[Update]
Solved the issue
1. Go to this link 4pda . ru/forum/index.php?showtopic=399304&st=600#Spoil-55136455-3
(Of course without spaces)
Or just search on google for "4pda forum" then in the forum search for mdz 22 ab
2. You will find a tread with someone holding a mi box in hand. Enter and read the instructions, translate it because it is in russian.
3. Download usb tool and rom
4. Open box back plastic cover, inside you will see a metal cover. Remove it carefully with a tweezer. Careful not to scratch the board.
5. Install usb tool with drivers, unzip rom. Open usb tool, load rom, insert usb male in box and the other male in pc.
6. This is the tricky part. Click start, shortcircut with the tweezers the test point and the metal frame and PLUG IT
7.If done correctly it should recognize and start download.
8. If it gives an error, repeat, uninstall usb drivers, reinstall, retry. Mine worked after 20 attempts. You need patience.
THANK YOU VLADIMIR UHLIR FOR THE INSTRUCTIONS!
Hello, sometime ago I did a pretty stupid thing with an usb stick and wrote on my mdz-22-ab firmware for mdz-19... something..
Long story short is bricked.. only a red light in the back of the box, no signal to hdmi.. nothing else
Can you, please, be so kind and tell me if it is any way to unbrick it?
Thank you so much for your patience!
It seems not a lot of people made stupid mistakes like me!
mikescorei said:
Hello, sometime ago I did a pretty stupid thing with an usb stick and wrote on my mdz-22-ab firmware for mdz-19... something..
Long story short is bricked.. only a red light in the back of the box, no signal to hdmi.. nothing else
Can you, please, be so kind and tell me if it is any way to unbrick it?
Thank you so much for your patience!
Click to expand...
Click to collapse
Sorry, your box is scrooged. Hope you learned your lesson.....
Ask for a new box for Christmas
Me too. Just 2 days after purchase...
zsolarewicz said:
Me too. Just 2 days after purchase...
Click to expand...
Click to collapse
So, no fix?
mikescorei said:
So, no fix?
Click to expand...
Click to collapse
Tried all that 'magic', unfortunately nothing so far ((
successful unbricking
Hi, I had same problem like you. I fixed it using USB Burning Tool and flash image file from: 4pda forum (I'm not allowed to post link to external site)
You can find here mdz-22-ab image as well as instructions how to get your Mibox to "worldcup mode" (you have to disassemble device first), than you will be able to flash that image and bring your bricked Mibox back to the life. URL link for USB burning tool 2.1.7.3 is not valid, so I used version 2.1.7.0 which I found somewhere.
Hope it will help...
Thank you! You saved my device!
DexV said:
Hi, I had same problem like you. I fixed it using USB Burning Tool and flash image file from: 4pda forum (I'm not allowed to post link to external site)
You can find here mdz-22-ab image as well as instructions how to get your Mibox to "worldcup mode" (you have to disassemble device first), than you will be able to flash that image and bring your bricked Mibox back to the life. URL link for USB burning tool 2.1.7.3 is not valid, so I used version 2.1.7.0 which I found somewhere.
Hope it will help...
Click to expand...
Click to collapse
Can you contact me by email, please? [email protected] . com
It seems I cannot get the device to worldcup mode.. dunno which pins to short.
bricked mdz 22-AB
mikescorei said:
Can you contact me by email, please? [email protected] . com
It seems I cannot get the device to worldcup mode.. dunno which pins to short.
Click to expand...
Click to collapse
hi all
please i have this probleme too. bricked mibox s mdz 22-AB . i try and try to revive it but i dont know whos pins to short to connecte the device to burning tools. can you please share with me if you have any solution.
thniks
my mail [email protected]
crocodile61 said:
hi all
please i have this probleme too. bricked mibox s mdz 22-AB . i try and try to revive it but i dont know whos pins to short to connecte the device to burning tools. can you please share with me if you have any solution.
thniks
my mail [email protected]
Click to expand...
Click to collapse
Email sent
bricked mdz 22-AB
mikescorei said:
Email sent
Click to expand...
Click to collapse
hi
i receive your mail but no picture .jpg
can you please resend it
thanks
mikescorei said:
Email sent
Click to expand...
Click to collapse
hi
thak you very much bro. my mibox s 22-AB unbriked and revive succesful with this methode in the first time
best regard
Does your netflix, amazon and hbo go work? Mine are not working at all
mikescorei said:
Does your netflix, amazon and hbo go work? Mine are not working at all
Click to expand...
