Did a reboot and now is stuck at optimizing app logo.. it goes over and over.
What to do? How do I reset it?
man i have same problem..(
guys help us plz)
Darkxy1983 said:
Did a reboot and now is stuck at optimizing app logo.. it goes over and over.
What to do? How do I reset it?
Click to expand...
Click to collapse
Quattres said:
man i have same problem..(
guys help us plz)
Click to expand...
Click to collapse
Try a factory reset with adb:
Code:
adb reboot wipe
I’m tried , and via fast boot commands too, same result . Nothing happens , watch are rebooting , then again same **** .
May be I need find firmware ISO, but I can’t find
have you unlocked your watch?
1immortal said:
have you unlocked your watch?
Click to expand...
Click to collapse
nope, Im tried to do that too, by Amazfit Tool and by All-in-One-TOOl.
found info about Serial number, Bootloader version , and Amazfit Tool found OS version, BUT on https://unlockamazfit.com/ i have a message that i written wrong OS version. I dont know how to get right version to unlock.
Im also tried to find stock firmware ISO, but failed in that =(
Hi,
ihave used the latest ROM version stratos 2 2.3.11.0
Thanks
Quattres said:
nope, Im tried to do that too, by Amazfit Tool and by All-in-One-TOOl.
found info about Serial number, Bootloader version , and Amazfit Tool found OS version, BUT on https://unlockamazfit.com/ i have a message that i written wrong OS version. I dont know how to get right version to unlock.
Im also tried to find stock firmware ISO, but failed in that =(
Click to expand...
Click to collapse
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
burdag said:
Hi,
ihave used the latest ROM version stratos 2 2.3.11.0
Thanks
Click to expand...
Click to collapse
What?? You installed Stratos firmware in your Stratos 3 watch???
No i only write the OS version for unlock the bootloader.
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
What?? You installed Stratos firmware in your Stratos 3 watch???
Click to expand...
Click to collapse
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Quattres said:
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=4349826312261649290
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
What?? You installed Stratos firmware in your Stratos 3 watch???
Click to expand...
Click to collapse
Quattres said:
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Click to expand...
Click to collapse
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Quattres said:
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Click to expand...
Click to collapse
That's not an error, it's the output when booting the modded recovery in fastboot, and it's ok. After that you should see the ! symbol in watch and the installer should start copying the files to the watch
What do you get in the installer?
Quattres said:
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Click to expand...
Click to collapse
I can confirm the firmware works. Had the same problem and after ROM flash everything works.
I had unlocked my watch first with one in all tool. Maybe that can help you to flash the ROM.
How flashing looks in steps:
https://photos.app.goo.gl/db1yUsyuudcBFgWd6
https://photos.app.goo.gl/egvEwji1e9SzVMKq6
Saratoga79 said:
That's not an error, it's the output when booting the modded recovery in fastboot, and it's ok. After that you should see the ! symbol in watch and the installer should start copying the files to the watch
What do you get in the installer?
Click to expand...
Click to collapse
Darkxy1983 said:
I can confirm the firmware works. Had the same problem and after ROM flash everything works.
I had unlocked my watch first with one in all tool. Maybe that can help you to flash the ROM.
How flashing looks in steps:
https://photos.app.goo.gl/db1yUsyuudcBFgWd6
https://photos.app.goo.gl/egvEwji1e9SzVMKq6
Click to expand...
Click to collapse
Dude thx a lot, I just downloaded ROM, unpacked in C: and run fast boot from folder,then the flashing started! Thx!!!
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
Click to expand...
Click to collapse
I assume this can be used to flash China version A1928 to Global version as long as the bootloader has been unlocked using https://unlockamazfit.com/ ?
evilhomura89 said:
I assume this can be used to flash China version A1928 to Global version as long as the bootloader has been unlocked using https://unlockamazfit.com/ ?
Click to expand...
Click to collapse
It's not tested yet. I recommend you waiting to have a firmware dump of the Chinese version just in case, or if you are really interested and you own the Chinese model, help providing the firmware dump I can provide a Windows tool to do that.
