[KERNEL] [EAS] [Pie+] Eva Kernel | ProjektEva - Moto G5 ROMs, Kernels, Recoveries, & Other Develop

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ProjektEva presents Eva Kernel
Code:
**DISCLAIMER**
Flash this kernel at your own risk. Do not blame me if you did something
wrong whilst flashing this kernel. I will not accept any blame for MODs
that may have caused any instability to your device.
This is my personal Kernel project that I have been doing for the past few months, only to enhance the Overall Experience on Cedric!
Features of the kernel:
1. EAS:
Code:
* Energy Aware Scheduling
* Ainur DTS Eagle Sound Engine
* SchedUtil Governor by default
* And many more!
2. Non-EAS:
Code:
* Same as above just missing the EAS changes.
* Zen I/O Scheduler
* And many more!
Flash it on any Pie or Android 10 Rom!
NOTE:This kernel will not work with Stock rom (Because it is 64bit), It will not work with treble roms.
Downloads:
All my Downloads are available on the github releases on the kernel Source.
Download this Kernel Now!​
XDA:DevDB Information
Eva Kernel | ProjektEva, Kernel for the Moto G5
Contributors
m_vaisakh, SohamLad7, OmegaPrimus7
Source Code: https://github.com/mvaisakh/eva_kernel/
Kernel Special Features: Energy Aware Scheduling + Non-Energy Aware Scheduling
Version Information
Status: Stable
Current Stable Version: 1.2
Created 2019-12-14
Last Updated 2020-07-04

m_vaisakh said:
Vaisakh Murali:
Actually I've come to a decision, I feel like I should stop android development
It's just that for the past few days I've been away from android mostly, and it felt pretty good
I guess its time for me to be a user
Or a tester perhaps
I'm taking a break from android development, I'm really sorry to give you all hopes for Android 11 from my side. But I want to focus on my studies more. I spend too much time on android discussions and bug fixes
I hope you guys can understand
Click to expand...
Click to collapse
(from Telegram)
Tl;dr: No more updates for this./This is discontinued.

Eva EAS+ 2.0 Release
Changelog:
>Major CAF upstream (Over 400+ commits merged)
>MDSS upstream
>Tsens upstream (Better thermals)
>Some specific backports from android kernel common
Eva EAS+ 3.0 Release
Changelog:
>Compiled with Proton Clang 11
>Optimised a lot of code
>Better LMK
>Scheduling improvements
>Enabled Ultra Low Power Mode for all panels.
>Realtime scheduling when hotplugging.
// I recommend using AOSP with Eva Kernel and feel the smoothness of this kernel //
Downloads are available in OP (in my github releases)

Reserved

Great work

@m_vaisakh, good to have you back developing for the Cedric! Your past contributions were invaluable. I was particularly a huge fan of your Vanir ROM

rahimali said:
@m_vaisakh, good to have you back developing for the Cedric! Your past contributions were invaluable. I was particularly a huge fan of your Vanir ROM
Click to expand...
Click to collapse
Thanks, it means a lot!
But unfortunately, Vabir AOSP development stopped with nougat
Else I would have continued it!

Update available!
Eva EAS+ 2.0 Release
Changelog available in post #2 Downloads are available in OP (in my github releases)

I see that your kernel does not support Dualshock 4, could you possibly support it in the future.
https://github.com/mvaisakh/eva_kernel/blob/eva-rel/eas+2.0/3.18/drivers/input/joystick/xpad.c
---------- Post added at 04:11 PM ---------- Previous post was at 04:05 PM ----------
This is the official link for Dualshock 4 support in AOSP.
https://android.googlesource.com/pl...er/data/keyboards/Vendor_054c_Product_05c4.kl
You could also add on your Rom AOSP e Lineageos 17 ?. Thank you for your work.

Darkyuuki said:
I see that your kernel does not support Dualshock 4, could you possibly support it in the future.
https://github.com/mvaisakh/eva_kernel/blob/eva-rel/eas+2.0/3.18/drivers/input/joystick/xpad.c
---------- Post added at 04:11 PM ---------- Previous post was at 04:05 PM ----------
This is the official link for Dualshock 4 support in AOSP.
https://android.googlesource.com/pl...er/data/keyboards/Vendor_054c_Product_05c4.kl
You could also add on your Rom AOSP e Lineageos 17 ?. Thank you for your work.
Click to expand...
Click to collapse
Dual Shock support eh. But the link in kernel is an xbox joystick driver, you sure that they share common driver base?

m_vaisakh said:
Dual Shock support eh. But the link in kernel is an xbox joystick driver, you sure that they share common driver base?
Click to expand...
Click to collapse
This code and AOSP, I think it should be done on top of the Xbox drive, should just change the button codes, Android supports dualshock 4 since Android 9.
Sorry English, I'm using a translator, I only speak Portuguese Brazil
---------- Post added at 05:55 PM ---------- Previous post was at 05:51 PM ----------
m_vaisakh said:
Dual Shock support eh. But the link in kernel is an xbox joystick driver, you sure that they share common driver base?
Click to expand...
Click to collapse
And you're right, come understand now, what you meant, I'm sorry