Click to collapse
Hello
not the versions in the rom. I had to install other versions from aptoid.tv
thanks
you saved my life !
crocodile61 said:
Hello
not the versions in the rom. I had to install other versions from aptoid.tv
Click to expand...
Click to collapse
Can you share what versions do you use? Pls
Amlogic_USB_Burning_Tool's Config should be Erase flash - Erase normal.
If set to Erase flash - Flash all , DRM key will be deleted and amazon video/Netflix will not work,
I did it ... how do I restore the DRM key?
Vitamin_B2 said:
Amlogic_USB_Burning_Tool's Config should be Erase flash - Erase normal.
If set to Erase flash - Flash all , DRM key will be deleted and amazon video/Netflix will not work,
I did it ... how do I restore the DRM key?
Click to expand...
Click to collapse
You can't. They're gone.
send me a pic of pins to short?
crocodile61 said:
hi
thak you very much bro. my mibox s 22-AB unbriked and revive succesful with this methode in the first time
best regard
Click to expand...
Click to collapse
i have the firmware flashed ok to an external USB stick, but where are the pins to short together on the MDZ 22 AB? or, where is this "test point" im supposed to short to a "metal case? i see 3 metal covers on the board, probably with chips beneath them...do i have to remove one of these? can you send me a pic of the pins to short? [email protected]
Hi guys,
appreciate the hard effort. can you please tell me why has this happened just today morning & send me links or how to repair.
[email protected]
Related
Hi newbie here . I have a problem on my lenovo p780 8gb 119 rom (bootloop). I already flash it via flash tool... Now, my problem is i cant turn it on, i can only turn it on once i press and hold the power vol+ vol- and choose restart and then i can use it for a while but if i plug in the usb cable, the phone suddenly turns off and the process goes back again...
Hope you all guys out there can help me. tia
Note: i can only turn it on(recovery) with the help of usb cable/charger.
Already updated to stock rom to kitkat and still the same problem.
plok08 said:
Hi newbie here . I have a problem on my lenovo p780 8gb 119 rom (bootloop). I already flash it via flash tool... Now, my problem is i cant turn it on, i can only turn it on once i press and hold the power vol+ vol- and choose restart and then i can use it for a while but if i plug in the usb cable, the phone suddenly turns off and the process goes back again...
Hope you all guys out there can help me. tia
Note: i can only turn it on(recovery) with the help of usb cable/charger.
Already updated to stock rom to kitkat and still the same problem.
Click to expand...
Click to collapse
Hi. Let me see... You have the Lenovo P780 SPEED edition. This means that your phone after 04.2014. You need to flash your phone with the new preloader.
Look on your phone box, on the back of the box and read there.
Sooo.. Now because of this wrong preloader, your PC cannot detect your phone.
Now to reflash your phone you do all the things to prepare flash, press flash button,connect the phone, and now come the tricky part:
- open the back case of your phone and press small red button for 20 secconds. Not optional. More yes, less no.
Try this and tell me what happent.
Sent from my Lenovo P780
hi. my pc can detect my phone... i already install all the necessary drivers, the only problem is that i can only do download and format + download. Every time i choose firmware upgrade then click download on v5 of flash tool, the response is unrecognized rom. but in flash tool v3 error 4001 da download failed. regarding the phone box, i dont know where it is... its been a long time.. maybe they already trash it... is it possible for you to do team viewer? Can you also send me a link for the preloader?
Thanks
plok08 said:
hi. my pc can detect my phone... i already install all the necessary drivers, the only problem is that i can only do download and format + download. Every time i choose firmware upgrade then click download on v5 of flash tool, the response is unrecognized rom. but in flash tool v3 error 4001 da download failed. regarding the phone box, i dont know where it is... its been a long time.. maybe they already trash it... is it possible for you to do team viewer? Can you also send me a link for the preloader?
Thanks
Click to expand...
Click to collapse
Hi. Today i am not home.
Ill contact you tomorow, Monday 23.11.2015. Today i am in another town. Precious PC is home .
I am sory for the delay.
Please dont try anything till i contact you.
I dont want you to broke something more
Sent from my Lenovo P780
sure.. no worries..
Hi.. any news? sorry for bugging you too much...
plok08 said:
Hi.. any news? sorry for bugging you too much...
Click to expand...
Click to collapse
In 5 hours i am home. I will contact you then...
Sent from my Lenovo P780
sure no worries...
if possible for fast q/a u can add me on skype.
skype id: plok08
thanks
stympy said:
In 5 hours i am home. I will contact you then...
