Last updated May 2020
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Objectives :
Have root using Magisk
Be able to install OTA from the settings without bootloops
Avoid boot loop
Very important :
This will work with ANY Xiaomi phone, and should work with ANY ANDROID phone as well. The difference between phones would be in where you can get your boot image from.
Your phone has to have an unlocked bootloader
Your phone has to have stock recovery. TWRP WILL cause bootloop for root and/or OTA updates from system.
I like to have root with magisk and don't want to install TWRP because I want to be able to install OTA from system without boot loops. This guide will help you achieve this with ease.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
https://youtu.be/KsxHial1v1U
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
https://youtu.be/USHcCMYlexM
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
fastboot reboot
Click to expand...
Click to collapse
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Update May 2020
Hello again,
Sorry for being away for so long. Here are some of the things I have noticed people are confused with and need to make them clear:
This method works for ANY Android phone. As long as you have the Correct boot.img and can unlock the bootloader
MAKE SURE 100% you have the correct boot.img file for your CURRENT ROM
MAKE 100% SURE, the boot.img file you get from the FULL ROM zip file, not an OTA update zip file
Make sure you check the date and time of the "magisk_patched.img" file to make sure that is the one you made
Make sure you use the LATEST magisk manager
Make sure you open magisk after flashing the magisk_patched.img as boot image. Magisk manager will tell you if there is another step needed, just click yes and it will be done in seconds
Make sure to enable "Hide Magisk" to allow you to have your BANK apps working as well as security checks
If any app you use gives you an error "YOU ARE Rooted bla bla bla" Use magisk manager to hide the root for this specific app (in the settings)
That's all I can remember, good luck
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Kiwironic said:
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Click to expand...
Click to collapse
After fastboot flash, reboot, open magisk manager, tap INSTALL beside "magisk is up to date". Then select direct install; reboot.
Works on MIUI 11.0.2; davinciin. ??
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
People report different amounts of wait time, depends on the mi account I think
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Can do with locked bootloader?
Micdu70 said:
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Click to expand...
Click to collapse
Thank you man :good:
Sent from my Xiaomi Mi 9T using XDA Labs
Cabeção-Flu said:
Can do with locked bootloader?
Click to expand...
Click to collapse
No, bootloader has to be unlocked.
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Lazer Bear said:
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Click to expand...
Click to collapse
I had root on MIUI10 and updated the ROM to MIUI11 then did my root again the way mentioned and did NOT have to wipe. You can get OTA anyway, it will try the update first, it will fail, then it download and install a full ROM zip automatically. You have to wait for it to do that twice, that's all. The first boot after the update takes some time.
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
kryzeK said:
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
Click to expand...
Click to collapse
If you flash the full rom, chances of bootloop is minimal. And should have stock experience except for being unlocked.
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
stone_henge said:
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
Click to expand...
Click to collapse
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
oblyvision said:
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
Click to expand...
Click to collapse
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Kiwironic said:
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Click to expand...
Click to collapse
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
On first installation MM asks to download what it needs e.g. to verify SafetyNet. Allow and there is no problem about. TWRP is generally not needed to install Magisk. Things are documented in Magisk guides
https://topjohnwu.github.io/Magisk/
https://www.didgeridoohan.com/magisk/HomePage
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Kiwironic said:
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Click to expand...
Click to collapse
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
oblyvision said:
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
Click to expand...
Click to collapse
You have to understand the requirements :
- stock recovery
- install magisk manager app
- patch the boot image for your stock ROM (same version on your phone)
- flash that Patched boot image.
- reboot
- done, that's magisk installed
Related
Hi to all. I'm new in Honor world and I've stopped my Android experience with KitKat so I'm a little bit confused ...
I've read several guides (on XDA too) that that three steps to obtain root are unlock bootloader, flash TWRP via ADB and then install Magisk or SuperSU via TWRP. But in the thread on TWRP is clearly written that to install Magisk decryption is needed and to have decryption we must flash a kernel with encryption disabled in fstab. But no guide says anything about this step. Can someone explain me how encryption/decryption work doing a standard installation of TWRP ? Is needed a flash of a modified kernel ? And where find it ?
And another question (if it's not too much ). Since I don't need to install custom rom (I want root only to use some apps like Titanium) how can I make a backup of stock rom, boot.img, efs partition and all that can be useful to restore phone to the starting point if, by chance, I need Huawei warranty ?
Thanks a lot
Hi, apparently there's a way to get root on an encrypted system. Follow the rebrand guide and then flash supersu in TWRP via ADB sideload. It worked for me and a few others, there is no comment from the developers as of right now.
So basically in short follow this guide until you are finished with the TWRP section:
https://forum.xda-developers.com/honor-9/how-to/one-guide-recovery-os-roms-t3661829
Then
- enter twrp
- adb sideload supersu
Afterwards follow the "rooting!" section with point 2
Thank for your answer... I'd like to try to install Magisk instead of SuperSU. In several places is written that this should be right. I'll try....
unvisigoth said:
Thank for your answer... I'd like to try to install Magisk instead of SuperSU. In several places is written that this should be right. I'll try....
Click to expand...
Click to collapse
The method is also working fine with Magisk. Let me know if you need help
zxz0O0 said:
The method is also working fine with Magisk. Let me know if you need help
Click to expand...
Click to collapse
Finally done with a couple of hours of panic. This is the story if can be useful to someone...
Unlock bootloader....done TWRP install... done. Copy magisk (apk and zip) on phone than install apk without opening it. Reboot to recovery wipe all, factory reset. Trying to boot.....BOOTLOOP But I don't have installed Magisk zip. Only apk without opening it.