Hey @m_vaisakh,
I want to try this but I like my kernel patch, has this modifications (from Lineage/AOSP kernel) in USB Code? (particulary drivers/usb/gadget/)
If not I could simply apply my patch on here and check it out

nift4 said:
Hey @m_vaisakh,
I want to try this but I like my kernel patch, has this modifications (from Lineage/AOSP kernel) in USB Code? (particulary drivers/usb/gadget/)
If not I could simply apply my patch on here and check it out
Click to expand...
Click to collapse
Try comparing it with the file you're committing changes to with the commited one (i.e., CodeZero's kernel on which you've applied).

m_vaisakh said:
Try comparing it with the file you're committing changes to with the commited one (i.e., CodeZero's kernel on which you've applied).
Click to expand...
Click to collapse
More than 1 file Min 6 files
---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------
Ah what means "And many more" :angel:

Update available!
Eva EAS v3.0 Release
Changelog:
*Compiled with Proton Clang 11
*Optimised a lot of code
*Better LMK
*Scheduling improvements
*Enabled Ultra Low Power Mode for all panels.
*Realtime scheduling when hotplugging.
Download from OP
Enjoy the weekend with Eva EAS+ 3.0!

m_vaisakh said:
Update available!
Eva EAS v3.0 Release
Changelog:
*Compiled with Proton Clang 11
*Optimised a lot of code
*Better LMK
*Scheduling improvements
*Enabled Ultra Low Power Mode for all panels.
*Realtime scheduling when hotplugging.
Download from OP
Enjoy the weekend with Eva EAS+ 3.0!
Click to expand...
Click to collapse
I put it in my phone few minutes ago. Thank you! I really apreciate your work!

is the kernel integrated with lineage 10 ROM?

eladiocesar said:
is the kernel integrated with lineage 10 ROM?
Click to expand...
Click to collapse
No

GCam improvements?
Does this kernel improve GCam compatibility? Because with custom ROMs the camera is fatal and it is one of the things I use the most, thanks in advance.
I await a prompt response, regards.

NTBBloodbath said:
Does this kernel improve GCam compatibility? Because with custom ROMs the camera is fatal and it is one of the things I use the most, thanks in advance.
I await a prompt response, regards.
Click to expand...
Click to collapse
No, camera can't be fixed. Use Stock.

nift4 said:
No, camera can't be fixed. Use Stock.
Click to expand...
Click to collapse
Oh, and what is that for?
However, I'll try it, thanks for replying!

Related

[ROM][5.1.1_r18][RRO Layers] XenonHD [03/25/2016]

