Hello, I'm a beginner.
Yesterday I unlocked the bootloader on my smartphone (Vivo Y71). Then I want to install TWRP for my smartphone, but no TWRP for my Android makes TWRP, and I try to find a way to make TWRP to support my Android. After I finished making it, I installed TWRP on my Android via ADB tools, and my recovery system has changed to TWRP, but the problem I experienced started from this, TWRP asked to enter a password. And I am looking for a way to bypass this, I do Wipe Data, but I get the error code "Permission Denied" and now my Android can't boot to the homescreen, and when I reboot / shutdown my android I always go into TWRP. and now I am confused what to do, to do flash recovery via ADB can not, because the Fastboot option is not in the TWRP that I installed, and my device is not detected on my computer. Can you help me with my problem?
NP: I use google translate, my English is very bad, please understand.
Thanks.
@semblekenew Hi! I currently have the vivo Y1 1724 4gb variant , snapdragon 450 , software version - PD1731F_EX_A_1.17.2 . And am currently trying to root my device and make and install twrp. I have tried various one-click root android apps , kingo root pc version , dr.fone root pc version. But , none see to work for me. As i have said i'm also trying to port twrp v.3.3.1 to my device. But , I need some guidance who has previously done it. Can you please share me your twrp zip or guide me how to port ? And please tell me how you rooted your device and unlocked bootloader. Please reply to me ASAP. It's urgent!
---------- Post added at 10:42 AM ---------- Previous post was at 10:25 AM ----------
semblekenew said:
Hello, I'm a beginner.
Yesterday I unlocked the bootloader on my smartphone (Vivo Y71). Then I want to install TWRP for my smartphone, but no TWRP for my Android makes TWRP, and I try to find a way to make TWRP to support my Android. After I finished making it, I installed TWRP on my Android via ADB tools, and my recovery system has changed to TWRP, but the problem I experienced started from this, TWRP asked to enter a password. And I am looking for a way to bypass this, I do Wipe Data, but I get the error code "Permission Denied" and now my Android can't boot to the homescreen, and when I reboot / shutdown my android I always go into TWRP. and now I am confused what to do, to do flash recovery via ADB can not, because the Fastboot option is not in the TWRP that I installed, and my device is not detected on my computer. Can you help me with my problem?
NP: I use google translate, my English is very bad, please understand.
Thanks.
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------
And , regarding your TWRP encryption problem i think i can help you. Try every solution below. One might work for you.
Solution 1: Try password as " password" , it may work !
Solution 2: Try : default_password if this doesn't work.. Then am sorry my friend you have to format full data.
Solution 3: Its asking for the encryption password. The default password is "default_password" (without the quotes) try that. And if doesn't work then enter Bootloader (fastboot mode) and enter the following commands into CMD.
Code:
fastboot format userdata
Code:
fastboot format cache
Code:
fastboot reboot
This will unencrypt your phone and you'll be able to boot/enter TWRP normally.
Please do note that you'll lose ALL of your data from the commands.
Also, I'm not sure about this but you also might need to flash TWRP again.
Solution 4: Try flashing DM vertiy zip. It solves the problem (most recommended solution).
-----------------------------------------------------------------------------------------------------------------------------------------------------------
May i know what happened to your device. Have you solved the problem. Please share experience.
semblekenew said:
Hello, I'm a beginner.
Yesterday I unlocked the bootloader on my smartphone (Vivo Y71). Then I want to install TWRP for my smartphone, but no TWRP for my Android makes TWRP, and I try to find a way to make TWRP to support my Android. After I finished making it, I installed TWRP on my Android via ADB tools, and my recovery system has changed to TWRP, but the problem I experienced started from this, TWRP asked to enter a password. And I am looking for a way to bypass this, I do Wipe Data, but I get the error code "Permission Denied" and now my Android can't boot to the homescreen, and when I reboot / shutdown my android I always go into TWRP. and now I am confused what to do, to do flash recovery via ADB can not, because the Fastboot option is not in the TWRP that I installed, and my device is not detected on my computer. Can you help me with my problem?