Saratoga79 said:
It's not tested yet. I recommend you waiting to have a firmware dump of the Chinese version just in case, or if you are really interested and you own the Chinese model, help providing the firmware dump I can provide a Windows tool to do that.
Click to expand...
Click to collapse
Hi Saratoga, may I know where can I get the firmware dump? I have the Chinese model of Stratos 3, and I was planning to install the US firmware version above.
jazyen27 said:
Hi Saratoga, may I know where can I get the firmware dump? I have the Chinese model of Stratos 3, and I was planning to install the US firmware version above.
Click to expand...
Click to collapse
I posted the link few post above.
But as I said before, just in case something goes wrong, those with a Chinese model may collaborate to get a dump of the Chinese firmware from their whatc just in case they have to go back to stock/original firmware.
This is just a precaution, because if for some reason the US firmware doesn't work in the Chinese model, nowadays there is no way to restore the watch, that's why I'm asking for the Chinese firmware dump help.
I think jazyen27 thought , how to read dump from watch.........
I can provide a Windows tool to do that.
Click to expand...
Click to collapse
Related
This is the official Firmware For Honor 7X (64GB) Indian Unit (BND-AL10C675) BND-L22
https://drive.google.com/file/d/1gqToopRF7lto1VjOr-1SfcHz9wiVftQN/view?usp=drivesdk
you Can use following methods
1.Dload Method With Unlocking BL
2.TWRP method Unlocking BL
Requirements for Twrp flashing
Twrp image file download from Honor 7x dev.
Extracting UPDATE.APP
thru TWRP flashing all Firmware files.
System.img
Boot.img
Recovery.img
Version.img
Cust.img
Vendor.img
Iam not a developer
so im not responsible for anything
if u like it
post your views.........
comment and share
Regards
Dr.GB
Thanks man, That will certainly help someone in need.
Where you found this one, can you also get the L21 rom?
That would be also great
Thanks
RSGI said:
Thanks man, That will certainly help someone in need.
Where you found this one, can you also get the L21 rom?
That would be also great
Thanks
Click to expand...
Click to collapse
Hello dear....
Im from India
so only Indian variant Firmware available at this point of time.
will try....BND-L21 for EU models
@gouravbharat2014, is this Oreo?
itskapil said:
@gouravbharat2014, is this Oreo?
Click to expand...
Click to collapse
no dear not yet.......
Oreo Still in Beta Testing....for registered users only
this is still 7.0 Nougat
EMUI 5.1
gouravbharat2014 said:
This is the official Firmware For Honor 7X (64GB) Indian Unit (BND-AL10C675) BND-L22
https://drive.google.com/file/d/1gqToopRF7lto1VjOr-1SfcHz9wiVftQN/view?usp=drivesdk
you Can use following methods
1.Dload Method With Unlocking BL
2.TWRP method Unlocking BL
Requirements for Twrp flashing
Twrp image file download from Honor 7x dev.
Extracting UPDATE.APP
thru TWRP flashing all Firmware files.
System.img
Boot.img
Recovery.img
Version.img
Cust.img
Vendor.img
Iam not a developer
so im not responsible for anything
if u like it
post your views.........
comment and share
Regards
Dr.GB
Click to expand...
Click to collapse
Is it the one with face unlock update?
Thetpcguy said:
Is it the one with face unlock update?
Click to expand...
Click to collapse
No its not
Its requesting for a password.....
RSGI said:
Its requesting for a password.....
Click to expand...
Click to collapse
whatsapp me on 9086004153
gouravbharat2014 said:
whatsapp me on 9086004153
Click to expand...
Click to collapse
I can't use Whatup for security reasons...
What is this really? Are you really sharing this or is there another intention?????
Even if i had Whatsapp, WHY would i add you to my contacts? Is that the condition to use your share? Do you only share stuff with someone who adds you in Whatsapp???
I really dont understand this....
@admins
Is this a trading site???