Team Horizon presents
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XenonHD is a custom firmware aka ROM for various Android devices. It is built from Android Open Source Project (AOSP) with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Base : Lollipop 5.1.1_r18 : FULL AOSP BASE FROM SOURCE.
It's Rockstable,Blazing fast.
and now Buttery Smooth too!
Download in post #2
Changelog in post #3
Screen shots in post #4
WHAT IS RRO?
Furrydaus said:
Many of you may be new to RRO so let's give you a brief overview of what it is.
On the surface, RRO seems to be like your standard themer you'll find from any rom especially in CyanogenMod.
RRO is a new kid in the block and isn't as sophisticated as the CM Theme Engine but it is indefinitely more efficient and more customizable (More on that later).
Have you somehow liked the way the Sony Theme Engine worked? It was indeed a project from the RRO Interface but with Sony's own tweaks. If you are able to guess, the Sony Theme Engine has its flaws and shares some of the same fate as the RRO Theming Engine.
Ever since the rise of CyanogenMod, Google and its affliates seem to have responded to the call for more customizabilty by Improving the Original RRO Engine and then officially releasing it as part of AOSP in the Lollipop Releases although it can still be found in some form or another in the earlier versions of Android.
Now since the new RRO Engine was released, it turned out to be the very thing that the CM Theme Engine feared, a worthy competitor. Unlike RRO, the CM Theme Engine uses loads (and I really mean LOADS) of code in implementing it. Patching it again and again, the CM Theme Engine seem to be reluctant to absorb into the possibilities of RRO trying to stay away from the Google Way.
Unlike the CM Theme Engine, RRO uses and accesses the resources of the whole OS and opens it up for the user to customize and utilize. Right now, it seems very difficult to get a hold of but once you get started in using it, you'll realize how much potential RRO can do for you.
The downside of RRO is that unlike the CM Theme Engine, it is very difficult to ensure that things run smoothly. Some newbie developers may publish RRO Themes to the play store and may have missing resources. (I'm sure the inexperienced developer pool will reduce if given time and leniency)
Like @miki.cis has shown, some themes can cause crashes to the system including the Reboot Menu due to missing resources. When there's a missing resource, the system is stuck and takes the easy way out by rebooting. (I can see this being remedied in the future though).
So as a result, RRO Layers is a dragon that can be tamed if properly utilized and given the time to mature. I hope those who are trying RRO for the first time be lenient to the new RRO Layers Engine and its new generation of Themers.
Regards,
Furrydaus
Click to expand...
Click to collapse
Thanks to:
AOSP
Cyanogenmod
enricocid (Boot animation)
SlimRoms
Flar2
Faux
And Especially for @Furrydaus, @Adrian DC and @darjwx, this ROM can't be built without their help :good:
Source:
GitHub​
XDA:DevDB Information
XenonHD 5.1, ROM for the Sony Xperia SP
Contributors
dic1911
Source Code: https://github.com/TeamHorizon
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Stable Release Date: 2016-03-25
Created 2016-03-25
Last Updated 2016-03-25
Downloads
Download Link : AndroidFileHost
Gapps(I actually recommand you to use microG, the FLOSS gapps replacement, here's the thread for it LINK):
http://opengapps.org/
Donate by buying one of these apps from Play Store:
https://play.google.com/store/apps/d...d=Team+Horizon
Clean wipe is recommended!!
If you're coming from CM ROM, WIPE /data is a must! or it won't boot!
(wipe without internal sd, you know it )
Official XenonHD site:
http://www.xenonhd.com/
XenonHD Settings backup tool:
https://play.google.com/store/apps/d...om.xehd.backup
Please read this before asking dumb questions again and again:
http://forum.xda-developers.com/showthread.php?t=2075368
Like my(XenonHD) Facebook page:
http://goo.gl/aUaJh
Join our community on Google+:
https://plus.google.com/communities/...22179967248992
ChangeLog
03/25/2016: Initial Build
Screenshots
does this build have the gestures and the high touch sensitivity working ? :silly:
if not then u should ask adrian or dario for help ...since adrian fixed it on aosp ROMs
p.s: good to see more users learning to build ROMs ...best of luck !
p.s2: @Furrydaus i am patient + i sold my xsp so there is nothing for me from asking that...i'm just making a heads up that there is a recent fix for those things
flash- said:
does this build have the gestures and the high touch sensitivity working ? :silly:
if not then u should ask adrian or dario for help ...since adrian fixed it on aosp ROMs
p.s: good to see more users learning to build ROMs ...best of luck !
Click to expand...
Click to collapse
no gestures here, and Glove Mode was removed due to build errors, I'm now trying rebuild with glove mode now
about gestures, I have no idea how to do it, if there're users demand the function, I'll ask Adrian DC for instruction
flash- said:
does this build have the gestures and the high touch sensitivity working ? :silly:
if not then u should ask adrian or dario for help ...since adrian fixed it on aosp ROMs
p.s: good to see more users learning to build ROMs ...best of luck !
Click to expand...
Click to collapse
Yeap were guiding him through that now. Be patient while we train our new Developer member
NO BUGS IN THIS ROM..........PLEASE ANSWER ME
Shubham Shah said:
NO BUGS IN THIS ROM..........PLEASE ANSWER ME
Click to expand...
Click to collapse
no, u shall not ask bug here lol, and I'll turn on the n00b protection for this thread cuz of u, so that u got the time to search instead of asking useless questions
just kidding, try to learn something by yourself before ask, it's more effective
Is this totally different from the other xenon hd roms???
R3XER said:
Is this totally different from the other xenon hd roms???
Click to expand...
Click to collapse
There was only 1 XenonHD build before....
Not different, Built with Updated Kernel and Device Sources which is a Long Bump to Performance and Optimizations for this ROM
Arvind7352 said:
There was only 1 XenonHD build before....
Not different, Built with Updated Kernel and Device Sources which is a Long Bump to Performance and Optimizations for this ROM
Click to expand...
Click to collapse
Thanks will download and test soon. Any known bugs so far.?
R3XER said:
Thanks will download and test soon. Any known bugs so far.?
Click to expand...
Click to collapse
nope, except for keyboard sometimes disappears due to the poor memory management of android 5.1.1_r18
anyway, I'll build MM ver. of XenonHD after device source get update :good:
Camera on cm 13 is fixed. Hope to see a stable cm 13 soon. I will then download MM version. Will try LP one too.:thumbup:
Sent from my Xperia SP using XDA Free mobile app
http://forum.xda-developers.com/xperia-sp/development/rom-huashan-xenonhd-5-1-1r8-rro-layers-t3167106
what is the difference?
ikoti said:
http://forum.xda-developers.com/xperia-sp/development/rom-huashan-xenonhd-5-1-1r8-rro-layers-t3167106
what is the difference?
Click to expand...
Click to collapse
That is an Old Thread
And, This is a New Thread
That has an Old Build (Removed)
And, This has the Updated Build
ikoti said:
http://forum.xda-developers.com/xperia-sp/development/rom-huashan-xenonhd-5-1-1r8-rro-layers-t3167106
what is the difference?
Click to expand...
Click to collapse
this is the thread for build with updated device sources, try READ the thread next time, i've wrote it at the ANNOUNCEMENT
Arvind7352 said:
That is an Old Thread
And, This is a New Thread
That has an Old Build (Removed)
And, This has the Updated Build
Click to expand...
Click to collapse
thanks for keep answering such n00b questions for me lol :highfive::good:
dic1911 said:
try READ the thread next time:
Click to expand...
Click to collapse
sorry, my bad)
---------- Post added at 01:09 PM ---------- Previous post was at 01:02 PM ----------
this mod will work without errors in this firmware?
http://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-xperia-z4-framework-sony-stock-t3154772
on Resurrection Remix to 5.1.1 I have had problems with it.
shutdown with error when focusing on a human face in Superior Auto.
ikoti said:
sorry, my bad)
---------- Post added at 01:09 PM ---------- Previous post was at 01:02 PM ----------
this mod will work without errors in this firmware?
http://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-xperia-z4-framework-sony-stock-t3154772
on Resurrection Remix to 5.1.1 I have had problems with it.
shutdown with error when focusing on a human face in Superior Auto.
Click to expand...
Click to collapse
most of mods like this won't work as the sources are updating quickly(so the mod is outdated), if you want to use the mod, see the date when it's made, and find a rom which was built on nearby date, or just try it after you have a working nandroid backup, good luck anyways
edit: btw, don't report here if don't work, it's expected
Looks really great this Rom.
It's fast. Smooth. No lags until now.
Congrats and thanks for the work.