NP: I use google translate, my English is very bad, please understand.
Thanks.
Click to expand...
Click to collapse
如何解鎖?
Related
Hi to all. I'm new in Honor world and I've stopped my Android experience with KitKat so I'm a little bit confused ...
I've read several guides (on XDA too) that that three steps to obtain root are unlock bootloader, flash TWRP via ADB and then install Magisk or SuperSU via TWRP. But in the thread on TWRP is clearly written that to install Magisk decryption is needed and to have decryption we must flash a kernel with encryption disabled in fstab. But no guide says anything about this step. Can someone explain me how encryption/decryption work doing a standard installation of TWRP ? Is needed a flash of a modified kernel ? And where find it ?
And another question (if it's not too much ). Since I don't need to install custom rom (I want root only to use some apps like Titanium) how can I make a backup of stock rom, boot.img, efs partition and all that can be useful to restore phone to the starting point if, by chance, I need Huawei warranty ?
Thanks a lot
Hi, apparently there's a way to get root on an encrypted system. Follow the rebrand guide and then flash supersu in TWRP via ADB sideload. It worked for me and a few others, there is no comment from the developers as of right now.
So basically in short follow this guide until you are finished with the TWRP section:
https://forum.xda-developers.com/honor-9/how-to/one-guide-recovery-os-roms-t3661829
Then
- enter twrp
- adb sideload supersu
Afterwards follow the "rooting!" section with point 2
Thank for your answer... I'd like to try to install Magisk instead of SuperSU. In several places is written that this should be right. I'll try....
unvisigoth said:
Thank for your answer... I'd like to try to install Magisk instead of SuperSU. In several places is written that this should be right. I'll try....
Click to expand...
Click to collapse
The method is also working fine with Magisk. Let me know if you need help
zxz0O0 said:
The method is also working fine with Magisk. Let me know if you need help
Click to expand...
Click to collapse
Finally done with a couple of hours of panic. This is the story if can be useful to someone...
Unlock bootloader....done TWRP install... done. Copy magisk (apk and zip) on phone than install apk without opening it. Reboot to recovery wipe all, factory reset. Trying to boot.....BOOTLOOP But I don't have installed Magisk zip. Only apk without opening it.
Nothing to do. Bootloop and then erecovery. I try to restore the backups previously done with TWRP. I restore boot and system partition. All wipes ...no luck. I don't know what has happened. While downloading full firmware to try to reinstall it I try to install magisk.zip. Install via TWRP. All wipes and then magically (it's such a case ) phone boots. Powered off and on several times no problem. Root (verified with root checker) ok.
I habe b100 release but I don't think to update to b130. I wait for Oreo...
The only two things that I can say are these: first TWRP even after flashing magisk gave an error (unable to mount system). Two while installing magisk it seems that magisk itself has patched something.
If someone has an explanation is welcome...
unvisigoth said:
Finally done with a couple of hours of panic. This is the story if can be useful to someone...
Unlock bootloader....done TWRP install... done. Copy magisk (apk and zip) on phone than install apk without opening it. Reboot to recovery wipe all, factory reset. Trying to boot.....BOOTLOOP But I don't have installed Magisk zip. Only apk without opening it.
Nothing to do. Bootloop and then erecovery. I try to restore the backups previously done with TWRP. I restore boot and system partition. All wipes ...no luck. I don't know what has happened. While downloading full firmware to try to reinstall it I try to install magisk.zip. Install via TWRP. All wipes and then magically (it's such a case ) phone boots. Powered off and on several times no problem. Root (verified with root checker) ok.
I habe b100 release but I don't think to update to b130. I wait for Oreo...
The only two things that I can say are these: first TWRP even after flashing magisk gave an error (unable to mount system). Two while installing magisk it seems that magisk itself has patched something.
If someone has an explanation is welcome...
Click to expand...
Click to collapse
So do you have some step-by-step instructions for someone who wants to unlock and root the phone with magisk?
shiboby said:
So do you have some step-by-step instructions for someone who wants to unlock and root the phone with magisk?
