Hello there,
So I tried to flash my phone to install custom ROM now the phone is dead. Currently, it bootloops in Orange State and I'm just able to access fastboot.
I tried downloading stock ROM and installing but it seems that those are corrupted and aren't working. Lastly, I tried downloading TWRP and installing but it seems that there is no official release. I tried downloading one from a website and installing but it was of no help.
>fastboot flash recovery recovery.img
Sending 'recovery' (13710 KB) OKAY [ 0.418s] Writing 'recovery' OKAY [ 0.324s] Finished. Total time: 0.785s
>fastboot boot recovery.img
Downloading 'boot.img' OKAY [ 0.373s] booting FAILED (remote: invalid ramdisk address: overlap with the download image) Finished. Total time: 0.454s
I'm out of ideas. Let me know if I'm wrong somewhere and if you guys have a twrp version that can run on this phone. Plus how to install it. It will be of great help if you guys can recommend a custom rom for this phone.
IFS-E528L-K100_V2.8B18_efuse
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Note : No matter what, never use "format all + download option". Else it may result in lose of IMEI number...
Related
Hello. Today i tried to flash the phone to the stock ROM twice but it didnt work probably cause unlocked bootloader and custom recovery (TWRP).
So i brick the phone and now i cant access the rom or the recovery. All i can do is access the fastboot mode. I tried to install the new recovery through fastboot but it doesnt work.
I tried the twrp 3.0.2.0 and 3.0.1.0 for yuga.
Code:
C:\Users\Kubo\Downloads\platform-tools>fastboot flash recovery recovery.img
target didn't report max-download-size
sending 'recovery' (10704 KB)...
OKAY [ 0.342s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.347s
Tried various of commands that i found on google and this forum but nothing worked. I unlocked the bootloader before when i was installing various of custom roms. Could somehow stock rom affect the bootloader when i was flashing through flashtool ? I tried to only boot the recovery from the img, the command worked but the recovery did not boot.
Code:
C:\Users\Kubo\Downloads\platform-tools>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.341s]
booting...
OKAY [ 0.033s]
finished. total time: 0.378s
Tried to check the status of bootloader but the command is just showing ... and nothing happend. Tried to get the IMEI through fastboot getvar command but no output is given. Im desperate. Sorry for english not my native language. I'll appreciate all the help.
Hi all,
I have an LG G5 H850. I'm trying to install TWRP using ADB. I've had it previously and it worked fine. I'm pretty sure the bootloader is unlocked. Anyway, when I do "fastboot flash recovery twrp-3.1.1.1-0-h850.img" I get the following output:
target reported max download size of 536870912 bytes
sending 'recovery' (19076 KB)...
OKAY [ 0.431s]
writing 'recovery'...
OKAY [ 0.345s]
finished. total time: 0.781s
To me, that looks as though thats worked fine. Now when I try fastboot boot twrp-3.1.1.1-0-h850.img I get the following:
downloading 'boot.img'...
OKAY [ 0.432s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.456s
Has anyone got any ideas on this?
Same here
I am having the same problem, please help
Had this issue a while back. I resorted to doing complete flash with LGUP to the latest version and then it worked. I had been messing around with various ROMS on different android versions.
lywyn said:
Had this issue a while back. I resorted to doing complete flash with LGUP to the latest version and then it worked. I had been messing around with various ROMS on different android versions.
Click to expand...
Click to collapse
Don't happen to know where I could get a rom that it would work with do you?
Managed to solve this. Flashed the TWRP image using fastboot flash recovery <img> via adb. Then I unplugged from USB, and got into recovery mode by doing power + volume down buttons and quickly release and repress ont he LG logo. Answered yes to both questions and got into TWRP.
Barsbeh said:
Managed to solve this. Flashed the TWRP image using fastboot flash recovery <img> via adb. Then I unplugged from USB, and got into recovery mode by doing power + volume down buttons and quickly release and repress ont he LG logo. Answered yes to both questions and got into TWRP.
Click to expand...
Click to collapse
That is the required way of doing it. You have to boot into recovery after flashing the recovery or it gets reset.
Hi,
Having a similar problem since trying to update my ROM ... and the Magisk install failed. Now I can only get to fastboot, can't get to recovery. And, tried this,
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.1.1-0-h830.img
target reported max download size of 536870912 bytes
sending 'recovery' (18644 KB)...
OKAY [ 0.439s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.461s
Help!?! ... and thanks!
I'm fixing a friend's cell phone, I had restore stock ROM with SP Flashtools because it did not start, when doing it, and system boot, all most app crashing and still keeps all the data as photos and settings. I enter the custom recovery, and I do all the Wipes, when boot again, it is as if the wipe was not executed, I deleted some files from the internal memory, restart and the files appear again, I have tried to flash a custom recovery by ADB and see this error :
% fastboot flash recovery TWRP.img
sending 'recovery' (8748 KB)...
OKAY [ 0.331s]
writing 'recovery'...
FAILED (remote:
partition 'recovery' not support flash)
finished. total time: 0.337s
I do not know what else to do, since it is impossible to install or run an application to root and install a custom recovery with the application because the cell phone only show crashing mensages.
Bump!!
Before:
I just unlocked the bootloader and installed a custom ROM (LineageOS 15.1: https://forum.xda-developers.com/huawei-y6/development/lineageos-15-1-huawei-y6-2018-t3832278) on my Huawei but it won't let me flash the TWRP from adb. I tried before flashing the custom ROM and also after but no progress. I tried with 'fastboot flash recovery recovery.img' as well as 'fastboot flash boot recovery.img' because I knew some smartphones include the recovery in the boot.img but I am always getting the same error:
Code:
fastboot flash recovery recovery.img
target reported max download size of 535822336 bytes
sending 'recovery' (16544 KB)...
