Related
Hello ! how to install Xposed on rooted 6.0.1 M4 Aqua device without Bootlooping ? , i have installed Xposed Framework by TWRP (xposed-v86-sdk23-arm64.zip ) and ive had a bootloop.
I flashed it without problems. First boot took a very long time though.
how much time ? mine was lying down like 20 minutes and nothing happened
PelsonMX said:
how much time ? mine was lying down like 20 minutes and nothing happened
Click to expand...
Click to collapse
Mine took around 25 minutes so be patient
thanks ! all working fine ! thread can be closed
Sorry...only flash in recovery? Dont flash in pc? How?
Enviado desde mi E2303 mediante Tapatalk
you just installing the *.zip file and making a dalvik cache wipe and thats it
Can you put the link to specific archive?. Thanks a lot
Enviado desde mi E2303 mediante Tapatalk
All done. Thanks
Enviado desde mi E2303 mediante Tapatalk
Rooting Guide For Elephone S7
install twrp Recovery and Root Elephone S7,
Instructions-
twrp Installation-
The touch screen works with this TWRP??
Thanks
Enviado desde mi S7 mediante Tapatalk
FrankJHTC said:
The touch screen works with this TWRP??
Thanks
Enviado desde mi S7 mediante Tapatalk
Click to expand...
Click to collapse
Not Yet.. is necessary a kernel fix to have touch working.
You can use a workaround, using an OTG mouse to operate with TWRP
3) Boot your device into Recovery mode (TWRP) by pressing Volume UP + Power button.
Click to expand...
Click to collapse
i't not correct, please change in:
3) Boot your device into Recovery mode (TWRP) by pressing"Home Button + Power"buttons same time until Boot Menu Selection.
megthebest said:
Not Yet.. is necessary a kernel fix to have touch working.
You can use a workaround, using an OTG mouse to operate with TWRP
i't not correct, please change in:
3) Boot your device into Recovery mode (TWRP) by pressing"Home Button + Power"buttons same time until Boot Menu Selection.
Click to expand...
Click to collapse
Ok thanks for sugession, is this Correct
I did it.. And works perfect.. Thanks
Enviado desde mi S7 mediante Tapatalk
FrankJHTC said:
I did it.. And works perfect.. Thanks
Enviado desde mi S7 mediante Tapatalk
Click to expand...
Click to collapse
are u sure touch is work,
XN Logos said:
are u sure touch is work,
Click to expand...
Click to collapse
Not.. Don't work.. I mean that works the root... Sorry
Enviado desde mi S7 mediante Tapatalk
Some one else root the phone??. Since I have xposed my battery is worst.. I install greenify, power napa and Amplify.. But it's still bad .. Just three hours of average screen
Enviado desde mi S7 mediante Tapatalk
FrankJHTC said:
Some one else root the phone??. Since I have xposed my battery is worst.. I install greenify, power napa and Amplify.. But it's still bad .. Just three hours of average screen
Enviado desde mi S7 mediante Tapatalk
Click to expand...
Click to collapse
I have root, but not yet installed xposed + modules. I'm using it only with supersu, dolby atmos and adaway.
Only disappointed by touch not so accurate and sensible and general smoothness not so good if compared to some other devices with lower specs
TWRP still does not dotyk.Existuje another version? I do i have not OTG cable for the mouse.
Yea same, will there be a working touch version?
vaskovass said:
Yea same, will there be a working touch version?
Click to expand...
Click to collapse
I hope so
Enviado desde mi S7 mediante Tapatalk
---------- Post added at 01:55 PM ---------- Previous post was at 01:52 PM ----------
By the way ... Any one used the mod grorkmod_v1.1? What exactly is it worth? It's for P9000..
Enviado desde mi S7 mediante Tapatalk
TWRP 3.0.3 for Elephone S7 4g
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
jemmini said:
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Click to expand...
Click to collapse
Thanks a lot my friend!
you really rock! Master jemmini, you deserve a little dotation from all users in the forums that will use your TWRP, please add donation link!
megthebest said:
Thanks a lot my friend!
you really rock! Master jemmini, you deserve a little dotation from all users in the forums that will use your TWRP, please add donation link!
Click to expand...
Click to collapse
Hello. The touch screen works with this version?
Στάλθηκε από το S7 μου χρησιμοποιώντας Tapatalk
efbill said:
Hello. The touch screen works with this version?
Στάλθηκε από το S7 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Can it be used with a 3gb version?