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi Stympy,
I would also require some assistance, please can you pm me your skype id or any available id to ping you?
many thanks!
abhishek.banerjee said:
Hi Stympy,
I would also require some assistance, please can you pm me your skype id or any available id to ping you?
many thanks!
Click to expand...
Click to collapse
PM me on 6 hours from this message. I think at that hour i will be home to assist you.
stympy said:
PM me on 6 hours from this message. I think at that hour i will be home to assist you.
Click to expand...
Click to collapse
Thank you and done
Sent from my LG-H950 using Tapatalk
abhishek.banerjee said:
Thank you and done
Sent from my LG-H950 using Tapatalk
Click to expand...
Click to collapse
Unexpected event at work...
I have responded to you in private! Good Luck!
hey guys new to this place, not that new, i've always search this forum for some rom or how to fix stuff and other help but never post anything here.
so lets get straight to the point. so basically i want to revive my old samsung galaxy tab 10.1. you know, for fun and nostalgia haha (if possible). so i don't really remember what i did to this tablet that it becomes like what it is today. cannot be turned on, no display when charging, no nothing. i do remember rooting it before. when it charge, there is a little warm going on on the tablet but nothing happen. when i connect it to my pc, it recognize it as unknown device the first time, and then i hold the power button for couple of second and my pc recognize it again but now as apx but no driver available. so i made a little research just now and i found that the tablet may have a chance to be fix with the use of nvflash or something. so all im saying is it really my tab can be fix without spending money? if can how do i do it? i have a little experience about flashing rom and recovery. but nothing on how to use nvflash. i do really appreciate your help to bring me back this tab that meant so much for me and my family back in the days.
http://www.gsmforum.ru/threads/223383-Samsung-GT-P7500-%D0%BE%D0%BF%D1%80%D0%B5%D0%B4%D0%B5%D0%BB%D1%8F%D0%B5%D1%82%D1%81%D1%8F-%D0%BA%D0%B0%D0%BA-APX
you download this files...let me know if you fix your tab
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
yes, i can't upload this files...there's a error! did you downloaded 3 files and runned the process? the user doesn't write after the process but i think problem fixed. Ask you with topic when you registe youself...
jackfiq said:
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
Click to expand...
Click to collapse
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
bollicine said:
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
Click to expand...
Click to collapse
can you guide me on how to do it? from start till end. thank you soo much for helping me out
jackfiq said:
can you guide me on how to do it? from start till end. thank you soo much for helping me out
Click to expand...
Click to collapse
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
https://forum.xda-developers.com/showthread.php?t=1130574]
bollicine said:
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
Click to expand...
Click to collapse
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
jackfiq said:
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
Click to expand...
Click to collapse
you install the driver for to use nvflash...read this guide to install the driver https://forum.xda-developers.com/showthread.php?t=1130574]
but to use file.batch 1th recovery_P75xx.bat of Recovery_P75xx_110710_RemoveUsbDriver.zip to run the nvflash and the recovery and you post the result. bye
I think your battery is complet down, that means the current is under the charging level.
bierma32 said:
I think your battery is complet down, that means the current is under the charging level.
Click to expand...
Click to collapse
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
jackfiq said:
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
Click to expand...
Click to collapse
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
bollicine said:
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
Click to expand...
Click to collapse
hello again. sorry for didnt post any update . im actually really busy with studies and i already told that my university is far from my home. so i didnt get a chance to get back here until a month. now im here exicted to the thing only then come out with this type of output
Recovery the bootloader...
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
so i've made a little research.. so it seems that my device's bootloader is locked. so is there anyway to unlock my bootloader??
by the way im really sorry i didnt update for a long time. but i hope you still want to keep in touch with me to solve my problem. much thanks!
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Victor Oliveira said:
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Click to expand...
Click to collapse
Are you using SP Flash Tool on windows or linux?
I am using it on windows, but if necessary I can install Linux
Augustoandro said:
Are you using SP Flash Tool on windows or linux?
Click to expand...
Click to collapse
I am using it on windows, but if necessary I can install Linux
Victor Oliveira said:
I am using it on windows, but if necessary I can install Linux
Click to expand...
Click to collapse
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
Okay, I'll try and re-post the result here
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
So I took a look at this link, but there is no solution to this error, would you have any other tips on how to help me?
me too
Same problem here, I think is corrupted preloader.
Anybody?
brudieu said:
Same problem here, I think is corrupted preloader.
Anybody?
Click to expand...
