so i downloaded magisk and twrp then realized i had a miui 11 update so i updated then it rebooted and went to twrp i was confused so i went to reboot and system then clicked and now its stuck on pocophone by xiaomi powered by android what do i do please help iam seriously scared
seems like dmvarity issue
flash magisk20.1 again,
and reboot
2. if bootloop again then this means you have encryption error, FORMAT DATA from wipe (you will loose all your data) and try!
also if still you are stuck at bootlogo then
flash miui11 recoveryrom via twrp then reboot, complete miui11 setup and comeback for magisk
the final solution would be to flash miui11 FASTBOOT ROM via flasher, (pc) which will wipe all your data , then reboot, then miui11 setup, then comeback to twrp for magisk
flashing miui and magisk altogether always went in bootloops or screen freezes for me too!
Dear guys
I tried to help a friend of mine rooting his Pocphone F1
SO these have been my steps:
Unlocked bootloader
Booted TWRP (only boot ... no instalation)
Installed last MAGISK (20.1 if I remember well)
Reboot to System
In some cases when I reboot I obtain a soft boot loop
Only pressing pwr+Vol up several times (honestly I have not yet understood which is the right magic sequence ...) I have the right boot to Android
Any idea to fix the issue ?
Thanks a lot
Paolo
Related
Hi everybody,
I got my Swift 2 8 months ago and have finally decided to root it using TWRP. So I unlocked my bootloader and then installed TWRP using the official guide at https://twrp.me/devices/wileyfoxswift2.html. I also wiped my cache and dalvik cache.
However, now I have done this, whenever I try to boot, I receive both the amber and red warnings about corruption and then get stuck in a bootloop on the first black and white boot image.
Please can someone help me get back into android; if possible I would like root but in the end just a working phone.
Thanks.
As far as I know it's a dm-verity issue. There might be several ways to fix it but the only one I know is to flash Magisk from TWRP. I still run version 12 because 13.x won't install for me.
From my expierience, unlocking and locking bootloader will wipe your userdata , so backup! How I root mine is, first unlock through fastboot, than fastboot boot twrp, instead of flashing, flash magisk through twrp, than lock the bootloader again through fastboot. This keeps you from getting messages about corruption and has you rooted. Whenever I need twrp I just boot it instead of flashing it. I also made a backup using twrp, just to keep things safe and easy to restore...
Edit: To get out of bootloop you either do a factory reset or flash the image found in this forum using fastboot update...
You should have a look at this thread: https://forum.xda-developers.com/swift-2/how-to/marmite-wileyfox-ota-nougat-android-7-1-t3654999
I re-unlocked my device a few days ago after a long time of using MIUI. Unfortunately, I am now facing a peculiar problem I had not faced the previous time I unlocked my device.
I cannot seem to replace MIUI stock recovery with official TWRP.
If I use fastboot flash recovery xxx.img, the terminal does confirm that the action was successful. Yet, when I reboot into recovery, I am greeted by Mi-Recovery 3.0 instead of TWRP.
My initial thought was that maybe there was some restriction in MIUI that prevented the stock recovery from being replaced, so I flashed RR 5.8.5-FINAL. I still cannot flash TWRP.
Some other info:
The MIUI build I was on: MIUI 9 7.9.21 Global Beta
My phone: RN3 SD 2GB/16GB variant, Fpc fingerprint sensor
The temporary workaround I used to flash RR was directly booting into TWRP using fastbooot boot xxx.img
NOTE: I did a standard wipe (factory reset, followed by wiping System, Data and Cache) when I flashed RR.
As you might imagine, using fastboot to boot into TWRP every time I want to flash something is quite tiring and so if anyone can help me to permanently flash TWRP, I'd be really grateful. Thanks in advance.
PS: If this question has already been answered, then please guide me to the relevant thread and I will take down this one.
This problem also happened to my friend's Redmi Note 3 MTK. I don't know if it's going to work on KENZO or not.