Click to expand...
Click to collapse
Here what I have done:
Unlock bootloader
install adb drivers (find something that is right for your PC. For example minimal ADB found on XDA weren't suitable for me. Google adb drivers...). Open a command windows (shift+right click). If typing "adb devices" your phone is found that's ok
Enable usb debugging and oem unlock (or in other words disable FRP, factory reset protection)
Put the phone in fastboot mode ("adb reboot bootloader"). If all ok typing "fastboot devices" your phone is found
Type "fastboot oem unlock xxxxxxxx" (xxxxxxxx is the code provided by Huawey)
Bootloader unlocked
Flash TWRP
Download TWRP recovery for Honor 9 (link found on other thread on this forum)
Put the phone in fastboot mode
Type "fastboot flash recovery xxxxx.img" (where xxxx.img is the recovery downloaded)
Reboot phone directly in Recovery to avoid erecovery overwrite TWRP. Booting on TWRP let TWRP patch to avoid erecovery booting
Now here I've had some issues as said (read previous post). My tip is the following:
after rebooting in TWRP make all wipes then reboot again in TWRP
Install Magisk.zip (for me download here https://geekaxe.com/root-honor-9-twrp-bootloader-unlocking/)
Reboot recovery
All wipes
Reboot to system
If it's all OK you can install magisk.apk and you are rooted
I suggest after flashing TWRP to make backup of all partitions on external SD (for some reasons, maybe encryption, backup on internal storage gives error). Again I suggest to copy all files that you need (i.e. magisk files) on external sd before starting all.
Pay attention that if you update firmware after this procedure I think that you must repeat all. For me I remain on original firmware found on phone (B100). B130 seems to have some bugs, B120 doesn't seem improve much. Moreover all releases are 7.0 based. I wait for Oreo, hopefully in some custom rom!
To add to this, a bootloop or two might be normal. Let it sit for a few minutes before considering re-flashing everything.
Thanks for your guide!
Zuzler said:
To add to this, a bootloop or two might be normal. Let it sit for a few minutes before considering re-flashing everything.
Thanks for your guide!
Click to expand...
Click to collapse
You're right. But after 20 minutes of bootlops I've chosen another way....:laugh::laugh:
unvisigoth said:
You're right. But after 20 minutes of bootlops I've chosen another way....:laugh::laugh:
Click to expand...
Click to collapse
So is it fixed?
Sent from my Honor 8 Pro using XDA Labs
adriansticoid said:
So is it fixed?
Sent from my Honor 8 Pro using XDA Labs
Click to expand...
Click to collapse
Yes sure. As said previously installation of magisk.zip fixed the bootloop problem. I think (but I could be wrong) that installation of TWRP corrupted the boot partition and magisk fixed it. But it's only an hypothesis...
unvisigoth said:
Yes sure. As said previously installation of magisk.zip fixed the bootloop problem. I think (but I could be wrong) that installation of TWRP corrupted the boot partition and magisk fixed it. But it's only an hypothesis...
Click to expand...
Click to collapse
Observe and be careful man.
Sent from my Honor 8 Pro using XDA Labs
unvisigoth said:
Yes sure. As said previously installation of magisk.zip fixed the bootloop problem. I think (but I could be wrong) that installation of TWRP corrupted the boot partition and magisk fixed it. But it's only an hypothesis...
Click to expand...
Click to collapse
Which TWRP version did you use?
I had a similar problem after formatting all data with the OpenKirin TWRP 3.1.1 Perhaps its an issue with this TWRP release?
I was able to recover in similar circumstances by flashing a stock boot.img over fastboot. Based on this, it's looking like Magisk is really the way to go for rooting atm. Making sure to pull my twrp backup with adb this time though.
If I'm lucky enough to install magisk and not get a bootloop the safetynet always fails. Anyone got a valid method of actually getting magisk working fully?
I wanted to make sure everyone read this part first so that you know it's critical to backup because it happened to me figuring things out. If for any reason you are stuck in a boot loop, just reload twrp recovery and restore boot.img that you backed up for an easy quick fix.
