Hello,
So I have a problem,
I just bought the box MXQ PRO+ (2gb ram, 16gb rom) a chinese site , except that once I do the update, the box will not boot :crying: (blue LED lit)
there is no reset boutton derrier output vd :cyclops:
how to reset without reset boutton? :silly:
there is no one to help me???
I'm not sure what experience you have with android but it sounds like you need to flash a firmware. If you search Google for mxq pro you'll find the web site from the manufacturer. There you can DL the firmware. If you search Google for info on how to flash or sideload a firmware, you'll be able to get directions on that. My research tells me that you'll need a male to male USB A cable to make it work. Oh and a computer of course. Hope this helps.
Sent from my KFFOWI using XDA-Developers mobile app
thank you for your reply,
I have a usb cable male, but the computer does not detect the box,
I install USB BURNING TOOLS but nothing happens
follow the guide linked to here
http://forum.xda-developers.com/showthread.php?t=3400814
Sent from my SM-G920F using XDA-Developers mobile app
You seem to keep missing the part about the MXQ Pro PLUS does not have a reset button anywhere. Mine was rebooting while streaming. Tech support was no help except to tell me there's no reset button. I tried to do a fresh install from the SD-card and now it won't boot up. How do I do a restore without a reset button?
Tutorial
https://www.entertainmentbox.com/lat...ndroid-tv-box/
Firmwares
https://drive.google.com/folderview?...&usp=drive_web
http://pan.baidu.com/wap/share/home?...479075&third=0
https://www.dropbox.com/s/2l0hhi6z02...160509.7z?dl=0
http://freaktab.com/forum/advertiser...o-amlogic-s905
Hello all, I'm creating this thread with all the information that I was able to gather from different threads and sources.
This device is being given away by Claro Argentina as a video stream platform (similar to Netflix?)
The hardware:
MT8127 (Driver detected as MT65xx) (not sure)
Info from vendor
http://www.coship.com/en/ProductView.aspx?id=464
Quad Core 1.5G ARM Cortex A7 11,000DMIPS CPU
Mali MP450 Quad Core GPU
Android 4.4 Kitkat
8GB NAND (up to 32GB)
1GB DDR3 (up to 2GB)
HEVC/H.265 Decoder
Bluetooth 4.0 Lowe Energy
2.4G/5G Dual Band WiFi
Playready DRM
Possible ways to flash it.
1. load scatter file from firmware to SP Tools and click download from PC.
2. Disconnect the usb connected to the PC (use the usb near to the optical output) and also the power cable of the N9090c.
3. Connect the USB (use the usb near to the optical output) to an 2.0 USB of the PC.
4. Connect the power cable to the N9090c.
5. Done!. SP Tools start flashing the firmware.
If does not work there is a jumper inside that box that it seems that put the usb in debug mode.
Put the jumper and try again.
Another possibility is using what appears to be a JTAG port on the board.
Image JTAG
I was able to connect but first shows correct characters and then garbage...
As you can see on image ADB
Current problem, how can we take a full backup of the current firmware???
I'm not able to connect it using Mtk_Droid_Tool_v2.5.3
Sources for the information:
http://foros.3dgames.com.ar/operadoras.487/923710.claro-esta-regalando-android-tv-box.html
For an old coship but the N9090c is discussed at the end.
https://forum.xda-developers.com/android/help/help-mediatek-8563-8658-device-coship-t3187554
Hello Friend! I am finishing a rom stock for this device, I will be sharing it in the forum in a few days...
Regards!
Hi there, I have the same box with Coship n9090 and I tried to flash it with the ROM i found here :
But I have NO wifi , NO Remote control etc... Could someone help me to get it back.
If someone have any solution please share it, thank you.
Hello how are you?
Hello How are you coud you bring the firmware please i need it because my smart tv is broken and the official firmware of claro video its too bad please :crying: :crying: :crying:
if you could sen me an email at [email protected]
Regards!
Stock ROM Coship N9090
Faq88 said:
Hello Friend! I am finishing a rom stock for this device, I will be sharing it in the forum in a few days...
Regards!
Click to expand...
