Hi
I rooted my OnePlus 6t on Android 10 using majisk and the sound does not work at all not even my headphones work
Also my wifi doesn't work it says turning wifi on then it just turns off
So I did a factory reset and neither one of these were fixed please help
Now trying to flash stock room
If you think that won't work or will make it worse tell me please
If there is an easier way also tell me
Related
Hello
i have problem with my phone, after I flash ROM (i try Viper and NightMare)
my sound isn't working, phone isn't able to make any sound from speaker
I also try to make call and my microphone isn't working, I didn't get any sound even if I
use my headphones, so i make search what else isn't working and I found that when i start
camera everything is fine but when i make switch to cam recorder phone will stop it (without any err message)
somebody fix that issue with changing sound effects - didn't work for me
I don't know where is problem, do you have any suggestions?
I have HTC amaze 4G x175e
hboot 1.92.0000, unlocked, s-on
there is custom RUU, also i flash kernel v29, before every ROM flash I make wipe-factory reset, all except sdcard,
nothing help, every advice how to fix that is really appreciated
thank you
Hi,
I flashed new ROM on my Lenovo P780, its EU rom LiFe v0.7.
Everything is working fine and stable, but one thing isnt,
I cant turn on Wifi or Bluetooth.
When I try to turn it ON, the turning on animation appears, but it keeps coming back as OFF. So I just cant turn it on.
I was trying switch the ROM back to stock rom, but this Wifi error is still there.
Does anyone know what to do with this ?
Thanks a lot.
unknown-dobi said:
Hi,
I flashed new ROM on my Lenovo P780, its EU rom LiFe v0.7.
Everything is working fine and stable, but one thing isnt,
I cant turn on Wifi or Bluetooth.
When I try to turn it ON, the turning on animation appears, but it keeps coming back as OFF. So I just cant turn it on.
I was trying switch the ROM back to stock rom, but this Wifi error is still there.
Does anyone know what to do with this ?
Thanks a lot.
Click to expand...
Click to collapse
Did you make a full backup of your stock ROM? If not, you are doomed because of the WiFi and Bluetooth MAC address or NVRAM data probably have been wiped, thus you cannot switch on WiFi and Bluetooth at all.
Probably you can fix it, but I don't know whether it works or not though.
http://www.gizbeat.com/2446/fix-nvram-err-0x10-and-random-mac-address/
First rule with Mediatek phones, always make a full backup of stock ROM before making any mods to your phone.
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Read the Thread
Felino41 said:
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Click to expand...
Click to collapse
Flash Final 3... this will work for you.
MaStErB_1984 said:
Flash Final 3... this will work for you.
Click to expand...
Click to collapse
First of all thank you for the tip, in the meantime I installed Android 7 beta to have a look at it. Is there any way to go back to Stock ROM on Android 6 so I can install CM13 Final Build 3? I have tried flashing Recovery and STOCK ROM via SP Flash but it won`t work. I click Download, connect the phone while pressing the Vol+ and it says Downloading, goes up to 100% but the red bar is still there, then nothing happens. Every Flash of Stock or CM Recovery I did before that worked just fine so I guess it has something to do with Android 7. If there is no way I guess I`ll stick with Android 7 for now but I´d rather switch to CM.
There is a way...it has to do with the Android...it changes the preloader and the boot partition. Take this file from deepflex: https://yadi.sk/d/40K4mWLauUddk and flash with sp-tools. Finally flash the TWRP-Recovery from Jonny with flashtools. At the end do a full wipe and install the cm13.1 (Final 3) and the opengaaps.
Got it to work, I used a slightly different approach but right now I am finally installing CM13 Final Build 3, lets see if it works out fine! Thanks again for your help :good::good:
so i think i ****ed up pretty BAD i flashed first a lineage OS android 6.0 and because of problems with stability i change it for omni rom android 5.1 and worked well, but the wifi doesnt work and hotspot(which i use alot cause i have a tablet and no wifi), so at the time i was thinking that was because a param file i flashed (eliminated the L in i8190L in power on), so i downloaded another a flashed that, somehow TWRP recovery (ver 2.8.0.0) doesnt start, and the download mode doesnt work, the phone works fine and does everything my data works fine and searches fine, only the usb hotspot works (which im using right now btw), so i dont know how to either recover the download mode to flash again the recovery or another option that doesnt require flashing my phone risking to brick the **** out of it. PLS HELP
Hi there
Since I updated my MI A3 to Android 11 the microphone sometimes doesn't record voices !
( I reset and flashed my phone so many times but didn't solve )
Upppppp
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Recently after owning a new car that is my first using Bluetooth handsfree option, I discovered this issue.
It seems the mic got somehow "stuck" to the car when I leave it, as the phone's normal mic then is okay. Just when trying to use the phone's handsfree mic in a call oder video calling in signal or hangouts it doesnt work. Even recording videos using the camera app is fine, but any handsfree option for any communication does not work.
Restarting the device or restarting bluetooth does not work. Somehow the phone recovers after sometime. When, why and how I do not know.
It definitely breaks down again once reconnected to the car.
with other bt devices have same problem?
Sadly I don't have any other bt device that is handsfree mic capable, I just own a speaker that is connected every now and then - it was my first idea to recover it by connecting to another bt device (the said speaker), but it does not work. Of course, the speaker is not connected using the same bt variant, the icon in the phone's settings is different.
mmmm... for this issue, the solution are: try delete all bt connection. if dont work try install latest software update. if dont work the definitive solution is wipe data and make a new clean installation. i suggest do this via miflash
wetito said:
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Click to expand...
Click to collapse
is there a guide to do a good factory reset without unlock the bootloader?
boot into recovery and wipe data