Install drivers and adb on your PC.
Open command prompt or search 'cmd'.
Navigate to the directory with adb.exe
Download and store TWRP 2.2.2 (preferred) in the same directory where adb is located. Recommend renaming recovery file to recovery.img
Enable usb debugging on device by going to settings > about > and click on MIUI version repeatedly until developer settings are enabled. Go back and select additional settings to enable usb debugging.
Run the command: adb devices - to verify if able to connect to device (the serial number of your device will populate if so.
Run the command: adb reboot bootloader and phone device should say "Fastboot" in blue font
Run the command: fastboot boot recovery.img
Recovery will show in Chinese, click on the bottom right button to select English
May require to enter your default password you use to unlock your phone normally.
Click backup and be sure to backup system, boot, and recovery most of all so it's easy to recover your device moving forward.
Download and save SuperSU (I have been unsuccessful in getting Magisk to work at this time) onto storage device from PC to MI 8 that should appear with your Internal storage
Click on "Mount" in TWRP and unselect read-only
Click "Install" and flash SuperSU then reboot (my device rebooted one time and fully boot up the 2nd time so you're not alarmed)
Links:
SuperSU: https://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
TWRP: https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-2-0703-t38126005
Appreciate any feedback, ideas, thoughts, or suggestions where all can collaborate and expand where we help each other further. Look forward to the future development of the MI 8 folks! Please note, I wanted to share the method that seemed to work best for me, but please be aware each and every single MI 8 device is not always exactly the same and the end result may vary and I'm not held accountable or responsible should you choose to follow the directions listed above. However, I wanted to share this information to help avoid any frustration going forward and save you time.
p.s. - If someone could help me figure out how to get twrp recovery to hold and not end up being replaced by mi recovery I would be most grateful as this has been an issue for me (I tried flashing, booting, and installing the img through twrp with no success). Thank you.
Hello thanks for your guide but i think we first need to unlock bl And for the twrp recovery to stick and not to be replaced by xiaomi recovery we need to flash something called "dm-verity " it basically removes that check, which replaces any other recovery by xiaomi recovery
Have a nice day and thanks for your work
I thought so as well, unfortunately I just haven't had much luck with dm verity which led to a soft brick on my device. I'll have to look over the code as it may vary in comparison to other xiaomi devices.
Sent from my MI 8 using Tapatalk
Fastboot flash recovery Command should do it ..
mekaziah said:
I wanted to make sure everyone read this part first so that you know it's critical to backup because it happened to me figuring things out. If for any reason you are stuck in a boot loop, just reload twrp recovery and restore boot.img that you backed up for an easy quick fix.
Install drivers and adb on your PC.
Open command prompt or search 'cmd'.
Navigate to the directory with adb.exe
Download and store TWRP 2.2.2 (preferred) in the same directory where adb is located. Recommend renaming recovery file to recovery.img
Enable usb debugging on device by going to settings > about > and click on MIUI version repeatedly until developer settings are enabled. Go back and select additional settings to enable usb debugging.
Run the command: adb devices - to verify if able to connect to device (the serial number of your device will populate if so.
Run the command: adb reboot bootloader and phone device should say "Fastboot" in blue font
Run the command: fastboot boot recovery.img
Recovery will show in Chinese, click on the bottom right button to select English
May require to enter your default password you use to unlock your phone normally.
Click backup and be sure to backup system, boot, and recovery most of all so it's easy to recover your device moving forward.
Download and save SuperSU (I have been unsuccessful in getting Magisk to work at this time) onto storage device from PC to MI 8 that should appear with your Internal storage
Click on "Mount" in TWRP and unselect read-only
Click "Install" and flash SuperSU then reboot (my device rebooted one time and fully boot up the 2nd time so you're not alarmed)
Links:
SuperSU: https://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
TWRP: https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-2-0703-t38126005
Appreciate any feedback, ideas, thoughts, or suggestions where all can collaborate and expand where we help each other further. Look forward to the future development of the MI 8 folks! Please note, I wanted to share the method that seemed to work best for me, but please be aware each and every single MI 8 device is not always exactly the same and the end result may vary and I'm not held accountable or responsible should you choose to follow the directions listed above. However, I wanted to share this information to help avoid any frustration going forward and save you time.
p.s. - If someone could help me figure out how to get twrp recovery to hold and not end up being replaced by mi recovery I would be most grateful as this has been an issue for me (I tried flashing, booting, and installing the img through twrp with no success). Thank you.
