@Agrim720 has developed a super kernel for the Galaxy A20
For phones running a GSI with the U2 bootloader (June 2019 Firmware)
1. Download the new zimage and hktweaks from here.
https://forum.xda-developers.com/showpost.php?p=81010583&postcount=144
2. Follow my installation instructions here.
https://forum.xda-developers.com/showpost.php?p=81013993&postcount=145
The quick way is to download and unzip my new boot.img and install it from TWRP.
View attachment boot.zip
Just have your original patched boot.img ready just in case. If things go wrong, you just need to install your boot.img to get back to where you were.
For phones with the U3-U4 bootloader (late Oct - Nov 2019) @Agrim720 has developed his ripper kernel here
https://forum.xda-developers.com/galaxy-a20/development/kernel-ripper-kernel-v1-0-t4020627
The stock kernel allocates 2 core at 1.56GHz and 6 cores at 1.352GHz
The super kernel increases the CPU speeds to 2 cores at 2.184GHz and 6 at 1.586GHz
If you want to see the highest frequencies, you need to use hktweaks to set the minimum frequencies to equal the maximum frequencies.
If you don't use hktweaks, it will generally restrict itself to 1.768GHz and 1.482GHz
Big 2080-2184
Small 1352 - 1586
GPU 545-676
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
physwizz said:
Big 2080-2184
Small 1352 - 1586
GPU 545-676
Click to expand...
Click to collapse
Thank you @Agrim720 @physwizz
Nice upgrade to our phone performance
Sent from my SM-A205F using XDA Labs
I wish I could use it, cant install TWRP on my phone.
Deluriane said:
I wish I could use it, cant install TWRP on my phone.
Click to expand...
Click to collapse
Why not?
physwizz said:
Why not?
Click to expand...
Click to collapse
I have october update
Deluriane said:
I have october update
Click to expand...
Click to collapse
go through this.
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
Agrim720 said:
go through this.
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
Click to expand...
Click to collapse
Look forward to seeing the results
I just tried to backup with this kernel in place and it wouldn't backup data.
I had to reflash my patched stock boot.img
physwizz said:
I just tried to backup with this kernel in place and it wouldn't backup data.
I had to reflash my patched stock boot.img
Click to expand...
Click to collapse
its a twrp thing not kernel related.
@physwizz
Can't seem to make it boot up. I followed all your instructions, maybe I have to use a GSI Rom?
Deluriane said:
@physwizz
Can't seem to make it boot up. I followed all your instructions, maybe I have to use a GSI Rom?
Click to expand...
Click to collapse
Possibly.
I'm on June firmware
Deluriane said:
@physwizz
Can't seem to make it boot up. I followed all your instructions, maybe I have to use a GSI Rom?
Click to expand...
Click to collapse
Hi @Deluriane
You do NOT need GSI. It will work on any firmware now.
I just did a full Root / Twrp on the latest stock firmware from NOV. [ A205GUBU4ASK2 ] and it worked perfectly.
Just follow the correct guide for U4 and use the correct boot.img (compressed to a tar) and it WILL work :good:
Try it and let us know. :cyclops:
physwizz said:
@Agrim720 has developed a new kernel for the Galaxy A20
1. Download the new zimage and hktweaks from here.
https://forum.xda-developers.com/sho...&postcount=144
2. Follow my installation instructions here.
https://forum.xda-developers.com/sho...&postcount=145
The quick way is to download and unzip my new boot.img and install it from TWRP.
View attachment 4891171
Just have your original patched boot.img ready just in case. If things go wrong, you just need to install your boot.img to get back to where you were.
Click to expand...
Click to collapse
@physwizz
Update links please
Thibor69 said:
Hi @Deluriane
You do NOT need GSI. It will work on any firmware now.
I just did a full Root / Twrp on the latest stock firmware from NOV. [ A205GUBU4ASK2 ] and it worked perfectly.
Just follow the correct guide for U4 and use the correct boot.img (compressed to a tar) and it WILL work :good:
Try it and let us know. :cyclops:
Click to expand...
Click to collapse
Okay, trying my luck again and this time I'm gonna use TWRP and not flash it on Odin.
Thibor69 said:
@physwizz
Update links please
Click to expand...
Click to collapse
I think the links have been deleted because the kernel doesn't follow the rules
Deluriane said:
Okay, trying my luck again and this time I'm gonna use TWRP and not flash it on Odin.