RSGI said:
I can't use Whatup for security reasons...
What is this really? Are you really sharing this or is there another intention?????
Even if i had Whatsapp, WHY would i add you to my contacts? Is that the condition to use your share? Do you only share stuff with someone who adds you in Whatsapp???
I really dont understand this....
@admins
Is this a trading site???
Click to expand...
Click to collapse
try this
dr.gouravbharat
gouravbharat2014 said:
try this
dr.gouravbharat
Click to expand...
Click to collapse
Ohh......
Ok. Thanks.
And also sorry... Bad Mood...
Also that was weird.... and you even might be a very nice guy to be friends in WhatsApp....
Just don't do it like this, ok?
Thank you
RSGI said:
Ohh......
Ok. Thanks.
And also sorry... Bad Mood...
Also that was weird.... and you even might be a very nice guy to be friends in WhatsApp....
Just don't do it like this, ok?
Thank you
Click to expand...
Click to collapse
Would it work on the 32gb model?
Where did you get from is this a official stock firmware
shivraj1 said:
Where did you get from is this a official stock firmware
Click to expand...
Click to collapse
Yup its official one.......without any doubt
Himanshu038 said:
Would it work on the 32gb model?
Click to expand...
Click to collapse
u can try.......
im not sure......
Works on 32GB version aswel....
Himanshu038 said:
Would it work on the 32gb model?
Click to expand...
Click to collapse
It works for my 32gB model Honor 7x. :good:
I also used stock recovery and flashed the mentioned files using fastboot command.
[I didnt try using the TWRP method as I had already flashed by recovery to stock before trying this rom]
the commands looked like this:
"fastboot flash system system.img"
"fastboot flash cust cust.img" and so on.
Hope this helps
Can you explain it clearly brooo.....please urgent broo..
viplavbhandari said:
It works for my 32gB model Honor 7x. :good:
I also used stock recovery and flashed the mentioned files using fastboot command.
[I didnt try using the TWRP method as I had already flashed by recovery to stock before trying this rom]
the commands looked like this:
"fastboot flash system system.img"
"fastboot flash cust cust.img" and so on.
Hope this helps
Click to expand...
Click to collapse
Brooo please explain it clearly brooo its urgent
I doubt it'll work, but I figured I'd ask: Has anyone tried this on the American model? (BND-L24) - I'm gonna test shortly, so I'll be able to confirm whether or not it works. If it does work, I doubt the bands will work properly, if at all, but I'll give it a shot.
Hello Guys , i just bought a new Lenovo z5 from Aliexpress it came with flashboot unlocked and rooted i felt insecure with that , so i tried to lock the flashboot and unroot it ...
but now it's not turning on and this message appears
"Your device is corrupt. It can't be trusted and will not boot
Visit This link on another device : g.co/abh"
Any help please
I have the same problem, the saddest thing is that aliexpess of disregard, and the store that oo you bought tambien.esto is a fudge, just wait until lineage makes you compatible to the z5
i have found the solution
Novatronia said:
I have the same problem, the saddest thing is that aliexpess of disregard, and the store that oo you bought tambien.esto is a fudge, just wait until lineage makes you compatible to the z5
Click to expand...
Click to collapse
just flash this Official Rom : bit. ly /2Qjijzq
and flash it with : bit. ly /2wYLpfG
then you should be alright
ps : Flashboot must be locked
if you use qpst/qfil (which is whst you should be doing) to reflash stock rom it is not nessery to relock the bootloader.
ota also works even tho it tells you it does not, but when you get the notification of an update, you can press update and it will install, but the tool for manualy checking does not work.
mousstq said:
just flash this Official Rom : bit. ly /2Qjijzq
and flash it with : bit. ly /2wYLpfG
then you should be alright
ps : Flashboot must be locked
Click to expand...
Click to collapse
Links not found
diogooskamarada said:
Links not found
Click to expand...
Click to collapse
look in this thread, there are all the links you need.