[Kernel][G900F][TW6.0.1][Linux 3.4.0][02/12/16] PhoeniX Reborn Kernel V1.0 MM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello flashers!
I am proud to present you my latest work.
PhoeniX Reborn Kernel for Galaxy S5 G900F.
​
Users Pay Attention!
This kernel was built for:
- Galaxy S5 G900F
- Touchwiz 6.0.1
Do not use it on other devices because it might brick your device!
I take no responsibility for any damaged that might have been caused by using this kernel.​
Click to expand...
Click to collapse
Overview:
PhoeniX Kernel was officialy introduced in PhoeniX ROM for Galaxy Note II.
Since then, PhoeniX Kernel was implemented in all PhoenIX ROMs.
So.. why do you release a new kernel? What is the difference between PhoeniX Kernel to PhoeniX Reborn kernel?
Well, there are many changes between linux 3.4.113 to the modified 3.4.0. I believe some user want stock experience as Samsung intended to.
So PhoeniX Reborn kernel is actually a stock base kernel with some tweaks and features.
Click to expand...
Click to collapse
PhoeniX Kernel V1 features:
- Built from Samsung Marshmallow Kernel Source Update XXS1CPK1 for G900F
- Built with Google's arm-androideabi-4.9 compiler
- Linux 3.4.0
- SELinux set to permissive in source code
- ExFat Support
- Samsung MM Official XXS1CPK1 Ramdisk
- init.d support
- Added Improved Fast Charge Support - Huge thanks to Faux123! You can control it via Trickster Mod app
- Fixed SELinux Memory Leak
- Enabled NTFS support- thank you andip71
- Enable USB OTG Ethernet support - thank you andip71
- Added Faux Sound Control - thanks to faux123 & ktoonsez
- Kernel Compression: LZO
- Increased entropy levels (both read and write)
- Disable restrict ROOT
- Double min-max Read Ahead
- disable crc to improve performance [andip71]
- No more "Kernel is not SEANDROID" warning at boot - huge thanks to kykint
- Added Network Speed Tweak
- Added frandom
- SELinux: revert Samsung hard enforcing
- Enabled Screen wake and sleep functions - special thanks to andip71 and ktoonsez
- Added Color control to adjust RGB color space + inverted mode - special thanks to andip71
- TCP Congestion changed to Westwood
- Added some kernel tweaks
Click to expand...
Click to collapse
Additional Notes:
This kernel was built to match PhoeniX ROM goals. Therefore, I am not going to include the following:
- Things I don't like.
- Things that can risk devices and are dangerous(Such as OC...).
- Experimental things.
- Gaming modules that are not included by Samsung(I am not a gamer, so I don't really care..)
- F2FS - causes compatibility issues and there is no need for that.
Flash at your own risk. I take no responsibility for any damaged that might have been caused by using this kernel.
I don't really care about benchmark results. Most stock kernels should have between 50K to 55K without OC. The most important thing is how you feel with this kernel. I can give you a patch that can get score of 120K but what is the point if the kernel has lags
Flash only on Touchwiz 6.0.1 ROMs.
Click to expand...
Click to collapse
Downloads:
V1.0:
androidfilehost: Click Here!
d-h.st: Click Here!
MD5:
Code:
d8bfbcd27a75a694cddffdb75d5ac53f
Old versions:
Click to expand...
Click to collapse
Report a bug:
If you wish to report a bug,
Do it only in this thread or in this link:
http://tdroms.com/index.php/contact-us
- If you just want to share something, follow me/this rom, talk with me, you have alot of options
1. Write in this thread
2. Write here: http://tdroms.com/index.php/contact-us
3. Write on our facebook/twitter.
Click to expand...
Click to collapse
Donation:
If you like my rom and work, please consider a donation:
http://tdroms.com/index.php/donation
If you can't donate or just don't want it is ok! but please make the following:
Rate this thread 5 stars
Click thank to my posts
Click to expand...
Click to collapse
Source code:
GitHub: Click here
Click to expand...
Click to collapse
Credits:
Tkkg1994
andip71
Faux123
GuneetAtwal
Yank555.lu
ktoonsez
kykint
If I've forgotten someone, please PM me.
Click to expand...
Click to collapse
XDA:DevDB Information
PhoeniX Reborn Kernel , Kernel for the Samsung Galaxy S5
Contributors
tamirda
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2016-12-02
Created 2016-12-02
Last Updated 2016-12-02
Reserved
Change log:
V1.0:
Initial Release
Click to expand...
Click to collapse
Reserved
Thanks keep the good work
S5 sm-g900f
I already have Phoenix ROM v14.2 and of course Phoenix Kernel v12.0 in my S5. Should I flash this Reborn Kernel?
Thank you.
Old and new phoenix kernel version are always conflict with my g900p but this reborn kernel works like a charm :laugh:
I don't know why but thanks for great work and sorry for my english too :fingers-crossed:
G900i
Working perfectly on my Australian G900i with PhoeniX Rom v15.
Thanks Tamirda you've kept my old S5 going for a while longer :good:
---------- Post added at 13:04 ---------- Previous post was at 12:55 ----------
S0hn1sh said:
I already have Phoenix ROM v14.2 and of course Phoenix Kernel v12.0 in my S5. Should I flash this Reborn Kernel?
Click to expand...
Click to collapse
The Phoenix Reborn kernel v1 is more stock than the Phoenix kernel v13.
Try comparing the changelogs and decide for yourself
@tamirda
thx for new work.
added faux sound control, you wrote....
which app should be used to?... faux sound app last update 2014
---------- Post added at 08:45 PM ---------- Previous post was at 08:12 PM ----------
so far so good....
wifi passwords (and saved wlans) after restart or disabling wifi are gone.
always must put in new then
Best kerney ever. Fog SnapDragon am using this with phoenix 15 its amazing
diddsen said:
so far so good....
wifi passwords (and saved wlans) after restart or disabling wifi are gone.
always must put in new then
Click to expand...
Click to collapse
so, nobody has this problem?
i tested with cpk3 alexandr rom.
diddsen said:
so, nobody has this problem?
i tested with cpk3 alexandr rom.
Click to expand...
Click to collapse
I'm on no limits and i have no problem.
Loving this build, don't stop!
---------- Post added at 11:07 AM ---------- Previous post was at 11:04 AM ----------
diddsen said:
so, nobody has this problem?
i tested with cpk3 alexandr rom.
Click to expand...
Click to collapse
I had to throw mine back in, quick fix but not ideal since I do daily data swap, Titanium restores seemed pointless also, a workaround would kick ass
CrysiZ said:
I'm on no limits and i have no problem.
Click to expand...
Click to collapse
strange.
i was on xxx but i thougt better to switch to alexndr since xxx said no longer ssupports (end of life).
i know he has made 5.8 cpk3 but he will do only as long not much to do, no grater changes to work on his mods in rom.
Im on xXx no limits rom 5.8a. Super stable. No issues at all. Thanks tamirda. This is the most stable kernel you have made. ?
Sent from my SM-G900F using Tapatalk
When i took a picture with flash my phone restart. I will try V 13 or Boefla
Sorry for this noob question but how I can acces settings (app ?)
Hello to everyone.. Every time I flashed this kernel I faced the same problem, I lost my root privileged!! It's normal to happened this?
adamaris1990 said:
Hello to everyone.. Every time I flashed this kernel I faced the same problem, I lost my root privileged!! It's normal to happened this?
Click to expand...
Click to collapse
For me doesn't happen just flash latest super su throw recovery and you be fine again
NecromantiA said:
For me doesn't happen just flash latest super su throw recovery and you be fine again
Click to expand...
Click to collapse
I gave this a try, no success. After kernel installation I lost root, then I tried to flash SU 2.79sr1, but got some failure message in twrp while patching boot image, and at next reboot SU was not yet working.