Nothing to do. Bootloop and then erecovery. I try to restore the backups previously done with TWRP. I restore boot and system partition. All wipes ...no luck. I don't know what has happened. While downloading full firmware to try to reinstall it I try to install magisk.zip. Install via TWRP. All wipes and then magically (it's such a case ) phone boots. Powered off and on several times no problem. Root (verified with root checker) ok.
I habe b100 release but I don't think to update to b130. I wait for Oreo...
The only two things that I can say are these: first TWRP even after flashing magisk gave an error (unable to mount system). Two while installing magisk it seems that magisk itself has patched something.
If someone has an explanation is welcome...
unvisigoth said:
Finally done with a couple of hours of panic. This is the story if can be useful to someone...
Unlock bootloader....done TWRP install... done. Copy magisk (apk and zip) on phone than install apk without opening it. Reboot to recovery wipe all, factory reset. Trying to boot.....BOOTLOOP But I don't have installed Magisk zip. Only apk without opening it.
Nothing to do. Bootloop and then erecovery. I try to restore the backups previously done with TWRP. I restore boot and system partition. All wipes ...no luck. I don't know what has happened. While downloading full firmware to try to reinstall it I try to install magisk.zip. Install via TWRP. All wipes and then magically (it's such a case ) phone boots. Powered off and on several times no problem. Root (verified with root checker) ok.
I habe b100 release but I don't think to update to b130. I wait for Oreo...
The only two things that I can say are these: first TWRP even after flashing magisk gave an error (unable to mount system). Two while installing magisk it seems that magisk itself has patched something.
If someone has an explanation is welcome...
Click to expand...
Click to collapse
So do you have some step-by-step instructions for someone who wants to unlock and root the phone with magisk?
shiboby said:
So do you have some step-by-step instructions for someone who wants to unlock and root the phone with magisk?
Click to expand...
Click to collapse
Here what I have done:
Unlock bootloader
install adb drivers (find something that is right for your PC. For example minimal ADB found on XDA weren't suitable for me. Google adb drivers...). Open a command windows (shift+right click). If typing "adb devices" your phone is found that's ok
Enable usb debugging and oem unlock (or in other words disable FRP, factory reset protection)
Put the phone in fastboot mode ("adb reboot bootloader"). If all ok typing "fastboot devices" your phone is found
Type "fastboot oem unlock xxxxxxxx" (xxxxxxxx is the code provided by Huawey)
Bootloader unlocked
Flash TWRP
Download TWRP recovery for Honor 9 (link found on other thread on this forum)
Put the phone in fastboot mode
Type "fastboot flash recovery xxxxx.img" (where xxxx.img is the recovery downloaded)
Reboot phone directly in Recovery to avoid erecovery overwrite TWRP. Booting on TWRP let TWRP patch to avoid erecovery booting
Now here I've had some issues as said (read previous post). My tip is the following:
after rebooting in TWRP make all wipes then reboot again in TWRP
Install Magisk.zip (for me download here https://geekaxe.com/root-honor-9-twrp-bootloader-unlocking/)
Reboot recovery
All wipes
Reboot to system
If it's all OK you can install magisk.apk and you are rooted
I suggest after flashing TWRP to make backup of all partitions on external SD (for some reasons, maybe encryption, backup on internal storage gives error). Again I suggest to copy all files that you need (i.e. magisk files) on external sd before starting all.
Pay attention that if you update firmware after this procedure I think that you must repeat all. For me I remain on original firmware found on phone (B100). B130 seems to have some bugs, B120 doesn't seem improve much. Moreover all releases are 7.0 based. I wait for Oreo, hopefully in some custom rom!
To add to this, a bootloop or two might be normal. Let it sit for a few minutes before considering re-flashing everything.
Thanks for your guide!
Zuzler said:
To add to this, a bootloop or two might be normal. Let it sit for a few minutes before considering re-flashing everything.
Thanks for your guide!
Click to expand...
Click to collapse
You're right. But after 20 minutes of bootlops I've chosen another way....:laugh::laugh:
unvisigoth said:
You're right. But after 20 minutes of bootlops I've chosen another way....:laugh::laugh:
Click to expand...
Click to collapse
So is it fixed?
Sent from my Honor 8 Pro using XDA Labs
adriansticoid said:
So is it fixed?
Sent from my Honor 8 Pro using XDA Labs
Click to expand...
Click to collapse
Yes sure. As said previously installation of magisk.zip fixed the bootloop problem. I think (but I could be wrong) that installation of TWRP corrupted the boot partition and magisk fixed it. But it's only an hypothesis...
unvisigoth said:
Yes sure. As said previously installation of magisk.zip fixed the bootloop problem. I think (but I could be wrong) that installation of TWRP corrupted the boot partition and magisk fixed it. But it's only an hypothesis...
Click to expand...
Click to collapse
Observe and be careful man.
Sent from my Honor 8 Pro using XDA Labs
unvisigoth said:
Yes sure. As said previously installation of magisk.zip fixed the bootloop problem. I think (but I could be wrong) that installation of TWRP corrupted the boot partition and magisk fixed it. But it's only an hypothesis...
Click to expand...
Click to collapse
Which TWRP version did you use?
I had a similar problem after formatting all data with the OpenKirin TWRP 3.1.1 Perhaps its an issue with this TWRP release?
I was able to recover in similar circumstances by flashing a stock boot.img over fastboot. Based on this, it's looking like Magisk is really the way to go for rooting atm. Making sure to pull my twrp backup with adb this time though.
If I'm lucky enough to install magisk and not get a bootloop the safetynet always fails. Anyone got a valid method of actually getting magisk working fully?
