Anyone getting the same issue?
When I flash Magisk 20.0, the phone stays on the "Pocophone" screen seemingly forever. Uninstalling it with a Magisk Uninstaller makes the device boot up again.
EDIT: Solved thanks to @thomas140 - Magisk 17.1 was the key
This is what I've done to get it to work:
- Flash Magisk Uninstaller
- Flash Magisk 17.1 or 17.0
- Wipe data/cache
- Boot to OS, update Magisk Manager to latest version
- Go back to recovery and flash Magisk 20.0 (or whatever the latest version is at the moment you're reading this)
- It works!
No issue here with the latest canary build
CaPicote said:
No issue here with the latest canary build
Click to expand...
Click to collapse
What recovery are you using?
TheReduxPL said:
What recovery are you using?
Click to expand...
Click to collapse
TWRP 3.3.0
flash MAGISK old version (19 or 19.x) and update magisk after boot, in magisk app
AndreSkywalker said:
flash MAGISK old version (19 or 19.x) and update magisk after boot, in magisk app
Click to expand...
Click to collapse
Just tried flashing Magisk 19, still causes the phone to no longer boot.
EDIT: Even tried flashing Magisk 18, didn't help. In fact, it's quite different, instead of being stuck at the POCOPHONE screen it keeps rebooting :s
No issues here too, i flashed miui and magisk v20 rebooted fine. Try to wipe data
Sent from my POCOPHONE F1 using XDA Labs
TheReduxPL said:
Just tried flashing Magisk 19, still causes the phone to no longer boot.
EDIT: Even tried flashing Magisk 18, didn't help. In fact, it's quite different, instead of being stuck at the POCOPHONE screen it keeps rebooting :s
Click to expand...
Click to collapse
You tried flash uninstaller magisk and reboot phone? After this trie reboot recovery flash dfe and flash magisk 19 or 20 and reboot. I follows this steps in every update miui.eu. Unistall magisk, flash dfe, flash magisk...
AndreSkywalker said:
You tried flash uninstaller magisk and reboot phone? After this trie reboot recovery flash dfe and flash magisk 19 or 20 and reboot. I follows this steps in every update miui.eu. Unistall magisk, flash dfe, flash magisk...
Click to expand...
Click to collapse
Yes, I'm rebooting every time I use the uninstaller, letting the system boot at least once before trying again.
Tried flashing DFE before flashing Magisk 19, it's still causing it to get stuck on the boot screen. How does it work for you but it doesn't work for me
Mcha01 said:
No issues here too, i flashed miui and magisk v20 rebooted fine. Try to wipe data
Sent from my POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
Tried that. Uninstalled Magisk, rebooted, wiped data, installed Magisk, no dice.
TheReduxPL said:
Tried that. Uninstalled Magisk, rebooted, wiped data, installed Magisk, no dice.
Click to expand...
Click to collapse
Run magisk uninstaller via twrp and install magisk 17.1. some said it worked.
thomas140 said:
Run magisk uninstaller via twrp and install magisk 17.1. some said it worked.
Click to expand...
Click to collapse
Yeah it did, thanks
What I've done:
- Flash Magisk Uninstaller
- Flash Magisk 17.1 or 17.0
- Wipe data/cache
- Boot to OS, update Magisk Manager to latest version
- Go back to recovery and flash Magisk 20.0 (or whatever the latest version is at the moment you're reading this)
- It works!
Same thing happened to me
I tried installing all versions and none of them are working
jordan_yoong_1 said:
Same thing happened to me
I tried installing all versions and none of them are working
Click to expand...
Click to collapse
Tell us your steps and see where goes wrong
Read Carefully..
So far this is how it worked for me and I think it will work to everyone.
First change your TWRP to Pitch black
https://forum.xda-developers.com/poco-f1/development/unofficial-pitchblack-recovery-project-t3847464
To change your TWRP
Extract the recover in twrp folder in the zip you download
flash image recovery
the if you are in the PITCH black recover flash it again using the zip file.
After that..
wipe dalvil/art cache, cache, system, data
then.
Flash miui 11 eu
Flash DisableForceEncryption_treble_v18 - if you don't want encryption
now.