Click to collapse
By any chance, any news on the stock rom for this box thanks in advance.
how to download firmware?
germanarg said:
Hello all, I'm creating this thread with all the information that I was able to gather from different threads and sources.
This device is being given away by Claro Argentina as a video stream platform (similar to Netflix?)
The hardware:
MT8127 (Driver detected as MT65xx) (not sure)
Info from vendor
http://www.coship.com/en/ProductView.aspx?id=464
Quad Core 1.5G ARM Cortex A7 11,000DMIPS CPU
Mali MP450 Quad Core GPU
Android 4.4 Kitkat
8GB NAND (up to 32GB)
1GB DDR3 (up to 2GB)
HEVC/H.265 Decoder
Bluetooth 4.0 Lowe Energy
2.4G/5G Dual Band WiFi
Playready DRM
Possible ways to flash it.
1. load scatter file from firmware to SP Tools and click download from PC.
2. Disconnect the usb connected to the PC (use the usb near to the optical output) and also the power cable of the N9090c.
3. Connect the USB (use the usb near to the optical output) to an 2.0 USB of the PC.
4. Connect the power cable to the N9090c.
5. Done!. SP Tools start flashing the firmware.
If does not work there is a jumper inside that box that it seems that put the usb in debug mode.
Put the jumper and try again.
Another possibility is using what appears to be a JTAG port on the board.
Image JTAG
I was able to connect but first shows correct characters and then garbage...
As you can see on image ADB
Current problem, how can we take a full backup of the current firmware???
I'm not able to connect it using Mtk_Droid_Tool_v2.5.3
Sources for the information:
http://foros.3dgames.com.ar/operadoras.487/923710.claro-esta-regalando-android-tv-box.html
For an old coship but the N9090c is discussed at the end.
https://forum.xda-developers.com/android/help/help-mediatek-8563-8658-device-coship-t3187554
Click to expand...
Click to collapse
Faq88 said:
Hello Friend! I am finishing a rom stock for this device, I will be sharing it in the forum in a few days...
Regards!
Click to expand...
Click to collapse
Any news of this? Because Android version it's too old. I'm unable to install basic apps like Netflix or similar
Hi folks, I'm hoping someone can help me unbrick my MXQ Pro 4k. I've searched high and low for the stock firmware but it is nowhere to be found. My box seems to be a peculiar variant and the specs are as follow:
S905x 1GB/8GB S905XQ_V2.0 2017.05.16
SV6051P Wifi
SK Hynix H27UCG812ETR DDR3
It became bricked when I tried to flash different atvXperience firmware img files with the Amlogic USB burn tool. I had successfully flashed it with a version posted by minixfreak on the freaktab forums.
Although not with exactly the same specs, it worked pretty well except for the remote control wouldn't function. So I tried to flash again with what I thought was the stock firmware but unfortunately, that bricked the box pretty good. I tried to revert to the atvXperience firmware that worked from the post, but it now always fails at 7% when trying to format with USB tool. In all cases, I've tried every possible combination of pushing in the reset button in the AV port, shorting the NAND pins, switching the order of USB ports... The box always has a red light when powered and is always recognized by the USB Burn Tool driver when connected to the OTG port on the box but always stops at 7% when it attempts to format.
I hooked up a serial usb/ttl cable to capture boot output, turned on the box and it seems the box is in an infinite loop with the following output:
LOOP:8F;EMMC:800;NAND:85;SD:800;USB:8;LOOP:90;EMMC :800;NAND:85;SD:800;USB:8. It appears the bootloader is corrupt or maybe has been erased.
I tried making a bootable sd card using both burncard maker and bootcard maker but that didn't work either as it can't get past intial boot attempt, even pressing reset or shorting nand pins. I'm not sure if it's because of the boot loop or perhaps incorrect firmware. I haven't been able to find the definitive stock firmware anywhere. I would appreciate help in finding this elusive firmware.
I've scoured the internet for a solution and tried many different things but nothing can get me out of this loop. I'm now at a dead end.
I once had a bricked router that I was able to fix by connecting usb/ttl and putty and repeatedly hitting Ctrl-C after rebooting to get a CFE prompt. At that point I was able to manually flash the router with firmware and revive it. Maybe there's a tool available that would possibly do something like that with the android box?
