LeEco Le Pro 3 stuck in fastboot mode - Android Q&A, Help & Troubleshooting

I have a LeEco Le Pro 3 phone firstly i tried to root it using the tutorial i found here on how to flash the TWRP Recovery & Root the Le Pro 3 device. I followed the instructions and got to flashing the twrp recovery successfully but it wouldn't boot to the twrp recovery using the power+volume up button neither would it boot up normally the LeEco logo would just flash and it went blank. I eventually got it to boot to the recovery by putting it into the fastboot mode and using the adb fastboot method by typing "fastboot boot recovery recovery.img" i then tried to install the supersu and it install but it still wouldn't boot up normally nor to the twrp recovery still had to use the adb fastboot method. I made the mistake of not doing a back up before I did the wipe. I then figured maybe the OS got corrupted so I downloaded a stock rom and use adb sideload to get it on the storage of the phone. i made another mistake of not wiping the data before i restarted the phone now i can only get it into fastboot mode and i can see it when i do a "fastboot devices" check but it will take no other command as the bootloader is locked. Is there any solution to get the bootloader unlocked again. when i try to unlock it using the adb command "fastboot oem unlock-go" it return the reply "(failed remote oem unlock is not allowed)" fastboot error command failed. Please any help would be greatly appreciated

Related

TWRP flashes but fails to boot: OnePlusX

My OPX is running marshmallow 6.0.1 oxygenos 3.1.3 for the past 1 week or a bit more after the OTA update.
I had unlocked the bootloader 2.5 - 3 weeks ago when it had lolipop but I didn't install twrp. It is still unlocked after the update obviously (i have properly checked the oem unlock by the fastboot command fastboot devices oem and advanced reboot). I downloaded the latest twrp version for the OPX: twrp-3.0.2-0-onyx.img (link: https://dl.twrp.me/onyx/) from the official site. I renamed the file to "twrp" In fastboot mode, I used the command: fastboot flash recovery twrp.img. It flashed successfully, as the 2 "OKAY"s appeared. After flashing was over, I used the recovery boot command: fastboot boot twrp.img which FAILED and gave an error- remote: dtp not found. Then I switched off the device using the power button and the tried the recovery mode combination i.e power button + volume down. Although the phone started, it didn't boot into the recovery and got stuck at the "oneplus powered by android" screen. I tried the combination again after which it switched off and returned to and got stuck at that same screen. Frustrated, I rebooted into the OS using the fastboot reboot command and booted into the recovery using advance reboot. To my dismay, I still had the stock recovery. The only difference in the recovery was that it wanted me to choose a language and then it started, just like when i had first booted into the recovery after buying the phone many months ago. I have tried this whole thing 2 times but with no luck! The twrp recovery flashes but fails to boot by any means, be it that fastboot command, the recovery mode combination after flashing successfully (and enter the boot command which fails) where it gets stuck on "oneplus powered by android screen" and rebooting into OS and booting into recovery using advance boot where the OS has already replaced twrp with the stock recovery.
PLS HELP!!
This is the guide I followed- https://forums.oneplus.net/threads/...om-recovery-root-take-efs-backup-more.401713/
And also, I used this video for reference- https://www.youtube.com/watch?v=RwYmyXyJeww

Oneplus X brick

Hello guys,
i have a bricked rooted oneplus x
I had issues with the rooted rom so i flashed the newest stock rom via twrp
The phone boots up and showed the usual otimizing apps message. After the proccess is done it just the usual "let me helpt set up your phone page" and then restarts
I cant acces twrp anymore and when i try to acces the stock recovery it just shows a oneplus logo
I do have access to fastboot though (i hope that leaves some hope)
I have tried the MegaUnbrickGuide here in the forum but i wasn't able to install the drivers i need for that method
One more thing whenever i try
Code:
fastboot boot recovery.img
i get the "remote dtb not found" message
Does that have to do with developer options not being unlocked?
Any ideas on how to just get some form of working os installed on the device
(i dont care wheter rooted or not at this point have been trying stuff for hours now)
regards
Jan
First download Minimal ADB and Fastboot and install it.
Go into fastboot mode.
1. Re-unlock your bootloader using the command - fastboot oem unlock
2. After doing that, download the latest version of TWRP(which at the time of writing this is 3.1.0) and rename it to 'recovery.img'
3. Open a command window in the place you have downloaded the recovery by pressing the shift key and right clicking and then choosing the option Open Command WIndow Here... Flash the recovery using the command fastboot flash recovery recovery.img
4. Boot into it using the command fastboot boot recovery.img
5. If it still gives 'remote dtb not found' then follow this guide: https://forum.xda-developers.com/oneplus-x/help/opx-remote-dtb-solution-t3480274
6. If it boots into recovery, your phone is now fine and go ahead and flash whatever ROM you want.
Cheers!

stuck at MI logo

I was triying to root a Redmi Note 2, so I download adb drivers and fastboot, also TWRP scorpio and hermes, not sure which one I tried first
so I boot on fastboot mode
then I checked the phone with
Code:
fastboot devices
then flash twrp
Code:
fastboot flash recovery twrp.img
now I wanted to boot on recovery, and I thinks this is the main problem
Code:
fastboot flash boot twrp.img
then
Code:
fastboot reboot
now I'm stuck at MI logo, but I can access fastboot mode, please help me, what i should do? thanks
You flash twrp to boot, you must reflasth boot to original boot

Mi pad. Not booting into fastboot and TWRP recovery

Hello all,
I am stuck in this problem. Would appreciate any help.
Working in LINUX ubuntu 18.
Got a MI pad 1 with locked bootloader.
flashed TWRP recovery using fastboot. Booted into TWRP successfully.
Flashed the files from this
https://www.techeia.com/2018/10/best-custom-rom-for-mi-pad-1-2018.html
Everything flashed successfully.
Rebooted only to be stuck into MI logo screen. Bootloop probably because of locked bootloader.
Hence, I decided to wipe the bootloader itself
got the hint from here https://forum.xda-developers.com/mi-pad/how-to/fix-fastboot-bootloop-fix-xiaomi-mi-pad-t4008653
but I didn,t wiped recovery. but erased everything else. Then powered off to boot into previously installed TWRP recovery.
From there, I am trying to boot into fastboot or TWRP but the screen is showing blank. I am using the key pattern for fastboot or recovery and trying to detect the device into any mode through ubuntu terminal using
sudo fastboot devices and
adb devices
but its not detecting the device there also. USB debugging was enabled already.
Any clues for how can I boot into fastboot or TWRP from this.
Regards
Hiteshkartik
@hiteshkartik
A device with erased boot-loader never can work: you simly get a black screen. You no longer can communicate with it - neither via ADB nor via Fastboot.
Can I have a way around ?? I mean installing bootloader or somehow booting into fastboot or TWRP directly with any toolkit or terminal.

Gionee P5W Bootloop due to incorrect flashboot commands

I was trying to flash TWRP in Gionee P5W. The steps I followed were:
1. adb reboot bootloader
2. fastboot oem unlock
3. fastboot flash recovery recovery.img (had prepared TWRP img file already)
4. fastboot reboot recovery
I later found out that the last command should had been fastboot boot recovery.img.
Now my phone is stuck in bootloop. I tried going into recovery (vol-up + power) but I only gat the gionee logo and then the boot loop. What is the condition with my phone and is there something that can be done?

Categories

Resources