In pitch black recovery go to advance>additional>tools>magisk - then swipe
Viola... after that set up your device then reboot
then update magisk in TWRP flash v20.
Tell me it work for u and thanks me later
thomas140 said:
Tell us your steps and see where goes wrong
Click to expand...
Click to collapse
First, I formatted my data because the recovery I was using was bugged and unable to decrype my data.
Then, I flashed miui.eu and dfe treble.
After that, I boot into system, complete my setup then boot into recovery again to install my magisk.
I installed basically all major version starting from 17 and all of them doesnt work. My phone just stuck at the 'pocophone' screen
---------- Post added at 09:13 PM ---------- Previous post was at 09:09 PM ----------
jordan_yoong_1 said:
First, I formatted my data because the recovery I was using was bugged and unable to decrype my data.
Then, I flashed miui.eu and dfe treble.
After that, I boot into system, complete my setup then boot into recovery again to install my magisk.
I installed basically all major version starting from 17 and all of them doesnt work. My phone just stuck at the 'pocophone' screen
Click to expand...
Click to collapse
Wait, I just tried v19.3 and it worked lol wtf
I jumped from v18.1 to v19.4 maybe that's why
TheReduxPL said:
Anyone getting the same issue?
When I flash Magisk 20.0, the phone stays on the "Pocophone" screen seemingly forever. Uninstalling it with a Magisk Uninstaller makes the device boot up again.
EDIT: Solved thanks to @thomas140 - Magisk 17.1 was the key
This is what I've done to get it to work:
- Flash Magisk Uninstaller
- Flash Magisk 17.1 or 17.0
- Wipe data/cache
- Boot to OS, update Magisk Manager to latest version
- Go back to recovery and flash Magisk 20.0 (or whatever the latest version is at the moment you're reading this)
- It works!
Click to expand...
Click to collapse
No need to complicate things unnecessarily. Just install and boot miui.eu normally, no internal wipe or anything, do usual setups, boot into twrp, install latest magisk and done. It'll boot normally.
---------- Post added at 02:58 AM ---------- Previous post was at 02:54 AM ----------
Urzu18 said:
Read Carefully..
Flash miui 11 eu
Flash DisableForceEncryption_treble_v18 - if you don't want encryption
Click to expand...
Click to collapse
Miui.eu is already decrypted by default. No need to flash DFE, you'll get bootloop.
kurogami95 said:
No need to complicate things unnecessarily. Just install and boot miui.eu normally, no internal wipe or anything, do usual setups, boot into twrp, install latest magisk and done. It'll boot normally.
---------- Post added at 02:58 AM ---------- Previous post was at 02:54 AM ----------
Miui.eu is already decrypted by default. No need to flash DFE, you'll get bootloop.
Click to expand...
Click to collapse
Oh Alright I didn't get bootloop when I flash DFE as I confused miui 11 eu as encrypted I know the previous version are not though.
Some of the user xiaomi miui or eu doesn't work as intended when I flash magisk same thing happened to me.
The best solution so far is download the latest Magisk 20.1 and download Pitchblack TWRP
Flash recover pitchblack.
If it you can't flash extract the image in TWRP folder then flash it as image then flash pitchblack zip again
wipe dalvil/art cache, cache, system, data
flash miui 11 flash magisk 20.1 done.
kurogami95 said:
No need to complicate things unnecessarily. Just install and boot miui.eu normally, no internal wipe or anything, do usual setups, boot into twrp, install latest magisk and done. It'll boot normally.
Click to expand...
Click to collapse
Except that's exactly what I did, and I got into a bootloop. I wouldn't have created this thread if that wasn't the case.
I did a clean install (factory reset & format data) of Xiaomi.eu 9.12.12 from global stable this morning and didn't have any issues flashing the MIUI Magisk 19.4. I am on the Mi Mix 3 though
Related
It seems it is impossible to get root with magisk on latest Oreo stock. Maybe someone found solution?
