Related
Hi all people,
first of all, I want excuse me for not my perfect English.
I have Honor 9 from few days. And I think to have bricked it.
I have unlocked bootloader correctly.
I have flashed recovery this TWRP recovery with the intention to proceed to root with Magisk or SuperSu. I accidentally and unconsiuosly do factory reset then the phone goes bootloop. (it power off and power on continuously) with the alert "your device has been unlocked and..etc".
Yesterday, reading this thread, I flashed, from fastboot console, boot, recovery and system, the phone resets two/three times then goes to eRecovery where I do a factory reset.
After a factory reset the phone works correctly and seems successfully unbricked. So I re-flash TWRP recovery.
But this morning, during the attempt to install from TWRP one between Magisk or SuperSu (I don't succeed to do it beacuse the phone was crypted and I don't see zip files from TWRP). I have reset the phone but goes bootloop again.
I tried to re-flash boot, recovery, system and cust more (that I don't have flashed yesterday). Now the phone goes eRecovery and ask me to connect to download latest version and recovery, but don't ask me to do a factory reset.
Now I don't know what I can do.
How I can solve this situation? I want only unlock bootloader (done!), install TWRP and have root permission. Now I don't think to change rom.
Something similar happened to me. It seems like the TWRP provided has some issue..... After installing TWRP I had a bootloop problem. I have resolved installing Magisk. It seems that Magisk patchs something. If you can access TWRP try to install Magisk (put the zip file on external sd). In other words: copy magisk zip on sd card - during the bootloop you have the chance to power off phone - Power off - Power on in recovery mode. If you have TWRP correctly installed Honor should go in recovery using TWRP . Install Magisk and see what happens...
unvisigoth said:
Something similar happened to me. It seems like the TWRP provided has some issue..... After installing TWRP I had a bootloop problem. I have resolved installing Magisk. It seems that Magisk patchs something. If you can access TWRP try to install Magisk (put the zip file on external sd). In other words: copy magisk zip on sd card - during the bootloop you have the chance to power off phone - Power off - Power on in recovery mode. If you have TWRP correctly installed Honor should go in recovery using TWRP . Install Magisk and see what happens...
Click to expand...
Click to collapse
I have tried to flash TWRP recovery again to do install Magisk from sd card. I have done it but the phone doesn't work fine.
So I have put rommco05 TWRP Backup into sd card then restored it from TWRP restore (boot and vendor img). Now the phone seems have bootloader locked, in fact I don't have bootloader warning at the power on. Now in fastboot mode the phone says me that I have Phone locked and FRP unlocked.
How can I exit from this situation?
Try this
Killus3 said:
Hi all people,
first of all, I want excuse me for not my perfect English.
I have Honor 9 from few days. And I think to have bricked it.
I have unlocked bootloader correctly.
I have flashed recovery this TWRP recovery with the intention to proceed to root with Magisk or SuperSu. I accidentally and unconsiuosly do factory reset then the phone goes bootloop. (it power off and power on continuously) with the alert "your device has been unlocked and..etc".
Yesterday, reading this thread, I flashed, from fastboot console, boot, recovery and system, the phone resets two/three times then goes to eRecovery where I do a factory reset.
After a factory reset the phone works correctly and seems successfully unbricked. So I re-flash TWRP recovery.
But this morning, during the attempt to install from TWRP one between Magisk or SuperSu (I don't succeed to do it beacuse the phone was crypted and I don't see zip files from TWRP). I have reset the phone but goes bootloop again.
I tried to re-flash boot, recovery, system and cust more (that I don't have flashed yesterday). Now the phone goes eRecovery and ask me to connect to download latest version and recovery, but don't ask me to do a factory reset.
Now I don't know what I can do.
How I can solve this situation? I want only unlock bootloader (done!), install TWRP and have root permission. Now I don't think to change rom.
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-9/help/bootloader-locked-help-to-enable-usb-t3683145
Rommco05 said:
Again unlock bootloader
Click to expand...
Click to collapse
I have unlocked bootloader again and do a factory reset from TWRP recovery, now the phone seems works correctly!!!:good:
Now I should try to root the phone with Magisk or SuperSu, right?
I have a question about TWRP. From TWRP's file manager I don't see the files that I put in the internal memory. It's because I have used finger print to lock the phone that encryptes files?
raw_jay said:
https://forum.xda-developers.com/honor-9/help/bootloader-locked-help-to-enable-usb-t3683145
Click to expand...
