Hey Guys,
Initially before I got my phone I had another perception on how smart stay works and was a bit disappointed...
My thoughts were, that if you are reading something it checks up on you if you are still looking = Screen stays on and if you look away it turns off.
The breaking point in what I thought was, that after the screen has shut down and you look at it again (Lets say a time frame of 5-10 Seconds) it turns on again.
I hope some DEV reads this and could make a MOD or something like that. Would be really cool and I dont think, that programming that is that tough.
Regardless of this I would love to have Smart Stay as a toggle option in the 15 Toggle mode or something, is that possible?
Thanks in advance
think that you have put your phone aside after looking at it. And it will have to monitor your eyes on that time too. Too much battery drain because camera needs to be on all the time! this is why samsung didnt enabled this!
Ruchira88 said:
think that you have put your phone aside after looking at it. And it will have to monitor your eyes on that time too. Too much battery drain because camera needs to be on all the time! this is why samsung didnt enabled this!
Click to expand...
Click to collapse
The camera does not need to be on "all the time". The way it works is as follows:
- The screen timeout is set to a certain time - let's say 30 seconds. After 30 seconds have elapsed, the screen will turn off if Smart Stay is not activated.
- If Smart Stay is active, after 30 seconds the camera will switch on and determine whether you are looking at the screen. If it determines you are, it will trigger the screen to stay on for another 30 seconds, after which it will do the same again, and so on. Once it has confirmed you're looking at the screen, the camera will switch off again.
Hence in fact the camera only needs to go on for a very short period of time - just enough to see your eyes, basically. You'll know it's doing this because it briefly shows an eye icon in the notification bar.
Yeah and I meant that after the screen is off it just should monitor for another 30 seconds or so
Sent from my GT-I9300 using xda app-developers app
Which would increase battery drain tenfold.
anthropolyte said:
- If Smart Stay is active, after 30 seconds the camera will switch on and determine whether you are looking at the screen. If it determines you are, it will trigger the screen to stay on for another 30 seconds, after which it will do the same again, and so on. Once it has confirmed you're looking at the screen, the camera will switch off again.
Click to expand...
Click to collapse
ok lets say screen is turned off and camera is checking eyes once every 30seconds. what if I happen to look at it on the 15th second
i have put this in smart stay threads before, if only people would search before asking questions.
anyway, in order for smart stay to work well this condition must be met - open front camera and look at it if you can see your face and it isn't darkened then smart stay will work well. because some may ask that smart stay doesn't work even if lighting is good, that is because your face is darkened because of shadow and you are at the back of lighting.
if that condition is met then :
1. smart stay should be enabled obviously. set screen timeout to 15 seconds.
2. look at screen, you will see in 5 seconds the eye icon for smart stay will light up
3. turn your phone at an angle away from your face but enough that you can see the eye icon 5 seconds later.
- this time the screen dims but not turn off.
4. face phone screen again, 5 seconds later eye appears the screen brightens up.
5. repeat step 3, screen dims. then this time remain not looking at screen.
- after dim, 5 seconds later eye checks again and detects you're not facing screen thus it turns off screen.
now some will be thinking, having the front camera turn on at intervals will just use more battery. the thing is,turning the front cam to sense your face for just about 2 seconds at intervals won't consume as much battery consumed as compared to the display still turned on for 15,30seconds,1minute or more even when you're not using the phone.
purpose of smart stay:
1. already well-known since this is what they advertise for this feature, keep light on so you don't have to annoyingly touch the screen at intervals you think the screen timeout is nearing so as not to be inconvenienced by the screen turning off when you are reading or browsing.
2. THIS IS THE MAIN PURPOSE - to turn off display way before the screen timeout because there's no use having the display still on when you're not using the phone. we all know the display is one of the things that can drain battery fast. this is very helpful for those who set there screen timeout to 1minute or more.
note : the time interval for smart stay checking/eye appearing is different for the screen timeout interval you set.
a bit harsh but quite correct, he took time out to give you an explanation, and a very good one, a hit on the thanks button is what you should have done! Nice one radeon :thumbup::thumbup:
Sent from my GT-I9300 using xda premium
radeonxt said:
i have put this in smart stay threads before, if only people would search before asking questions.
anyway, in order for smart stay to work well this condition must be met - open front camera and look at it if you can see your face and it isn't darkened then smart stay will work well. because some may ask that smart stay doesn't work even if lighting is good, that is because your face is darkened because of shadow and you are at the back of lighting.
if that condition is met then :
1. smart stay should be enabled obviously. set screen timeout to 15 seconds.