Click to expand...
Click to collapse
Skickat från min MI 8 via Tapatalk
what issues do you get with magisk? I was able to flash it without any issues.
superior8888 said:
Fastboot flash recovery Command should do it ..
Skickat från min MI 8 via Tapatalk
Click to expand...
Click to collapse
Yes it does. Don't know why anyone would run SuperSU though.
mekaziah said:
I thought so as well, unfortunately I just haven't had much luck with dm verity which led to a soft brick on my device. I'll have to look over the code as it may vary in comparison to other xiaomi devices.
Click to expand...
Click to collapse
MAKE SURE U HAVE UNLOCKED BOOTLOADER
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
-fluffy- said:
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
Click to expand...
Click to collapse
Would you mind stating the version of Magisk?
Strange Guide no Attention for Unlok Bl.
barrielui said:
Would you mind stating the version of Magisk?
Click to expand...
Click to collapse
16.4
magisk has been working fine for me for a while
samwise110712 said:
what issues do you get with magisk? I was able to flash it without any issues.
Click to expand...
Click to collapse
What's your ROM version? I flash twrp then magisk, bootloop...
-fluffy- said:
MAKE SURE U HAVE UNLOCKED BOOTLOADER
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
Click to expand...
Click to collapse
Hello how did you flash the TWRP through the TWRP ???
What version of MiUi you have ???
omek07 said:
Hello how did you flash the TWRP through the TWRP ???
What version of MiUi you have ???
Click to expand...
Click to collapse
simple put twrp.img on ur storage
then flash img from twrp
-fluffy- said:
simple put twrp.img on ur storage
then flash img from twrp
Click to expand...
Click to collapse
Yes but its asking after in which partition.
What partition you chose ?
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
-fluffy- said:
simple put twrp.img on ur storage
then flash img from twrp
Click to expand...
Click to collapse
Could you please tell me what rom you have ???
Thank you
omek07 said:
Yes but its asking after in which partition.
What partition you chose ?
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
Could you please tell me what rom you have ???
Thank you
Click to expand...
Click to collapse
u choose recovery
im using miui eu
magisk is running without any issue.
i am on the newest xiaomi eu beta rom and flashed magisk 16.7 without any issue right now
(after waiting horrible 15 days for unlocking the bootloader)
Ok so both of you have the xiaomi eu. I have global stable 9.5.11. so maybe that's the problem
---------- Post added at 06:30 AM ---------- Previous post was at 06:29 AM ----------
So both of you have xiaomi eu rom. I have global stable 9.5.11. maybe that's the problem.
omek07 said:
Ok so both of you have the xiaomi eu. I have global stable 9.5.11. so maybe that's the problem
---------- Post added at 06:30 AM ---------- Previous post was at 06:29 AM ----------
So both of you have xiaomi eu rom. I have global stable 9.5.11. maybe that's the problem.
Click to expand...
Click to collapse
I have the lastest global version, I cannot get the root access...
Someone tell me flash the Chinese verision then flash xiaomi.eu and magisk.
felixrao said:
I have the lastest global version, I cannot get the root access...
Someone tell me flash the Chinese verision then flash xiaomi.eu and magisk.
Click to expand...