Click to collapse
This is to re-brand the phone from Chinese to EU version...I don't think is my case.
Rommco05 said:
Take a backup before make root. You don't see files because is some issue with decryption in TWRP. I achieved root with Magisk but I don't remember exactly steps
Click to expand...
Click to collapse
I think it's too late
Anyway I can re-flash all thing from begin.
Then I can't use TWRP with the phone encrypted ( PIN, password, fingerprint, etc...) ?
Rommco05 said:
I'm not sure about thatz Huawei roms are encrypted somehow by default
Click to expand...
Click to collapse
After I have installed Magisk (v14.0) now I have problem with google play services which don't download and do updates apps.
If I do a factory reset again I can solve it?
Update:
After I done a factory reset from TWRP recovery
and formatting data partition the phone seems working perfectly (I don't know why, but before format data the phone says me that I have only 150mb of memory space)
I say "seems" because there's something getting me in trouble, for example, I don't have anymore ringtones in the settings menu.
And I don't know if I have lost something else.
Exists a possibilty to restore all contents of the phone?
You could try this and flash your phone back to stock. But then you would need to unlock your bootloader and install TWRP again. Another way would be to unpack an image of your ROM and flash system and other parts via fastboot. Of course this could be risky and you could brick the device.
Meranico said:
You could try this and flash your phone back to stock. But then you would need to unlock your bootloader and install TWRP again. Another way would be to unpack an image of your ROM and flash system and other parts via fastboot. Of course this could be risky and you could brick the device.
Click to expand...
Click to collapse
If I understand it well...
I have 2 options:
1) Rebrand the phone and flashin, then at end I have back the phone stock.
2) Unpack the image of ROM (what it means?) and flash system and other parts via fastboot. (Which are those parts? How?) But this procedure is more hazardous then rebrand procedure?
I have understand right?
1. Yes, correct. I would recommend that. Everything is explained in the thread I linked. Of course everything you do could potentially harm your phone, but you should know that already.
2. Get an update.app file for your specific phone model (there are threads already here, just search a bit, or use Firmware Finder), open it with the Huawei Update Extractor and extract the parts you want to flash (like system or recovery). Then flash them via fastboot. I tried this because I was in a situation like yours, but it didn't work for me. But in theory it could, because you would replace the faulty parts of your firmware.
Killus3 said:
I have understand right?
Click to expand...
Click to collapse
Could you solve your problem?
Meranico said:
Could you solve your problem?
Click to expand...
Click to collapse
Hi, I don't say it because I have replaced the phone with another same.
Now I'm starting to unlock bootloader, installing recovery TWRP and rooting the phone.
I hope to avoid bootloop this time.
Goodmorning everyone!
Yesterday I have:
- Unlocked bootloader correctly!
- Installed TWRP correctly!
- Make a TWRP Backup of all partitions of the device, except data partition because TWRP gives me an error during backup attempt.
- Then I start the device.
- After start the device I go to recovery TWRP to install Magisk, but the phone goes bootloop.
After reboot 2-3 times on the screen appears for a few moments a message of eRecovery that have restored something but I don't know. Then the device shows me the eRecovery that asks me to make a factory reset.
At this point I shutdown the device, go in TWRP to flash Magisk unistaller and the device goes out bootloop and works fine but without root.
How I can solve this problem and install Magisk and have root finally?
Some question:
-When I flashed TWRP (via fastboot) and I configurate it, example language, hours, etc... TWRP don't save the settings, in fact when I go in TWRP again I do remake the settings. Why?
-Then I go in sdcard I don't navigate files, I see folders with casual characters. This is an effect of encryption of the device?
Killus3 said:
Goodmorning everyone!
Yesterday I have:
- Unlocked bootloader correctly!
- Installed TWRP correctly!
- Make a TWRP Backup of all partitions of the device, except data partition because TWRP gives me an error during backup attempt.
- Then I start the device.
- After start the device I go to recovery TWRP to install Magisk, but the phone goes bootloop.
After reboot 2-3 times on the screen appears for a few moments a message of eRecovery that have restored something but I don't know. Then the device shows me the eRecovery that asks me to make a factory reset.
At this point I shutdown the device, go in TWRP to flash Magisk unistaller and the device goes out bootloop and works fine but without root.