The thread is to install custom rom, but since you need stock qpst, find it in this thread.
https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/-t3840839
try this link
https://mega.nz/#F!ndhjkT5T!TZ2Gy-HJhJLO_j_GpaNf4A
Check out this video on how to use Qfil
https://youtu.be/TdkNaKpiiUw
rendroid15 said:
look in this thread, there are all the links you need.
The thread is to install custom rom, but since you need stock qpst, find it in this thread.
https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/-t3840839
try this link
https://mega.nz/#F!ndhjkT5T!TZ2Gy-HJhJLO_j_GpaNf4A
Check out this video on how to use Qfil
https://youtu.be/TdkNaKpiiUw
Click to expand...
Click to collapse
I was able to pass the rom, before installing `` gapps.img`` install TWRP, soon after installing the gapps and soon after the supersu, everything via twrp. It worked for me.
*But the following problems appear in the system:
*WI-FI does not start
TWRP is encrypted after flah supersu
SENSORS giroscopico, bussula, metal detector, and others does not work.
Bluetooth tranferencias is also bugged.
Now I want to go back to the stock rom, but all roms are in boot loop `` LENOVO screen FLASHING OR STOPPED``
I can only keep the custom rom. And now someone to help? I need to at least recover the WI-FI.
Are you using qpst/qfil to reflash stock 3.9.075?
sth0r said:
Are you using qpst/qfil to reflash stock 3.9.075?
Click to expand...
Click to collapse
Yes
Hello there.
I am aware that - at the moment - the global version of this phone cannot be unlocked. I'd just like to know when - if ever - the bootloader will be able to be unlocked, and if I can still roll-back to earlier versions of Android with SP Flash Tools (I really don't like how restrictive Android 11 is. Shame on Google.).
Thanks.
+1
I need .apk to RMX2155 - there is a version for this particular model
???
WO_SEBIx said:
+1
I need .apk to RMX2155 - there is a version for this particular model
???
Click to expand...
Click to collapse
What are you asking exactly? If you are asking if the apk method of boot-loader unlocking works for this model: It does not. I am not exactly sure why, though.
I have the same model.
No bootloder unlock.
Tryed different region, flashed different ROM model. No luck.
Rollback a11 to a10 work with this update from recovery.
https://download.c.realme.com/flash/Rollbackpack/realme_7/RMX2151PU_11_OTA_0710_all_UVNJdn3bXH2j.ozip
albatron34000 said:
I have the same model.
No bootloder unlock.
Tryed different region, flashed different ROM model. No luck.
Rollback a11 to a10 work with this update from recovery.
https://download.c.realme.com/flash/Rollbackpack/realme_7/RMX2151PU_11_OTA_0710_all_UVNJdn3bXH2j.ozip
Click to expand...
Click to collapse
Thanks! Where did you get this file? Also: Why is it that it isn't unlockable? Why can't we just use ADB commands?
OrthodoxOxygen said:
Thanks! Where did you get this file? Also: Why is it that it isn't unlockable? Why can't we just use ADB commands?
Click to expand...
Click to collapse
the file from officiel realme web site. it isn't unlockable because realme refuse it for EU version. you can't use ADB commande because kernel dont allow fastboot mode.
albatron34000 said:
the file from officiel realme web site. it isn't unlockable because realme refuse it for EU version. you can't use ADB commande because kernel dont allow fastboot mode.
Click to expand...
Click to collapse
Thanks! Have a great day!
albatron34000 said:
the file from officiel realme web site. it isn't unlockable because realme refuse it for EU version. you can't use ADB commande because kernel dont allow fastboot mode.
Click to expand...
Click to collapse
Just one last question, if you don't mind. Would it be impossible to flash a kernel onto the phone with something like SP Flash Tools or ADB?
OrthodoxOxygen said:
Just one last question, if you don't mind. Would it be impossible to flash a kernel onto the phone with something like SP Flash Tools or ADB?
Click to expand...
Click to collapse
Yes, since R7 kernel is packed inside boot.img
BTW, Global Varants is now unlockable!