Click to collapse
My friend i changed to the Xiaomi eu and everything worked. You dont have to flash the Chinese Version first you can go from Global to Xiaomi.eu. Just dont forget to do FORMAT data and not only Wipe Data.
as stated above, i can't seems to find a workable root method for this device. i've already tried kingroot, kingoroot, and some unknown website that claimed have solution to root this device and make my phone restart and restart and restart.. luckily, my phone still can be saved.
im now at dead end. can someone help me how to root this device, and a clear tutorial since, im not good with android system..
thanks..
bump
while waiting for someone to come out with help. I've found a website which have "unofficial" twrp.
https://unofficialtwrp.com/doogee-bl12000-pro/
I want a comfirmation if this site is trustworthy.
I've tried flash the twrp into my phone but it keep booting at recovery and can't boot into system.
I'm flashing using CMD like this:
fastboot oem unlock
fastboot flash recovery recovery.img
fastboot boot recovery.img
Click to expand...
Click to collapse
and what the function of "fastboot flashing unlock"?
I'm thinking of using magisk to root my phone but I don't know what "stock boot image dump".
bump
seems that https://unofficialtwrp.com/doogee-bl12000-pro/ really work, but for my case, it's required me to decrypt password, while im not had any password.
after many times of rooting effort, it success. for those who have problem that occur to me:- BOOTLOOP at RECOVERY and RECOVERY can't read SDCARD or STORAGE
1. Root your phone using the twrp above
2. if bootloop to recovery, make sure you have sdcard and have supersu flash file inside it.
3. in twrp, go to wipe. and then format factory
4. go to mount and choose media sdcard
5. at the homescreen, go to install and then flash the supersu flash file.
6. done
Click to expand...
Click to collapse
in my case my phone gained root permission, but lose twrp recovery. i don't really know about phone, so i hope someone can add something to make this clear to who's that read.
my goal is to root, so without having twrp doesn't concern me much.
well.. my mistake.. the TWRP is there. i dindt realize it.
hello
Please help me
I mistakenly gave the recovery TRWP model 12000 to the phone
And now the phone is turned on and off
What should I do to be right?
please somebody help me
Would anyone help me get root on doogee bl 12000? This is a version without a pro so this is a different topic than this one.
No kingoroot or framaroot programs work.
I have flashtoola and rom for this phone. I tried using adb to upload files with the 12000 pro doodge but there was always some error.
I also tried to upload files via flashtoola and recovery. However, without success.
Root Doogee BL12000
Hallo there. I'm trying to root my Bl12000. I've got a TWRP from twrp builder. It works, but whatever zip file I'm trying to install I always get "failed to mount data", invalid argument. The twrp also tells me, that there's bo OS installed, but there is. Phone is working fine after reboot. SuperSu can't be installed. Full wipe is not possible, also "failed to mount" and so on.
any help ?
Tia, Chris
I think it's the encryption. Any ideas how to remove it?
Installed twrp via fastboot and sp flash tool, but I can't boot phone into it. Searched dozens of sites, no success. Flashed the twrp again with sp flash tool and according to sp it was successful. I tried several ways to boot the phone into it afterwards, no luck
My goal is to root this phone only. I'm not very experienced so if anyone could please give me a hand here and tell me where or what I'm doing wrong, that'd would be great and much appreciated. Thanks.
Ok. If I flash the twrp with Sp flash tool and type "fastboot reboot" on the adb console, sending the command while I hold vol+ and power-, the phone boots into the twrp. Next time it will be gone, so I have to flash it again. Noticed that, done.
But all this is taking me nowhere, because the encryption still prevents me from installing any zip file or format a partition. Yuck ?
Root Bl12000
Since the SuperSu method took me nowhere I decided to try Magisk. And.......HURRAY !!!!!!.......it worked.....for a moment. Booted the patched boot.img and got superuser. But with the first reboot I got stuck in bootloop. Tried again, in case I missed something, but same ****.
IT WORKS !!!!! My mistake was to assume, that Magisk works the same way as rooting with SuperSu does. So after rooting with Magisk I tried to install root apps as I was used to, but Magisk does not work that way.
Well, it'll take me awhile to figure this out ?
Why does an app keep coming back on my phone after I have done factory reset?
