Related
Hello,
Here is a guide for anyone that wants to keep root with SafetyNet verified on Huawei P10 and P10+, also here you will find how to install/update P10 and P10+ firmware.
REQUIREMENTS
- Unlocked Bootloader(BEFORE&AFTER YOU INSTALL FIRMWARE)
- TWRP recovery for P10(AFTER INSTALLING FIRMWARE) : https://.xda-.com/p10/development/testers-twrp-t3585256
- Make a back up of system,products,vendor,boot,etc. in twrp(optional,but recommended)
Now,the steps :
1. Install your stock firmware(or update) : http://www.stechguide.com/?s=huawei+p10 (read the steps in there carefully and see if your build number matches the one on the site!)
STEP 1 IS NOT NEEDED IF YOU NEVER TRIED TO ROOT YOUR P10!
2. After you installed your desired firmware go ahead and unlock bootloader again(this will factory reset your device)and install TWRP recovery.
3. Download Magisk v12,Magisk Manager and uninstaller and flash Magisk v12 with TWRP and then install Magisk Manager.
Magisk v12: https://forum.xda-developers.com/attachment.php?attachmentid=4095052&d=1490916845
Magisk manager for v12: http://www.apkmirror.com/apk/topjoh...se/magisk-manager-4-3-3-android-apk-download/
UPDATED :
I found a way to install v13 on p10,p10 plus,not sure if p10 lite also :
Go in magisk manager(magisk v12) and check the "Keep force encryption" and "Keep dm-verity" boxes,and then press install/update (if this doesnt work),download a terminal emulator(https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en) and type this :
Code:
su
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
Thank you ! Finally I learned to debrand hoping viper4android will work with magisk.
juntulis said:
Thank you ! Finally I learned to debrand hoping viper4android will work with magisk.
Click to expand...
Click to collapse
Yeah, forgot to mention that you can debrand too with this. Np
Viper4android won't work because you need to enable core mode on Magisk(that means no mods will be loaded)
then how to make v4a to work?
wait for the stable v13 magisk
Hello,
Actually I have a P10 with build number : VTR-L09C530B122, could I follow the guide with the Huawei P10 B153 Nougat Update [Europe] ?
Thanks for the reply
christrodr said:
Hello,
Actually I have a P10 with build number : VTR-L09C530B122, could I follow the guide with the Huawei P10 B153 Nougat Update [Europe] ?
Thanks for the reply
Click to expand...
Click to collapse
That means to rebrand to C432, if you wish to do that you can.
MusicHeat said:
That means to rebrand to C432, if you wish to do that you can.
Click to expand...
Click to collapse
Thank you,
By rebranding, I suppose you mean to change the operator on the phone or I'm wrong ?
christrodr said:
Thank you,
By rebranding, I suppose you mean to change the operator on the phone or I'm wrong ?
Click to expand...
Click to collapse
Yes
MusicHeat said:
Yes
Click to expand...
Click to collapse
Is the C432 an unbranded one ?
MusicHeat said:
Yes
Click to expand...
Click to collapse
Let me know if you are going to rebrand
christrodr said:
Is the C432 an unbranded one ?
Click to expand...
Click to collapse
Either orange, either unbranded don't know for sure
MusicHeat said:
Either orange, either unbranded don't know for sure
Click to expand...
Click to collapse
So to be sure I have to do nothing...
Thank you.
christrodr said:
So to be sure I have to do nothing...
Thank you.
Click to expand...
Click to collapse
You can use another method to stay on the same brand.
MusicHeat said:
NEVER REBOOT YOUR PHONE WITH MAGISK HIDE ENABLED,IT WOULD BE IMPOSSIBLE TO UNLOCK YOUR DEVICE WITHOUT FORMATTING DATA THROUGH TWRP!!!
Click to expand...
Click to collapse
Can you explain why this does not work? (is only a P10 problem right?)
I gave up on TWRP/Magisk on my P10 Plus because of this
I never figured out why, but guessed it had to do with the encryption of the data partition
I was going to look at it again once TWRP could do a full backup (including /Data)
I'm currently on stock and it sucks... Did burn my fingers with FRP lock on a phone that couldn't boot to Android... And recovery2 (eRecovery) overwritten by flashing TWRP over it... Not feeling adventurous until TWRP is fully working ?
evalu8t0r said:
Can you explain why this does not work? (is only a P10 problem right?)
Click to expand...
Click to collapse
I don't have much to say but twrp(for VTR and VKY) are both in beta i believe and also, i have problems with data encryption too on twrp.
Can i download it ? where ?
evalu8t0r said:
Can you explain why this does not work? (is only a P10 problem right?)
I gave up on TWRP/Magisk on my P10 Plus because of this
I never figured out why, but guessed it had to do with the encryption of the data partition
I was going to look at it again once TWRP could do a full backup (including /Data)
I'm currently on stock and it sucks... Did burn my fingers with FRP lock on a phone that couldn't boot to Android... And recovery2 (eRecovery) overwritten by flashing TWRP over it... Not feeling adventurous until TWRP is fully working ?
Click to expand...
Click to collapse
im burnin right now with a p10 vtr-lo9 with bootloop and frp lock. only accesible with vol.down and usb while boot mthod. but stuck cause all flash or update commands stuck in command not allowed..
how you fix it?
Does this guide also work for the P10 Lite?
1987yeah said:
Does this guide also work for the P10 Lite?
Click to expand...
Click to collapse
Don't think so.
Hello,
Does anyone have a tutorial for update the Huawei Mate 10 pro when we are rooted and have an unlocked bootloader.