To: https://github.com/qiurigao/RMX2202
1.boot to TWRP
fastboot boot twrp.img
Click to expand...
Click to collapse
2. push ROM file to /data/ota.zip
adb push RMX2202_ROLLBACK.zip /data/ota.zip
Click to expand...
Click to collapse
3.TWRP install /data/ota.zip
adb shell "twrp install /data/ota.zip"
Click to expand...
Click to collapse
4.Go stock Recovery Format data
adb reboot recovery
Click to expand...
Click to collapse
5. ROOT - Any version available
fastboot boot twrp.img
adb push Magisk_alpha.zip /tmp/magisk.zip
adb shell "twrp install /tmp/magisk.zip"
Click to expand...
Click to collapse
Download
1.TWRP
Android 11 or Android 12 TWRP-3.6.0_V2.img
2.ROLLBACK file
CN https://drive.google.com/file/d/1TFODtSjRdY2EIVKbgcLgY6AiPOXhqu6I/view?usp=sharing or http://www.mediafire.com/file/j3v0moqzb153nrs/GT_A08_OTA_RMX2202.zip
IN https://download.c.realme.com/flash/Early_Access/IN/RMX2202_ROLLBACK_Android11_IN.zip
EU https://download.c.realme.com/flash/DP1_Android_12/EUEX/RMX2202_ROLL BACK_Android11_EUEX_0609.zip
3. Magisk
https://github.com/topjohnwu/Magisk/releases
Stable magisk will work?
Has anyone tried this to convert their ROM and did it work?
So I tried this and it worked, changed Chinese rom to Global Rom, without having to do copy all the code like in the other convert thread.
I moved from UI3 chinese rom to UI2 global, then just had to certify the device to get access to google play!
can one please make a video orpictures about it?!?!?!?
i don't get into that TWRP
M_B_Y said:
can one please make a video orpictures about it?!?!?!?
i don't get into that TWR
unparalleled82 said:
So I tried this and it worked, changed Chinese rom to Global Rom, without having to do copy all the code like in the other convert thread.
I moved from UI3 chinese rom to UI2 global, then just had to certify the device to get access to google play!
Click to expand...
Click to collapse
Which magisk you are using alpha or stable?
Click to expand...
Click to collapse
I've tried both versions. but I don't quite understand how it all works... (Sorry google translater)
I used magisk alpha through twrp.
I can't do a video sorry, all I wanted to do was let everyone know that it works and seems to be a lot easier(for me anyway) than the other way of trying to get a global ROM working.
I think I'm too stupid for that
can write me a step-by-step guide ?
its literally a step by step guide in the first post.
you'll need the files from the links provided!
unfortunately it doesn't work for me, no idea what I'm doing wrong
Bootloader unlock isn't required?
My bootloader was unlocked, yes
unparalleled82 said:
So I tried this and it worked, changed Chinese rom to Global Rom, without having to do copy all the code like in the other convert thread.
I moved from UI3 chinese rom to UI2 global, then just had to certify the device to get access to google play!
Click to expand...
Click to collapse
Hi, I just have a few questions
1. You used the EU Rom from this thread right? And if so are you receiving OTA updates? According to a different thread on this topic, people are having to use the IN Rom in order to still receive OTA Updates.
2. Are apps like Google Pay working, and other functions of the phone like NFC and 5G working?
1. I used the EU ROM, which is .a09 I was on the ui3 Chinese ROM.
After flashing the ROM I have done an ota update and am now on a.17
2. I'm not sure about Google play as I've rooted the phone and this version of magisk doesn't have hide, so doesn't work
Everything else that wasn't working on Chinese ROM ui3 is working.
Vowifi, volte, NFC, Android auto 5g(no switching problem) all now work
I was considering getting a new phone before this, as so many features were annoying me or missing on the Chinese ROM.
unparalleled82 said:
1. I used the EU ROM, which is .a09 I was on the ui3 Chinese ROM.
After flashing the ROM I have done an ota update and am now on a.17
2. I'm not sure about Google play as I've rooted the phone and this version of magisk doesn't have hide, so doesn't work
Everything else that wasn't working on Chinese ROM ui3 is working.