Christian1968.Bolz said:
Hallo there. I'm trying to root my Bl12000. I've got a TWRP from twrp builder. It works, but whatever zip file I'm trying to install I always get "failed to mount data", invalid argument. The twrp also tells me, that there's bo OS installed, but there is. Phone is working fine after reboot. SuperSu can't be installed. Full wipe is not possible, also "failed to mount" and so on.
any help ?
Tia, Chris
I think it's the encryption. Any ideas how to remove it?
Installed twrp via fastboot and sp flash tool, but I can't boot phone into it. Searched dozens of sites, no success. Flashed the twrp again with sp flash tool and according to sp it was successful. I tried several ways to boot the phone into it afterwards, no luck
My goal is to root this phone only. I'm not very experienced so if anyone could please give me a hand here and tell me where or what I'm doing wrong, that'd would be great and much appreciated. Thanks.
Lucky Patcher 9Apps VidMate
Ok. If I flash the twrp with Sp flash tool and type "fastboot reboot" on the adb console, sending the command while I hold vol+ and power-, the phone boots into the twrp. Next time it will be gone, so I have to flash it again. Noticed that, done.
But all this is taking me nowhere, because the encryption still prevents me from installing any zip file or format a partition. Yuck
Click to expand...
Click to collapse
This Recovery is only supported for Doogee BL12000
You should have either PC or Laptop.
Make sure to charge your phone for at least 50%.
Download and install latest Doogee USB Drivers on your PC/Laptop [All Android USB Drivers]
Download the SP Flash Tool Software
VCOM driver: Download – Instal the VCOM Driver on your computer (still compatible with MT67xx phones)
Before flashing a custom recovery, you need to unlock the bootloader on Doogee BL12000
Take a full backup just in case if you need it later
TWRP+root bl 12000
joachim97 said:
Would anyone help me get root on doogee bl 12000? This is a version without a pro so this is a different topic than this one.
No kingoroot or framaroot programs work.
I have flashtoola and rom for this phone. I tried using adb to upload files with the 12000 pro doodge but there was always some error.
I also tried to upload files via flashtoola and recovery. However, without success.
Click to expand...
Click to collapse
On the forum 4pda can be found for bl 12000
TWRP+ROOT
when you install twrp formatting you can not do it, but immediately install magisk and reboot ...
Doing this quick update because today, when trying to root my phone, bricked it several times and lost all app info
If you are using android 7.11, this guide works fine: https://forum.xda-developers.com/zenfone-3-zoom/how-to/how-to-root-zenfone-3-zoom-ze553kl-t3622256
If on android 8, SuperSU will brick your phone. Use Magisk instead:
- enable usb debug mode on your phone
- unlock bootloader
- plug phone into your computer
on your pc
- Download fastboot and adb:
* Windows: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
* macos: https://dl.google.com/android/repository/platform-tools-latest-darwin.zip
* linux: https://dl.google.com/android/repository/platform-tools-latest-linux.zip
- download the latest Magisk unlock script from https://github.com/topjohnwu/Magisk/releases and copy it to a MicroSD or USB that you can attach to your phone. Look for Magisk, not Magisk Manager
- download twrp v 3.1.0-0-Z01H-20170408: https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w?E81jQTCD (this is from https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w, as described in the old root guide using twrp + supersu. It is supposed to be safe)
- `adb reboot bootloader`
- `fastboot flash recovery <path to twrp image downloaded>`
- `fastboot reboot`
Right now, you should probably backup your phone.
back on your phone:
- before booting, press volume up on the bootloader, there, select Recovery. Using fastboot to reboot into recovery might cause the stock recovery image to reflash
- if prompted to enable system modifications, allow it.
- If prompted to decrypt your data in TWRP, use the PIN you setup. If it doesn't work, I can't guarantee you won't brick our phone. Feeling brave enough? In case of brick keep reading, it is easy to restore your phone to stock Android 8 using official firmware.
