I installed this (Havoc-OS-v3.0-20191105-beryllium-Official.zip) version of Havoc os. This rom has some issue,
1. Battery is charging upto 80% then it stuck.
2. There is no devoloper options in settings
3. Sometimes display stuck
4. now i was trying to get back to the previous version of havoc os, every rom i flash it says 'zip file is corrupt' except this (Havoc-OS-v3.0-20191105-beryllium-Official.zip).
I can't install any other rom like pixel experience, evolutionx, superior os . All the time it says 'zip file is corrupt'.
Now i am kinda stuck to this rom (Havoc-OS-v3.0-20191105-beryllium-Official.zip).
What should i do?
Related
Hello there, i have a problem flashing some custom ROMs, for example the Resurrection remix, i scrolled to the download section and select my device name, which in the site is named Libra, and i downloaded the ROM and tried to flash but it says that the ROM is not compatible in my device dunno why .
The only ROM i could flash was the UNNOFICIAL Lineage OS 7.1 . I tried the RR, Mokee and AICP and i couldn't flash none.
So i found videos and posts saying that you can avoid error 7 when flashing by deleting the first asserts in the updater binary script which ignores the device version verification and i suceeded, installed the ROM anyway BUT when i reboot for the first time it's doesn't boot it stays on a loop forever.
And my question is what am i doing wrong here?
I have TWRP 3.0.2-0 by TeamSuperLuminal and my device is the 2 GB RAM and 16 GB version of the Mi 4C.
A month ago I tried installing Android 9.0 ROM and i got reboot loop after I did the phone setup. I tried different ROMs and everything had the same problem. Even twrp will also stop showing any files in the device and I need to change the file system and revert it back again then mount my phone to desktop and transfer the ROM. I was told that it was because of me not installing MIUI 10 before trying it. So today I installed MIUI 10 and tried installing lineage 16.0 and got the same problem. Phone starts going into reboot And recovery does not show any files!
Please help me from this hell! I'm hating this MIUI.
mynameisvineeth said:
A month ago I tried installing Android 9.0 ROM and i got reboot loop after I did the phone setup. I tried different ROMs and everything had the same problem. Even twrp will also stop showing any files in the device and I need to change the file system and revert it back again then mount my phone to desktop and transfer the ROM. I was told that it was because of me not installing MIUI 10 before trying it. So today I installed MIUI 10 and tried installing lineage 16.0 and got the same problem. Phone starts going into reboot And recovery does not show any files!
Please help me from this hell! I'm hating this MIUI.
Click to expand...
Click to collapse
First of all I have to assume that you are sure that you have Redmi 5 plus (Vince) and not Redmi Note 5 Pro (Whyred), if this is the case let´s go to the next.
Any Miui rom encrypts data by default at least from oreo so no way to avoid this, if you flash a Miui rom then your data wont´be accesible and the next rom to be flashed you have to sideload it via adb (there are other ways).
I think you missed something here, if you flash a mui rom and over it a pie rom then there´s no way that your device reboots to system. You only have to flash firmware 8.1 from miui not the whole rom.
Start this from the scratch; I recommend OrangeFox recovery instead of TWRP so it has more features https://forum.xda-developers.com/re.../official-orangefox-recovery-project-t3807479
- Before to flash nothing In orangeFox recovery enable the options DM-verity and disable force encryption, you will find too options to keep OTA and others, check which you want.
- Flash the firmware miui 8.1 https://androidfilehost.com/?fid=11410963190603850663
- Flash the pie rom for vince (may not apply for a GSI pie)
- Flash the Gapps (if needed)
it´s all.
Just a tip; be careful with changing system of files at any time so if the process is cutted/interrupted for some reason your device could be seriously damaged.
it does. you just need to flash firmware file first.
Hello, I have problem with my lenovo A6010 every time I install a new ROM whether it is stock or custom, I properly install them but can't load OS but stick to device logo then again thanks to a zip lineage ROM 14.1 I have which I install & it working good
My device is lenovo A6010 after lineage OS it changes into lenovo k31-t3 can't property run apps or install root I want to install new ROM but failed every time I triedI, also install SuperSu from twrp it successfully install there but it sticks on reboot on twrp & back to OS it says root is unsuccessful.., I can't root can't load new ROM struggling to find problem bcz new ROM stick to logo screen forever but lineage OS ROM install successfully & work like a charm
So, I've managed to boot into twrp & I wiped all my data & then flashed lineage os (attachment) & rebooted but it didn't reboot into lineage os instead it went into that bootloader unlocked warning & then went black & now If I restart I can go back to that & then back to black. I did not flash magisk on it since the whole process of doing that changed recently now requiring you to do that from some kind of an app on an actually working os so I figured that I'll just install it from lineage os & as (from what I know) it's not required, not having magisk shouldn't be the issue. Any ideas?
did you flash vendor? some Android 11 ROMs are vendor-less, needs you to download Android 11 vendor from your device group, I suggest telegram. anyways you can look for a ROM that has "vendor included" note to avoid that for easier flash.
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
To check:
TWRP/O.F
wipe/format data type yes
reboot Twrp/O.F
Flash latest firmware (if necessary).
Flash the rom as instructed by the OP.
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
Use TWRP by REIGNZ based on A12 system_ext. You can find it my POCO F1 Ultimate Collection & Guides along with Guides for clean installation.
P.S: Near the link of twrp by reign you will also find a link for the current bugs/issues and workaround for them.