[KERNEL][AOSP][AnyKernel][LOS-16.0+EAS] Gamma Kernel for [All Lineage Variants]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DESCRIPTION
Hey guys, I have started a custom Kernel based on LineageOS sources with 98% CAF. So I would like to share my own performance and usability improvements with minimal feature and enhancements on top. The intention is to have a minimal light-weight kernel that is very fine tuned for the device.
FEATURES
Minimal Kernel with a stripped defconfig base to be more streamlined and have less memory footprint
User space display color calibration (KCAL) with screen calibrated against iPhone 8 Plus, also helps reducing screen retention
Schedutil governor making use of EAS features with updates from Linux 4.4 and 4.12
Up to date with LineageOS sources for maximum compatibility and security bugfixes
Memory and cache subsystem optimizations, you will feel it
Adaptive LMK enabled by default
Transparent Hugepages are enabled
ZRAM/Swap partition is disabled by default
BFQ IO scheduler set by default to avoid slow-downs on task intensive scenarios
No overclocking was chosen to avoid unnecessary heat, optimizations were focused on other different areas
Kernel Samepage Sharing enabled with deferred timer by default to gain some memory usage optimizations, the process sleeps on regular basis and I've profiled it so that there's no battery drains due to it
Simple temperature controls for msm_thermals exposed
Compiled with GCC 6.x optimized toolchain and -O3 plus other hardware specific flags
Undervolted the Adreno 530 GPU voltage rail to keep things cooler
CAF Rebase on major portions of the Kernel has helped lower the memory footprint a lot
ES9218 Quad DAC automatic toggling working inside the kernel for headphone HIFI playback, please read here for details
DOWNLOADS
AnyKernel: Click Here (Or check top of the post, download tab)
(Recommended) Stock Tasha XML Audio Mixer FIles : Click Here
(Recommended) Stock Thermal Engine with Tweaked Values Flashable : Click Here
SOURCE
V20-Kernel-Gamma GitHub Source
NOTES
Here is a GeekbenchV4 result example : http://browser.geekbench.com/v4/cpu/10667886
KNOWN BUGS
Two second delay between plugging charger and detecting it.
I would also like to thanks to various people who contribute tremendously such as:
@x86cpu
@EvilHowl
@USA-RedDragon
@savoca
@albinoman887
@emdroidle
@Rashed97
@joshuous
@RenderBroken
and many others!
<< If you like my work here is my hat, please donate! >>​
​
XDA:DevDB Information
Gamma Kernel, Kernel for the LG V20
Contributors
Omar-Avelar
Source Code: https://github.com/oxavelar/V20-Kernel-Gamma
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: 9.0.0
Stable Release Date: 2019-09-21
Created 2019-06-16
Last Updated 2019-09-21
CHANGELOG
9.0.0 - Increased responsiveness by adjusting input boost and stune values. Updated the thermal mod values again, revert LA.UM.6.5.r1-11700-8x96.0 to fix green tint crashes and updated to AnyKernel3.
8.0.0 - Merging LA.UM.6.5.r1-11700-8x96.0.
7.0.0 - Update SDCARDFS driver. And updated the thermal mod values to account for GPU undervolt.
5.0.1 - Re-enabled -O3 optimizations and increased little cores boost.
5.0.0 - Compiled with Linaro GCC 8.3.
3.2.0 - Biased a little towards better performance and keeping power consumption almost intact.
3.0.0 - Working camera with Lineage OS 16.0, and extended screen with notch enabled.
Damn we missed u omar! Thanks for this!
Second screen!?
Omar-Avelar said:
CHANGELOG
3.0.0 - Working camera with Lineage OS 16.0, and extended screen with notch enabled.
Click to expand...
Click to collapse
H918: installed all 3 recommended zip files. Definitely a great improvement. Much cooler phone. Been waiting for this one Omar. Thank you.
Thank you for your amazing work @Omar-Avelar keep up the good work!A suggestion tho,wouldn't be better to switch on a newer GCC version i think it would be a help to you work as 9.1 which is the latest one has many improvements over the previews versions.
All is well.
VS995 Bugs
Thank you so much for this awesome kernel, makes the V20 usable ? Only bugs I'm seeing are no flashlight and camera.
Update: They both work now! Not sure what I did but I'm glad I did it lol
any way to use this on an F800L V20?
It's running the US996DS version of LOS16 perfectly, but Gamma Kernel cannot be installed as-is
did do.devicecheck=0, worked
How is everyone getting the camera to work? Nothings detecting it on my US996-DS...
Edit: [NVM I'm retarded]
Unfortunately, it made my phone even laggier, scrolling was laggier and everything felt worse, I even did a clean install of LOS 16 and it was the same, I don't know if I installed it wrong, I installed the ROM, then gapps, then the kernel and the add ons, and finally magisk. Is there anything I can do to fix this issue?
Nachitoo said:
Unfortunately, it made my phone even laggier, scrolling was laggier and everything felt worse, I even did a clean install of LOS 16 and it was the same, I don't know if I installed it wrong, I installed the ROM, then gapps, then the kernel and the add ons, and finally magisk. Is there anything I can do to fix this issue?
Click to expand...
Click to collapse
No offense but you should try go to nougat stock and do the dirty santa process all over again.
karkand said:
No offense but you should try go to nougat stock and do the dirty santa process all over again.
Click to expand...
Click to collapse
I have a H918 a T-Mobile variant though.
---------- Post added at 06:21 AM ---------- Previous post was at 06:21 AM ----------
karkand said:
No offense but you should try go to nougat stock and do the dirty santa process all over again.
Click to expand...
Click to collapse
I went back to Lineage 15.1, and it was faster again.
The phone touch becomes unresponsive at times many users have reported that on LOS 16 i thought posting it here as possibly is kernel related as with stock lineage never had this issue even on the latest build.Again thanks for your work!
Will any kernel work correctly on V20 F800L?
So I just flashed the most recent version onto my 710 running rr and now my display extends up into my second display except theres a notch where the camera is. Is this supposed to be a feature or have I done something wrong? Am I missing something?
---------- Post added at 08:54 PM ---------- Previous post was at 08:50 PM ----------
Also those who said their camera and flashlight weren't working, what did you do to fix?
Figured it out. I was flashing gamma for the wrong Los version. It's hard to tell when you're on a rom that doesn't state who their base version is. My bad guys
There are v3.2 and v4.0 in download, what's different?
ryo2456 said:
There are v3.2 and v4.0 in download, what's different?
Click to expand...
Click to collapse
same question here.
Exists a changelog?
avilav said:
same question here.
Exists a changelog?
Click to expand...
Click to collapse
He will add tho he must have done the builds in a hurry and released them for us I'm on v4 what I see is that phone doesn't become unresponsive anymore
Running lineage-16.0-20190625-X86CPU-h910.zip with the latest OpenGApps and v4 plus all the recommendeds from the OP.
I have Bluetooth connection issues with my car stereo/hands free.
What can I provide to help troubleshoot?
* I will be reflashing with the same config minus the v4 kernel just to be sure that's the issue.
Sent from my LG-h910 using Tapatalk