How I can solve this problem and install Magisk and have root finally?
Some question:
-When I flashed TWRP (via fastboot) and I configurate it, example language, hours, etc... TWRP don't save the settings, in fact when I go in TWRP again I do remake the settings. Why?
-Then I go in sdcard I don't navigate files, I see folders with casual characters. This is an effect of encryption of the device?
Click to expand...
Click to collapse
Answers to all your concerns go here mate---> TWRP doesn't decrypt data. Done.
Hence: weird folders in there, nowhere to store its settings prefs, about Magisk it's another story, if you want root go SuperSU latest beta.
Regards.
a basically did what that guy did, got root installed via TWRP but my google apps are all busted.
I tried flashing the update_data_full_public.zip and update_full_hw_usa.zip I found using the russian device lookup link switching trick but I the HW errored when I tried to flash it in TWRP and my play store still broken.
It's a tale as old as time. I have a functioning A3 with TWRP and magisk installed. OTA Jan security update failed. "Installation problem" was all it said. I expected this. I think all my magisk mods are systemless but I did flash a custom kernel in TWRP to get kcal.
Ok I'd gone through this for the December update. I downloaded fastboot ROM and extracted the boot.img. I made sure it was correct. Laurel sprout V10.3.13.0.PFQEUXM. But flashing it with either TWRP or fastboot I got the dreaded error screen on reboot where your options are try again or factory reset. Yes I flashed into the active slot. Even when I chose to factory reset and started fresh, I still got the same error when I tried to update.
I also tried to flash boot+system but also got same corrupted error. I tried using flash_all_except_data_storage but got an antirollback error. I've gone back to a nandroid backup for now but obviously I need to get this sorted out before the Android 10 update.
Any ideas? Thanks
Mi A3 doesn't have anti rollback mechanism as far as I know. If you installed TWRP, you also most probably enabled "allow system modifications" (there is a one time prompt on the first start of TWRP, pretty much everyone just dismisses it without reading). TWRP remembers this setting and for each subsequent boot into TWRP it automatically mounts system as R/W, breaking OTA even if you don't flash anything.
You need to reflash stock fastboot images for boot and system with the same version as you're currently running. If you are getting data corruption error, it usually happens when you flash system image from incorrect region or versions differ too much (you're flashing too old image).
Don't install TWRP (or make sure that you delete its settings first and then do NOT allow system modifications).
As you already performed a factory reset, I'd start from fresh state again - switch to active slot A and reflash whole ROM from fastboot, including data wipe (flash_all.bat if I'm not mistaken, but I don't have it in front of me, so double-check its content that it doesn't lock your bootloader).
Hello,
Is it possibly to OTA Update a rooted Nord2 5G (DN2103) without TWRP without data loss ?
I rooted it with patched magisk boot image with DN2103_11_A.14 found here on XDA.
Tried OTA update for SN2103_11.A.16 from the phone menu, but got error from updater:
"Could not update: Verification problem" (translated by me, the original english message may be different)
I reverted to stock boot.img but the update fail again with the same error.
Now I am back with the magisk's patched one with root.
Which scenarios I have to update to the A.19 without lost data and without need to install TWRP.
Thanks.
Updated: March 28, 2022
Perhaps I am a bit late to respond, but for future users running into this issue (including myself lol), you first need to install TWRP, otherwise the following instruction won't work. Since you're rooted, you can install TWRP as well (and its really not hard to do)
for DN2103 you have to download the OTA update zip, boot image and vbmeta, see:
[STOCK][DN2103][EU] Incremental update packages & Boot images
Hi All, Below you can find a couple of incremental update packages that you can use for updating from various versions of your device. Incremental update packages These can be installed using TWRP by following this tutorial...
forum.xda-developers.com
After you downloaded the correct files, do the following:
boot into TWRP and flash the boot image corresponding to your update.
(optional) by flashing the boot image, you lose root. to prevent that, you can patch the boot image first with the magisk app. you can always do this step after updating, in case you forget it.
!!! some updates do not have boot image.
flash the <ota_update>.zip
flash the vb.meta image
reboot phone normally
Also, before doing all this, i recommend (temporarily) turning lockscreen security off, in case something goes wrong, you can always recover data then since the phone won't be encrypted.
Thank you, for the answer.
This is the correct way to do update.