Thanks
Sorry for my bad english
hug42 said:
Hello,
Does anyone have a tutorial for update the Huawei Mate 10 pro when we are rooted and have an unlocked bootloader.
Thanks
Sorry for my bad english
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
lvbaal said:
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Click to expand...
Click to collapse
How does installing a rooting program help here?
That was not the question..
Updating
hug42 said:
Hello,
Does anyone have a tutorial for update the Huawei Mate 10 pro when we are rooted and have an unlocked bootloader.
Thanks
Sorry for my bad english
Click to expand...
Click to collapse
Haven't seen any tutorial on that but as far as I know once you have rooted and unlocked the bootloader you are not able to use the stock Huawei OTA update anymore, if I see one I'll let you know though.
tkalfaoglu said:
How does installing a rooting program help here?
That was not the question..
Click to expand...
Click to collapse
This thread is 6 months old.
Mankindtw has since removed the HWOTA used for updating and now only the Magisk installer exists.
For anyone wondering, use HuRUpdater to update through twrp.
Or restore stock recovery and stock ramdisk and you might be able to install OTA. If it should fail you can try the menu in System Update and Download Latest full, this should install fine as it doesn't check any partition for integrity before installing (will remove Magisk if you haven't)
Hello Every One
i have a Mate 10 ALP-L29, Build 8.0.0.103(652).
this phone is Bootloader Unlocked and Rooted! (for removing demo mode)
But FingerPrint not working.
This problem also existed before the bootloader was unloked.
sorry for my bad EN.
KICK-BOXING said:
Hello Every One
i have a Mate 10 ALP-L29, Build 8.0.0.103(652).
this phone is Bootloader Unlocked and Rooted! (for removing demo mode)
But FingerPrint not working.
This problem also existed before the bootloader was unloked.
sorry for my bad EN.
Click to expand...
Click to collapse
Maybe is a hardware problem...
Why rooted and unlocked? Demo mode can be enabled and disabled in settings.
How did u root? This could be the problem.
If the problem existed before rooting, it's most likely disabled in your kernel (if you can see the setting in Security). Most likely because it's a demo cust. I'd try rebranding to something else.
wooley4766 said:
Why rooted and unlocked? Demo mode can be enabled and disabled in settings.
How did u root? This could be the problem.
Click to expand...
Click to collapse
i root the device for removing Retail App and install custom Kernel or Rom.
Rooting can break function ai unless you have rooted with magisk also the custom rom/ kernel can cause problems with the fingerprint.what rom or kernel are used?
Like ante says rebrand to 636 region.
Be careful don't use noxloader version.
wooley4766 said:
Rooting can break function ai unless you have rooted with magisk also the custom rom/ kernel can cause problems with the fingerprint.what rom or kernel are used?
Like ante says rebrand to 636 region.
Be careful don't use noxloader version.
Click to expand...
Click to collapse
rom and kernel is stock
I do not intend to rebrand.
thank you for your replay.
i have the same problem any solytion for fingerprint and pattern
rida007 said:
i have the same problem any solytion for fingerprint and pattern
Click to expand...
Click to collapse
i can help you
send a pm to me
Has anyone on a Mate 10 Pro BLA-A09 been able to boot a Treble Custom Rom? How? I can't seem to boot any rom at all.
MuyKurioso said:
Has anyone on a Mate 10 Pro BLA-A09 been able to boot a Treble Custom Rom? How? I can't seem to boot any rom at all.
Click to expand...
Click to collapse
You followed all the instructions on the site? I am wondering as well, because I have the same version.
itsdan313 said:
You followed all the instructions on the site? I am wondering as well, because I have the same version.
Click to expand...
Click to collapse
Well, yeah. Can't boot anything but the V9 of Phhs Aosp ROM. Maybe it's due the lack of the original recovery, do you happen to have the stock recovery from our device? Will you share it? Thanks.
MuyKurioso said:
Well, yeah. Can't boot anything but the V9 of Phhs Aosp ROM. Maybe it's due the lack of the original recovery, do you happen to have the stock recovery from our device? Will you share it? Thanks.
Click to expand...
Click to collapse
I don't have my phone yet, but saw in another thread to try this.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
itsdan313 said:
I don't have my phone yet, but saw in another thread to try this.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Nope. Not messing with that again. Already bricked one Mate 10 Pro using that. So you don't have the Mate 10 Pro yet?
This system image is used for downgrading, testing, etc...
Download: https://www.androidfilehost.com/?fid=4349826312261680181 (Only for TicWatch Pro)
Got into bootloop after installing this / trying to fix "not able to update" any new IMG available or other BOOT, RECOVERY, VENDOR IMGs to that?
thanks
ANY chance you have or know where to get the ticwatch pro 4g stock firmware??
https://mega.nz/folder/cVVBRaxL#iZbWXMs8vabDW1szJz1hgg
https://mega.nz/folder/ch5QVC7K#q-_A80d0zf42tNm-kFe7cw
i found only this so far...
killeriq said:
https://mega.nz/folder/cVVBRaxL#iZbWXMs8vabDW1szJz1hgg
https://mega.nz/folder/ch5QVC7K#q-_A80d0zf42tNm-kFe7cw
i found only this so far...
Click to expand...
Click to collapse
Lifesaver IF I can use this on the 4G ??
killeriq said:
https://mega.nz/folder/cVVBRaxL#iZbWXMs8vabDW1szJz1hgg
https://mega.nz/folder/ch5QVC7K#q-_A80d0zf42tNm-kFe7cw
i found only this so far...
Click to expand...
Click to collapse
Is this just a stock firmware? So I can't and or shouldn't flash magisk or BusyBox? I got a nice error when I flashed that 4g us image and magisk and BusyBox.
Content removed