Click to expand...
Click to collapse
Umm I thought you said you did not have TWRP or you could not install TWRP due to Nov update. I am sorry if I missunderstood...
Thibor69 said:
Umm I thought you said you did not have TWRP or you could not install TWRP due to Nov update. I am sorry if I missunderstood...
Click to expand...
Click to collapse
I dont have it installed right now since went back to stock since installing GSI, going to try out the custom kernel, reroot and reinstall TWRP.
Didnt have TWRP before when I tried installing the kernel using Odin, but since Agrim720 released a TWRP and worked on my phone didnt try to install the kernel again.
Related
Here is the latest AMJ3 ROM, modem and kernel for our i8190 devices. Don't try to install it any other variation of the SIII mini! Just download and install via recovery. If you don't have network once booted after flashing modem, just reboot and it will be OK.
ROM
This is the stock AMJ3 ROM with some changes:
Rooted with Chainfire's SuperSU
Pre-installed busybox for apps
All apps deodexed for flexibility
All apps zipaligned for performance
The zip file is signed
The ROM was debloated of some unnecessary apps. I removed exactly the same apps as tys0n's on his ROMs to be on the safe-side. You can download any of this apps using tys0n's repository.
The zip file contains the AMJ3, so you don't need to flash it separately. The installer will automatically wipe system/cache/dalvik partitions. If you are coming from a non-stock ROM, please wipe data yourself using your recovery. This ROM can be flashed using both TWRP and CWM, but I recommend TWRP.
If you want to update your baseband along with the ROM, flash the modem from this thread.
Download: https://mega.co.nz/#!wMlAwKTD!O2wNgn0OTvNYTzjt3GZqQVa5MURToMyzIkc0nom2tPU
MD5 checksum: 59cd1790bcabf8cb58288f18732b46eb i8190xxamj3.zip
If you don't have a recovery, you can use my Odin package. This will flash AMJ3 ROM, kernel and baseband, plus a TWRP recovery modified by Maclaw so it works with Android 4.4 KitKat ROMs. If you have a non-stock ROM installed, make sure you boot into recovery after flashing and do a factory reset!
For flashing this, make sure only Auto Reboot and F. Reset Time are checked, select the file clicking in PDA and hit start.
Download Odin Package: https://mega.co.nz/#!lV9wlRwa!LZHXF35W-JPJETUW0YPYhx49pBZWTJzW7PjJwugmfUk
Note that I compressed this file using 7zip. This way the file will be 100MB+ smaller than using zip and speed up my upload and your download. It's a win-win! If you don't know how to extract it, download 7zip.
Modem (baseband)
https://mega.co.nz/#!FAlWSApA!KsnCOmH5zI6ynml8Df_rWTpxdlYyT_GLgSMMbnpTkgE
Kernel
https://mega.co.nz/#!dNEgyQBZ!Dd_qvmaid24ZukAjJBHDcjoLKyA8_4HcMCVcoSlSQaE
Both modem and kernel installers are based on tys0n's work. The modem is a copy-cat from somin.n's work.
Enjoy!
Updated with kernel Have fun
Hi,
Q: Extracted from which ROM?
Downloaded modem from mega and from xda too but got update error :/ Can you check it please... Btw thank for it ofcourse
somin.n said:
Downloaded modem from mega and from xda too but got update error :/ Can you check it please... Btw thank for it ofcourse
Click to expand...
Click to collapse
I'll check it out. It worked here, must have something to do with the file I uploaded.
joelalmeidaptg said:
I'll check it out. It worked here, must have something to do with the file I uploaded.
Click to expand...
Click to collapse
I have the same probl here, fix it please.
OK I found what it is. I'm going to take out the links and post back once I upload the files. Sorry!
joelalmeidaptg said:
Updated with kernel Have fun
Click to expand...
Click to collapse
hi bud,
thanks for latest kernel and modem
Can anyone tell me whats new in this rom? Samsung doesn't provide any changelog as usually.
Fixed the modem. Everything should be fine now. Uploading the kernel!
Gusta_HR said:
Can anyone tell me whats new in this rom? Samsung doesn't provide any changelog as usually.
Click to expand...
Click to collapse
which ROM???
these are just updates for kernel and modem
joelalmeidaptg said:
Fixed the modem. Everything should be fine now. Uploading the kernel!
