[AOSP 10.0] [2019-12-06] Quack Phh-Treble - Treble-Enabled Device Development A/AB ROMS

Hi all,
Here is the thread about Phh-Treble for Android 10.0, codename Quack.
The goal of Phh-Treble for Android 10.0 is the same as for Android 8.0, 8.1, and 9.0: Bring latest AOSP to the maximum number of devices running Google-certified Treble[1], with full hardware support.
You can download latest release at https://github.com/phhusson/treble_experimentations/releases
Which variant do I pick
To know which variant to download, use https://play.google.com/store/apps/details?id=tk.hack5.treblecheck . Don't use other Treble Check apps, they'll give erronous informations.
And then, you're free to choose between vanilla and gapps variant.
What works?
On some devices, everything. They are still not the majority though.
What you can expect on the majority of devices?
It should boot successfully on pretty much all devices with Google-certified Treble. [1]
Most features should work on the majority of devices out-of-the-box: RIL, WiFi, brightness control, buttons, gestures, ...
However, many devices still have issues with hardware video decoding and camera.
Is device XXX supported?
If it's a Google-certified Treble, yes it is. Unlike Google's GSI, Treble devices supported, there is no exception.
There might be bugs of course, but if you help me, I'll fix them!
Which vendor to use?
1. Always use your actual device's vendor
2. Always use OEM unmodified vendor, not some custom vendor
3. This includes boot.img. boot.img and vendor MUST BE the same version.
4. If you're on an Android 8.0 vendor, you'll need to stick to vendors with Security Patch Level before April 2019 (that's a bug of my GSI)
Enjoy!
[1] How do I know my device is Google-certified Treble?
Well it's easy, if your device has first been released with Oreo or more recent, and it has google apps, it has a Google-certified Treble.
Please note that this means only the vendor provided by the OEM is certified, not the one from device-specific ROM.

---

free post

---

I want to test it on op7 as soon as possible
Sent from my GM1903 using Tapatalk
---------- Post added at 08:54 PM ---------- Previous post was at 08:53 PM ----------
Thank you very much
Sent from my GM1903 using Tapatalk

---

Nice build, on G6 Play only works with oreo vendor.
A test img boots with pie vendor boots but no sound.

---

Excellent work :good:
Works well on Huawei P10 lite ( emui 8 ) except:
- Fast battery drain & battery usage isn't aviable
- Unknown model/build number
- There is an internal problem .. ( message ) on boot
- Camera fixed using a patch ( libcamxxx )

---

Well phh keep up the good worwork, you're doing something different and we appreciate your time and effort in helping other devices with little or no custom ROMs support enjoy the latest version of AOSP

---

Brilliant work ?

---

So replying to what you said on the other thread. I wasn't flashing magisk with android q on the s9+ Exynos, does that matter? Because you said that we need your modded magisk

---

Ive tested v. AOSP 10.0 on the p8lite2017 (PRA-LX1)
Everything seems to work fine, so you will be able to use it daily even now. Everything is fixed but for NFC you need to flash a fix and for GPS: it is partly working and instable. I don't know if there are any improvements in the Versions after v206 since they don't boot.
Every version since v206 will bootloop. You can try to dirty flash it over an booting android 10 ROM but this will cause system problems.
Thanks for everything!
NfC Fix:
https://forum.xda-developers.com/p1...al-fixes-hi6250-devices-t3936745/post81021365
Thanks for all developments!
Last Edit: 13th January 2020

---

I'm on mi 9 lite (mi cc9) most things work but lockscreen cant be set other then swipe.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

---

Please,fix sound
Gửi từ SM-G610F của tôi bằng cách sử dụng Tapatalk

---

last build v201.. booted properly on YSL Arm64 A only....

---

Mi 5s Plus
Working - google play service, call, sms, mtp, camera, wifi, mobile data, magisk (phh modified version only), IR blaster, music & video
Not working - bluetooth, gps, some softwares installed through magisk failed to get storage permission (the same software in apk version has no problem).
:good:

---

Consumer name: Moto X4
Developer name: payton
Model: XT1900-1
Boot type: AB
Arm type: Arm64
Consumer type: Google Fi
Cellular provider: Google Fi
Location: USA
SD card used? No. - Internal storage only (32 GB)
Before install? Full wipe + full firmware flash = clean device
File: system-quack-arm64-ab-gapps.img
Status: Bootable but not yet useable.
Hardware:
The thumbprint device is not working. This means you cannot swipe for navigation or unlock your phone using a thumbprint.
No sound on calls. -- But can make calls
Reboot device is always greeted with "SIM card added" notice telling me to reboot the device. -- I can ignore this and make phone calls.
ROM Software:
Andriod Webview cannot be installed (error received when updating bundled Chrome)
Developer options: OEM unlock is greyed out -- The phone is unlocked.
The navigation menu when enabled does not display.
Google which is bundled with Gapps cannot update.

---

google pixel can't pass safetynet ?
thus google apps don't work
anyone can ??

---

phhusson said:
free post
Click to expand...
Click to collapse
Clean flash arm64 a only vanilla on my s9+ with magisk v20 and a custom kernel, but won't boot. I have a logcat if you want that? Not sure why it won't boot. Seems it can't find ANYTHING that is supposed to be in the treble manifest.xml for the device

---

Nice work. Thanks

---

I cant get it to boot on my moto g7 power, treble and a/b enabled. flash twrp , install image to system but it just reboots as if there is no OS, system is mounted when flashed.

---

winxuser said:
Clean flash arm64 a only vanilla on my s9+ with magisk v20 and a custom kernel, but won't boot. I have a logcat if you want that? Not sure why it won't boot. Seems it can't find ANYTHING that is supposed to be in the treble manifest.xml for the device
Click to expand...
Click to collapse
I have successfully installed v201 on my s9+ using csj1 vendor and using latest ww(yarpins) kernel for oneui although this release isnt stable enough for our device as of many UI glitches and many random reboots

---

justcallmeTHEKID said:
I cant get it to boot on my moto g7 power, treble and a/b enabled. flash twrp , install image to system but it just reboots as if there is no OS, system is mounted when flashed.
Click to expand...
Click to collapse
I'd need logs to confirm, but your issue is likely to be fixed with https://github.com/phhusson/platfor...mmit/477ef41ac3a639f4c34c8ecf323d25ed2d3e8e8e so next release should be good to go.