OKAY [ 0.522s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.553s
I am not an expert but I understood that 'recovery' partition doesn't exist. I found some possible solutions online such as writing 'fastboot flash RECOVERY recovery.img' or 'fastboot flash erecovery recovery.img' (because Huawei calls the stock one 'erecovery') but they both gave me another error:
Code:
fastboot flash RECOVERY recovery.img
target reported max download size of 535822336 bytes
sending 'RECOVERY' (16544 KB)...
OKAY [ 0.522s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 0.528s
UPDATE: I found, maybe, the correct name of the recovery partition and it seems to work:
Code:
fastboot flash recovery_ramdisk twrp.img
< waiting for device >
target reported max download size of 535822336 bytes
sending 'recovery_ramdisk' (14026 KB)...
OKAY [ 0.443s]
writing 'recovery_ramdisk'...
OKAY [ 0.323s]
finished. total time: 0.767s
BUT it actually doesn't work properly because when I boot into recovery it boots the stock one. I tried other solutions found on the net like instantly unplug the phone after the flash and reboot it into recovery immediately but again it boots into stock one...
OTHER UPDATE: I managed to find and flash a TWRP that can boot up but it shows the internal storage 0MB not allowing me to install any .zip file. Because of that, I cannot install SuperSU to get root access.
I tried installing TWRP also with stock ROM but still showing 0MB because the phone is encrypted. To disable encryption I need to install the bluspark TWRP (As I found online), the problem is that bluspark won't boot and gets immediately overwritten by the stock ROM as it happened with the one I mentioned in the first update of the post.
Now I will try buying a microSD card and see if it shows right so that I can still flash .zip from the microSD card.
Now:
LATEST UPDATE: The SD card is working properly and I see it as around 60 GB instead of 64 but that's not the problem. I can see the .zip files I'd want to flash but when I try to do it it says me that it failed to mount every single partition and after some research I discovered that my Huawei has all the data encrypted. After other research I found that there are some TWRPs like blu_spark that could decrypt the data but every version I tried doesn't work and gets immediately overwritten by the stock recovery.
Does anyone know other methods to decrypt all the data on Huawei? Otherwise it's impossible to flash any .zip. Actually it flashes it but it fails to update the partitions state so the system doesn't recognize the changes.
Rooting Huawei is so difficult.. I will buy an OP5t as soon as I have the money XD.
Y6 2018 twrp
Any progress? I'm also looking for a version of TWRP that works with the Y6 2018.
Hi guys , i was running AOSIP PIE rooted and bootloader unlocked. I did an update of Magisk. And then i couldn't flash twrp it was not working , i could still boot phone normally and phone run smooth. Someone told me to flash TWRP with flashify and i did. Here the problems started , i started having error , can't boot anywhere etc...
I followed this tutorial https://forum.xda-developers.com/huawei-p20-pro/how-to/guide-erecovery-hisuite-failing-to-t3932203/ for last solution .
But unfortunatly i can't flash VENDOR.img in fastboot , i can flash all except VENDOR.img it says
C:\ADB>fastboot flash vendor VENDOR.img
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460796 KB)...
OKAY [ 10.697s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 10.711s
I have flashed with success TWRP twrp-3.3.1-0-charlotte , i can get to it but there is no files inside the phone and it's not supporting SD cards to i don't have any ROM to flash ...
Do you guys have any idea about what to do ?
Thank you very much
benkiller47 said:
Hi guys , i was running AOSIP PIE rooted and bootloader unlocked. I did an update of Magisk. And then i couldn't flash twrp it was not working , i could still boot phone normally and phone run smooth. Someone told me to flash TWRP with flashify and i did. Here the problems started , i started having error , can't boot anywhere etc...
I followed this tutorial https://forum.xda-developers.com/huawei-p20-pro/how-to/guide-erecovery-hisuite-failing-to-t3932203/ for last solution .
But unfortunatly i can't flash VENDOR.img in fastboot , i can flash all except VENDOR.img it says
C:\ADB>fastboot flash vendor VENDOR.img
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460796 KB)...
OKAY [ 10.697s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 10.711s
I have flashed with success TWRP twrp-3.3.1-0-charlotte , i can get to it but there is no files inside the phone and it's not supporting SD cards to i don't have any ROM to flash ...
Do you guys have any idea about what to do ?
Thank you very much
Click to expand...
Click to collapse
First, in TWRP, advance wipe everything! Now, you need a pc, connect the phone to PC with a USB, on pc, download any ROM you want (and gapps if you want) now transfer the files to your phone and then flash them, izi,
Thumbs up if I was useful.
DankMemz said:
First, in TWRP, advance wipe everything! Now, you need a pc, connect the phone to PC with a USB, on pc, download any ROM you want (and gapps if you want) now transfer the files to your phone and then flash them, izi,
Thumbs up if I was useful.
Click to expand...
Click to collapse
Hi thank you for your help , unfortunatly at the end of the ROM installation , my phone reboot back to fastboot mode , no matter wich ROM i boot in it
also good to precise i have a Huawei p20 pro
benkiller47 said:
Hi thank you for your help , unfortunatly at the end of the ROM installation , my phone reboot back to fastboot mode , no matter wich ROM i boot in it
also good to precise i have a Huawei p20 pro
Click to expand...
Click to collapse
Try reinstalling stock firmware trough download mode...
Try reinstalling the twrp image. Helped me once