To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Realme X2 Pro can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Quick isn't the word. It's amazing seeing how fast it charges.
Can it be charged with a 5 volt charger?
I think I have a problem with fast charging.
Yesterday while the phone was charging, electricity in my house was shutted down. When it came back, I can see than now, I charge 1 % on 35 seconds, instead of 20 sec before.
Could it have the battery damaged ? I doubt so, buty it's strange.
I tried when battery was 82%
Maybe it's quicker when battery is low ?
What's your thoughts about this situation ?
Thanks !
Edit : Okay, after 85% it slows down, but before it's okay
ManuBBXX said:
I think I have a problem with fast charging.
Yesterday while the phone was charging, electricity in my house was shutted down. When it came back, I can see than now, I charge 1 % on 35 seconds, instead of 20 sec before.
Could it have the battery damaged ? I doubt so, buty it's strange.
I tried when battery was 82%
Maybe it's quicker when battery is low ?
What's your thoughts about this situation ?
Thanks !
Edit : Okay, after 85% it slows down, but before it's okay
Click to expand...
Click to collapse
Yeah it slows down towards the end I'll go from 0-99 in 28-30 min then takes some time sometimes to get the last 1%. Battery life is also incredibly good.
chipcamel said:
Yeah it slows down towards the end I'll go from 0-99 in 28-30 min then takes some time sometimes to get the last 1%. Battery life is also incredibly good.
Click to expand...
Click to collapse
Wrong screenshot
chipcamel said:
Wrong screenshot
Click to expand...
Click to collapse
Yeah battery life is outstanding..
Anyway, I have a little weird thing :
This battery monitor stats shows me different SOT than GSAMBatteryMonitor.
GSAM shows 2 hours more (wich I think wrong), and this delay grows while battery dercreases.
Do you have this app showing the same stats than colorOS battery monitor ?
ManuBBXX said:
Yeah battery life is outstanding..
Anyway, I have a little weird thing :
This battery monitor stats shows me different SOT than GSAMBatteryMonitor.
GSAM shows 2 hours more (wich I think wrong), and this delay grows while battery dercreases.
Do you have this app showing the same stats than colorOS battery monitor ?
Click to expand...
Click to collapse
I just downloaded the app you're talking about give me a day or so I'll give you an update
50W Charge is impressive can't wait to get in hands.
Can you disable fast charge (like in samsung galaxy note 9)?
What time does it take to reach 100 from 0?
ManojKing said:
What time does it take to reach 100 from 0?
Click to expand...
Click to collapse
Usually 28 minutes and a maximum of 35
labib2002 said:
Usually 28 minutes and a maximum of 35
Click to expand...
Click to collapse
Yes it's really fast
Greetings.
I got my X2 Pro about 2 days ago. Charging speed is even better than advertised, as it takes less than 30 minutes to reach full charge. But phone usually gets too hot when fast charging. Do I experience this problem alone or do you guys too? Kinda worried about battery health in the long run if it gets too hot everytime I charge it.
Thanks before
reyhanjuala said:
Greetings.
I got my X2 Pro about 2 days ago. Charging speed is even better than advertised, as it takes less than 30 minutes to reach full charge. But phone usually gets too hot when fast charging. Do I experience this problem alone or do you guys too? Kinda worried about battery health in the long run if it gets too hot everytime I charge it.
Thanks before
Click to expand...
Click to collapse
Same thing here, so I don't charge more than 40 - 45% at a time.
If my battery is below 50%, I charge in 2 times with a 10 min pause.
Doing sop, you don't reach hoptter than 33 degrees instead of 38+
I can't seem to get a decent standard charging from 5V 2A chargers or Powerbanks, even a QC3 Powerbank only delivers 0,9-1A.
I only get about 900mA according to the Ampere-App. {On the contrary, I even get 1,8A from the original wall plug at 80% SoC).
Do you also struggle?
devilgenius said:
Can you disable fast charge (like in samsung galaxy note 9)?
Click to expand...
Click to collapse
I tried to use a 5 watt charger, and it works. Been searching in settings for an option to disable fast charging, but I can't find one.
---------- Post added at 09:07 AM ---------- Previous post was at 09:04 AM ----------
Polarfuchs said:
I can't seem to get a decent standard charging from 5V 2A chargers or Powerbanks, even a QC3 Powerbank only delivers 0,9-1A.