I asked and I answer =)
To get the root it is required to
- install latest TWRP (current version twrp-3.2.1-0)
- reboot to TWRP
- install 16.2 or higher magisk, link for 16.2
- install f2fs bug workaround
- reboot system
- install magisk Manager
- enjoy your root =)
dolar4ik said:
I asked and I answer =)
To get the root it is required to
- install latest TWRP (current version twrp-3.2.1-0)
- reboot to TWRP
- install 16.2 or higher magisk, link for 16.2
- install f2fs bug workaround
- reboot system
- install magisk Manager
- enjoy your root =)
Click to expand...
Click to collapse
its not work for me:crying:
Try to follow this guide then: https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
But use latest magisk beta instead of suggested 15.3.
And keep in mind that it is possible to easily restore working state with magisk uninstaller.
Do you have any errors during magisk or workaround installation in twrp console?
dolar4ik said:
Try to follow this guide then: https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
But use latest magisk beta instead of suggested 15.3.
And keep in mind that it is possible to easily restore working state with magisk uninstaller.
Do you have any errors during magisk or workaround installation in twrp console?
Click to expand...
Click to collapse
now its working for me.:highfive::highfive:
dolar4ik said:
I asked and I answer =)
To get the root it is required to
- install latest TWRP (current version twrp-3.2.1-0)
- reboot to TWRP
- install 16.2 or higher magisk, link for 16.2
- install f2fs bug workaround
- reboot system
- install magisk Manager
- enjoy your root =)
Click to expand...
Click to collapse
Hi, does not work for me, stuck at bootloader logo, tried Magisk, followed the steps many times but nothing, can you help please ?
evnimaster said:
Hi, does not work for me, stuck at bootloader logo, tried Magisk, followed the steps many times but nothing, can you help please ?
Click to expand...
Click to collapse
follow this: https://forum.xda-developers.com/mot...reo-8-t3743273
Code:
echo keepverity=true>>/data/.magisk
echo keepforceencrypt=true>>/data/.magisk
Is there a way to remove encryption already?
Remove root?
Is it possible to remove root and the TWRP without hard reset? Does anyone already have the original recovery of Oreo?
DavidKalil10 said:
Is it possible to remove root and the TWRP without hard reset? Does anyone already have the original recovery of Oreo?
Click to expand...
Click to collapse
There is magisk uninstaller provided in official thread.
To remove twrp you just need to flush original recovery via fastboot
Hello guys, can I have some advice on whether I should install this latest Oreo update on my moto z, how is the battery doing on this update? And overall experience?
@dolar4ik
i reflash the stock oreo ROM,then flash TWRP,flash magisk,flash f2fs bug workaround, stuck at bootloader logo,how can i do it??
Flash the Magisk uninstaller, reboot to recovery (you have this option in TWRP) and flash again only the Magisk 16.3 (without the f2fs bug workaround). This worked for me two days ago.
Today I updated to the latest Magisk 16.4 without any problems.
lesbianu said:
Flash the Magisk uninstaller, reboot to recovery (you have this option in TWRP) and flash again only the Magisk 16.3 (without the f2fs bug workaround). This worked for me two days ago.
Today I updated to the latest Magisk 16.4 without any problems.
Click to expand...
Click to collapse
still not work for me.:crying::crying:
---------- Post added at 03:12 AM ---------- Previous post was at 02:58 AM ----------
This is strange. It works on Oreo OTA but it does not work in full flash Oreo ROM.
have anyone help me??
rakee said:
It works on Oreo OTA but it does not work in full flash Oreo ROM.
Click to expand...
Click to collapse
This is right.
I re-flashed my phone using the OPL27.76-51 firmware. Now, no way to install Magisk (old, new, any version).
The solution, I restored a TWRP backup made at the first bootloader unlock (when the ROM was updated only using OTAs, not flashed). Immediately I was able to install Magisk 16.4 - without any F2FS workaround.
HERE is my TWRP backup containing the partitions: Boot, Data & System. Hope it helps!
rakee said:
@dolar4ik
i reflash the stock oreo ROM,then flash TWRP,flash magisk,flash f2fs bug workaround, stuck at bootloader logo,how can i do it??
Click to expand...
Click to collapse
Uninstall magisk with it's own uninstaller.
I installed Magisk on the full Oreo release and everything is working.