Click to expand...
Click to collapse
Works perfect now with cm10.2. Thanks a lot bud)
mauam said:
Works perfect now with cm10.2. Thanks a lot bud, will push your thanks tomorrow
Click to expand...
Click to collapse
dito bud,
waiting for the kernel
Aaaaand kernel is up. I'm going to try to deodex/root/debloat the ROM now. It will be my first time so I can't promise I can make it
joelalmeidaptg said:
Aaaaand kernel is up. I'm going to try to deodex/root/debloat the ROM now. It will be my first time so I can't promise I can make it
Click to expand...
Click to collapse
you will try it with OTA-Kitchen ???
btw kernel and modem update work great - thanks
Just finished the ROM. It is going to take a while since my upload speed sucks. Probably it will be ready in about one hour
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I uploaded the ROM. Please let me know if everything is working - first timer here!
Have fun
JackoMJ said:
which ROM???
these are just updates for kernel and modem
Click to expand...
Click to collapse
Wtf r u talking about. Its a new f****in Stock Samsung build i8190XXAMJ3. When did you see only modem and kernel update???? Kernel and modem are ripped out of new rom build.
Gusta_HR said:
Wtf r u talking about. Its a new f****in Stock Samsung build i8190XXAMJ3. When did you see only modem and kernel update???? Kernel and modem are ripped out of new rom build.
Click to expand...
Click to collapse
hey little boy,
calm down, be friendly, use other words and don´t be so aggressive!
Posting that:
which ROM??? these are just updates for kernel and modem
Click to expand...
Click to collapse
, there was only modem and kernel for download.
Look at the upload-date of the ROM.
When you are frustrated, aggressive or something else, go to the gym or in the wood and let your rage out there
JackoMJ said:
hey little boy,
calm down, be friendly, use other words and don´t be so aggressive!
Posting that: , there was only modem and kernel for download.
Look at the upload-date of the ROM.
When you are frustrated, aggressive or something else, go to the gym or in the wood and let your rage out there
Click to expand...
Click to collapse
I agree, no need for that language.
Q:
Can you make this Odin flashable?? I dont have cwm or TWRP for now...
TNX in advance!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the new Project Fi LVY48C 5.1.1 Stock ROM. The rom has simply been rooted and made flashable.
Rom Features
*Stock Android 5.1.1 Project Fi LVY48C base
*Rooted
*Busybox
*No force encrypt kernel
*Persistent ADB enabled
Flash instructions
*Download ROM from link below
*Backup current ROM
*Flash ROM using TWRP
*For best results clean wipe but may not be needed
Disclaimer
I am not responsible for any damage done to your device, either hardware or software. You use the ROM at your own risk. We will try to help resolve any issues you have, but we make no guarantees in doing so.
Download
Link removed, old rom no longer supported
MD5: 36aa79cce55db5dd306372d53411145d
Sharing policy
You are free to use this ROM as your base, you do not need to ask me for permission, but please give me credit for using the base.
Mods
Check out Post #2 for extra mods specific for this rom!
Mods
In this section I will add some use addons that you can flash on the base rom. Again these can be used in your ROM, but if you do, you must give me permission.
SuperSU in Settings
This mod will move the SuperSU icon from the app drawer into the settings menu.
Download
Modded Settings.zip
MD5: 352a0ade2366d37bd5a76ffe47fc5bbb
For Bootloader, Radio and Recovery updates see the following thread:
[FXZ][OTA] Nexus 6 Recovery Flashable Fastboot Files (Unlocked Bootloader Only)
Scroll down until you find LVY48C (5.1.1 Project Fi)
ROM is up enjoy!
What about boot loader and radio?
Sent from my Google Nexus 6
I'm luvin' it.
Downloading, so the VYZ28E boot loader and radio will work?
Sent from my Google Nexus 6
lcchan1 said:
What about boot loader and radio?
Sent from my Google Nexus 6
Click to expand...
Click to collapse
You can download them from here: [FXZ][OTA] Nexus 6 Recovery Flashable Fastboot Files (Unlocked Bootloader Only)
Thanks.
Sent from my Google Nexus 6
---------- Post added at 11:48 AM ---------- Previous post was at 11:34 AM ----------
lcchan1 said:
Thanks.