Hi,
I'm a happy new owner of the redmi note 4 and I've already unlocked the bootloader.
I would like to use google camera, and eventually adblock.
I've seen there are various way to
- install bootloaders (and it seems there are also various boatloaders)
- root the phone
- enable camera2 api, with and without root
- ...
Actually I like to keep the stock rom and the phone as vanilla as possible, as I've read there are redundant issue with custom rom. I also do like the idea of being able to update the phone "normally", which seems to be what you call OTA update . Also, I've seen that some app may not work if some verification fails ?
So basically the question could you explain me a bit the broad picture and what would you recommend ?
Thank's
PS : sorry I'm not super acurate, I rooted my LG G2 years ago and things seems to have evolved a lot since then.
jbonlinea said:
Hi,
I'm a happy new owner of the redmi note 4 and I've already unlocked the bootloader.
I would like to use google camera, and eventually adblock.
I've seen there are various way to
- install bootloaders (and it seems there are also various boatloaders)
- root the phone
- enable camera2 api, with and without root
- ...
Actually I like to keep the stock rom and the phone as vanilla as possible, as I've read there are redundant issue with custom rom. I also do like the idea of being able to update the phone "normally", which seems to be what you call OTA update . Also, I've seen that some app may not work if some verification fails ?
So basically the question could you explain me a bit the broad picture and what would you recommend ?
Thank's
PS : sorry I'm not super acurate, I rooted my LG G2 years ago and things seems to have evolved a lot since then.
Click to expand...
Click to collapse
So, you want root and GCam working on your MIUI without breaking OTA updates, is that right?
• Unlock bootloader, flash RedWolf recovery then through Redwolf recovery flash LazyFlasher.
• In Redwolf enable OTA survival.
• Flash Magisk through recovery for root.
• For GCam to work, you need to enable Camera2API in your build.prop. This can be done through a simple Magisk module too. But I must warn you enabling Camera2API on MIUI might break some functionalities of your MIUI stock camera app.
I am using pixel experience 8.1 oreo rom in my redmi notr 4.and i have also install google canera mod.mgcmod5.i have done all the settings but ehen i am trying to take puctures its force closing and lagging..need solution..
ArK96 said:
So, you want root and GCam working on your MIUI without breaking OTA updates, is that right?
• Unlock bootloader, flash RedWolf recovery then through Redwolf recovery flash LazyFlasher.
• In Redwolf enable OTA survival.
• Flash Magisk through recovery for root.
• For GCam to work, you need to enable Camera2API in your build.prop. This can be done through a simple Magisk module too. But I must warn you enabling Camera2API on MIUI might break some functionalities of your MIUI stock camera app.
Click to expand...
Click to collapse
After every OTA update do I need to re-flash everything?
ÀnkanKoley said:
After every OTA update do I need to re-flash everything?
Click to expand...
Click to collapse
If RedWolf succeeds OTA survival, then there is no need. But after OTA if RedWolf is replaced by stock recovery, then yes you'll have to flash everything once again. Refer RedWolf thread for more details on OTA survival.
ArK96 said:
So, you want root and GCam working on your MIUI without breaking OTA updates, is that right?
• Unlock bootloader, flash RedWolf recovery then through Redwolf recovery flash LazyFlasher.
• In Redwolf enable OTA survival.
• Flash Magisk through recovery for root.
• For GCam to work, you need to enable Camera2API in your build.prop. This can be done through a simple Magisk module too. But I must warn you enabling Camera2API on MIUI might break some functionalities of your MIUI stock camera app.
Click to expand...
Click to collapse
Sounds right and great, thank's !
Two question.
- I've read somewhere that some custom recovery and/or root may cause some app to fail, notably banking app.
Well I used to use such app on my rooted G2 , but will it remain posible after folowing the process you suggest above ?
about redwolf, there is quite a lot of explainations in theses two links 1 and 2, however I can figure out how to install redwolf ?! what am I suppose to do with the .iso image available for download ? isn't there a step by step install guide somewhere ?
Thank's
jbonlinea said:
Sounds right and great, thank's !
Two question.
- I've read somewhere that some custom recovery and/or root may cause some app to fail, notably banking app.
Well I used to use such app on my rooted G2 , but will it remain posible after folowing the process you suggest above ?
about redwolf, there is quite a lot of explainations in theses two links 1 and 2, however I can figure out how to install redwolf ?! what am I suppose to do with the .iso image available for download ? isn't there a step by step install guide somewhere ?
Thank's
Click to expand...
Click to collapse
Use Magisk for root and once Magisk is installed enable Magisk hide for the banking app, this will hide root from that particular app.
Installing a custom recovery like redwolf :
1. Unlock your phone's bootloader.
2. Download the recovery image file, rename it to "recovery.img" and place in a folder on your computer. Make sure you have working ADB and fastboot drivers installed on this computer.
3. Connect your phone in fastboot mode (Volume Down + Power button)
4. Open command prompt in the folder containing the downloaded recovery. (Shift + Mouse right click)
5. Type the below command into the command prompt
fastboot flash recovery recovery.img
fastboot boot recovery.img
Once inside recovery flash ROM, Magisk, if ROM is MiUI flash lazyflasher too, or phone won't boot. If custom ROM ignore lazyflasher and flash GApps instead.
If recovery installation instructions confuse you there are infinite number of YouTube videos that will help you.
ArK96 said:
So, you want root and GCam working on your MIUI without breaking OTA updates, is that right?
• Unlock bootloader, flash RedWolf recovery then through Redwolf recovery flash LazyFlasher.