I did make a "less bloat, less bs" zip version but I doubt it would make a change.
If you guys want, I can upload it when I get home.
The Marionette said:
I installed Magisk on the full Oreo release and everything is working.
I did make a "less bloat, less bs" zip version but I doubt it would make a change.
If you guys want, I can upload it when I get home.
Click to expand...
Click to collapse
Could you provide your twrp ZIP Version? That would be great.
lesbianu said:
This is right.
I re-flashed my phone using the OPL27.76-51 firmware. Now, no way to install Magisk (old, new, any version).
The solution, I restored a TWRP backup made at the first bootloader unlock (when the ROM was updated only using OTAs, not flashed). Immediately I was able to install Magisk 16.4 - without any F2FS workaround.
HERE is my TWRP backup containing the partitions: Boot, Data & System. Hope it helps!
Click to expand...
Click to collapse
Just got myself a hand me down Moto z.
My friend who gave it to me hasn't touch the phone for a year.
So i started with 6.0 and after multiple updates, now i am on Oreo.
Since i have done ota from Marshmallow, would this method work?
Bootloader was never unlocked.
thanks for any input
In next 2 weeks my mi pad 4 LTE will come to me.
Could you tell me, how to root it by magisk?
1) unlock it by xiaomi (360 hours waiting)
2) flash twrp
3) flash magisk
4) reboot
That is all I need to do to get a root ?)
Tysovwik said:
In next 2 weeks my mi pad 4 LTE will come to me.
Could you tell me, how to root it by magisk?
1) unlock it by xiaomi (360 hours waiting)
2) flash twrp
3) flash magisk
4) reboot
That is all I need to do to get a root ?)
Click to expand...
Click to collapse
yes
Usually you don't even have to flash TWRP recovery if you want to keep original recovery, you can just boot it with "fastboot boot twrp.img".
Just a FYI, the latest magisk 17 has not been working for me. Magisk 16 works just fine.
I am on the xiaomi.eu rom
I'm on latest xiaomi.eu and Magisk 17.1 is working fine
bartekm01 said:
I'm on latest xiaomi.eu and Magisk 17.1 is working fine
Click to expand...
Click to collapse
After I flash magisk 17.1 , my mipad 4 can't use LTE
簡_OvO said:
After I flash magisk 17.1 , my mipad 4 can't use LTE
Click to expand...
Click to collapse
That's strange... I've using magisk on 6 device's and never had this sort of problems. Uninstall magisk and check if it's working again
@簡_OvO
On what Rom you have this problem with Magisk ?
I use Mi Pad 4 LTE and Magisk 17.1 on AOSP 8.1_v25 and everything works as it should.
Magisk it has nothing to do with Modem/Baseband he patching Kernel.
After using Magisk uninstaller or restore stock Kernel works for you LTE ?
bartekm01 said:
That's strange... I've using magisk on 6 device's and never had this sort of problems. Uninstall magisk and check if it's working again
Click to expand...
Click to collapse
After I flash again, it can work well
---------- Post added at 11:25 AM ---------- Previous post was at 11:22 AM ----------
Andro_Nicus said:
@簡_OvO
On what Rom you have this problem with Magisk ?
I use Mi Pad 4 LTE and Magisk 17.1 on AOSP 8.1_v25 and everything works as it should.
Magisk it has nothing to do with Modem/Baseband he patching Kernel.
After using Magisk uninstaller or restore stock Kernel works for you LTE ?
Click to expand...
Click to collapse
I use MIUI10.I cannot understand why.But after I flash magisk again,LTE works well.
Could you please explain where I find the mipad 4 boot image when using this method to patch it?
When choosing the option in magisk manager to patch boot image I have to search for the original boot image to patch as the app doesn't point staight to it...
Many thanks
@Tysovwik, I see you want keep miui. You have to block overwriting recovery by original one. I have seen option for it in twrp, but i have not tested it. The same you can have if you use special zip package.
Twrp has second option for auto install magisk 17.1, but i installed it from zip file (twrp labeled 20.12.2018 can have 18.0)
is this the best way to Root a Mi Pad 4 LTE ?
A long time ago someone said:
Tysovwik said:
In next 2 weeks my mi pad 4 LTE will come to me.