Sent from my Redmi Note 2 using Tapatalk
jemmini said:
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Click to expand...
Click to collapse
Reserved
efbill said:
Hello. The touch screen works with this version?
Στάλθηκε από το S7 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Yes, sure!
nickzeptepi said:
Can it be used with a 3gb version?
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
I'm not sure, Master jemmini created it on the latest kernel for 4Gb version, so i don't know if kernel are different between 4Gb and 3Gb. It's a risk to try on a different model of S7
Hi everyone !
I did flash it on my 3G/16G model and it works fine ! Thanks a lot !!
Best regards,
Philippe
EDIT: Just i didn't used the scatter file given, because it might not suit my model. I used the one given with the S7_3g_20161219205038_v1.3 firmware. I can download it somewhere if someone needs it.
jemmini said:
TWRP 3.0.3 for Elephone S7 4g
Based on Android 6.0 firmware ver.Elephone_S7_4g_v1.9 / 2017年 01月 09日 星期一 18:38:41 CST
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Click to expand...
Click to collapse
Thank you for the amazing job dev.
I'm not the developer for this ROM, but I would like to share this clean ROM I have been using.
Link: http://mi-globe.com/index.php/rom-builder/
Select : Mi Note 2
Codename: scorpio
Click Show Expert Settings to customize your ROM.
- I usually select don't overwrite recovery.
Note: Usually you need to flash twice for it to work, sometimes you get an error 7 if you're flashing from a clean wipe, if that's the case you can either:
A. flash again, check to see there is no errors.
B. boot to system and set things up; then reboot back to recovery and flash it again (so that the symbolic links are in place), you might need to root it before flashing it.
Latest Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Consider getting the xMIUI Module to customize your experience and support SolarWarez.
edmondt said:
I'm not the developer for this ROM, but I would like to share this clean ROM I have been using.
Link: http://mi-globe.com/index.php/rom-builder/
Select : Mi Note 2
Codename: scorpio
Click Show Expert Settings to customize your ROM.
- I usually select don't overwrite recovery.
Note: Usually you need to flash twice for it to work, sometimes you get an error 7 if you're flashing from a clean wipe, if that's the case you can either:
A. flash again, check to see there is no errors.
B. boot to system and set things up; then reboot back to recovery and flash it again (so that the symbolic links are in place), you might need to root it before flashing it.
Latest Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Consider getting the xMIUI Module to customize your experience and support SolarWarez.
Click to expand...
Click to collapse
Thanks for sharing bro. Does this rom includes Multi-Lang (I´m looking for spanish)?
Regards
jorvacf said:
Thanks for sharing bro. Does this rom includes Multi-Lang (I´m looking for spanish)?
Regards
Click to expand...
Click to collapse
Is based on xiaomi.eu and is the Spanish language.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
Is based on xiaomi.eu and is the Spanish language.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Thank you bro. Have you tried it? It is very stable?
All xiaomi betas are stable for everyday use without problems.
I have used them in my redmi note 3 and when I have the bootloader unlocked in my Mi Note 2 I will also use it.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
All xiaomi betas are stable for everyday use without problems.
I have used them in my redmi note 3 and when I have the bootloader unlocked in my Mi Note 2 I will also use it.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok bro, thanks for the answer. About 4 days ago I sent the request to unlock the phone but until now I didn´t receive an answer . My phone has a fake rom I don´t know if this means that is unlocked. Do you know something about this?
Thanks
They are celebrating the Chinese New Year, so be patient ... my cell phone also came with a fake ROM and locked, and I had to change it with My PC Suite, but the Chinese version.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
They are celebrating the Chinese New Year, so be patient ... my cell phone also came with a fake ROM and locked, and I had to change it with My PC Suite, but the Chinese version.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok bro, so if I want to install a rom from xiaomi.eu or the one that edmondt shared I still need to unlock the phone right?
Yes, that is.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
Yes, that is.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Thank you bro!
Hi everyone. I was just wondering if anybody has had success with passing safetynet with a custom rom?
JollyDrifter said:
Hi everyone. I was just wondering if anybody has had success with passing safetynet with a custom rom?
Click to expand...
Click to collapse
Yeah safteynet passes on NOS with latest magisk
passes on latest aospext with magisk (clean flash)
AravindhStanley said:
Yeah safteynet passes on NOS with latest magisk
Click to expand...