• In Redwolf enable OTA survival.
• Flash Magisk through recovery for root.
• For GCam to work, you need to enable Camera2API in your build.prop. This can be done through a simple Magisk module too. But I must warn you enabling Camera2API on MIUI might break some functionalities of your MIUI stock camera app.
Click to expand...
Click to collapse
What would broke on miui camera?
amnher said:
What would broke on miui camera?
Click to expand...
Click to collapse
The HDR mode.
ArK96 said:
Use Magisk for root and once Magisk is installed enable Magisk hide for the banking app, this will hide root from that particular app.
Installing a custom recovery like redwolf :
1. Unlock your phone's bootloader.
2. Download the recovery image file, rename it to "recovery.img" and place in a folder on your computer. Make sure you have working ADB and fastboot drivers installed on this computer.
3. Connect your phone in fastboot mode (Volume Down + Power button)
4. Open command prompt in the folder containing the downloaded recovery. (Shift + Mouse right click)
5. Type the below command into the command prompt
fastboot flash recovery recovery.img
fastboot boot recovery.img
Once inside recovery flash ROM, Magisk, if ROM is MiUI flash lazyflasher too, or phone won't boot. If custom ROM ignore lazyflasher and flash GApps instead.
If recovery installation instructions confuse you there are infinite number of YouTube videos that will help you.
Click to expand...
Click to collapse
Thank's again , that's awesome!
Maybe a few more question
FIRST
at step 2) how do I make sure I have a working ADB and Fastboot drivers ?
As far as I understand, fastboot drivers should already be installed ; however I suspect ADB not to be installed.
Indeed, I've already unlocked the bootloader with this tutorial, and I can confirm the phone is unlocked from settings > more settings > developper options > Mi locking status.
So basically I've already installed MiUSBDrivers and ran miflashunlock. There are fastboot.exe, fastboot_unlock.exe and AdbWinApi.dll files in the miflash_unlock folder I downloaded and used to unlock, but I haven't used any of these later 3 files.
I have found this post to install ADB
SECOND
at step 4), the best would be to place the recovery image downladed from here into the folder containing ADB downloaded just above right ?
Then, go on with step 5)
THIRD
If everything went well, my phone is supposed to reboot in redwolf recovery, ok.
but whart do you mean by "Once inside recovery flash ROM" ?
Why am I suposed to flash a rom ?
To my understanding, I already have a rom, miui, and do not want to change for the moment.
Should I download the "Full Rom" from here, or the "Redmi Note 4 Qualcomm Latest Global Stable Version Fastboot File" rom from here ? If so, what souhld I do with the rom; where sould I place it, on the computer, on the phone ?
Or do I need to flash ROM only if I want to change/upgrade my rom ?
FOURTH
To flash Magisk and Lazyflasher.
I understood that redwolf recovery comes with Magisk, so I assume I'll only have to go to "install" tab of redwolf, and I'll find the Magisk file to flash.
Ok what about Lazyflasher ? is it also provided with redwolf ?
Or should I download it ? and if so where should I place the file ?
FIFTH (and last)
I assume once installed from recovery, Magisk will show himself as an app/icon on the "desktop", and I'll be able to selectively enable Magisk hide for the banking app.
Thank's again for your help.
Sorry if I have too many questions, I'm a little rusted, and prefer having a comprehensive picture of the porcess before jumping into it, and avoid one more post entitled helpppp pleeeeeese I bricked my phone
jbonlinea said:
Thank's again , that's awesome!
Maybe a few more question
FIRST
at step 2) how do I make sure I have a working ADB and Fastboot drivers ?
As far as I understand, fastboot drivers should already be installed ; however I suspect ADB not to be installed.
Indeed, I've already unlocked the bootloader with this tutorial, and I can confirm the phone is unlocked from settings > more settings > developper options > Mi locking status.
So basically I've already installed MiUSBDrivers and ran miflashunlock. There are fastboot.exe, fastboot_unlock.exe and AdbWinApi.dll files in the miflash_unlock folder I downloaded and used to unlock, but I haven't used any of these later 3 files.
I have found this post to install ADB
SECOND
at step 4), the best would be to place the recovery image downladed from here into the folder containing ADB downloaded just above right ?
Then, go on with step 5)
THIRD
If everything went well, my phone is supposed to reboot in redwolf recovery, ok.
but whart do you mean by "Once inside recovery flash ROM" ?
Why am I suposed to flash a rom ?
To my understanding, I already have a rom, miui, and do not want to change for the moment.
Should I download the "Full Rom" from here, or the "Redmi Note 4 Qualcomm Latest Global Stable Version Fastboot File" rom from here ? If so, what souhld I do with the rom; where sould I place it, on the computer, on the phone ?
Or do I need to flash ROM only if I want to change/upgrade my rom ?
FOURTH
To flash Magisk and Lazyflasher.
I understood that redwolf recovery comes with Magisk, so I assume I'll only have to go to "install" tab of redwolf, and I'll find the Magisk file to flash.
Ok what about Lazyflasher ? is it also provided with redwolf ?
Or should I download it ? and if so where should I place the file ?
FIFTH (and last)
I assume once installed from recovery, Magisk will show himself as an app/icon on the "desktop", and I'll be able to selectively enable Magisk hide for the banking app.
Thank's again for your help.
Sorry if I have too many questions, I'm a little rusted, and prefer having a comprehensive picture of the porcess before jumping into it, and avoid one more post entitled helpppp pleeeeeese I bricked my phone pen
Click to expand...