Could you tell me, how to root it by magisk?
1) unlock it by xiaomi (360 hours waiting)
2) flash twrp
3) flash magisk
4) reboot
That is all I need to do to get a root ?)
Click to expand...
Click to collapse
My plan is to follow this process.
Does anyone know if I still have to do step (1) ? or how that is done ?
Some noobie questions.
I already have TWRP installed in my Mi pad 4, and want to keep my original MIUI rom
To install Magisk what should I do next?
Just flash magisk from twrp?
Do I need to flash no-verify-opt-encrypt.zip?
Select any option of wipe in twrp before flashing Magisk?
If I get a bootloop can I just use Magisk unistaller?
soulgazer said:
Some noobie questions.
I already have TWRP installed in my Mi pad 4, and want to keep my original MIUI rom
To install Magisk what should I do next?
Just flash magisk from twrp?
Do I need to flash no-verify-opt-encrypt.zip?
Select any option of wipe in twrp before flashing Magisk?
If I get a bootloop can I just use Magisk unistaller?
Click to expand...
Click to collapse
I would wipe cache /dalvik cache before and wipe cache again after flashing. But yeah, just flash the magisk zip. You check in the settings under security if your device is encrypted, which I'm guessing it probably is already. In which case there's no need to flash no verify encrypt zip. Unless you want to have no encryption. In which case you'll have to start all over, complete format in twrp then flash magisk and no encrypt zip before first boot.
If you want to stay encrypted (assuming you are already), just flash magisk. I haven't done it in a while! So not sure if magisk manager will be installed with zip flash, if it's not there when you boot to system, just download and install latest magisk manager. You can always then download a root checker app from playstore to be sure all went well.
Good luck dude
There will(hopefully) be a lot of otas coming to Poco F1 for bug fixing. So if we are rooted with Magisk we cannot install Otas directly as magisk modifies our stock boot image. And since poco doesn't have A/B partitions we cannot install OTA's and still keep Magisk. That brings us to Flashfire which can preserve root. Flashfire doesn't work on MIUI 9.6.14.0 (it doesn't work on mine) .So how do we install OTAs while preserving Magisk ? Is it possible or do we have to flash stock recovery and stock boot image and lose magisk ?
OTA update method according to topjohnwu:
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md
Would be helpful if somebody can post a diy in the guide section on how to apply OTAs on Magisk rooted devices.
I would be very interested as well!!
Go to recovery.
Flash Magisk zip to restore old kernel backup.
Boot to system, you will not have root.
Update.
You still have TWRP, install Magisk again.
Profit.
I did flash my ota via stock recovery . You need flash stock recovery then go to system update after done go back to twrp and your magisk
abdohop said:
I did flash my ota via stock recovery . You need flash stock recovery then go to system update after done go back to twrp and your magisk
Click to expand...
Click to collapse
Could you please be more specific?
1. Flash stock recovery (so you loose Twrp)
2. Boot to System and make update
3. Flash twrp again and root again with Magisk?
Thanks
---------- Post added at 07:59 AM ---------- Previous post was at 07:57 AM ----------
trax7 said:
Go to recovery.
Flash Magisk zip to restore old kernel backup.
Boot to system, you will not have root.
Update.
You still have TWRP, install Magisk again.
Profit.
Click to expand...
Click to collapse
You mean that flashing Magisk again will "undo" root?
DoudouJack said:
You mean that flashing Magisk again will "undo" root?
Click to expand...
Click to collapse
Yes.
trax7 said:
Yes.
Click to expand...
Click to collapse
Hi, just booted into TWRP and flashed Magisk zip file, I'm still rooted.
Do you mean then the uninstaller Magisk file? If so, it will remove packages as well and root will still be there... Could you please be more explicit? Thanks!
DoudouJack said:
Hi, just booted into TWRP and flashed Magisk zip file, I'm still rooted.
Do you mean then the uninstaller Magisk file? If so, it will remove packages as well and root will still be there... Could you please be more explicit? Thanks!
Click to expand...