Also possible I guess that something in the hardware is toast and it's just a paper weight now. Anyway, any help and suggestions would be appreciated.
I have a kingnovel based tv box the kingnovel X10 MAX S905X3 model that is 4gb ddr3 ram and 32gb rom storage.
It will connecf to my pc and is seen in the Amlogic usb burning tool as connect success, but I cannot obtain a firmware .img file from Kingnovel who do not provide it on the webpage at kingnovel.tv, also I got them in facebook messenger way over 24hrs ago he responded in 8 minutes when I was first writing and requesting the file, he said can you send me a picture of the back of the tv box so I did and since then all requests and pestering in messengerfalls on deaf ears and I had to resort to asking the ebay seller to contact him as well incase that helps.
In the mean time I can't get into recovery to wipe data factory reset it and really need a firmware .img if anyone can provide it please I would be more than hreatful.
Kingnovel have sent a working firmware for the box just need to fix the play store but so far so good and it is pre-rooted which is great.
PHYSC-1 said:
I have a kingnovel based tv box the kingnovel X10 MAX S905X3 model that is 4gb ddr3 ram and 32gb rom storage.
It will connecf to my pc and is seen in the Amlogic usb burning tool as connect success, but I cannot obtain a firmware .img file from Kingnovel who do not provide it on the webpage at kingnovel.tv, also I got them in facebook messenger way over 24hrs ago he responded in 8 minutes when I was first writing and requesting the file, he said can you send me a picture of the back of the tv box so I did and since then all requests and pestering in messengerfalls on deaf ears and I had to resort to asking the ebay seller to contact him as well incase that helps.
In the mean time I can't get into recovery to wipe data factory reset it and really need a firmware .img if anyone can provide it please I would be more than hreatful.
Kingnovel have sent a working firmware for the box just need to fix the play store but so far so good and it is pre-rooted which is great.
Click to expand...
Click to collapse
do you still have the file.. mine is broken too. and when using amlogic did u have to short anything or just plug usb in
Did Anyone ever get an image file ? I also have and R-tv box x10 max 8 k , can any one please help . Side question is there a way to back up the img after I customize and want to program multiple boxes . Maybe I'm dreaming but really need for android boxes and Menu tablets for restaurants .
Did anyone manage to get an image for the RK3318 version of this box? Looks like there are two versions and The link above is for Amlogic version.
hello
brother i need boot tv img file for beoutq reciver
There is a custom firmware
Hi dear friends,
thank you in advance for your help. I have a strange stuation (at least for me) with this box from Foyu x96 mini.As you can see in photo and also written on paper box , it has Amlogic S905W 4G 32G rom, but if i go inside Kodi for example in System it says it has Rockchip 3229... then also on recovery mode on boot mode it states "android recovery rockchip 322x ..... I've tried with Amlogic burning tool but it doesn't recognize the hub connection and it doesn't burn another rom for S905w. I've tried shortening nand pins..nothing
Have you got any suggestions to erase all and burn an Amlogic s905w Rom , considering there's an S905w cpu?? i don't think it's a false one! there's no Rockchip inside!
thank you
Isn'it strange? Any suggestions?
..seems i found the million dollar question.. the only post that puts in crisis all the forum...
ive seen amlogic devices recovery reporting as rockchip, its usally just a mismatched recovery, i would try and figure out mask rom mode for this board, see my video here for some info
aidanmacgregor said:
ive seen amlogic devices recovery reporting as rockchip, its usally just a mismatched recovery, i would try and figure out mask rom mode for this board, see my video here for some info
Click to expand...
Click to collapse
Thank you for your kind answer,but i tried also with mask mode,it only sound but no connection. For me it's a fake chip,otherwise why with rockchip tool it normally connects? Also on kodi it's incredibly slow,and in system maximum resolution is 1280*720!! Absurd
Hi , I have exactly the same problem with a tv box x96 mini locked in the logo screen. If you find a way to recover, please post it.
gherghe said:
Hi , I have exactly the same problem with a tv box x96 mini locked in the logo screen. If you find a way to recover, please post it.
