-Download the latest stock firmware for your Samsung Galaxy A70s with Samfirm app or Samfrew/Sammobile
Your KNOX status will be tripped if you're following this tutorial...
https://samfirmtool.com/samfirm-v0-4-1
https://samfrew.com/model/SM-A707F/
https://samfrew.com/model/SM-A7070/
You may need : https://samsungodin.com/download/Odin3_v3.13.1.zip
-Extract the SM-A707XX_1_EXAMPLE_0000000_fac.zip.enc4 file with 7zip or any other unzipper.
-Copy the (AP_A707XXXU1ASIX_EXAMPLE_0000000_user_low_ship_MULTI_CERT_meta_OS9.tar). AP .tar file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.3.5/MagiskManager-v7.3.5.apk.
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched .tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A70s.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System with no Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons →System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery
Hi bro how can v convey A705w single sim to dual Sim?
Android 10 is released.
Related
hello everyone ..... i will share the root trick without ubl (unlock bootloader)
this method only applies to root magisk only.
this trick I have tested with mobile phone huawei y5 2017 with android version 6.0
and xiaomi redmi note 3 mtk ..
what you prepare as follows:
1.Firmware same with your phone type (my recommendation is flash FW on your phone)
2.Boot.img from the appropriate firmware of your phone type
3.magisk manager
execution steps:
1. make sure the phone is connected internet
2. open the phone settings to activate usb debugging and install the source check from the outside in the security settings.
3. copy boot.img into sdcard on phone
4. install magisk manager application and open the application,
go to the settings on the top left and search "booted boot output format and you can choose according to your needs (if select img.tar, this works with Odin samsung). make your choice (if img = flash with fastboot or spflashtool, ufibox.
go back and select pairs and you will see 3 options "download zip, patch boot img file, install "
please select "patch img boot file" select file and search boot.img stored in sdcard and ok ... magisk manager will download automatically ... just wait until there is installation process is complete.
after finished you see its results in the internal memory in the folder "magisk manager"
there is a file named "patched_boot.img" that means success
copy patched_boot.img to laptop / pc and rename it to "boot.img" and flash it with the appropriate tool of your phone.
if boot.tar in flash with odin
if boot.img flash with spflashtool (if your chipset is mtk)
just install patched_boot.img your phone is rooted
thanks to @topjohnwu
I am sorry, my English is not good
*remember that all the risks in modification are at risk and I am not responsible for all your failures .....
thanks for visiting and hopefully to suc ...
Does this work with Sony Xperia X Performance (Android oreo) that has ubl no?
Requirements:
1. You must have non patched Luis kernel and copy to memory card
https://forum.xda-developers.com/tab-s5e/development/kernel-luiskernel-gts4lvwifi-gts4lvlte-t3977343
2. TWRP installed
When Magisk Manager prompts you to update Magisk, DO NOT direct install or bootloop as a result. Instead, download the zip and copy to memory card
If you did direct install and caused bootloop, just press and hold volume up and you will be on TWRP
You can reboot to TWRP
1. Flash non patched kernel image
2. Install latest Magisk zip
3. Reboot
Hi
This Guide IS ONLY FOR SM-A260G
Some of A2 devices have problem patching cert
signal just work for 1 minute then no service and NG Status or even be stable phone storage goes from 16gb to 8gb
we going to fix it.
Requirements:
***I have used Chimeratool***
1.Read Carefully
2.Download This 4file firmware A260GDDS7ATH1
3.MagiskRoot APK
------
-Factory reset Before flashing
-Flash the firmware
-Enable OEM Unlock Option in usb debugging
-Install Magisk Root APK file
-Copy AP Section of firmware in Storage
-Patch it by Magisk App
-Copy Patched Ap file in pc and flash it By odin(After flash it my take a while to load system) dont worry
-open magisk app and let pop-up dialog do the additional setup then phone reboots and you are ROOTED
-Repair IMEI by Chimera
-Patch cert by Chimera (2020 September) Version of patch cert
*****After Patch your Storage Capacity Should Change as 16gb to 8gb no worry****
-Just reboot download mode
-put CSC section of firmware in odin and uncheck repartition and flash it
Done You repaired and patched Imei and Signal is Stable.