Click to collapse
ADB/Fastboot Drivers
Looks like you don't have ADB/Fastboot installed system wide. Although it is completely fine to use adb/fastboot in a folder, installing it system wide is much more convenient because you can open a command window in any folder and execute ADB/Fastboot commands. [URL="https://forum.xda-developers.com/showthread.php?t=2588979”]Here's the link[/URL] to download the system wide installer. Install it and REBOOT your PC.
Flashing RedWolf
Once drivers are installed and PC rebooted, connect phone in Fastboot mode and follow my previous instructions. Also now you can open command prompt in any folder and execute the commands since ADB/Fastboot is installed system wide.
Flashing ROM
Sorry if I confused you there in the previous post. If you wish to stick with your current MIUI ROM then you don't need to flash any ROM file.
Flashing Lazyflasher
You MUST flash lazyflasher since you want to stay with MIUI. If you install a custom recovery on MIUI without flashing lazyflasher, the phone will not boot and will be stuck at the MI logo. I've attached the file.
Flashing Magisk
Flash Magisk after lazyflasher. You may download the latest package from Magisk thread or use RedWolf's built in Magisk package as you said and update it later through the Magisk manager app. And yes, you can select which apps can be Magisk hidden.
ArK96 said:
ADB/Fastboot Drivers
Looks like you don't have ADB/Fastboot installed system wide. Although it is completely fine to use adb/fastboot in a folder, installing it system wide is much more convenient because you can open a command window in any folder and execute ADB/Fastboot commands. [URL="https://forum.xda-developers.com/showthread.php?t=2588979”]Here's the link[/URL] to download the system wide installer. Install it and REBOOT your PC.
Flashing RedWolf
Once drivers are installed and PC rebooted, connect phone in Fastboot mode and follow my previous instructions. Also now you can open command prompt in any folder and execute the commands since ADB/Fastboot is installed system wide.
Flashing ROM
Sorry if I confused you there in the previous post. If you wish to stick with your current MIUI ROM then you don't need to flash any ROM file.
Flashing Lazyflasher
You MUST flash lazyflasher since you want to stay with MIUI. If you install a custom recovery on MIUI without flashing lazyflasher, the phone will not boot and will be stuck at the MI logo. I've attached the file.
Flashing Magisk
Flash Magisk after lazyflasher. You may download the latest package from Magisk thread or use RedWolf's built in Magisk package as you said and update it later through the Magisk manager app. And yes, you can select which apps can be Magisk hidden.
Click to expand...
Click to collapse
Awesome !
Great to know that I should fisrt flash lazyflasher and then magisk.
Stupid, probably last question
Should I do everything up to and incliding flashing lazyflsher, rebot normally, and then reboot again in redwolf and flash magisk ?
of is this extra zealous ?
Thanks
jbonlinea said:
Awesome !
Great to know that I should fisrt flash lazyflasher and then magisk.
Stupid, probably last question
Should I do everything up to and incliding flashing lazyflsher, rebot normally, and then reboot again in redwolf and flash magisk ?
of is this extra zealous ?
Thanks
Click to expand...
Click to collapse
While it can all be flashed at one go, I suggest you to flash LF and once boot your device successfully and reboot to redwolf and flash Magisk afterwards.
ArK96 said:
While it can all be flashed at one go, I suggest you to flash LF and once boot your device successfully and reboot to redwolf and flash Magisk afterwards.
Click to expand...
Click to collapse
Thank you very much !
jbonlinea said:
Thank you very much !
Click to expand...
Click to collapse
No problem.
ArK96 said:
No problem.
Click to expand...
Click to collapse
hum, :silly:
the link you sent for adb do not work
jbonlinea said:
hum, :silly:
the link you sent for adb do not work
Click to expand...
Click to collapse
Here,
https://www.dropbox.com/s/mcxw0yy3jvydupd/adb-setup-1.4.3.exe?dl=0
ArK96 said:
Here,
https://www.dropbox.com/s/mcxw0yy3jvydupd/adb-setup-1.4.3.exe?dl=0
Click to expand...
Click to collapse
Excellent !
so
- I did installed redwolf recovery - changed settings as advised here
- flashed lazyflasher
- reboot -> wokrs I'm back on miui
- reboot in redwolf and flashed magisk
- reboot into android, installed rootchek, I'm rooted
- hide magisk from magisk manager for my apps --> working
Everything works
Further questions :
- Am I suppose to clean cache at some stage ? I can still do it now ?
- Is there some recomended module for magisk ? (not sure what they are for)
- as for everything else, I've seen many options to enable camera2api. Which one would you recomend ? is "persist.camera.HAL3.enabled=1" the only needed change or this treat rises something this
- is there a recomended version/release of google camera to use with miui9 global, latest update (not developper) (I've seen various reported issues depending on version/release)
- any other must/nice/interesting hacks to fully enjoy this phone ?
- any security recomendation ? (re-locking the bootloader ? instally some utilities... ?)
thanks
after that, I'll be done
jbonlinea said:
Excellent !
so
- I did installed redwolf recovery - changed settings as advised here
- flashed lazyflasher
- reboot -> wokrs I'm back on miui
- reboot in redwolf and flashed magisk
- reboot into android, installed rootchek, I'm rooted
- hide magisk from magisk manager for my apps --> working
Everything works
Further questions :
- Am I suppose to clean cache at some stage ? I can still do it now ?
- Is there some recomended module for magisk ? (not sure what they are for)
- as for everything else, I've seen many options to enable camera2api. Which one would you recomend ? is "persist.camera.HAL3.enabled=1" the only needed change or this treat rises something this
- is there a recomended version/release of google camera to use with miui9 global, latest update (not developper) (I've seen various reported issues depending on version/release)
- any other must/nice/interesting hacks to fully enjoy this phone ?