I only get about 900mA according to the Ampere-App. {On the contrary, I even get 1,8A from the original wall plug at 80% SoC).
Do you also struggle?
Click to expand...
Click to collapse
Same here. I used a 9V 2A charger, and it won't go more than 1100mA.
I wonder if this is a detection error from the apps. I think they don't consider the dual battery layout and only display half of the true value.
The error that the app "charger tester" shows let's me think this or does support my theory.
All apps seem to not be able to show the correct current flow because of the dual-batteries.
I found the engingeering mode and can confirm that the phone charges with 5V 2A on dumb chargers.
And also supports QC 18W with 9V 2A
As well as the Oneplus 20W Dash charger with 5V 4A.
Polarfuchs said:
I can't seem to get a decent standard charging from 5V 2A chargers or Powerbanks, even a QC3 Powerbank only delivers 0,9-1A.
I only get about 900mA according to the Ampere-App. {On the contrary, I even get 1,8A from the original wall plug at 80% SoC).
Do you also struggle?
Click to expand...
Click to collapse
physixthegreat said:
I tried to use a 5 watt charger, and it works. Been searching in settings for an option to disable fast charging, but I can't find one.
---------- Post added at 09:07 AM ---------- Previous post was at 09:04 AM ----------
Same here. I used a 9V 2A charger, and it won't go more than 1100mA.
Click to expand...
Click to collapse
Super VOOC (and also VOOC) have their own protocol of charging mechanism. It's not the same with other quick charge method like Quick Charge 3.0.
You will not have VOOC charging if you are not using right adapter and right cable. You try use Super VOOC charge with other USB cable, VOOC charging will not work.
So when you using other adapter or cable, you'll got standard 5V charging max 2A.
Related
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the honor 5X can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Takes almost 2 hours with me using a 2.1a fast charger
prateek57 said:
Takes almost 2 hours with me using a 2.1a fast charger
Click to expand...
Click to collapse
if you have gsm battery app you can see that the phone cannot accept 2.1A,
it's the big cons indeed!
Takes 2h20m from an Anker IQ 2.4A charger (1-100%) With the stock 1A charger it takes 3+ hours.
I just got mine and it charges much faster with a 2 amp charger. I am using a 5 port Aukey with one port that has the Qualcom fast charge 2.0.
I also have a Blu VIVO 5 and the Honor charges just as fast as that with the 2 amp charger. The Blu Vivo 5 includes a 2amp in the box while the honor does not.
On my HTC One and my Sony Xperia Z3 compact, https://play.google.com/store/apps/details?id=com.gombosdev.ampere reports something in the neighborhood of 1.4-1.7 amperes with a Quick Charge 2.0 charger, and I go from 1% to 60% in about 20-30 minutes as claimed. On my Honor 5X, the highest I see the app report is 850 mA, and it takes about as long as what everyone else is reporting. With a non-Quick Charge charger I get about 550 mA.
Edit: 850 mA is what I often see using one of my chargers. I'm using a different one right now and just now I saw it as high as 1.1 A.
Using an USB multimeter I can see it charge at 1A with my Blitzwolf 5 ports charger.
Honor 5x L22 model take around 3 hours to charge from 0-100%.
Wish they would enable Qualcomm Quick Charge tech for this device since the Chinese market version has it by default. It takes quite a while to charge from 0-100
Good speed with the normal 2 Amp charger. reaches 100% in and around 2hrs
Quite slow
upto the mark
Coming from a fast charging phone, honor 5x is quite slow. But it is OK as i use the phone normally so from 100 to 0 it last easily 2 days.
Sent from my KIW-L21 using XDA-Developers mobile app
yep they should have used some sort of quick charge
0-100% takes 2 and a half hours usually.
2hours with 2A charger
It's still very slow
Plus side is slower charge will keep your battery in better health and longer lifespan . fast charge is real harsh on the battery pack .
I find mine takes almost 3 hrs from about 5% to full when on and 4G running . You can get 60% in an hr or less which not bad .
Mister B said:
Plus side is slower charge will keep your battery in better health and longer lifespan . fast charge is real harsh on the battery pack .