Vowifi, volte, NFC, Android auto 5g(no switching problem) all now work
I was considering getting a new phone before this, as so many features were annoying me or missing on the Chinese ROM.
Click to expand...
Click to collapse
Hopefully, my final question,
I can't seem to find a way to unlock my bootloader on ui3, may I ask how you unlocked your bootloader?
The only solution I can find at the moment is to downgrade to android 11 ui2 CN Rom .A24 and then unlock the bootloader through that way since the deep testing app for unlocking the bootloader will not install on ui3 for me.
Thanks in advance!
(ps. I don't have the app already installed, I have checked 5 times already.)
You might need to downgrade back to UI 2 as I unlocked my bootloader using deep test before updating to UI3. (Yeah I looked at that after I had gone to UI3 and it said it was already installed, but couldn't find it or search for it either)
Hi again, what am I ment to do from here? This is after doing the fourth step. @unparalleled82
kjpern said:
Hi again, what am I ment to do from here? This is after doing the fourth step. @unparalleled82
Click to expand...
Click to collapse
Depends if you want to root it or not. If not then just reboot and should be on the version you've installed
unparalleled82 said:
Depends if you want to root it or not. If not then just reboot and should be on the version you've installed
Click to expand...
Click to collapse
Well, something has gone wrong. when rebooting it only seems to go to the realme UI recovery I didn't want root so I could use Google Pay. I am not sure what do do now. Should I wipe data, and try to redo the whole thing? (edit: if you are a newcomer and see this message, be sure to look at page 2 (spoiler: it worked!))
Hi all, How do I go back to factory standard rom & firmware and also unroot too ?
Cheers in advance.
madant2011 said:
Hi all, How do I go back to factory standard rom & firmware and also unroot too ?
Cheers in advance.
Click to expand...
Click to collapse
Hi,
Check my guide "Clean Install Official Stock MIUI ROM & Relock Bootloader" at my POCO F1 Ultimate Collection & Guides thread.
Retrial said:
Hi,
Check my guide "Clean Install Official Stock MIUI ROM & Relock Bootloader" at my POCO F1 Ultimate Collection & Guides thread.
Click to expand...
Click to collapse
Cheers, Ive been looking through the entire guide and for some reason mi flash tool will not reconize the fastboot rom or my phone ?
madant2011 said:
Cheers, Ive been looking through the entire guide and for some reason mi flash tool will not reconize the fastboot rom or my phone ?
Click to expand...
Click to collapse
Then read the AMD/Intel Fastboot fix guide
If you still have issues let me know.
Hi again Retrial, I have read everything on the AMD/Intel Fastboot fix guide and also installed every single for the complete guide list too and still nothing at all
madant2011 said:
Hi again Retrial, I have read everything on the AMD/Intel Fastboot fix guide and also installed every single for the complete guide list too and still nothing at all
Click to expand...
Click to collapse
Have you tried with other version of MiFlash tool?
Try to get it from here. (There is also a password for unzip there)
i have tried every single MiFlash tool availible on the internet and still nothing
Retrial this is what i am getting no matter what ive tried
madant2011 said:
Retrial this is what i am getting no matter what ive tried
Click to expand...
Click to collapse
Are you sure you downloaded the Official Stock ROM and unzip it before you put the file in miflash tool?
Retrial said:
Are you sure you downloaded the Official Stock ROM and unzip it before you put the file in miflash tool?
Click to expand...
Click to collapse
I'm certain
madant2011 said:
I'm certain
Click to expand...
Click to collapse
If you can share a video from the moment you open MiFlash tool and the steps you doing to check.
I cannot think something else, why it doesn't work if you follow all the steps.
I'm trying to upload a vid but it won't let me
1
madant2011 said:
1
Click to expand...
Click to collapse
3
madant2011 said:
3
Click to expand...
Click to collapse
5
6
7
8