- any security recomendation ? (re-locking the bootloader ? instally some utilities... ?)
thanks
after that, I'll be done
Click to expand...
Click to collapse
Clean cache not required.
Magisk modules are MODs for your system but they are done without tampering your system. (Systemless MODs).
Try Dolby atmos ZTE Axon 7 audio MOD module, YouTube vanced module (100% Adfree, background play)..etc
Use Arnova's GCam.
Never ever relock bootloader with a custom recovery or custom ROM. Else irreversible brick.
I've repeated too much stuff that has been posted in the forum already, if you have any further doubts search the forum or use Google.
Flash through redwolf the attached file to enable camera2api. If you want to uninstall it later go to magisk manager and delete it.
Cheers.
ArK96 said:
Clean cache not required.
Magisk modules are MODs for your system but they are done without tampering your system. (Systemless MODs).
Try Dolby atmos ZTE Axon 7 audio MOD module, YouTube vanced module (100% Adfree, background play)..etc
Use Arnova's GCam.
Never ever relock bootloader with a custom recovery or custom ROM. Else irreversible brick.
I've repeated too much stuff that has been posted in the forum already, if you have any further doubts search the forum or use Google.
Flash through redwolf the attached file to enable camera2api. If you want to uninstall it later go to magisk manager and delete it.
Cheers.
Click to expand...
Click to collapse
Hi dude
I'm almost done but back to square 0, with blinking black screen at boot !
No crisis, I can still go to redwolf recovery, as well as fastboot.
How it happend ?
In magisk manager (on miui) I checked what modules were available in the download panel, and tried "Google Pixel 2 Experience" or something similar.
On reboot, the mi logo is displayed, then I have a black screen blinking on and off, without mi logo, just black, on and off
I thus wanted to unistal the mod with magisk module uninstaller, but the install fails and return that "magisk is not installed" and "magisk is required for this mod"
So I obviously couldn't try to uninstall the supposed failing module
I thus rebooted in redwold and installed magisk from redwolf (the included release), things went well
However, I still cant install magisk module uninstaller, getting the same error as above.
I took my chance and try to re-install magisk from the zip filed I downloaded, the install process was successfull, but I still can't install magisk mod uninstaller, and the black screen issue persist.
Lastly, I took my chance and try to re-install lazy flasher, the install process was successfull, but the black-screen issue persist.
To be honest, I'm a bit sctuck now.
What may be the right procedure to solve this problem ?
Am I screwed and do I have to reflash a whole rom ?
If so Should I do it from redwolf, and how ?
Or should I do it from the pc with fastboot, and how ?
Thanks for your directions
ps: i was interested by pixel 2 experience module as at it was written that it was compatible with mido and provides camera2api, which might have been a nice combo.
ps 2 : I also did installed dolby as you suggested, it worked but the demo crashed to app
ps 3 : I also did installed youtube vaccant, but I couldn't see any new app and my original youtube still had add and couldn't play in the back... not sure it reveals something on the effectiveness of magisk...
I have global Honor 9, updated to 8.0.0.379(C432), unlocked and rooted.
I read that Huawei rolled out an update which broke Magisk, does anyone know if the latest update is safe?
How can I tell if an update is safe to use?
I'm using it with the new 9.0.1 rom and it works just fine, the only problem is that it cannot exist on the phone at the same time with a TWRP recovery
mtvento said:
I'm using it with the new 9.0.1 rom and it works just fine, the only problem is that it cannot exist on the phone at the same time with a TWRP recovery
Click to expand...
Click to collapse
as opposed to version 8.0.0.379?
I currently have magisk and TWRP with no problem, is this problem you describe is new to the latest version?
Do you have a different custom ROM?
I have the latest official ROM, and yes it is a new problem with EMUI9, the boot.img partition doesn't exist any more and magisk has to be installed on the recovery_ramdisk.img
mtvento said:
I have the latest official ROM, and yes it is a new problem with EMUI9, the boot.img partition doesn't exist any more and magisk has to be installed on the recovery_ramdisk.img
Click to expand...
Click to collapse
So on EMUI9 there's no option of Root+Custom recovery?
So the options are either root or custom recovery?
Did I understand correctly?
Thank you
Yes, correct until new findings lead to better solution, and keep in mind that you have to boot to recovery each time to keep root working...
mtvento said:
Yes, correct until new findings lead to better solution, and keep in mind that you have to boot to recovery each time to keep root working...
Click to expand...
Click to collapse
That sucks big time.
What do you mean by "have to boot to recovery each time"? every time I restart the phone or turn it off and back on I must go through recovery?
I think I'll avoid EMUI9 and stick with EMUI8.
For some reason there are not much custom ROMs or honor 9
That is the last time I buy a non root friendly phone like Huawei/Xiaomi
Once you have magisk set up you can just get it to flash the boot image from within the manager you can boot as normal then
buchman said:
Once you have magisk set up you can just get it to flash the boot image from within the manager you can boot as normal then
Click to expand...
Click to collapse
I don't really know what that means.
Is it a one time thing?
how is it done exactly?
Clonimus said:
I don't really know what that means.
Is it a one time thing?
how is it done exactly?
Click to expand...
Click to collapse
From within magisk manager click on install magisk and the select the direct install method. It patches the right bit then and you can boot without going through recovery
buchman said:
From within magisk manager click on install magisk and the select the direct install method. It patches the right bit then and you can boot without going through recovery
Click to expand...
Click to collapse
When I do that it gives me 2 options, one is download a zip file (and then I need to install using TWRP, right?)