The solution is to flash the TWRP recovery image through fastboot ==> Turn off the device by holding down the power button (DISCONNECT PHONE FROM PC) ==> Boot the recovery using button combinations
This should let you boot into TWRP and stays permanent after the first session
Flashing Through Fastboot/EDL Mode
Flashing Twrp through Fastboot is the permanent way of flashing the recovery...The method is very simple and can be done even on locked bootloader but the thing in locked bootloader is that once you have flashed the TWRP the internal storage is inaccessible because the data is encrypted so you need to wipe->format data ...then press "yes" ..by typing yes the internal storage will be formatted completely so make sure you have a backup ...and do copy the ROM file in SD card for flashing ...after wiping process press install then select SD card and flash the ROM and gapps and enjoy the TWRP...
Refer this link for flashing process youtu.be/rCONN1_IPuU(please add https:// before the link)
Hope this solves your problem...
same problem !! did you find any solution !!!
Hey guys ,
I unlocked bootloader and flashed official twrp via fastboot . I successfully booted into twrp but when I click reboot my phone stuck on mi boot logo . I personally tried many thing to tackle this problem. But every time I got same thing . Can anyone solve this ?
Redwolf twrp is working fine .
Yes, happend the same to me, basically what's happening is that your phone can't decrypt itself in the boot.
What's the fix? Flash twrp, go into it
Then wipe EVERYTHING,even format.
That will be you new partitions (new encryption) in your phone.
Then with everything formated, plug your phone in twrp and copy whatever you want, and viola.
You're done, copy the rom you want to flash and will boot.
Please let me know when your phone is fixed.
Or you can just root your device
I had the same issue as you yesterday.
You can try lazyflasher to prevent bootloop
Hello everyone,
I have a redmi note 4X with MTK soc
The bootloader is unlocked.
I want to flash TWRP recovery. I use adb, the "nickel " TWRP, and message in the cmd window was "ok"
but when i reboot, whatever the way (buttons or adb reboot), it still reboot on the stock recovery.
I've tryed many times, even with a "moly" TWRP (with my MI 4S, the "aqua" didn't work and I had to flash the "libra" one and it was all effective)
Tryed to re install adb, etc. Wathever, it's always "ok" in adb but still reboot on the stock recovery.
Can't try with flashtool or that kind of (Mitool Flash atc) because I can't find the right "scatter" files....
Does anyone have a clue? what is blocking?
Thanks for help
You must reboot back to recovery, not to system, after installing TWRP.
1. Install TWRP
2. Reboot to Recovery (not to system) - this means you will see TWRP screen again
3. Now you can reboot to System
This is only done for the first time installing TWRP. Next time, TWRP will always be there.
Hello,
Well please I need new help !!
Now I'm fighting a new issu !! Now that I at last managed to flash TWRP, and enter in this custom recovery, my phone don't boot system anymore !! stay stuck on the MI logo (
Do I need to flash the boot.img ? But why the hell would a recovery flashing would have change the boot partition??
And if so, where please could I find the boot.img for MIUI 10.1 stable?
Hello,
For those who have the same issu.
I've flashed a boot.img file found in unzipped miui rom zip.
- download from xiaomi.eu the right rom
- unzip
- find the boot.img file
- flash it with adb / fastboot
Well, So now I have my phone and datas back, and can boot on a custom recovery; but TWRP don't work well. Doesn"t keep the settings, can't install anything (it doesn't find any file when exploring ) and can't wipe cache (as if it can't read partition). That's all I tryed by now, I despair a little and that's a lot of time for an easy thing (was very easy on other phones)
Well, this time I'm flooded, i' ll take somme time but don't give up trying to root that phone
Start again, and I recommend ZCX-TWRP-3.0.2-X-REDMI_NOTE4-MTK_Nikel-16.11.18.img and Magisk instead of SuperSU
https://xiaomifirmware.com/downloads/twrp-custom-recovery-redmi-note-4-mtk/
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
You have to be decrypted or flash DMverity for A12. I assume You mean Magisk 24.1 the current version is 24.3
Hi. This is what I did:
I downloaded and installed original firmware through fastboot (fastboot was still on).