2. look at screen, you will see in 5 seconds the eye icon for smart stay will light up
3. turn your phone at an angle away from your face but enough that you can see the eye icon 5 seconds later.
- this time the screen dims but not turn off.
4. face phone screen again, 5 seconds later eye appears the screen brightens up.
5. repeat step 3, screen dims. then this time remain not looking at screen.
- after dim, 5 seconds later eye checks again and detects you're not facing screen thus it turns off screen.
now some will be thinking, having the front camera turn on at intervals will just use more battery. the thing is,turning the front cam to sense your face for just about 2 seconds at intervals won't consume as much battery consumed as compared to the display still turned on for 15,30seconds,1minute or more even when you're not using the phone.
purpose of smart stay:
1. already well-known since this is what they advertise for this feature, keep light on so you don't have to annoyingly touch the screen at intervals you think the screen timeout is nearing so as not to be inconvenienced by the screen turning off when you are reading or browsing.
2. THIS IS THE MAIN PURPOSE - to turn off display way before the screen timeout because there's no use having the display still on when you're not using the phone. we all know the display is one of the things that can drain battery fast. this is very helpful for those who set there screen timeout to 1minute or more.
note : the time interval for smart stay checking/eye appearing is different for the screen timeout interval you set.
Click to expand...
Click to collapse
Also, don't forget to mention "SMART STAY doesn's work in dark". It can't see your face well.
Is it possible to turn off the function what makes the watch turn when you flip it? When turning your arm to look at it.
Erik1805 said:
Is it possible to turn off the function what makes the watch turn when you flip it? When turning your arm to look at it.
Click to expand...
Click to collapse
Not that I know of. Now if you turn the screen off in the phone settings; the watch will require a bit more from you to turn on when you look at it. Sometimes for me, takes 2-4 seconds to turn on to read. Most times I just touch the face. LOL
Erik1805 said:
Is it possible to turn off the function what makes the watch turn when you flip it? When turning your arm to look at it.
Click to expand...
Click to collapse
Has been answered dozen of times:
Not if you still wan't to see notifications, else just mute the watch, this disables the gesture also.
Hi, I am unfortunate enough to live in a place that still uses Daylight savings time. Yet another effect...today i woke up, and my watch read 6:00. When I pressed the top button to turn on the backlight and effectively wake the watch, it then read 5! The sleep mode still reads one hour ahead. Is this a bug or preference I've missed?
Try restarting your watch, that did the trick for me.
thanks...i did both watch and phone....now back in action!
Yeah, that was the feature not bug and it's gone after reboot
Sent from my XT1635-02 using Tapatalk
Hi,
I have this issue with my watch: sometimes I can light-up the watch by touching the display and most of the times this doesn't work. Is this a feature (when it works) or a bug (when doesn't work)?
Thank you!
Just few seconds after your screen goes off, it would get back on by tapping on screen. In other cases you couldn’t make it on by tapping.
I just hop on this thread about screen light.
I trying to find the setting to turn off the screen while on running activity. I notice the screen is light on entire running activity until complete. I had already enable wrist lift option to turn on the screen when i need checking the running stats.
Anyway find the setting to turn it off or perhaps sleep mode. Thank you in advance.
There is no such option in Zepp yet. Hopefully they will add it, since screen-on is very battery-consuming.
casper709394 said:
I just hop on this thread about screen light.
I trying to find the setting to turn off the screen while on running activity. I notice the screen is light on entire running activity until complete. I had already enable wrist lift option to turn on the screen when i need checking the running stats.
Anyway find the setting to turn it off or perhaps sleep mode. Thank you in advance.
Click to expand...
Click to collapse
You can turn it off by going into workout settings.
If you disable light on lift, touch to light up display will be also disabled. At least it happens on mine.
I trying to find the setting to turn off the screen while on running activity. I notice the screen is light on entire running activity until complete. I had already enable wrist lift option to turn on the screen when i need checking the running stats.
Anyway find the setting to turn it off or perhaps sleep mode. Thank you in advance.
There is no such option in Zepp application. I think there should be though, since having the screen on for ~2 hours is quite battery-consuming.
Yeh, that would be a nice option to have...
Yes hopefully they work on something with to turn off the screen. This version worst i compare to Amazfit Pace which have the easy lock function and the max heart rate alert.
But T-Rex really disappointed despite launched later time compare to Pace. First generation even better and seems T-Rex going backward.