The other option is patch a boot image, and it lets me look for one. Is this option to patch a downloaded boot image and then I need to flash it? what do I do with this option?
I want to access /data/system/users//settings_ssaid.xml to know what my game unique id is.
But after some research i learned that i have to root to able to get there but i have almost zero knowledge about it.
Are there any guide to root Redmi Note 10 from the scratch? Thanks.
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm on official global ROM 12.5.3.0 RKGMIXM
And i turned on OEM Unlocking in developer mode yesterday (Which is confuse me a little a guide said i have to wait for 7 days for this but mine is nothing it's just switched to on)
OEM Unlocking is only one of the steps, but it does not unlock the bootloader. File a request with Xiaomi.
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
inn0ichi said:
...
i recommend only booting to twrp, not flashing it
...
Click to expand...
Click to collapse
Why do you recommend to only booting to TWRP instead of flashing it?
Pasarireng said:
Why do you recommend to only booting to TWRP instead of flashing it?
Click to expand...
Click to collapse
because the twrp developer instruction is to booting , not flashing
alonsoj636 said:
because the twrp developer instruction is to booting , not flashing
Click to expand...
Click to collapse
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Risk of bootloop
Pasarireng said:
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Click to expand...
Click to collapse
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Y
alonsoj636 said:
Risk of bootloop
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Click to expand...
Click to collapse
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Pasarireng said:
Y
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Click to expand...
Click to collapse
Yes , is the correct way
inn0ichi said:
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
Click to expand...
Click to collapse
Please confirm these;
*So we can:
Use TWRP only temporarily, only to root the phone (by flashing Magisk v23),
and then,
back to using the stock recovery on our RN10 afterward,
even if the RN10 is already rooted?
**If the answer for my question above is yes, then (in RN10 condition of Unlocked Boot Loader, Rooted, Stock MIUI & Stock Recovery) ;
Would we still get official OTA Update from Xiaomi (and can download and install the update- as how it's like before rooting the phone)?
Thank you in advance
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
StaryMuz said:
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
Click to expand...
Click to collapse
Thanks again, (and maybe I will try your suggestion later).. but (sorry)... your reply doesn't answer my questions.
(I think my questions are very clear and probably very easy to be answered by someone who has experience/knowledge about it (like you?).. no?)
Forgive my nooby questions.
But I really want to know as much as I can (especially about the answer for some questions I have inside my head about the matter, like I asked above),.. before executing doing something about my phone.
oops... I'm sorry for double send
In the past I rooted Miui and then continued to get OTA updates. However, this cannot be confirmed for all versions of Miui. Each new update changes the phone software and so what worked before may not work today.
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
First of all, I would like to point out that Magisk (root) is a security risk. Without understanding the issues, the phone is more easily exploitable.
To install, just download the magisk file with the ZIP extension. In recovery, select the install option and select this file. Once installed, exit recovery and boot the system. Once the system boots, use magisk and complete the installation it requests.
Lolitary said:
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
Click to expand...
Click to collapse
the answer above is right ... but i would suggest to flash Orange Fox zip and then Magisk zip... to avoid problems
isn't there decrypt.zip for RN10?
How to decrypt this phone?
I usually did that along with rooting with my android phones before this.
Edit:
Update:
It's ok now I understand how, after watching this video.
The TWRP for the HD1910 works perfectly on the HD1925. Decryption works too. Install TWRP by using the installer.
Exact the img from the installer zip.
Boot to fastboot
Open a CMD within the extracted TWRP installer folder and type in
"fastboot boot recovery.img"
Once TWRP boots, then install the TWRP installer zip file.
I flashed magisk and it flashed with no issues. I used the latest version here.
Download TWRP for hotdog
Download TWRP Open Recovery for hotdog
dl.twrp.me
NOTE: I did it on the latest version, 11.0.1.18 So I'm not sure if it works on any older versions but I would assume so.
Yep, been out a while now. Works perfectly! However I highly highly recommend not using the twrp installer zip on our phones nor installing it by doing "fastboot flash recovery name_of_twrp.img"
Just download the latest .img and do "fastboot boot name_of_twrp.img" whenever you need to go into twrp recovery. Or you're just asking for trouble with OTA updates definitely no longer working (until you restore the stock recovery that matches the exact version of OOS that you are running) and a good possibility of getting a Qualcomm Crash-dump and losing or breaking all kinds of stuff.
starcms said:
Yep, been out a while now. Works perfectly! However I highly highly recommend not using the twrp installer zip on our phones nor installing it by doing "fastboot flash recovery name_of_twrp.img"
Just download the latest .img and do "fastboot boot name_of_twrp.img" whenever you need to go into twrp recovery. Or you're just asking for trouble with OTA updates definitely no longer working (until you restore the stock recovery that matches the exact version of OOS that you are running) and a good possibility of getting a Qualcomm Crash-dump and losing or breaking all kinds of stuff.
Click to expand...
Click to collapse
I already know about all that. I've had this phone over a year, so I'm familiar with the hidden "secrets".
starcms said:
Yep, been out a while now. Works perfectly! However I highly highly recommend not using the twrp installer zip on our phones nor installing it by doing "fastboot flash recovery name_of_twrp.img"
Just download the latest .img and do "fastboot boot name_of_twrp.img" whenever you need to go into twrp recovery. Or you're just asking for trouble with OTA updates definitely no longer working (until you restore the stock recovery that matches the exact version of OOS that you are running) and a good possibility of getting a Qualcomm Crash-dump and losing or breaking all kinds of stuff.
Click to expand...