I find mine takes almost 3 hrs from about 5% to full when on and 4G running . You can get 60% in an hr or less which not bad .
Click to expand...
Click to collapse
VOOC from Oppo is the most efficient.
2 hours average from 5-100% on stock charger.
Hi i just purchased from Amazon Samsung Fast Charge Wireless Charging Stand EP-NG930TBUGUS
And in fast charge mode it fully charges phone about in 3 hours about 5% in 10 minutes!
Is it correct?
Have you activated fast charge in the settings of tour phone? It's under Battery
Xophile said:
Have you activated fast charge in the settings of tour phone? It's under Battery
Click to expand...
Click to collapse
Yes its activated.
It is not normal this time?
SUNUN said:
Yes its activated.
It is not normal this time?
Click to expand...
Click to collapse
did you use it with orig s7 wall charger + orig cable? My result is 135 mins from 0% to full. If you have too thick case that will ruin the charging.
almaalma74 said:
did you use it with orig s7 wall charger + orig cable? My result is 135 mins from 0% to full. If you have too thick case that will ruin the charging.
Click to expand...
Click to collapse
yes all is original. without case the same result.
about 145 minutes in fast wireless charge on mine from 2% to 100%; but i have 4000Mah S7 Active not 3000mah s7 or 3500mah s7 edge. also tpu case but does not affect charge time
5% in 10 minutes at which battery level?
Did you have the display on our use the phone while charging?
maik005 said:
5% in 10 minutes at which battery level?
Did you have the display on our use the phone while charging?
Click to expand...
Click to collapse
battery monitor shows that every 10 minutes my phone charges 5%, no display is off only AOD is on didn't using the phone.
Did you position the phone till it show "fast charging wirelessly"?
vyis said:
Did you position the phone till it show "fast charging wirelessly"?
Click to expand...
Click to collapse
Yes sure
It is not Fast charging wirelessly.
mAh should be at least 1500 up to about 80 or 90 percent
maik005 said:
It is not Fast charging wirelessly.
mAh should be at least 1500 up to about 80 or 90 percent
Click to expand...
Click to collapse
and how to fix it?
Does ist say fast wireless charging or only wireless charging when you look on the lockscreen?
maik005 said:
Does ist say fast wireless charging or only wireless charging when you look on the lockscreen?
Click to expand...
Click to collapse
yes yes
Did you try to Plug in the usb cabel direct into the phone?
How fast does it charge then and does it say fast charging then?
maik005 said:
Did you try to Plug in the usb cabel direct into the phone?
How fast does it charge then and does it say fast charging then?
Click to expand...
Click to collapse
Yes and it charges device very fast.
Even with cabel directly plugged in it DOES NOT do FAST Charging. It should be over 2200 mA
---------- Post added at 09:11 ---------- Previous post was at 09:10 ----------
But only if the screen is off. With screen on it does charge only at 1000mA max
I am having the exact same problem. will be going down to Samsung service store tmr.
fast wireless charging takes 3-4 hours to full charge.
direct micro USB fast charging takes around 1.5 hours.
Yes, it did show FAST wireless charging.
xheavenic said:
I am having the exact same problem. will be going down to Samsung service store tmr.
fast wireless charging takes 3-4 hours to full charge.
direct micro USB fast charging takes around 1.5 hours.
Yes, it did show FAST wireless charging.
Click to expand...
Click to collapse
pls inform us when you will fix issue.
Cable fast charging is ok for me too. Only wireless is problem.
Hi, I'm using the 4x snapdragon, with the final Resurrection rom.
Can someone recommend a good kernel with quick charge and works alongside this rom?
Thanks in advance.
oXydead said:
Hi, I'm using the 4x snapdragon, with the final Resurrection rom.
Can someone recommend a good kernel with quick charge and works alongside this rom?
Thanks in advance.
Click to expand...
Click to collapse
The Xiaomi Redmi Note 4(X) doenst support Quick Charge!
Snapdragon 625.
I recall that the chip does and xiaomi within the kernel restricted that.
oXydead said:
Snapdragon 625.
I recall that the chip does and xiaomi within the kernel restricted that.
Click to expand...
Click to collapse
No they did not, it's not kernel related but the charging board and battery that are not compatible.
Thanks for the info.
Why so obsessed to quick charge?
