very bad....did you go tu the beach or something???
I used to use this case and yes, it's beautiful at first but after a long time of using, it become ugly and i must change another one =.=
i wish i can find one of those in Egypt ,
I also got one of this case but mine is purple and the rubber of some place on the casing have lost but between it's a nice case I'm happy with it.
After just over three months use, I can report the "sand" has now rubbed off the rear corner adjacent to the one I pictured on the previous page (that one hasn't gotten any worse since the picture was taken). The three other front corners also show the same sort of wear, but smaller. The edges and larger surfaces show no signs of wear.
In my case, it seems most likely the wear is being caused simply by the phone rubbing against the pocket liner when in my jeans/jacket pocket, so it's not a very durable surface. With just the corners worn, mine still looks classier overall than other cases and I'd just as soon choose it again over the alternatives, but I can't recommend it to those whose phones are treated less softly than mine, as it may end up looking like crap in a short period.
Very usefull case it is..:good: protects the device very well....
I have a quicksand case for my Xperia Sola. I just got it a few months back and so far I'm quite happy with it. The overall build quality seems to be very robust. However on two corners the rubber starts to come off, but that doesn't really bother me as long my phone is save
i haven't use case for a yeah and now my XP look like old phone :cyclops:
is the available for xperia go?
GGG
So i have read rants on the Z1 having self breaking glass, and alittle on the ultra. Most of the threads on the ultra though have been, slight to moderate abuse (sat on)(backpack of stuff) causing breaks. Not the classic Z1 of "took phone out of front pocket". My normal routine is only having the phone in my front pocket when going from my desk to the car. Other than that its on my desk or left in my car (i hate walking around with a phone in my pants).
Mines coming this week and i kinda want to take some preventive steps, and wondering if sony really is replacing "not blown to bits" screens under warranty in at least the USA.
I hear it comes with a factory "screen protector" that you should leave on, and put another screen protector on top of it. Is that true or is the factory protector just the stock "tabbed" film that should be removed right after opening the box? I have a front/back screen protector coming, but wanted to know if i should peel off the factory one first.
nightanole said:
So i have read rants on the Z1 having self breaking glass, and alittle on the ultra. Most of the threads on the ultra though have been, slight to moderate abuse (sat on)(backpack of stuff) causing breaks. Not the classic Z1 of "took phone out of front pocket". My normal routine is only having the phone in my front pocket when going from my desk to the car. Other than that its on my desk or left in my car (i hate walking around with a phone in my pants).
Mines coming this week and i kinda want to take some preventive steps, and wondering if sony really is replacing "not blown to bits" screens under warranty in at least the USA.
I hear it comes with a factory "screen protector" that you should leave on, and put another screen protector on top of it. Is that true or is the factory protector just the stock "tabbed" film that should be removed right after opening the box? I have a front/back screen protector coming, but wanted to know if i should peel off the factory one first.
Click to expand...
Click to collapse
one year in, and no glass breaking
your routine won't break the phone, i'm sure
screen protector, i have one on top of the anti shatter film provided with the phone, both front and back, and both scratched to hell, but too lazy to replace
Definitely put a aftermarket screen protector over the anti shatter film. The ASF is too soft, but is a pain in the arse to remove by all accounts
I've had my ZU for about 9 months now and have dropped it 3 times onto concrete, once without any screen proctor or case, the other two times has been with a wallet/flip case. The last time I dropped it the case even broke - still the screen is intact.
I too thought it wont happen to mine, till it really did, of course it's not self breaking glass for no reason, but more likely the most logical reason I could think of is, the stress accumulated from the daily use, a bit of pressure while in pocket, or backpack, along with the heat / cold temperature, whatever other bull crap from regular use, over a period of time, that stress cause the glass to be broken.
I pretty much babied my Z Ultra, have back casing, Glass M on the front, Skinomi on the back, never dropped, all in like new condition. Then last Sunday I was on my bike ride, put it inside my backpack, along with my wallet, then couple hours later, took it out from my backpack only to find the glass, under the M Glass screen protector, under the original ASF, has a hairline crack, and pretty much as good as brick, since it wont register any touch, I can see a call coming in, but cant answer it since the display doesnt work.
OP said it happens with Z1, I read that it happens with Z2, and it happens with my Z Ultra, so I think it's just something on their glass quality along with their full glass design, it is impacting a small number of them, not all, just small number, but still the problem indeed does exists.