Click to collapse
I also think that's it, did you solve it?
Victor Oliveira said:
I also think that's it, did you solve it?
Click to expand...
Click to collapse
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Augustoandro said:
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Click to expand...
Click to collapse
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
mine is till dead, I tried with linus but did not work
any Idea?
Victor Oliveira said:
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
Click to expand...
Click to collapse
Yes
brudieu said:
mine is till dead, I tried with linus but did not work
any Idea?
Click to expand...
Click to collapse
Mine is still dead, I do not even know what to do anymore, is yours also the kiicaa mix?
Solution
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Victor Oliveira said:
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Click to expand...
Click to collapse
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
brudieu said:
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
Click to expand...
Click to collapse
I used this rom https://yadi.sk/d/OBnsnz2t3RMo2B
and SP_Flash_Tool_v5.1628
thanks Victor Oliveira your solution worked a treat many thanks and a thank you sent
Hej folks
i took a long break in the root sector
and probably took it a little rushed
and I hope it is not too late to save the M5 8.4 LTE ...
I had installed Root with magist for about 3 years and never changed anything, now I no longer need the tablet and want back to stock,
I have re´locked the bootloader and wanted to restore stock via recovery ...
the formating worked well but since then i only have 3 menus and no way to get access anymore
does anyone have an idea ´or is the good piece gone?
....................................here 4 Pics with the 4 menu
(im to young on this forum with 8years membership i cant post pics.... nice)
thanks for help :angel:
has nobody an idea
its been years since ive messed about with all this, but i seem to remember a lady made a small program on windows using python to reaccess the device to unlockand relock the boogloader with brootforce. i carnt post urls but its in the first few pages of a google srarch hope this helps a bit
dazzadavadaski said:
its been years since ive messed about with all this, but i seem to remember a lady made a small program on windows using python to reaccess the device to unlockand relock the boogloader with brootforce. i carnt post urls but its in the first few pages of a google srarch hope this helps a bit
Click to expand...
Click to collapse
Thanks for the answer
I haven't read anything about it until now, I only found one page on gitHub that is from BaumFX but i havent tested
Is what you mean in general for android or explicitly for the M5?
niwes said:
Thanks for the answer
I haven't read anything about it until now, I only found one page on gitHub that is from BaumFX but i havent tested
Is what you mean in general for android or explicitly for the M5?
Click to expand...
Click to collapse
assuming you tried hisuite already?
tensux said:
assuming you tried hisuite already?
Click to expand...
Click to collapse
yes i tested before
HiSuite say "this device cant be restored over HiSuite"
niwes said:
yes i tested before
HiSuite say "this device cant be restored over HiSuite"
Click to expand...
Click to collapse
i had the same issue with my wifi version, was able to push stock recovery using adb commands, then restore thru recovery, but i had not of course relocked the bootloader
I just had a dude unlock my bootloader two days ago for the SHT-AL09. It was 30$ though.
Please, more info bout this dude. How can I contact him?
ministryofsolutions. 30$ Don't know how long he will be doing it for. He can do the latest firmware and it takes about 2 hours. Then if you're like me you'll spend the next 3 days trying to get twrp and root installed. It's a pain in the ass for the Sht-Al09. Chinese version on Asian firmware. You're going to want to keep backups as you will most likey brick your device several times Like I did. Or use the erecovery feature. I love this device.
sorry but i don't understand anything in this post
i try my luck at the local phone stations
maybe someone can help me there , everything I do goes wrong with the M5
niwes said:
sorry but i don't understand anything in this post
i try my luck at the local phone stations
maybe someone can help me there , everything I do goes wrong with the M5
Click to expand...
Click to collapse
did you tried the tespoint method?
https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
it requires u to physically remove the lcd screen( isn't that difficult)
karlkluwe001 said:
did you tried the tespoint method?
https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
it requires u to physically remove the lcd screen( isn't that difficult)
Click to expand...
Click to collapse
hmm interesting
thanks ... but i can´t find the right files for my tablet on easy-firmware
do I get the name of the board ,after opening?
niwes said:
hmm interesting
thanks ... but i can´t find the right files for my tablet on easy-firmware
do I get the name of the board ,after opening?
Click to expand...