It's not much faster than the regular charge.
Quick charge enabled phone charge the 3000mah battery in 1.5hours... If the battery is larger 4000mah, it will takes approximately 2 hours to charge.
RN4 regular charge is about 2 hours 15mins... Its just 15 minutes longer and if we usually charge it overnight, its nothing difference... you want to take the unknown risk?
666dsa666 said:
No they did not, it's not kernel related but the charging board and battery that are not compatible.
Click to expand...
Click to collapse
Are you sure? Source? Or do you mean that they are not rated for QC?
aabenroi said:
you want to take the unknown risk?
Click to expand...
Click to collapse
Yes!
We do all sort of things with our devices that are outside of "safe use". We overclock and overvolt them, flash stuff that could potentially brick them, etc.
As to why? I wouldn't charge the device from 0-100 with QC enabled but i sure as hell would like to charge it for 5 min and get 20-30%
If QC could be enabled it has to be tested sure, maybe it wouldn't be a good idea with an ambient T of 30C maybe the cut of point would be 60% or 20min. But yes I would like to test it.
Peace
ready for dwialli bomb?
Aletheia said:
Are you sure? Source? Or do you mean that they are not rated for QC?
Yes!
We do all sort of things with our devices that are outside of "safe use". We overclock and overvolt them, flash stuff that could potentially brick them, etc.
As to why? I wouldn't charge the device from 0-100 with QC enabled but i sure as hell would like to charge it for 5 min and get 20-30%
If QC could be enabled it has to be tested sure, maybe it wouldn't be a good idea with an ambient T of 30C maybe the cut of point would be 60% or 20min. But yes I would like to test it.
Peace
Click to expand...
Click to collapse
When it comes to play the electricity, the risk isn't your phone brick but bomb...
And it will nowhere near 20-30% in 5 minutes.
LG G5 that have QC 3.0 enabled charge around 10% in 5 minutes. its with 2800mah battery, faster usb-c, etc...
What's the battery charging rate with a stock charger? My stock charger gives 1300mah at 70% and a Blitzwolf QC 3.0 gives 1700mah at 70%.
aabenroi said:
When it comes to play the electricity, the risk isn't your phone brick but bomb...
And it will nowhere near 20-30% in 5 minutes.
LG G5 that have QC 3.0 enabled charge around 10% in 5 minutes. its with 2800mah battery, faster usb-c, etc...
Click to expand...
Click to collapse
Well sure it won't be for every one, there is a real risk of the battery catching fire (bomb is a bit hyperbolic) . That's why IF it's possible people willing to take the risk have to test it out. Some might think it's worth the risk though.
My admittedly rusty back of the napkin math says it should be theoreticly possible to get 20% With 20V and 3.6A in less than 7 min.
portgasfire said:
What's the battery charging rate with a stock charger? My stock charger gives 1300mah at 70% and a Blitzwolf QC 3.0 gives 1700mah at 70%.
Click to expand...
Click to collapse
1-80 should be close to 2000mah.
I have 2 rn4, comes with different stock charger.
EU and US plug
Stock charger with EU plug, charge about 1400-1600mah
Stock charger with US plug, charge about 1800-1900mah
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
Aletheia said:
Well sure it won't be for every one, there is a real risk of the battery catching fire (bomb is a bit hyperbolic) . That's why IF it's possible people willing to take the risk have to test it out. Some might think it's worth the risk though.
My admittedly rusty back of the napkin math says it should be theoreticly possible to get 20% With 20V and 3.6A in less than 7 min.
Click to expand...
Click to collapse
Wow thats much quicker than op5 dash charge :good:
As I know Jun ao kernel is support qc 3.0
aabenroi said:
Why so obsessed to quick charge?
It's not much faster than the regular charge.
Quick charge enabled phone charge the 3000mah battery in 1.5hours... If the battery is larger 4000mah, it will takes approximately 2 hours to charge.
RN4 regular charge is about 2 hours 15mins... Its just 15 minutes longer and if we usually charge it overnight, its nothing difference... you want to take the unknown risk?
Click to expand...