But I still buy another Z Ultra in a heart beat without much thinking, as a matter of fact already got another one from expensys, with the price is so cheap now, the smoothness, the crisp display, the waterproofness, it still worth every penny.
Mine broke in the pocket, and so did others.
It can break. But with that said, the risk yours will break in the pocket with no abuse is small.
Sony aren't very consistent in handling these cases. Sometimes they get it fixed on warranty, sometimes they're not. But if you get a first negative answer just send in a complaint and they might turn around (as in my case).
I just got mine back. I had the asf removed on the previous one, I'm not taking it off now. And I'm doubling up with tempered glass protectors.
i personally recommend removal of the anti shater layer, if you live in humid climates, as it can cause the residual moisture and oils from your fingers to cause key presses. i had a bad issue with this till i spend an hour with a razor blade removing it.
some people also claim that removing the layer voids your warranty, but i had the phone replaced about a month back with my extended warranty and had no issues with replacement regardless of having the film removed.
boystuff said:
i personally recommend removal of the anti shater layer, if you live in humid climates, as it can cause the residual moisture and oils from your fingers to cause key presses. i had a bad issue with this till i spend an hour with a razor blade removing it.
some people also claim that removing the layer voids your warranty, but i had the phone replaced about a month back with my extended warranty and had no issues with replacement regardless of having the film removed.
Click to expand...
Click to collapse
There is so much wrong with this post.
boystuff said:
i personally recommend removal of the anti shater layer, if you live in humid climates, as it can cause the residual moisture and oils from your fingers to cause key presses. i had a bad issue with this till i spend an hour with a razor blade removing it.
some people also claim that removing the layer voids your warranty, but i had the phone replaced about a month back with my extended warranty and had no issues with replacement regardless of having the film removed.
Click to expand...
Click to collapse
i live right on the equator, and have not had any problems with this (i also use a screen protector on top of the antishatter film). do you mean to say by removing the anti-shatter film, the glass doesn't pick up any fingerprints and oil? a screen can only be oleophobic for so long.
To those who have had the screen crack in their pockets: were you using a hard case to provide rigidity to the device?
I also just received a Z Ultra and read through the massive threads on Sony's forums on these problems. It just seems the device is so thin it has too much flex in the pocket. I'm even hesitant to use the leather flipstyle case if it doesn'tt provide enough rigidity.
I'm thinking maybe the aluminum bumper case with GlassM protectors on both sides would work nicely together. Hopefully the aluminum won't degrade the signal quality too harshly.
luceri84 said:
To those who have had the screen crack in their pockets: were you using a hard case to provide rigidity to the device?
I also just received a Z Ultra and read through the massive threads on Sony's forums on these problems. It just seems the device is so thin it has too much flex in the pocket. I'm even hesitant to use the leather flipstyle case if it doesn'tt provide enough rigidity.
I'm thinking maybe the aluminum bumper case with GlassM protectors on both sides would work nicely together. Hopefully the aluminum won't degrade the signal quality too harshly.
Click to expand...
Click to collapse
Those hair thin aluminum bumper cases wont do squat, the thick glassM m shields wont do squat. The device is just too long and think. Your best bet is to treat it like a full size tablet. Dont sit with it in your pocket, dont put it in your bag without being in a separate compartment. The poor thing is like 1/4" thick and made out of aluminum and glass. I still dont know why they choose this glass. I can take my droid incredible with gorilla glass and pound the screen on the corner of a desk over and over, no scratches. This sony phone just doesnt have any flex for the glass.
I just through an iLLumiShield on the front and back so i can throw it on the table and not worry about scratches.
nightanole said:
Those hair thin aluminum bumper cases wont do squat, the thick glassM m shields wont do squat. The device is just too long and think. Your best bet is to treat it like a full size tablet. Dont sit with it in your pocket, dont put it in your bag without being in a separate compartment. The poor thing is like 1/4" thick and made out of aluminum and glass. I still dont know why they choose this glass. I can take my droid incredible with gorilla glass and pound the screen on the corner of a desk over and over, no scratches. This sony phone just doesnt have any flex for the glass.
I just through an iLLumiShield on the front and back so i can throw it on the table and not worry about scratches.
Click to expand...