- press install, choose the device attached to your phone that has Magisk-xxx.zip and select it
- flash the image and it should be OK
In case of brick or unsuccessful flash from SuperSU and without backup:
- Don't panic, like I did today
- download the latest firmware from Asus: https://www.asus.com/us/Phone/ZenFone-3-Zoom-ZE553KL/HelpDesk_BIOS/
- follow this guide: https://forum.xda-developers.com/zenfone-3-zoom/how-to/manually-update-to-7-11-t3815703
- when the phone reboots, boot into recovery
- enable ADB sideload
- on your pc: `adb sideload <path to newest firmare>`
- now follow the root guide above before starting your phone
- ???
- profit
Note: commands using adb and fastboot assume you have put the contents from the downloaded platform tools in your PATH, else execute them from the directory in which they were extracted, for instance, on linux:
- `cd /home/$USER/Downloads`
- `unzip platform-tools-latest-linux.zip`
- `cd platform-tools`
- `./adb devices`
Bricked my phone.
in which step?
You should have access to fastboot, try the downgrade tutorial and install android 7 then imediately flash the latest image from ASUS
gchamon said:
in which step?
You should have access to fastboot, try the downgrade tutorial and install android 7 then imediately flash the latest image from ASUS
Click to expand...
Click to collapse
After the magisk install. It logged some "can't mount partition" errors, I tried to wipe, but do not worked.
It got stucked on Asus logo.
I did the unbrick tutorial.
This is strange. Magisk is supposed to patch the boot image and install its app (by the way, if you update magisk using the app, phone enters bootloop)
Anyway, I have encountered myself many problems when installing, but nothing like this. Bootloops and corruption message on bootloader yes, but I can't seem to recall anything about partitions not being mounted. If installing stock recovery image, boot image and system doesn't do the trick, in my experience it is either bad partitioning, although unlikely, because those procedures doesn't repartition anything, or bad internal storage.
But just to be sure, you should reflash stock 7.1 image (recovery, boot and system) with fastboot, enter stock recovery and wipe cache/factory reset. If your phone is physically healthy, this should work
anonymousbsb said:
After the magisk install. It logged some "can't mount partition" errors, I tried to wipe, but do not worked.
It got stucked on Asus logo.
I did the unbrick tutorial.
Click to expand...
Click to collapse
Try to use twrp-3.2.3-0-Z01H-20181014, i faced the same issue and fixed by flash it
Enrico06 said:
Try to use twrp-3.2.3-0-Z01H-20181014, i faced the same issue and fixed by flash it
Click to expand...
Click to collapse
Cool, if this fixes the issue I will update the guide with this info
bro pls give an unofficial process to unlock this device because official unlock tool not working it shows "unknown network error".
kingairtel08 said:
bro pls give an unofficial process to unlock this device because official unlock tool not working it shows "unknown network error".
Click to expand...
Click to collapse
Downgrade to 7.1.1 and try it again.
Already tried on 7.1.1 lot of times same error shows.
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
kingairtel08 said:
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
Click to expand...
Click to collapse
normal. please wait 15min max
kingairtel08 said:
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
Click to expand...
Click to collapse
I can't really help you there. This guide is supposed to work for those who are able to unlock bootloader using official asus tools. Never heard of unofficial unlock methods. It is possible that you have a hardware problem if you use those tools and they just don't work.
kingairtel08 said:
please share a working process of unlock bootloader without asus unlock tool apk....i m waiting for 3 years
Click to expand...
Click to collapse
Have you used the latest official unlocking tool? I see there's a July 2019 version available.
If you are on an older version of Android (not Oreo) are you presently still getting OTA update prompts?
I tried this tool but no result.
is it possible to root ZE553KL without loosing user application's data? I have unrooted device, wanted to migrate telegram secret chats to new phone. it is doable but with rooted smartphone only. if rooting process is destructive I cannot migrate. if rooting is doable with preserving installed applications along with their data then there is a hope for successful migration.
does this method look promising or it is just fake method?
Asus Zenfone 3 Zoom ZE553KL root using Magisk [No need TWRP Recovery
How to root Asus Zenfone 3 Zoom ZE553KL with Magisk [no need TWRP recovery, easy method to rood your Android device.
www.mobilewithdrivers.com