Click to collapse
Nope safety net profile mismatch
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Nope safety net profile mismatch
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
use this guide you will bypass cts profile mismatch error
https://forum.xda-developers.com/galaxy-s6/general/guide-bypass-safetynet-mm-custom-rom-t3534709
[email protected] said:
use this guide you will bypass cts profile mismatch error
https://forum.xda-developers.com/galaxy-s6/general/guide-bypass-safetynet-mm-custom-rom-t3534709
Click to expand...
Click to collapse
This guide works on Nougat ? , The procedure is way too complicated & the device is S6 . Explain what you've done on kenzo & on what rom ?
Sent from my Redmi Note 3 using Tapatalk
it only materrs if you have installed custom kernel. the main problem is selinux permissive and enforcing just change it also do as it said it in guide
Safety net passes without any issues. Nitrogen os with magisk 11.1 @VaibhavKumar07
https://forum.xda-developers.com/showpost.php?p=71406128&postcount=1148
Have a look. It works properly and passed the safety net check.
I'm using stable NOS , disabled USB debugging View attachment 4072749
Sent from my Redmi Note 3 using Tapatalk
Stock kernel , no custom kernel is installed
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:30 AM ---------- Previous post was at 09:42 AM ----------
Selinux status is permissive by default , I changed it to enforcing and then tried but no luck . Tried to change enforcing 640 & policy 440 but then automatically selinux changes to permissive ?
Sent from my Redmi Note 3 using Tapatalk
anybody able to bypass saftynet in rr
android_smater said:
anybody able to bypass saftynet in rr
Click to expand...
Click to collapse
Yes passed once on stock kernel with magisk
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Yes passed once on stock kernel with magisk
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
How ?
Clean flash RR , disable inbuilt root go to bin & xbin folders delete su folder using file manager in Twrp next reboot recovery n flash magisk
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Clean flash RR , disable inbuilt root go to bin & xbin folders delete su folder using file manager in Twrp next reboot recovery n flash magisk
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
already clean flash and no su in latest rr
Su , I meant inbuilt root haha
Sent from my Redmi Note 3 using Tapatalk
milav said:
passes on latest aospext with magisk (clean flash)
Click to expand...
Click to collapse
What was your procedure for flashing aosp extended and magisk
Can someone tell me what is safetynet? Because i see it in magisk manager and i dont know what it is...
tom jp said:
What was your procedure for flashing aosp extended and magisk
Click to expand...
Click to collapse
official unlock
flashing of latest miui beta through edl mode
flashing custom recovery (dadi-sometimes i encounter problems or alka-most stable but language settings needed)
wipe data
advance wipe everything
reboot recovery
flash aospext
flash opengapps (aroma)
flash magisksu 11.1
reboot
install magisk manager
shutdown debug
enable magisk hide
check safetynet
voila
Hi have my New OP7T pro, rooted with magisk.
Under magisk manager app I installed YouTube vanced and the process went ok. However, nothing happens, I mean, I still have regular YouTube app.
Is there any other trick I have to use?
I remember when I installed this module in my previous phone (OP5t) I had to do the install process in twrp. But now, since I dont have twrp, there must be another way...
Any help?
Enviado do meu HD1910 através do Tapatalk
Have you?:
- Activated YouTube vanced under Magisk modules
- & re-started the device
you need to find a way to uninstall the updates of the stock youtube app, go to app drawer, long press youtube app, app info, advanced, app details and uninstall
Thank you.
Its all ok now
Enviado do meu HD1910 através do Tapatalk
salomaoa said:
Thank you.
Its all ok now
Enviado do meu HD1910 através do Tapatalk
Click to expand...
Click to collapse
Did YT vanced install work okay for you via Magisk?
No fastboot bootloops/ problems?
So far, I've only tried to install V4A via Magisk modules - and that got me into a bit of bother.
No, no problems at all
Enviado do meu HD1910 através do Tapatalk
elmor0 said:
Did YT vanced install work okay for you via Magisk?
No fastboot bootloops/ problems?
So far, I've only tried to install V4A via Magisk modules - and that got me into a bit of bother.
Click to expand...
Click to collapse
v4a gives alot of problems, yt venced no, flash it via magisk and delete youtube stock app updates and you are good, also dont update youtube app, never
salomaoa said:
No, no problems at all
Enviado do meu HD1910 através do Tapatalk
Click to expand...
Click to collapse
Working fine - thanks.
Relieved that no bootloops.
Is there a way to install Vance's YouTube in other colors? When I was on another flagship and rooted I was able to install Vance's YouTube Blue. It would be cool to be able to do it on our phones.