Click to collapse
if u have the m5 8,4 lte your model name is SHT-W09, as shown here
https://www.gsmarena.com/huawei_mediapad_m5_8-9092.php
board software
https://easy-firmware.com/index.php?a=downloads&b=folder&id=34131
it maybe available somewhere else -here of course
https://androidhost.ru/search.html and https://androidfilehost.com are good starting points
though it is possible that they are all behind paywalls like easy firmware
searching for board software u have to alter the names like:
SHT-AL09-BD
SHT-AL09 board software
schubert -AL09-BD
schubert is the internal name for 8,4 version where as cameron is the name for mine, the 10 inch one
if u're finding and flashing your don't erease nvme and oem.
Otherwise u have to do a "cdma rewrite" via "HCU client" or manually edit your nvme via hex-editor, because u lost the serial number and imei
pm me for discord in case u need advise during the process
and yes after opening the model name is printed on back cover
Hi.
Yesterday I've recived my ordered Vontar. I was not a fan of the system so i changed it via sd card. I've done it a couple of times with different ones but it something strange happened. Now, when i turn on this device with a 'reset' button and a sd card in it, it won't show 'updating' screen. In fact, I can't even go to 'apply update from ext' - the 7z file won't show under this option. But, I can install TWRP from Slimbox therad and wipe all. Also i tried to 'install' img file via TWRP but in the end it show 'System not installed'. I checked all the comments in this section but i found no answers. I think that's the only place for me to receive help because i was searching the web for 5 hours and now i'm out of ideas. I'm using custom roms on my phone since 2015 but this tv boxes are new to me.
Please help me.
Thanks in advance.
andreyGM said:
Hi.
Yesterday I've recived my ordered Vontar. I was not a fan of the system so i changed it via sd card. I've done it a couple of times with different ones but it something strange happened. Now, when i turn on this device with a 'reset' button and a sd card in it, it won't show 'updating' screen. In fact, I can't even go to 'apply update from ext' - the 7z file won't show under this option. But, I can install TWRP from Slimbox therad and wipe all. Also i tried to 'install' img file via TWRP but in the end it show 'System not installed'. I checked all the comments in this section but i found no answers. I think that's the only place for me to receive help because i was searching the web for 5 hours and now i'm out of ideas. I'm using custom roms on my phone since 2015 but this tv boxes are new to me.
Please help me.
Thanks in advance.
Click to expand...
Click to collapse
This usually indicate that either the bootloader is not compatible, The DTB dosnt have the right gpio pins assigned to the reset button making it non functional among other reasons, i Strongly advise against using an SD card to try new firmwares as you can end up in a situation like this where your box is semi broken with no way to get out of it, you should buy/obtain a USB A Male to USB A Male Cable & Use USB Burning Tool As This Is How to Recover From a Bad Flash & Not 100% Compatible Firmwares and even recover a "Bricked Box" that looks like it wont even power on (no LED or output to TV), Been Using This Method For Years And Havent Bricked A Box Beyond Repair Yet
aidanmacgregor said:
This usually indicate that either the bootloader is not compatible, The DTB dosnt have the right gpio pins assigned to the reset button making it non functional among other reasons, i Strongly advise against using an SD card to try new firmwares as you can end up in a situation like this where your box is semi broken with no way to get out of it, you should buy/obtain a USB A Male to USB A Male Cable & Use USB Burning Tool As This Is How to Recover From a Bad Flash & Not 100% Compatible Firmwares and even recover a "Bricked Box" that looks like it wont even power on (no LED or output to TV), Been Using This Method For Years And Havent Bricked A Box Beyond Repair Yet
Click to expand...
Click to collapse
Thanks for an advice. Yesterday i was very scared because of this situation. I thought that i wasted about 50$ but now i'm more chilled. Somewhere i've read that Vontar is basically the same as for example as HK1 but installing it's OS was not a great idea (I've done similar things on my Huawei G620s with the similar phone OS). I will try the USB method and reply the result. My ordered cable will be in a few days. Again, thanks for a reply. This thread could be useful if someone will have the same problem like me.
andreyGM said:
Thanks for an advice. Yesterday i was very scared because of this situation. I thought that i wasted about 50$ but now i'm more chilled. Somewhere i've read that Vontar is basically the same as for example as HK1 but installing it's OS was not a great idea (I've done similar things on my Huawei G620s with the similar phone OS). I will try the USB method and reply the result. My ordered cable will be in a few days. Again, thanks for a reply. This thread could be useful if someone will have the same problem like me.
Click to expand...
Click to collapse
Good Luck & Let Us Know How You Get On
aidanmacgregor said:
Good Luck & Let Us Know How You Get On
Click to expand...
Click to collapse
Like You said. Two minutes and Vontar is running a new OS without any problems. My SD card will come back to my car as a navigation. Thank You.