Click to expand...
Click to collapse
I can't see if yours has amlogic s905w chip,anyway mine it's not locked,you can try with rockchip tool to burn image if you got Rockchip inside
yes I have a S905x chip, it doesn't look very good but I managed to take a picture.I tried with usb burninig tools but my box is not seen by the computer and I don't know how to use the nand method.
If your x96mini is not locked, you can help me with a stock firmware of your box, to try a rewrite of my box with the sd card method. Thanks anyway for the help. I have been looking for a solution to unlock the box for some time.
gherghe said:
If your x96mini is not locked, you can help me with a stock firmware of your box, to try a rewrite of my box with the sd card method. Thanks anyway for the help. I have been looking for a solution to unlock the box for some time.
Click to expand...
Click to collapse
Yours is s905w, seems same situation.. i haven't got original firmware,in my case mine is made by Foyu,you can try to find them on internet, i don't know.. don't know why they're recognized as Rockchip..
ok , thanks
cipposo said:
...i don't know.. don't know why they're recognized as Rockchip..
Click to expand...
Click to collapse
Maybe, because is it "faked" remarked RK3229 as S905W.
Try to setup mSD card with LibreELEC...
Release RK322x first mainline release · knaerzche/LibreELEC.tv
Kernel 5.5.0 uboot 202001 lima drm / mesa 20.0 (beta) hdmi up to 2160p hantro video hw decoding for MPEG2/VP8/H264 up to 1080p Wifi only for chipsets that have mainline support no preconfigured rc ...
github.com
mAtvXk said:
Maybe, because is it "faked" remarked RK3229 as S905W.
Try to setup mSD card with LibreELEC...
Release RK322x first mainline release · knaerzche/LibreELEC.tv
Kernel 5.5.0 uboot 202001 lima drm / mesa 20.0 (beta) hdmi up to 2160p hantro video hw decoding for MPEG2/VP8/H264 up to 1080p Wifi only for chipsets that have mainline support no preconfigured rc ...
github.com
Click to expand...
Click to collapse
Sure,probably it is,but with librelec would be only kodi...
Hello, thank you for your help. If I install the firmware from the link you sent me, can I then write another firmware? If I find the original firmware.
cipposo said:
Sure,probably it is,but with librelec would be only kodi...
Click to expand...
Click to collapse
Just to confirm if you have Rockchip inside, anyway LE is runned from SD card, nothing will be installed onto the box.
Ok thank you.
Hi, I tried LibreELEC but it doesn't work. I'm attaching the image with the received error, maybe you know what the problem is. Thanks
gherghe said:
Hi, I tried LibreELEC but it doesn't work. I'm attaching the image with the received error...
Click to expand...
Click to collapse
Did you create bootable media...
Create Media - LibreELEC.wiki
wiki.libreelec.tv
Yes I created a bootable sd card, with LibreELEC rk322x the box does not start, the LED remains off.
Well it look like you guys have a fake amlogic like me on the tag is 4GB RAM and 32GB flash store. All the inside chip has been marked like the real one but are fake. Main chip is RK3229 and the ram is just 1GB and 8GB flash. I successfully unbrick this **** using rkfactory tool and a rom for RK3229 chip. step to follow: 1. install rockcip drivers, 2. start factory tool, 3. load firmware in factory tool, 4. conect USB A - A cable to pc, 5. tooth pick in the AV port and pres the restore switch from inside, 6. connect USB A - A to the OTG USB port on the box the port is the one next to the tf card reader, 7, the hub is recognized by the pc and it be detected by the tool factory, 8. flash the firmware, enjoy.
Files:
1 Drivers: https://mega.nz/file/q8kk0ayA#XA3ZCoZK-Lu0LW1alqq6qKBmzFTj4gDDnlLWqq0Joso
2 factory tool: https://mega.nz/file/ihVnBC5L#Ri-IY7uVxcbaXEMkgb_bSXKMcwbkbAnYFxnEuizREaE
3 firmware: https://mega.nz/file/2k8EzJxY#cY_NWvIyof8Rnd7syOK9OYc5Fot19Ub76L46nzTrAAU