Storage is Safe.
IMPORTANT
Rooting can break your phone. Do this at your own risk.
Intro
This guide explains how you can root any Sony Android phone without installing a custom recovery like TWRP. It's possible by downloading the latest firmware, patching the boot IMG file with Magisk and flashing the patched boot IMG.
Note 1:
If you have the XQ-AU52_EU_59.2.A.0.463-R14C firmware installed (Sony Xperia 10 II EU Android 12), you can skip downloading the firmware and converting the file from SIN to IMG. Flash the patched "boot.img" file in the attachment instead.
Note 2:
If you don't like the skin that's installed along Android 12 on the Sony Xperia 10 II, you can downgrade the firmware by using Sony Xperia Flash Tool - Emma.
Note 3:
All files I collected are available
How to
Install all Android updates on your phone
Back-up your phone with a tool or Google back-up
Unlock the bootloader (wipes all data on your phone)
Sony users:
https://developer.sony.com/develop/...d/unlock-bootloader/how-to-unlock-bootloader/
Download the latest firmware
Sony users can use XperiFirm which you will find in the attachment
Make sure the version you download matches the one on your phone!
Convert the “boot SIN” file you just downloaded to IMG:
Drag the “boot SIN” file to “unsin.exe” and an IMG file will be created
(you will find "unsin.exe" in the attachment)
Copy the IMG file to your phone
Copy Magisk APK to your phone
(you will find Magisk in the attachment)
Install Magisk on your phone using the APK you copied
Open Magisk on your phone
Install Magisk (button in the app) and patch the “boot IMG” file you just copied
Get the files for ADB (platform-tools)
(you will find the files in the attachment)
Copy the patched “boot IMG” file to the “adb” folder on your pc and rename it to “boot.img”
Enable USB debugging on the phone:
a) Settings » About » Tap “Build” until you a message appears you are a developer
b) Settings » Advanced » Developer » USB debugging
Open a CMD window in the “adb” folder
a) Press the “Windows botton”
b) Type "cmd"
c) Click "Command Prompt"
d) Type "cd /d <path to directory with adb.exe file – i.e. c:\myfolder\adb>"
Start the phone in “fastboot” mode:
a) Turn the phone off
b) Press the "volume-up" button and connect the USB cable at the same time
Install the USB drivers
(you will find the files in the attachment)
Run "fastboot flash boot boot.img" (watch the file name)
Disconnect the cable and turn the phone on
Download "Root Checker" from the Play Store and open it
Tap "Check Root"
A popup will appear to grand root access to the Root Checker app
If a message stating "ROOTED" appears your phone is succesfully rooted
That's it!
I want to root my device. Will twrp 3.6.0 from mastersenpai05 work on MIUI 14.0.1?
it seems to me that this TWRP is A11 and MIUI 14 A13.
No need for TWRP to root.
Root:
1. Find or redownload the TGZ file for your current ROM or other rom.
2. Browse inside the zip file and find boot.img under the images folder
3. Copy this file to a temporary location in your PC first, and then transfer it to your phone
4. Install the desired version of Magisk app
5. Run the app and choose Install under Magisk
6. Choose Select and Patch a File, then select the boot.img that was transferred earlier
7. A process will run and create a new .img file in the same folder where the original one was
8. Transfer the new file to your PC in the same directory where fastboot.exe is located
9. Open a command prompt window in that same directory
10. Reboot your phone to fastboot mode and connect to PC, USB2.0 port. Check for connection by running command fastboot devices.
11. Run the command fastboot flash boot_ab magiskXXXX.img
***On some devices, disable-verity is required.
Once it's completed, run command fastboot reboot and the phone should boot and be rooted.