Best,
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
You have to be decrypted or flash DMverity for A12. I assume You mean Magisk 24.1 the current version is 24.3
Hi. This is what I did:
I downloaded and installed original firmware through fastboot (fastboot was still on).
I also installed original recovery through fastboot.
After that my oneplus 5t was in stock condition, apart from the bootloader, which was unlocked.
After that I managed to install TWRP through fastboot, and then lineage 19.
The thing is that TWRP doesn't support lineage 19, for one reason or another. Or it could be the other way around (lineage 19 doesn't support TWRP). In any case I had a phone which would only go in fastboot mode.
At least I knew what to do, as I did it already: reinstall stock firmware and recovery.
Long story short, I installed LOS recovery and lineage 19, and everything works fine.
Thanks everyone, and especially thaidroid, for the support.
Have a nice day.
miclombardo said:
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
Click to expand...
Click to collapse
Its not working cus you need to format data in recovery and then reboot it.
kirknado18 said:
Its not working cus you need to format data in recovery and then reboot it.
Click to expand...
Click to collapse
It wont boot cus your encrypted formatting data will allow op5t to boot.
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
paradoxiumwind said:
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
Click to expand...
Click to collapse
What recovery are you on? TWRP?
I use the one posted alongside each version: https://download.lineageos.org/dumpling
can you help?
I need to root so I can titanium backup everything. but I can't root. I suspect I might need to fully format and wipe and start again, I tried wiping data and doing a fresh install, but after sideloading magisk it just fails to boot every time now.
Does it boot regularly BEFORE installing magisk? I am trying to define the source of the problem.
I have installed lineage 19 and magisk, and I confirm you that it's possible
Yes. It boots fine if I just install lineage then nevermindthegapps. problem only occurs if I flash magisk. I tried installing the .apk and patching the .boot image manually in it and then fastboot flashing that, but same thing.
oh - one possible thing that it may be - is that I had a couple of modules loaded (I think a gcam fix mod and something similar) in magisk, and I read somewhere about people having them stuck 'installed' despite demoving all traces of magisk app. whether that is the problem I don't know.
This is very strange. That's what I did:
Sideload lineage recovery
Sideload lineage 19
Download magisk apk
Patched boot image from lineage 19.zip
Sideload the patched boot image
And that's it it all worked
May I suggest you to start all over again?
is wiping system data sufficient or do I need to format it? I'd rather not lose my appdata- but I can't rescue it without root / titanium backup :/
Try first without formatting, and see how it goes
I wiped system/cache, installed lineage-19.1-20220719-nightly-dumpling-signed.zip / mindthegapps, phone booted up fine - rebooted fine.
ok, good. Now download latest magisk app and patch the boot img.
do I click patch vbmeta in image?
Yes.
First extract the file called boot.img from lineage.zip you just installed.
Then in magisk select "patch vbmeta in image".
Magisk should produce a file named something like " magisk_pached-24300_f41h3.img".
That patched file should be sideloaded.
Installation is explained really well by topjohnwu
it wouldn't flash without selecting vbmeta, so tried with, flashed it, now i'm sitting looking at the boot logo.
Hi there,
I ****ed up and I'm now stuck in bootloop with no access to a computer and was wondering if I could do anything to solve my issue.
I've been testing blu spark kernel for months and wanted to go back to stock kernel.
I flashed my backup from FKM (made it with FKM too) and now I'm in bootloop.
My backup was from january build and my phone has been updated to february build since. Is it the reason of the bootloop ?
Anyway, I'm in a bootloop now and I only have an other rooted Pixel 6.
Can I do anything with it ?
I tried Android Flash Tool from Google within Chrome but the download of the rom is always stucked at some point.
I tried magisk adb module but I'm afraid it's not up to date as I'm still in fastboot after I flashed the bootloader and update the image.
Any ideas ?
First try to turn off your phone and then reboot to bootloader. Download factory image and launch flash-all.bat.
Sorry for your datas.
I haven't been able to launch flash-all.sh with termux with the second Pixel 6 I have as the fastboot version from the magisk module is too old.
I don't have a computer to do it.
bobby8921 said:
I haven't been able to launch flash-all.sh with termux with the second Pixel 6 I have as the fastboot version from the magisk module is too old.
I don't have a computer to do it.
Click to expand...
Click to collapse
Get a computer, or at least borrow one so you can restore your device using Google's flash tool. You're not fixing your bootloop without one.