Click to collapse
Magisk makes a backup of ur boot.img, which you need to use OTAs, to restore it, you can flash Magisk again to restore it. (that's how it should work)
trax7 said:
Magisk makes a backup of ur boot.img, which you need to use OTAs, to restore it, you can flash Magisk again to restore it. (that's how it should work)
Click to expand...
Click to collapse
In my case flashing Magisk again did not work. From Magisk Manager -> Uninstall either since it was "unable to download".
For those who would be in the same case, I did following steps to update:
- Download latest Magisk uninstaller (currently 17.3, I tested with 17.1 & 17.2)
- Boot into TWRP (I use an app for convenience), go to Install > flash the Magisk uninstaller zip and (optional) boot to system to make sure root is gone (with Root Checker e.g.)
- Power off device and boot into Fastboot, flash stock boot.img (you can find it in the ROM folder you used to install your ROM), boot to System and install OTA update via the update manager, then reboot
- At this point I was stuck in fastboot screen, I simply booted with TWRP (with decryption working) and it took care of installing the update, I then flashed Magisk from there.
DoudouJack said:
Could you please be more specific?
1. Flash stock recovery (so you loose Twrp)
2. Boot to System and make update
3. Flash twrp again and root again with Magisk?
Thanks
---------- Post added at 07:59 AM ---------- Previous post was at 07:57 AM ----------
You mean that flashing Magisk again will "undo" root?
Click to expand...
Click to collapse
Correct
Sandepp said:
There will(hopefully) be a lot of otas coming to Poco F1 for bug fixing. So if we are rooted with Magisk we cannot install Otas directly as magisk modifies our stock boot image. And since poco doesn't have A/B partitions we cannot install OTA's and still keep Magisk. That brings us to Flashfire which can preserve root. Flashfire doesn't work on MIUI 9.6.14.0 (it doesn't work on mine) .So how do we install OTAs while preserving Magisk ? Is it possible or do we have to flash stock recovery and stock boot image and lose magisk ?
OTA update method according to topjohnwu:
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md
Would be helpful if somebody can post a diy in the guide section on how to apply OTAs on Magisk rooted devices.
Click to expand...
Click to collapse
Try this guide, https://forum.xda-developers.com/poco-f1/how-to/step-step-guide-flashing-ota-beta-t3878730
Darklouis said:
Try this guide, https://forum.xda-developers.com/poco-f1/how-to/step-step-guide-flashing-ota-beta-t3878730
Click to expand...
Click to collapse
Its ok I have already flashed several OTAs, custom roms and kernels on my pocophone.
Sandepp said:
Its ok I have already flashed several OTAs, custom roms and kernels on my pocophone.
Click to expand...
Click to collapse
Is that so? What custom recovery you used?
Darklouis said:
Is that so? What custom recovery you used?
Click to expand...
Click to collapse
Twrp with working decryption
Sandepp said:
Twrp with working decryption
Click to expand...
Click to collapse
About that recovery, data partition will not get encrypted when you flash OTA update?
Darklouis said:
About that recovery, data partition will not get encrypted when you flash OTA update?
Click to expand...
Click to collapse
It will but I am ok with encryption. If you don't want then flash disable force encryption from twrp after flahsing the ota or flash magisk which will disable force encryption.
Sandepp said:
It will but I am ok with encryption. If you don't want then flash disable force encryption from twrp after flahsing the ota or flash magisk which will disable force encryption.
Click to expand...
Click to collapse
Nice nice.. Thanks for the tip
Darklouis said:
Nice nice.. Thanks for the tip
Click to expand...
Click to collapse
You're welcome
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
ultramag69 said:
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
Click to expand...
Click to collapse
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
fajniejest said:
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
Click to expand...
Click to collapse
I am new on this forum (pocophone) and i seee how messed up it is. You should definitly use official twrp
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
tnsmani said:
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
Click to expand...
Click to collapse
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
fajniejest said:
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
Click to expand...
Click to collapse
Well Here is how i managed it to work. After i unlocked my bootloader i launched twrp and flashed beta magisk 19.0 (not latest anymore because 19.1 just today showed up) then i reminded that i forgot about DisableForceEncryption_Treble_v18.0.zip so i flashed iit and after it flashed again magisk 19.0, after reboot it everything was fine
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'flashboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
The command is 'fastboot boot twrp-<version>.img'
tnsmani said:
The command is 'fastboot boot twrp-<version>.img'
Click to expand...