I also installed original recovery through fastboot.
After that my oneplus 5t was in stock condition, apart from the bootloader, which was unlocked.
After that I managed to install TWRP through fastboot, and then lineage 19.
The thing is that TWRP doesn't support lineage 19, for one reason or another. Or it could be the other way around (lineage 19 doesn't support TWRP). In any case I had a phone which would only go in fastboot mode.
At least I knew what to do, as I did it already: reinstall stock firmware and recovery.
Long story short, I installed LOS recovery and lineage 19, and everything works fine.
Thanks everyone, and especially thaidroid, for the support.
Have a nice day.
miclombardo said:
Good evening dear members, I ask for your kind advice, as I have done something wrong to my Oneplus 5t.
I upgraded my Oneplus 5t with "lineage for microG" 19.1 (from lineage 18).
I had installed TWRP 3.5.0_9 (phone encrypted).
It booted fine the first time into system.
The problem arose after I tried to install Magisk 21.4 from TWRP.
Now the phone only boots in recovery, but it doesn't enter TWRP's menu. It stays on the first TWRP screen (where it shows the version number).
The good thing (I hope) is that I can enter fastboot mode.
I tried flashing TWRP again from fastboot to no avail.
I tried flashing boot.img from fastboot (taken from the original firmware), but still no luck.
Is there a way to install the original firmware from fastboot?
I think starting from scratch would be a step into the right direction.
Please give any suggestion which I fill follow to the letter.
Thank you, thank you, thank you!
Click to expand...
Click to collapse
Its not working cus you need to format data in recovery and then reboot it.
kirknado18 said:
Its not working cus you need to format data in recovery and then reboot it.
Click to expand...
Click to collapse
It wont boot cus your encrypted formatting data will allow op5t to boot.
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
paradoxiumwind said:
latest lineage + magisk = stuck on boot logo, I tried an older version of lineage + magisk (known to work), same thing.. what did I do?
Click to expand...
Click to collapse
What recovery are you on? TWRP?
I use the one posted alongside each version: https://download.lineageos.org/dumpling
can you help?
I need to root so I can titanium backup everything. but I can't root. I suspect I might need to fully format and wipe and start again, I tried wiping data and doing a fresh install, but after sideloading magisk it just fails to boot every time now.
Does it boot regularly BEFORE installing magisk? I am trying to define the source of the problem.
I have installed lineage 19 and magisk, and I confirm you that it's possible
Yes. It boots fine if I just install lineage then nevermindthegapps. problem only occurs if I flash magisk. I tried installing the .apk and patching the .boot image manually in it and then fastboot flashing that, but same thing.
oh - one possible thing that it may be - is that I had a couple of modules loaded (I think a gcam fix mod and something similar) in magisk, and I read somewhere about people having them stuck 'installed' despite demoving all traces of magisk app. whether that is the problem I don't know.
This is very strange. That's what I did:
Sideload lineage recovery
Sideload lineage 19
Download magisk apk
Patched boot image from lineage 19.zip
Sideload the patched boot image
And that's it it all worked
May I suggest you to start all over again?
is wiping system data sufficient or do I need to format it? I'd rather not lose my appdata- but I can't rescue it without root / titanium backup :/
Try first without formatting, and see how it goes
I wiped system/cache, installed lineage-19.1-20220719-nightly-dumpling-signed.zip / mindthegapps, phone booted up fine - rebooted fine.
ok, good. Now download latest magisk app and patch the boot img.
do I click patch vbmeta in image?
Yes.
First extract the file called boot.img from lineage.zip you just installed.
Then in magisk select "patch vbmeta in image".
Magisk should produce a file named something like " magisk_pached-24300_f41h3.img".
That patched file should be sideloaded.
Installation is explained really well by topjohnwu
it wouldn't flash without selecting vbmeta, so tried with, flashed it, now i'm sitting looking at the boot logo.