Click to collapse
you are wrong,
RN4 snapdragon need 3 hour 5m for fully charged (10~100%) with 5V2A charger
and the advantage of QC is they charge very fast in 0~70% (about 30min only) then slower until 100% (max 1H 40m total)
aerialus said:
you are wrong,
RN4 snapdragon need 3 hour 5m for fully charged (10~100%) with 5V2A charger
and the advantage of QC is they charge very fast in 0~70% (about 30min only) then slower until 100% (max 1H 40m total)
Click to expand...
Click to collapse
Oh please, 0-70% in 30 minutes?
Read here buddy: https://www.androidauthority.com/oneplus-5-galaxy-s8-battery-charge-781682/
Congratz.... You found better technology than OP5 dash charge and you don't need the fancy usb-c.
I just measured my RN4 charge speed
0-90 : less than 2 hour
90-100 : you need 45 minutes
aabenroi said:
Oh please, 0-70% in 30 minutes?
Read here buddy: https://www.androidauthority.com/oneplus-5-galaxy-s8-battery-charge-781682/
Congratz.... You found better technology than OP5 dash charge and you don't need the fancy usb-c.
I just measured my RN4 charge speed
0-90 : less than 2 hour
90-100 : you need 45 minutes
Click to expand...
Click to collapse
I can say that because i have zenfone 2 with Quick charge support bro,, my zen2 only need 30m~40m from 10% to 60~70%
And can you upload log battery from 0~100 ?
Because i have 2 mido and all need 3hour for fully charge,, check my prove in attachment (log battery charge mido)
My friends also need +-3H for fully charged reno4
aerialus said:
I can say that because i have zenfone 2 with Quick charge support bro,, my zen2 only need 30m~40m from 10% to 60~70%
And can you upload log battery from 0~100 ?
Because i have 2 mido and all need 3hour for fully charge,, check my prove in attachment (log battery charge mido)
My friends also need +-3H for fully charged reno4
Click to expand...
Click to collapse
Well my sister has a zen 2 too... It's not quick charge..
Quick charge is qualcomm tech, zen 2 have intel on it.
And zen2 just have 3000mah battery on it, mido is 4000mah capacity... It's 25% larger. Its totally different...
Before using mido, I was using mi5s that have QC 3.0, with legit 3.0 charger and usb-c, its no way 60-70% in 30 minutes.
Well I have 2 mido, come with 2 different stock charger. One is RN4 global, with EU plug... Yes it will need about 3 hours to charge. One is RN4x, come with chinese charger. It need 2.5 hours to top... 2 hours will get you from 10 to anywhere between 10-90+%, the last 10% is very slow...
Will provide logs later, because I've fully charged my phone this morning and still have 78% left this afternoon.
I've measured this morning charge... Start from 17% to 90% takes 100 minutes.
Note 4 takes less than 2 hours for full charge 10-100%. Just don't use the phone while charging.
Sent from my Redmi Note 4 using Tapatalk
Yeah, need at least 2hours to charge from critical value to 90 percent, as my experience fully charge ur phone is bad (i prefer to charge till 95 to 97 percent) furthermore the screen on time is the same.
Sent from my Redmi Note 4 using Tapatalk
aerialus said:
I can say that because i have zenfone 2 with Quick charge support bro,, my zen2 only need 30m~40m from 10% to 60~70%
And can you upload log battery from 0~100 ?
Because i have 2 mido and all need 3hour for fully charge,, check my prove in attachment (log battery charge mido)
My friends also need +-3H for fully charged reno4
Click to expand...
Click to collapse
As request, this is my charge logs....
Yours from 10%... 1 hour charge = 39%
While mine from 10%... 1 hour charge = 58%
Sorry, I have many work to do and need my phone, so I can't do full charge now. You can see the graph, I have to use my phone while charging... Should be more than 58% if I do not use it
Hi guys! The phone is taking over 2hrs 30 mins to charge from 0 to 100% with the supplied 5V 2A charger. Is there any way to improve the charging time, considering this is very slow?
Not really as it doesn't support fast charge
Sent from my SM-G950F using Tapatalk
manojnagendra said:
Hi guys! The phone is taking over 2hrs 30 mins to charge from 0 to 100% with the supplied 5V 2A charger. Is there any way to improve the charging time, considering this is very slow?
Click to expand...