Click to collapse
Thanks for the correction. I really don't know where I got flashboot from.
Cheers!
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
So, to make it clear (and to not brick my poco... ):
1. I should use TWRP image from this link --> https://twrp.me/xiaomi/xiaomipocophonef1.html...
2. ...and I don't need to replace my recovery - just booting it once (as You described) is enough.
3. I should flash Magisk's ZIP, not MagiskManager's ZIP or Magisk.apk
4. No more flashing, clearing data and other operations needed.
Am I right?
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
guhvanoh said:
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Click to expand...
Click to collapse
Big thanks! Finally dealt with it. So grateful for Your help. :victory:
Dearminder said:
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
Click to expand...
Click to collapse
Yes, I do. I've not tried it though...
Hi i have update my poco to the xiaomi.eu beta 9.6.27 and i want to install magisk 19.3 or 19.1. But when i do this on trwp i can't boot. i have to uninstall magisk to boot again.
I try to disable encryption but that doesn't work.
I try to install magisk 18.1 and that works. I don't understand why magisk 19.x can't be install.
Can someone help me please.
elpigeondindo said:
Hi i have update my poco to the xiaomi.eu beta 9.6.27 and i want to install magisk 19.3 or 19.1. But when i do this on trwp i can't boot. i have to uninstall magisk to boot again.
I try to disable encryption but that doesn't work.
I try to install magisk 18.1 and that works. I don't understand why magisk 19.x can't be install.
Can someone help me please.
Click to expand...
Click to collapse
maybe try updating through magisk manager
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
elpigeondindo said:
Hi i have update my poco to the xiaomi.eu beta 9.6.27 and i want to install magisk 19.3 or 19.1. But when i do this on trwp i can't boot. i have to uninstall magisk to boot again.
I try to disable encryption but that doesn't work.
I try to install magisk 18.1 and that works. I don't understand why magisk 19.x can't be install.
Can someone help me please.
Click to expand...
Click to collapse
suritsuwal said:
maybe try updating through magisk manager
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
Click to expand...
Click to collapse
I try it but it's the same :crying:
elpigeondindo said:
I try it but it's the same :crying:
Click to expand...
Click to collapse
it could also be because of older twrp; make sure u have latest twrp because its working for me
suritsuwal said:
it could also be because of older twrp; make sure u have latest twrp because its working for me
Click to expand...
Click to collapse
I have trwp 3.3.0-0
How you update your poco?
for me i download the update, i go in trwp and i flash it. i start my and wait . whe, it starts , i reboot in trwp and flash magisk-19.3.zip but after it doesn't boot.
I try to flash the rom, after flash magisk but that do the same
elpigeondindo said:
I have trwp 3.3.0-0
How you update your poco?
for me i download the update, i go in trwp and i flash it. i start my and wait . whe, it starts , i reboot in trwp and flash magisk-19.3.zip but after it doesn't boot.
I try to flash the rom, after flash magisk but that do the same
Click to expand...
Click to collapse
i flashed rom and magisk together and it booted fine. i'm on pitch black recovery btw
I can change trwp for pitch Black recovery ?
Installed Magisk 19.3 after flashing EU 9.6.27 and it work. TWRP 3.2.3-0
Most people have issues with TWRP 3.3.0, I also had that issue too some time ago , so I stayed 3.2.3-0 before flashing Multirom.
try flash TWRP 3.2.3-0 then flash magisk 19.3, if it work, flash TWRP after, but I recommend to stay 3.2.3
i try 3.2.3 but the same things. It's very strange. do i have to do a wipe ?
hy
i am on EU 9.6.27 and TWRP 3.2.3-2 officel.
test it...
flash... TWRP 3.2.3-2 flash... EU 9.6.27 from TWRP 3.2.3-2 then flash TWRP 3.2.3-2 again... flash magisk 19.3 clear cache... restart
I have do a wipe reset and flash magisk 19.3. all is ok. I have just lost all data but i reinstall all