[ROM][CFW][10][begonia] Pixel Experience [OFFICIAL][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for DeviceName [begonia]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Lights
Sound / vibration
Known issues
64 MP Mode Dosen't Work (Temp Fix: Flash ANX Camera Module)
HOW TO FLASH PE
Guide
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog​
Build author/Device Maintainer: ZIDAN44
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
​
XDA:DevDB Information
Pixel Experience For The Redmi Note 8 Pro
Contributors
ZIDAN44, Agent_fabulous
ROM OS Version: Android 10
Version Information
Status: Stable
Created 2020-03-01
Last Updated 2020-04-08
NOTE: Vendor is included on CFW enabled builds! All builds From Now Are CFW!
Kernel Source: begonia
Device Source: PixelExperience-Devices
A HUGE thanks to everyone who believed and helped test my builds! This would have been impossible without them. Here's them in no particular order
- Agent_fabulous (Lead Dev)
- Sagar Sorathiya (absolute madlad tester)
- Sahil Sonar
- Zinadin Zidan
- Juan
- Mashopy
- Shanike
- Martin
- THEMAXIMUMPOWER
And anyone else I missed!
Also, huge thanks to @TheImpulson and @dev_harsh1998 for helping and contributing to begonia!
Reserved
Why is the second post the exact copy of the one in the POSP thread?
CzokoPL said:
Why is the second post the exact copy of the one in the POSP thread?
Click to expand...
Click to collapse
Because every rom released for this phone so far are collective efforts by more or less same set of developers and testers.
But still, "What works" section in the second post is contradictory to the same section in the first post.
Fix your post, it's misleading.
Pixel + Stock = PixelExperience
---------- Post added at 03:32 PM ---------- Previous post was at 03:12 PM ----------
czokopl said:
but still, "what works" section in the second post is contradictory to the same section in the first post.
Click to expand...
Click to collapse
if u dont want to appreciate what the devs did then dont use their work
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
HidekiRyuga said:
Fix your post, it's misleading.
Click to expand...
Click to collapse
My friend, your comment is misleading, the devs spent hours and days porting roms for this ****y MTK, you must appreciate their work
CzokoPL said:
But still, "What works" section in the second post is contradictory to the same section in the first post.
Click to expand...
Click to collapse
What do you mean? The same bug?
---------- Post added at 11:40 PM ---------- Previous post was at 11:39 PM ----------
Fourth Custom ROM in 1 week. Feels good. Nice movement. Keep going. I hope soon will be fixed. And of course for Global or other vendor too. Because some user need this NFC. But, good step.
THE MAXIMUM POWER said:
if u dont want to appreciate what the devs did then dont use their work
Click to expand...
Click to collapse
Right now you're misinterpreting what I said. I really do appreciate all the work devs put in just to get these ROMs out. In my post I was just pointing out that there were inconsistencies between post #1 and #2.
ZIDAN44 said:
PixelExperience for DeviceName [begonia]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Known issues
Many Maybe
HOW TO FLASH PE
Guide
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Build author/Device Maintainer:ZIDAN44
Device Source code:https://github.com/PixelExperience-Devices
Source code:https://github.com/PixelExperience
ROM Developer:jhenrique09​
XDA:DevDB Information
Pixel Experience For The Redmi Note 8 Pro
Contributors
ZIDAN44, Agent_fabulous
ROM OS Version: Android 10
Version Information
Status: Test
XDA:DevDB Information
Pixel Experience, ROM for the Redmi Note 8 Pro
Contributors
ZIDAN44
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2020-03-01
Last Updated 2020-03-01
Click to expand...
Click to collapse
Bro, what vendor's image was taken from ROM? India? and whether nfc really doesn't work, the thing is I already installed and nfc doesn't work.
Kelisu said:
Bro, what vendor's image was taken from ROM? India? and whether nfc really doesn't work, the thing is I already installed and nfc doesn't work.
Click to expand...
Click to collapse
The required vendor is india and nfc is already a know issue ;___;
Mashopy said:
The required vendor is india and nfc is already a know issue ;___;
Click to expand...
Click to collapse
Thank you bro...
Has problem with flickering blue light filter
Call volume too high, does not allow me to reduce the volume, any solution?
uyo_kun said:
Has problem with flickering blue light filter
Click to expand...
Click to collapse
Just disable HW Overlays in Developer Options.
ROM installed, finally.
Still trying to learn the gestures, but awesome work @ZIDAN44 !!!
Thanks a lot!
carpediemrf said:
Call volume too high, does not allow me to reduce the volume, any solution?
Click to expand...
Click to collapse
Are you idiot or what? Every rom threat the same post, very annoying.
antony.ps said:
ROM installed, finally.
Still trying to learn the gestures, but awesome work @ZIDAN44 !!!
Thanks a lot!
Click to expand...
Click to collapse
xD
Is there a chance that NFC will be working in the near future. NFC seems to be a general problem on xiaomi running on custom rooms whether it's snap or mtk.