Click to collapse
BTW, with unlocked bootloader OTA's are not available no matter what type of recovery you have installed. Unless you have reinstalled the reserve.img after unlocking the bootloader
AntiSocialSingh said:
@BobbyLynn I followed your tutorial to install the CrDroid recovery. Can you tell me how to flash TWRP? Bit of a noob for this phone.
Click to expand...
Click to collapse
Exact (Unzip) the zip folder. Within the extracted folder you'll see some other files. One of them is a recovery.img file. Open a command or PowerShell in the extracted folder. Reboot to fastboot.
Boot to fastboot and run this command
"fastboot boot recovery.img"
Once it boots into TWRP, then click on "install" and locate the TWRP installer zip and select it. It'll most likely be in the download folder. Just make sure you know where the TWRP installer zip is located before you even boot into TWRP
BobbyLynn said:
Exact (Unzip) the zip folder. Within the extracted folder you'll see some other files. One of them is an .img file (recovery). Open a command or PowerShell in the extracted folder. Reboot to fastboot.
Boot to fastboot and run this command
"fastboot boot recovery.img"
Once it boots into TWRP, then click on "install" and locate the TWRP installer zip and select it. It'll most likely be in the download folder. Just make sure you know where the TWRP installer zip is located before you even boot into TWRP
Click to expand...
Click to collapse
BTW download this TWRP from the link in my thread "twrp-installer-3.6.1_11-0-hotdog.zip"
AntiSocialSingh said:
@BobbyLynn Do i need to flash both a & b like i did in the case of crDroid?
Click to expand...
Click to collapse
Not at all. The installer will take care of all that once you boot into TWRP
AntiSocialSingh said:
@BobbyLynn Should I take a backup? Would it wipe my storage? or it would be as it is?
Click to expand...
Click to collapse
No it won't wipe data or anything else. But it's always good to have a backup just in case anything goes sour.
AntiSocialSingh said:
@BobbyLynn I am on the screen which says Install, Wipe, Backup, restore...... what should i do to install the zip file now?
Click to expand...
Click to collapse
Just click on "install" then located the installer zip file then select it and install it
AntiSocialSingh said:
I copied the .zip file on my phone but cannot navigate to it since all it shows is (Up A level), does not show the directories inside the storage
Click to expand...
Click to collapse
Select up a level then scroll down until you see a file called "storage" that'll take you to your storage. If it doesn't, the go back and click on "sdcard" But I'm almost certain it's in the storage folder
AntiSocialSingh said:
I think i need to flash it once via TWRP, i'll try it later, but thank you, it means that this TWRP works!
Click to expand...
Click to collapse
I just checked..... The "sdcard" folder is the one that takes you to the internal storage where the download folder is located. But as soon as you hit 'install" it should've taken you straight to the internal storage. If it didn't, then it sounds like it's still encrypted. If that's the case, then remove any screen locks on your phone before flashing TWRP
AntiSocialSingh said:
@BobbyLynn Let me try once again with the screen lock removed.
Click to expand...
Click to collapse
When I installed TWRP I didn't have a screen lock. But after installing TWRP I set a screen lock and TWRP decrypted just fine. So I'm guessing if you install TWRP while you have a screen lock it doesn't install properly so it can't decrypt. It appears that any screen locks must be removed before installing and after installing reapply a screen lock
AntiSocialSingh said:
@BobbyLynn It worked! So basically, I had to remove both fingerprint and pattern locks to get it to work. Thanks a ton!!
Click to expand...
Click to collapse
No problem
BobbyLynn said:
No problem
Click to expand...
Click to collapse
I'm kinda curious, why did you install TWRP? Are you fixing to "test drive" some custom ROM's or flash some mods? Or did you install TWRP just for the hell of it?
AntiSocialSingh said:
@BobbyLynn The latter yes, test driving some mods, and I am used to the interface of TWRP, not crDroid much, personal preference hahahaha....Thank you so much once again. you're a legend.
Click to expand...
Click to collapse
I'm more use to TWRP myself. I started using TWRP about 10 years ago, it was and still is the best recovery out there. I just happened to install crDroid the other day just to test something. And that test turned out to be a great discovery of a simple way to root the stock firmware. Since I have a extra McLaren, I do quite a bit of testing and modding and experimental stuff. I'm currently working on installing the global firmware (unbranding) it. No luck yet, but I might be getting close.
AntiSocialSingh said:
@BobbyLynn I will be the first one to follow your tutorial if you manage to flash the Global ROM on it sir. I promise haha!
Click to expand...
Click to collapse
You can bet your ass that if I pull off that trick it'll get LOT'S of comments from people thanking me lol. We've been wanting to install the global firmware on this phone, but nobody can figure out how to mod the ROM to make it flash on this phone. There's some very smart developers that own this phone, so I'm surprised that none of them have figured it out yet. So I've been tinkering around with trying to install it. It's looking like I'm going to have to make some modifications to the global ROM and/or the phone too to make the MSM tool see the phone as a comparable device
BobbyLynn said:
BTW, with unlocked bootloader OTA's are not available no matter what type of recovery you have installed. Unless you have reinstalled the reserve.img after unlocking the bootloader
Click to expand...
Click to collapse
Well, yeah, restoring reserve.img is a prerequisite to get OTAs with the bootloader unlocked, but it only has to be done once. After that, for each ota, just restore the boot image to stock (uninstall magisk) and you're good to go
starcms said:
Well, yeah, restoring reserve.img is a prerequisite to get OTAs with the bootloader unlocked, but it only has to be done once. After that, for each ota, just restore the boot image to stock (uninstall magisk) and you're good to go
Click to expand...
Click to collapse
I wanted to do OTA how should I restore my reserve.img?