Click to collapse
But if flex is the issue then wouldn't a solid metal frame that doesn't bend around the perimeter of the phone rectify such concern?
luceri84 said:
But if flex is the issue then wouldn't a solid metal frame that doesn't bend around the perimeter of the phone rectify such concern?
Click to expand...
Click to collapse
Yes but the aluminum bumper case is very flimsy stamped aluminum. You would need something with zero give like aircraft grade. An aluminum or plastic shell would be the way to go, but That bumper case is just to prevent chiping of the sides, and give a mm lip when laying the phone on its front/back.
I just use a rubber back cover and THAT'S IT. No problems for me. And yes i keep it in my jeans' pocket most of the time. It does hinder my movement a little though
Sent from my C6802 using XDA Premium 4 mobile app
The better way to deal with the size is not to put in jeans pocket. In winter, jacket pockets I guess are ok. In summer, I guess the best way would be to buy a camera bag or something for this. I think that would solve this problem.
I just got the phone and I am kinda surprised to see how thin it is. Definitely not a phone you should stress too much.
A big thanks to several members of this community, biggest thanks goes to T-R as I followed much of his instructions here
My goal was to replace the back but also place metal plates for my CD tray magnetic car holder.
I ordered three of the factory second backs from SlickWraps, the dark leather, football leather and cork. My first try was going to be with the cork as I figured it to be the most forgiving. I ordered the same plastic sheeting and 3M strips that T-R ordered.
Tools I used:
Hair Dryer to heat back
Library card to help peel off back
Pick to start initial prying of back
1/16th drill bit for microphone hole
Xacto knife to cut plastic sheet
Dremel to cut metal plate
I'm not good at step by step instructions so I apologize for not walking through what steps it took to make this happen. Feel free to ask if you are curious. My first attempt at the metal plate was too big and the back kept popping off. I put only one of the plates back over the little divot under the camera but didn't take pics before putting back on again as I didn't think it would work, seems it did.
My pros and cons and pics.
Pros:
Love the feel of the cork
Feels close to stock when not being nit picky
My slickwrap experience was great, order on Wednesday, in my mailbox on Friday
Fit of the cork back is impressively good minus one issue, see below
Cons:
Buy extra stickers, I screwed up the first and was glad to have a second but will need more if I want to change it
Mic hole is no where near where it should be on the cork back, might be part of why it's a factory second
Stickers are not as strong as the Motorola goop
Rookie mistake:
I had left the screen naked while working on all of this and scratched the hell out of it (my standards, others ask where when they look at it)
thanks for sharing. always love to see pics of what others are doing. what kind of magnetic holder do u use? any pics of the damage to the screen?
sand1303 said:
thanks for sharing. always love to see pics of what others are doing. what kind of magnetic holder do u use? any pics of the damage to the screen?
Click to expand...
Click to collapse
I tried taking a pic of the scratches and they don't show up well; they are probably not as bad as I make them out to be. I switched over to this mount because it has the strongest magnet I could find in a CD mount holder.
I'm tempted to switch the back out for one of the leather ones, I'm never satisfied.
No matter how nice it looks, it's certainly not worth scratching the screen for. I never put my phone face down on any surface that is not soft and I've never scratched the screen on any of my numerous phones. I hate screen protectors because they always look and feel horrible but I am super careful about the screen. That's the bit you interact with all the time and it would really bother me to have even the slightest scratch on it.
Otherwise, good job.
Was curious on how the plastic backing under the skin was holding in terms of sticking. I was thinking about doing the same thing and wanted to know how good the plastic/tape combo was at holding over time. Any lifting occur?
Jawrduhn said:
Was curious on how the plastic backing under the skin was holding in terms of sticking. I was thinking about doing the same thing and wanted to know how good the plastic/tape combo was at holding over time. Any lifting occur?
Click to expand...
Click to collapse
My first install was my learning exercise and I can't say it would have survived long term, started popping up on the edges. Just this past week I installed the football textured leather back and am very happy with it. Thus far it is not popping up anywhere but I had learned a lot from my last install. New learnings:
Have a brand new x-acto blade, works so much easier making the plastic template back
Scuff the plastic backing before applying the sticker, it comes shiny and smooth
I bought a heat gun and found out quickly the plastic back can warp easily so be careful when heating it
Still heat it though and hold for a good 30-60 seconds after
Leave a small gap around around the sticky tape after applying to the back, if you try to cut it perfect you land up with a bare edge
Install the plastic back first to the phone, leave it for a day if you can. If it pops up, heat the hell out of it and hold as strongly as you can for a minute or so ( I wore gloves)
Heat again after applying the leather back, heat really helps the application stick
If you buy the regular leather be aware it's not treated with any water resistance or proofing and any water will mark it.