Looks like boot loader is the same, only the radio is difference.
Sent from my Google Nexus 6
Click to expand...
Click to collapse
Sent from my Google Nexus 6
Guys hold off on downloading for a bit. Looks like my upload has got corrupted. I am going to re-upload now.
Ok new ROM has been uploaded sorry about that!
Modded Settings Zip Download not working. Thanks
Nice. Thanks for this. I've been checking everyday for a stock rooted Fi build. Much appreciated sir.
Sent from my Nexus 6 using Tapatalk
Stephen said:
Ok new ROM has been uploaded sorry about that!
Click to expand...
Click to collapse
Thanks Stephen, appreciate your continued development!
hedgehogmd said:
Modded Settings Zip Download not working. Thanks
Click to expand...
Click to collapse
Me too
I am new to N6 for just two weeks and thanks for the flashable zip. I just want to know if my N6 is on LMY47Z, rooted and not encrypted with bootloader unlocked. What I need is just boot into TWRP recovery, wipe and flash the zip, that's it? Thanks!
tonyfung820 said:
I am new to N6 for just two weeks and thanks for the flashable zip. I just want to know if my N6 is on LMY47Z, rooted and not encrypted with bootloader unlocked. What I need is just boot into TWRP recovery, wipe and flash the zip, that's it? Thanks!
Click to expand...
Click to collapse
Yes. Well you can do more. Go here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052, go down to LVY48C (5.1.1 Project Fi), download the Radio only (02.102) Standard:**click the link** and flash that too. Doesn't matter which one you flash first.
hedgehogmd said:
Modded Settings Zip Download not working. Thanks
Click to expand...
Click to collapse
Just spotted that and fixed the link. It is available to download now.
tonyfung820 said:
I am new to N6 for just two weeks and thanks for the flashable zip. I just want to know if my N6 is on LMY47Z, rooted and not encrypted with bootloader unlocked. What I need is just boot into TWRP recovery, wipe and flash the zip, that's it? Thanks!
Click to expand...
Click to collapse
Yes thats fine, simply backup your current ROM in TWRP, then I would wipe and install the new ROM for best results, Try with out wiping first to see if it upgrades ok.
drkow19 said:
Yes. Well you can do more. Go here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052, go down to LVY48C (5.1.1 Project Fi), download the Radio only (02.102) Standard:**click the link** and flash that too. Doesn't matter which one you flash first.
Click to expand...
Click to collapse
I would recommend not flashing the stock recovery, but it would be a good idea to flash bootloader and radio as well.
Sorry for a potentially dumb question, but is this only for those using Fi? Or will it activate under att just fine?
Can I flash this stuff on a Sprint enabled Nexus 6? And still use the Sprint network.
fankuan19 said:
Sorry for a potentially dumb question, but is this only for those using Fi? Or will it activate under att just fine?
Click to expand...
Click to collapse
puertorecon said:
Can I flash this stuff on a Sprint enabled Nexus 6? And still use the Sprint network.
Click to expand...
Click to collapse
I assume so yes. I had been testing it on my international Nexus 6 and it connected with all my APN settings with out any issue. Just back up your current ROM first, before you flash., then you can simply restore backup if there are any issues.
Post your review please ?
Download link -
http://bigota.d.miui.com/V8.2.4.0.MALMIDL/miui_HM3SGlobal_V8.2.4.0.MALMIDL_a5d58e63b8_6.0.zip
Easily flashable via stock recovery.
Steps -
(You need to remain connected to Internet/Wifi, as updater verifies the package)
1. Go to updater
2. Click the 3 dots icon on top right
3. Click "choose update package"
4. Choose this zip
5. Click Ok
Whole process may take 15 min - 30 min. In my case it took about 20 mins.
Enjoy ?
Full changelog -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
impulsar said:
How many of you got it? What's changed? Your review please ?
Click to expand...
Click to collapse
It's nightly build right?
arceuss said:
It's nightly build right?
Click to expand...
Click to collapse
Yup, but its stable
impulsar said:
Yup, but its stable
Click to expand...
Click to collapse
Is there any fastboot Rom of miui 8.2.4.0?
arceuss said:
Is there any fastboot Rom of miui 8.2.4.0?
Click to expand...