Click to collapse
yes that was a disappointment to me too... Previous phone was a Motorola Nexus 6 with fast charge, it was charging from 0 to 80% in like 30mn :-/
Will miss that. This said 8X battery really hold for 2 days, so just not forgetting to put it in charge one night every two and problem solved.
Well will using a 2.4A fast charger destroy the battery ?
For me charging:
- from 10% to 80% - 1h 5min..
- from 10% to 100% - 1h 59m..
Checked it by AccuBattery app.
I use 5V 2A/9V 2A oryginal charger. Only that my phone has 5000 mAh of capacity, not 3750 mAh. My phone Honor 8X Max support fast charge, Honor 8X does not support fast charge.
xero4zero said:
Well will using a 2.4A fast charger destroy the battery ?
Click to expand...
Click to collapse
No.
The phone selects the right battery charging.
manojnagendra said:
Hi guys! The phone is taking over 2hrs 30 mins to charge from 0 to 100% with the supplied 5V 2A charger. Is there any way to improve the charging time, considering this is very slow?
Click to expand...
Click to collapse
No.
Hardware limitation...
Ulfrik said:
This said 8X battery really hold for 2 days, so just not forgetting to put it in charge one night every two and problem solved.
Click to expand...
Click to collapse
I connect my phone to charger every about 10 days, but I use my phone only a little...
I didn't know the 8x does not have fast charging... I have the 8x max and it has fast charging at 9v 2A
The stock charger says it gives output of 18 watt . But in my case maximum ouput goes to 1.5-2 amp/3.5-4volts which is very less . It would be helpfull if anyone tells how to get 9volts or 12 volts.
Kriss21999 said:
The stock charger says it gives output of 18 watt . But in my case maximum ouput goes to 1.5-2 amp/3.5-4volts which is very less . It would be helpfull if anyone tells how to get 9volts or 12 volts.
Click to expand...
Click to collapse
Are you on stock rom or custom rom?
Stock
MIUI 11.0.9
If you are ok with rooting your device. I can tell you how to do so.
1. Root your device.
2. Install Advance charging control app(AccA) .
Link- https://f-droid.org/packages/mattecarra.accapp/
3. Give root permission.
Done.
(Don't install the magisk module app will work fine without it. The magisk module is installed and forget kind of module which you cannot modify to your own need)
Now you can set the speed you want (if your device suppots the spped you typed in it).
Its not just that, you can limit the charging % after which the charger automatically disconnects. I find it very helpful when i charge my device overnight. Automatically disconnects after 95%.
It also looks at your thermal of your battery. You can set your own temp % after which it starts cooling down by limiting the current/volt to the battery.
I personally suggest this app.
Thanks to @VR25.
Hope it works for you.
Thanks . Will try it.
Kriss21999 said:
Thanks . Will try it.
Click to expand...
Click to collapse
So, what was the maximum voltage you could set using Advance charging control app?
i.e what is the max voltage limit of poco f1
Also do you have any other charger than the stock one?
Charging cable issue?
Mine had issue with the charging cable.. tried with other charging cable it worked properly.. original charging xable got damaged witin 4 months of use..
besap18 said:
Are you on stock rom or custom rom?
Click to expand...
Click to collapse
Change cable, then change charger. Usually its either of those two. If it works, good. If not then it might be an issue with the software try to reflash (backup first). Worst case scenario it's the port
The issue is solved for me (Stock Rom ) . Bought new cable upto 3amp . Charged 87% in one hour (screen off) .
Tip : Keep the temperature below 35 degrees .
Xe1503 said:
So, what was the maximum voltage you could set using Advance charging control app?
i.e what is the max voltage limit of poco f1
Also do you have any other charger than the stock one?
Click to expand...
Click to collapse
I dint tried advance charging control ,Changing cable worked for me . And i have stock 18 watt charger , Maximum voltage goes upto 4.856.
Kriss21999 said:
I dint tried advance charging control ,Changing cable worked for me . And i have stock 18 watt charger , Maximum voltage goes upto 4.856.
Click to expand...
Click to collapse
How do you know the voltage is 4.856? Do you have usb meter?
Xe1503 said:
So, what was the maximum voltage you could set using Advance charging control app?
i.e what is the max voltage limit of poco f1
Also do you have any other charger than the stock one?
Click to expand...
Click to collapse
Don't know about other charges but i use stock charger and mine charges fully within 45-55 mins(0-100).