If you are buying the Factory Second versions buy a couple, they are only $10 each and $2 shipping total.
The bump near the camera is from the metal plate I installed for my car mount, I couldn't fully conceal it.
thepktrckt said:
My first install was my learning exercise and I can't say it would have survived long term, started popping up on the edges. Just this past week I installed the football textured leather back and am very happy with it. Thus far it is not popping up anywhere but I had learned a lot from my last install. New learnings:
Have a brand new x-acto blade, works so much easier making the plastic template back
Scuff the plastic backing before applying the sticker, it comes shiny and smooth
I bought a heat gun and found out quickly the plastic back can warp easily so be careful when heating it
Still heat it though and hold for a good 30-60 seconds after
Leave a small gap around around the sticky tape after applying to the back, if you try to cut it perfect you land up with a bare edge
Install the plastic back first to the phone, leave it for a day if you can. If it pops up, heat the hell out of it and hold as strongly as you can for a minute or so ( I wore gloves)
Heat again after applying the leather back, heat really helps the application stick
If you buy the regular leather be aware it's not treated with any water resistance or proofing and any water will mark it.
If you are buying the Factory Second versions buy a couple, they are only $10 each and $2 shipping total.
The bump near the camera is from the metal plate I installed for my car mount, I couldn't fully conceal it.
Click to expand...
Click to collapse
Awesome, thanks for the tips. I'm actually using a skin from TOAST so I'll see how everything pans out.
thepktrckt said:
My first install was my learning exercise and I can't say it would have survived long term, started popping up on the edges. Just this past week I installed the football textured leather back and am very happy with it. Thus far it is not popping up anywhere but I had learned a lot from my last install. New learnings:
Have a brand new x-acto blade, works so much easier making the plastic template back
Scuff the plastic backing before applying the sticker, it comes shiny and smooth
I bought a heat gun and found out quickly the plastic back can warp easily so be careful when heating it
Still heat it though and hold for a good 30-60 seconds after
Leave a small gap around around the sticky tape after applying to the back, if you try to cut it perfect you land up with a bare edge
Install the plastic back first to the phone, leave it for a day if you can. If it pops up, heat the hell out of it and hold as strongly as you can for a minute or so ( I wore gloves)
Heat again after applying the leather back, heat really helps the application stick
If you buy the regular leather be aware it's not treated with any water resistance or proofing and any water will mark it.
If you are buying the Factory Second versions buy a couple, they are only $10 each and $2 shipping total.
The bump near the camera is from the metal plate I installed for my car mount, I couldn't fully conceal it.
Click to expand...
Click to collapse
Is it a formed vinyl patterned or really leather? footballs are supposed to be made of pig leather right?
I'd like to see ostrich
LOL haven't seen Ostrich yet. It's definitely textured bovine leather not plastic and looks like it is treated as I haven't had any water stains yet.
Forgot to ask, when you said your first attempt had he edges raising, were you referring to the plastic or the leather?
lotus49 said:
No matter how nice it looks, it's certainly not worth scratching the screen for.
Click to expand...
Click to collapse
I agree. Even the slightest hint of a scratch and I would lose a bunch of sleep. But unlike you, I use a glass protector which feels like the phone screen.
Jawrduhn said:
Forgot to ask, when you said your first attempt had he edges raising, were you referring to the plastic or the leather?
Click to expand...
Click to collapse
Both but most of it was the plastic peeling off of the back of the phone. It was applied twice though and I'm certain that impacted the adhesion.
My Nexus with Cork back from Slickwraps.
http://kryon.smugmug.com/Purenexus/i-bRKJdsk/0/O/OPERATIONPNbanner5x1.png
Has anyone installed this without the replacement back? and if so can I get a pic?
How is the cork back holding out for you. Can you post any pics after wear and tear.
Sent from my Nexus 6 using Tapatalk
I am at work so I can't post pics but I made the jump and got one a couple weeks ago. I like the way it looks but if you tend to work on cars or have dirty hands from working, this is not for you. My cork back is filthy but not too noticeable unless you've seen it beforehand.
I'm diggin' the cork look!