Click to collapse
Not sure, you could check on miui.com or you can download the zip and flash it via stock recovery
Well, I felt that
Update is not that exciting
Everything is same as mini 8
This has better stability
Good carrier connection till now
Has added features of global development rom
Camera captures from fingerprint also.
Little bit better battery I feel.
For me first boot Took really long time.
arceuss said:
Well, I felt that
Update is not that exciting
Everything is same as mini 8
This has better stability
Good carrier connection till now
Has added features of global development rom
Camera captures from fingerprint also.
Little bit better battery I feel.
For me first boot Took really long time.
Click to expand...
Click to collapse
Thanks for the review bro, did you flash it via stock recovery?
impulsar said:
Thanks for the review bro, did you flash it via stock recovery?
Click to expand...
Click to collapse
Yes
Updated to miui 8.2.4.0, would give a short review after testing it for one day (and yeah it's global stable ?)
Can you tell me what is nightly on MIUI , heard it for first time also how to extract update links.
Battlecreed5 said:
Can you tell me what is nightly on MIUI , heard it for first time also how to extract update links.
Click to expand...
Click to collapse
Nightlies are generally meant for beta testers only, and you can extract update links via logcat
impulsar said:
Nightlies are generally meant for beta testers only, and you can extract update links via logcat
Click to expand...
Click to collapse
Can you tell me how.
Battlecreed5 said:
Can you tell me how.
Click to expand...
Click to collapse
http://www.droid-life.com/2014/06/05/download-nexus-ota-url-file/
arceuss said:
Yes
Click to expand...
Click to collapse
Sorry, but Can I flash this Rom (.zip) via Custom Recovery, I have Unlocked bootloader, Root and TWRP and I am on 8.1.1.0.
kukuteku said:
Sorry, but Can I flash this Rom (.zip) via Custom Recovery, I have Unlocked bootloader, Root and TWRP and I am on 8.1.1.0.
Click to expand...
Click to collapse
Yes. Use twrp. It might take some time don't worry. Once finished disable dm verify. And reboot.
arceuss said:
Yes. Use twrp. It might take some time don't worry. Once finished disable dm verify. And reboot.
Click to expand...
Click to collapse
Thank. I wont lose the TWRP and the unlocked bootloader, right?
kukuteku said:
Thank. No wont lose the TWRP and the unlocked bootloader, right?
Click to expand...
Click to collapse
100% you won't lose unlocked bootloader. Twrp, even if lost it might be due to some mistake during flashing, can be recovered by flashing it using fastboot mode. You may have to wipe (just wipe no need to format anything in data partition) before installation. I think dirty flash won't work.
arceuss said:
100% you won't lose unlocked bootloader. Twrp, even if lost it might be due to some mistake during flashing, can be recovered by flashing it using fastboot mode. You may have to wipe (just wipe no need to format anything in data partition) before installation. I think dirty flash won't work.
Click to expand...
Click to collapse
Thank a lot!
:good:
Whom do I request to move this thread to ROMs/Kernels section?
impulsar said:
Whom do I request to move this thread to ROMs/Kernels section?
Click to expand...
Click to collapse
Ask the forum moderator who just closed a previous thread.
To be claim, i am NOT the maintianer.
Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.
CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"
Three steps to flash:
1,Backup all your data and unzip the file you downloaded from github BTW.
2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.
BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.
Hope you success.
If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
vanpopel said:
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
Click to expand...
Click to collapse
I flash it on my Mi 11 Lite 5G and it work.
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
rayman95 said:
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
Click to expand...
Click to collapse
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
paatha13 said:
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
Click to expand...
Click to collapse
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
ZeroSherd said:
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
Click to expand...
Click to collapse
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
rayman95 said:
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
Click to expand...
Click to collapse
I did finding a way to get R/W according to patch the ROM without TWRP
ZeroSherd said:
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
Click to expand...
Click to collapse
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
paatha13 said:
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
Click to expand...
Click to collapse
Of course, i will upload it to NETDISK after i finish my OT work that i may need half or A day to done it.
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
rayman95 said:
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
Click to expand...
Click to collapse
I think you can use ADB command or software to disable those GAPPS.
How do I backup the data if there is no custom recovery available?
In_a_state said:
How do I backup the data if there is no custom recovery available?
Click to expand...
Click to collapse
I highly recommand the TitaniumBackup if you got ROOT, or use MIUI backup which inside the settings.