[ROM][UNOFFICIAL][S20,S20U][120hz] - LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github Repo
Instructions:
TWRP or LineageOS Recovery
Make sure you flash any stock OneUI 2.1 ROM. This is mandatory otherwise several errors are expected.
Download your phone build. S20 - x1q, S20U - z3q
In TWRP wipe data and flash the ROM
Additionally you might flash OpenGapps
What's working:
Wifi
Camera
Audio
Bluetooth
NFC
FingerPrint
High Refresh Rate (120hz)
GPS
Video Playback
RIL
Known issues:
You tell me
Downloads:
You can find the downloads in the folder below:
ANDROIDFILEHOST
Thanks to:
@chongodroid for testing the changes for x1q and building for s20.
@jesec for all of his work. The ROM is based completely off Jese's trees and kernels with modifications made to force it run in [email protected] Go ahead and thank him, donate to him because none of this would have been possible without his work.
Source code:
Device Trees:
x1q - https://github.com/ChongoDroid/android_device_samsung_x1q
z3q - https://github.com/Jimbo77/android_device_samsung_z3q
Samsung Common - https://github.com/Jimbo77/android_device_samsung_sm8250-common
Kernel:
Kernel - https://github.com/Jimbo77/android_kernel_samsung_sm8250
Base:
LineageOS - https://github.com/LineageOS
Donations are not required but are encouraging, If want to support my work just click HERE
XDA:DevDB Information
[ROM][UNOFFICIAL][S20,S20U][120hz] - LineageOS 17.1, ROM for the Samsung Galaxy S20
Contributors
jimbo77, chongodroid, jesec
Source Code: https://github.com/Jimbo77/android_kernel_samsung_sm8250
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Samsung UI 2.1 Vendor
Based On: LineageOS
Version Information
Status: Beta
Created 2020-11-09
Last Updated 2020-11-09
Reserved
If you also want to run LOS with a Custom Kernel, you may also install the Custom Kernel below:
JimboK-LOS KERNEL
Features:
Several EAS commits for balancing power+efficiency
Fsync On/Off Toggle
Dynamic Sync Control
SLIMBUS OC to improve the Audio Mods
BBR2 TCP Congestion algorithm by Default
Added IO-SCHED drivers like: ZEN, FIOPS, MAPLE etc...
KLAPSE Driver (check out https://forum.xda-developers.com/and...odule-t3907025)
KCAL Color Control Driver (Up to date)
Boeffla Wakelock Blocker Driver
Adreno Boost
Enabled a few drivers inside of Kernel: CDC, NTFS, CIFS and some native gaming devices as well
Added and Enabled HID: NINTENDO SWITCH controllers support
Enabled ZSTD Compression, it is recommended to enable this for ZRAM moving forward
Disabled LZO, updated LZ4 compression algorithms
Several Upstreams to NET/TCP in order to improve Network Connectivity and Speed.
Added a fix to hide Magisk Mount for Isolated Processes. This is a critical leak in MagiskHide that can be exploited by apps trying to determine if the device is rooted. I had an issue with two payment apps that after applying this fix, they work. Not sure if they were finding magisk with this method lol. Read more here https://darvincitech.wordpress.com/2...g-magisk-hide/
Reserved
Let's goooooooooooooo!!!
Will you support s20+ in the future?
Finally able to color calibrate the s20 screen. It's crazy how bad the stock colors are.. like I can't even go back realistically lol
keaheng said:
Will you support s20+ in the future?
Click to expand...
Click to collapse
Yes we just need a tester. Neither @ChongoDroid or I own a S20+ so the support in kernel is there but need testers
It should work though on s20+, I wonder if FHD density is the same as ultra. Also finger print placement might need testing.
jimbo77 said:
Yes we just need a tester. Neither @ChongoDroid or I own a S20+ so the support in kernel is there but need testers
Click to expand...
Click to collapse
I own the s20+ G986U1. I think i can help.
---------- Post added at 10:24 AM ---------- Previous post was at 10:23 AM ----------
ChongoDroid said:
It should work though on s20+, I wonder if FHD density is the same as ultra. Also finger print placement might need testing.
Click to expand...
Click to collapse
You mean i can try the ultra version on my plus?
keaheng said:
I own the s20+ G986U1. I think i can help.
---------- Post added at 10:24 AM ---------- Previous post was at 10:23 AM ----------
You mean i can try the ultra version on my plus?
Click to expand...
Click to collapse
No no, I mean you could build lineage with our code for S20+ and it'd flash and work fine.
We've only been building for our devices but the trees from lineage have support for S20+.
We'll think about it, maybe I'll build an alpha build for S20+ and see if how it is.
keaheng said:
I own the s20+ G986U1. I think i can help.
---------- Post added at 10:24 AM ---------- Previous post was at 10:23 AM ----------
You mean i can try the ultra version on my plus?
Click to expand...
Click to collapse
No. That's not gonna work, it won't boot. What he says is we can build with the same parameters since we are forcing [email protected] the resolution and assets need to be adjusted.
Jesse's trees are configured to build at [email protected] so we need yo move stuff around to make it work at FHD+
The way gesture navigation is supposed to be.
ChongoDroid said:
No no, I mean you could build lineage with our code for S20+ and it'd flash and work fine.
We've only been building for our devices but the trees from lineage have support for S20+.
We'll think about it, maybe I'll build an alpha build for S20+ and see if how it is.
Click to expand...
Click to collapse
Yes please.
Nice, what base needed?, samsung latest?
NisseGurra said:
Nice, what base needed?, samsung latest?
Click to expand...
Click to collapse
No. Previous OneUI 2.1 vendor is needed. I believe all ROMS with AXXX are 2.1 (July and prior). One UI 2.5 vendor will not fully work and those begin with BXXX I believe.
NisseGurra said:
Nice, what base needed?, samsung latest?
Click to expand...
Click to collapse
No. Previous OneUI 2.1 vendor is needed. I believe all ROMS with AXXX are 2.1 (July and prior). One UI 2.5 vendor will not fully work and those begin with BXXX I believe.
Yeah anything prior to 06 month was One UI 2.1
Lineage on G9810 with ATFD base: runs pretty much perfect, impressive work!
NisseGurra said:
Lineage on G9810 with ATFD base: runs pretty much perfect, impressive work!
Click to expand...
Click to collapse
Just wait for 120hz to kick in!
It's pure butter.
---------- Post added at 07:11 PM ---------- Previous post was at 07:10 PM ----------
Now on Telegram!
https://t.me/joinchat/MfdPcBxQIO6B2-3hmg5HpA
Gcam supported too, nice

Categories

Resources