Stock charger brick is only fast charger 3 whereas our poco supports fast charge 4.
You can try ambrane or razer fast charger 4 brick for charging your device faster than stock charger
Xe1503 said:
How do you know the voltage is 4.856? Do you have usb meter?
Click to expand...
Click to collapse
Use Advance Charging control App. It gives you volts as well mAh speed by which your phone is charging or discharging.
Xe1503 said:
How do you know the voltage is 4.856? Do you have usb meter?
Click to expand...
Click to collapse
There are many applications on playstore to check.
Ex:- AMPERE , ACCUBATTERY
Kriss21999 said:
There are many applications on playstore to check.
Ex:- AMPERE , ACCUBATTERY
Click to expand...
Click to collapse
As I suspected, you're aren't aware what the ampere app is for.
Here take this for starters:
https://youtu.be/PvgLEii7f0w
The ampere app is for........amperes, it does not show charging voltage. It's the battery's voltage. Same is the case for accubattery.
I use Franco kernel manager app from playstore and it shows watts, which is at least somewhat believable.
I don't know about ACCA because it doesn't work without root and works on very specific phones.
Try with Franco kernel manager app(root not required) and check the watt.
---------- Post added at 07:45 PM ---------- Previous post was at 07:28 PM ----------
besap18 said:
Don't know about other charges but i use stock charger and mine charges fully within 45-55 mins(0-100).
Stock charger brick is only fast charger 3 whereas our poco supports fast charge 4.
You can try ambrane or razer fast charger 4 brick for charging your device faster than stock charger
Use Advance Charging control App. It gives you volts as well mAh speed by which your phone is charging or discharging.
Click to expand...
Click to collapse
You mean *1 hour* 45-55 mins(0-100)?
POCO F1 has 4000 mah, or 4.0 A * 3.7 v = 14.8 Wh, so if you charge your phone at 14.8 W for 1 hour then it will go 0-100%
or it will take 1 hour to charge your phone from 0% to 100% if you charge at a constant 14.8 watt. Which never happens, because hardware thermal throttling and software thermal throttling, after 30-50% the watts will go down, in the last 80-90% it will really be low. Even if you remove all thermal throttling and charge your phone in ice cubes, still because it's a 18 WATT QC 3 charger, it cannot charge in 45-55 mins.
What you're saying is most certainly impossible. Either that or your numbers aren't accurate, like it wasn't from 0-100% maybe 25-90% or it wasn't 45-55 min , maybe an hour and a half or you don't use the stock 18 watt qc 3 charger, or your battery is defective or you don't have a poco f1..
Xe1503 said:
How do you know the voltage is 4.856? Do you have usb meter?
Click to expand...
Click to collapse
Xe1503 said:
As I suspected, you're aren't aware what the ampere app is for.
Here take this for starters:
https://youtu.be/PvgLEii7f0w
The ampere app is for........amperes, it does not show charging voltage. It's the battery's voltage. Same is the case for accubattery.
I use Franco kernel manager app from playstore and it shows watts, which is at least somewhat believable.
I don't know about ACCA because it doesn't work without root and works on very specific phones.
Try with Franco kernel manager app(root not required) and check the watt.
---------- Post added at 07:45 PM ---------- Previous post was at 07:28 PM ----------
You mean *1 hour* 45-55 mins(0-100)?
POCO F1 has 4000 mah, or 4.0 A * 3.7 v = 14.8 Wh, so if you charge your phone at 14.8 W for 1 hour then it will go 0-100%
or it will take 1 hour to charge your phone from 0% to 100% if you charge at a constant 14.8 watt. Which never happens, because hardware thermal throttling and software thermal throttling, after 30-50% the watts will go down, in the last 80-90% it will really be low. Even if you remove all thermal throttling and charge your phone in ice cubes, still because it's a 18 WATT QC 3 charger, it cannot charge in 45-55 mins.
What you're saying is most certainly impossible. Either that or your numbers aren't accurate, like it wasn't from 0-100% maybe 25-90% or it wasn't 45-55 min , maybe an hour and a half or you don't use the stock 18 watt qc 3 charger, or your battery is defective or you don't have a poco f1..
Click to expand...
Click to collapse
Thanks for explaining , understood now.