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
What's the way to go back to stock if got issues on PE???
Thanks
paatha13 said:
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
Click to expand...
Click to collapse
Think most people are waiting on a working twrp recovery.
rayman95 said:
What's the way to go back to stock if got issues on PE???
Thanks
Click to expand...
Click to collapse
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZeroSherd said:
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.View attachment 5323491
Click to expand...
Click to collapse
where do you get this???
here what I have from last EU fastboot rom...
I want to root my a52 5g (SM-A526B/DS)
Yes it can, just follow this tutorial.
Installation
The Magic Mask for Android
topjohnwu.github.io
Any phone can be rooted, as long as you can unlock the bootloader.
Please read the instructions on the page carefully and don't skip any text. All of it is important.
DionisieS said:
Yes it can, just follow this tutorial.
Installation
The Magic Mask for Android
topjohnwu.github.io
Any phone can be rooted, as long as you can unlock the bootloader.
Please read the instructions on the page carefully and don't skip any text. All of it is important.
Click to expand...
Click to collapse
I unlocked the bootloader from the dev settings but then i found out twrp does not seem to support the 5g edition
SnikkerCC said:
I unlocked the bootloader from the dev settings but then i found out twrp does not seem to support the 5g edition
Click to expand...
Click to collapse
You don't need TWRP to root this phone.
DionisieS said:
You don't need TWRP to root this phone.
Click to expand...
Click to collapse
Don't i brick the phone then?
SnikkerCC said:
Don't i brick the phone then?
Click to expand...
Click to collapse
How would you brick it? Please read the guide I linked, it's a very simple process
DionisieS said:
How would you brick it? Please read the guide I linked, it's a very simple process
Click to expand...
Click to collapse
Ok thanks!
DionisieS said:
How would you brick it? Please read the guide I linked, it's a very simple process
Click to expand...
Click to collapse
I'm having some problems with the guide, it doesn't give a tutorial with the stock ROM it only show custom ROM
SnikkerCC said:
I'm having some problems with the guide, it doesn't give a tutorial with the stock ROM it only show custom ROM
Click to expand...
Click to collapse
And... the stock rom from my SM-A526B/DS is not anywhere online
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what you care about. This is not a custom ROM, you are literally downloading the stock ROM and patching Magisk on it.
DionisieS said:
View attachment 5426313
This is what you care about. This is not a custom ROM, you are literally downloading the stock ROM and patching Magisk on it.
Click to expand...
Click to collapse
The stock rom is not available with that tool
only a52 4g
SnikkerCC said:
The stock rom is not available with that tool
only a52 4g
Click to expand...
Click to collapse
What tool? Use this one. Your model number is SM-A526B. Put that in there and then select your region, but be careful not to select a carrier-locked version.
DionisieS said:
What tool? Use this one. Your model number is SM-A526B. Put that in there and then select your region, but be careful not to select a carrier-locked version.
Click to expand...
Click to collapse
Ok i will look at it
Stock ROM is also available on both sammobile and samfw to download. Which is where I got mine when I rooted the same model. You will also need universal safteynet magisk module to pass safteynet.
Edit: if you know how you only need to extract the boot file from the firmware convert it to a .tar and patch that. Much easier than the whole ap file
Ryola said:
Stock ROM is also available on both sammobile and samfw to download. Which is where I got mine when I rooted the same model. You will also need universal safteynet magisk module to pass safteynet.
Edit: if you know how you only need to extract the boot file from the firmware convert it to a .tar and patch that. Much easier than the whole ap file
Click to expand...
Click to collapse
I also tried everything but failed. hope someone can help, at least twrp for A528b
DionisieS said:
View attachment 5426313
This is what you care about. This is not a custom ROM, you are literally downloading the stock ROM and patching Magisk on it.
Click to expand...
Click to collapse
i have done but A528B is not like other phones. i get stopped at the boot screen, after a few minutes it turns itself off. can't succeed with patchwork magisks
What does tripping knox do?
SnikkerCC said:
What does tripping knox do?
Click to expand...
Click to collapse
It blocks you from using some Samsung apps. Like Samsung pay. Secure folder. Samsung health
And fingerprint sensor? Because it says knox on it
SnikkerCC said:
And fingerprint sensor? Because it says knox on it
Click to expand...
Click to collapse
No my fingerprint sensor is working in all apps