Anyone managed to change the Mi A3 splash screen? Tried with fastboot flash splash splash.img but the original image doesn't change.
Can someone send me the splash partition? I didn't backup :crying:
To dump the partition run as root: cat /dev/block/bootdevice/by-name/splash > /sdcard/splash.img
Thanks
How did you changed that ?
I'm trying to find a way but didn't.
How to edit that file ?
AgentW said:
How did you changed that ?
I'm trying to find a way but didn't.
Click to expand...
Click to collapse
I couldn't change anything either
AgentW said:
How to edit that file ?
Click to expand...
Click to collapse
I forgot to backup the partition, so I don't know how the original file looks like
mistt said:
I couldn't change anything either
I forgot to backup the partition, so I don't know how the original file looks like
Click to expand...
Click to collapse
I'm trying to change it but after rebooting the device it changes it to the stock.
Please pm me in telegram then I will send you stock splash partition.
It's about 32MB and I can't upload it here.
Tg: @knuckout
https://androidfilehost.com/?fid=4349826312261707481 Original splash is empty.
adeii said:
Original splash is empty.
Click to expand...
Click to collapse
I suspected it was empty :/
I found some bitmaps inside the imagefv partition.
The partition is a signed UEFI PI Firmware Volume. I'm still trying to figure out how to recreate the partition image with new bitmaps.
mistt said:
Anyone managed to change the Mi A3 splash screen? Tried with fastboot flash splash splash.img but the original image doesn't change.
Click to expand...
Click to collapse
already I contacted a dev, soon he will finish the personalized boot logo soon
nelinthon said:
already I contacted a dev, soon he will finish the personalized boot logo soon
Click to expand...
Click to collapse
I'm trying to do that too.
May you tell me his contact info ?
AgentW said:
I'm trying to do that too.
May you tell me his contact info ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/member.php?u=5540721
any news?
Related
Can someone please post the O2 ext. Rom splash image?
Thx!
Here it is!!
?
Does anyone know how to change this? I'd like to change my boot (the first image you see when turning on the power) image, but can't figure out how to do it.
Mr.P said:
Here it is!!
Click to expand...
Click to collapse
It's very Good,Thanks a lot.
anyone find a way to change the splash image? i tried to use the method from the sensation.... but it failed lol any ideas?
alx294 said:
anyone find a way to change the splash image? i tried to use the method from the sensation.... but it failed lol any ideas?
Click to expand...
Click to collapse
I am a newb... is this different than bootanimation?
yeah, the splash image is the white screen with HTC in green, its the first thing you see when starting up, the boot animation is the 2nd one, in this case, its T-Mobile and an android blasting off (stock). I'm trying to change the first one.
alx294 said:
anyone find a way to change the splash image? i tried to use the method from the sensation.... but it failed lol any ideas?
Click to expand...
Click to collapse
It's going to fail because the partitions are different.
Binary100100 said:
It's going to fail because the partitions are different.
Click to expand...
Click to collapse
haha yeah figured that out... what partition is our splash image in?
Here is my collection of bootlogos made for myself, I used this guide - [UTILITY][GUIDE]Exploring Param.lfs and hence changing Boot Logo
Just flash through revovery and reboot
Screenshots and Downloads in attachments
Also check this post
wow
really love joke nd batman on starup screen.
Dark Knight Begins said:
really love joke nd batman on starup screen.
Click to expand...
Click to collapse
Added new batman logo, check op
SG3 said:
Added new batman logo, check op
Click to expand...
Click to collapse
how to change dpi using android?
Dark Knight Begins said:
how to change dpi using android?
Click to expand...
Click to collapse
You have to edit ro.sf.lcd_density in build.prop
SG3 said:
You have to edit ro.sf.lcd_density in build.prop
Click to expand...
Click to collapse
for a bootlogo i need 70dpi
how will i make that.
Dark Knight Begins said:
for a bootlogo i need 70dpi
how will i make that.
Click to expand...
Click to collapse
For which bootlogo
SG3 said:
For which bootlogo
Click to expand...
Click to collapse
like u did in this bootlogo.
how can i replace bat with my pic.
Dark Knight Begins said:
like u did in this bootlogo.
how can i replace bat with my pic.
Click to expand...
Click to collapse
Send your picture, i can do it for you.
Bootlogos updated
SG3 said:
Send your picture, i can do it for you.
Click to expand...
Click to collapse
I just want that name (YEASIN MEHEDI) written on bootlogo.
I liked first one
Dark Knight Begins said:
I just want that name (YEASIN MEHEDI) written on bootlogo.
Click to expand...
Click to collapse
Unzip file then in pic folder delete the logo.jpg and paste your picture, rename it to logo.jpg, zip two folders which you extracted earlier
SG3 said:
Unzip file then in pic folder delete the logo.jpg and paste your picture, rename it to logo.jpg, zip two folders which you extracted earlier
Click to expand...
Click to collapse
tried.
blackscreen when booting
Dark Knight Begins said:
tried.
blackscreen when booting
Click to expand...
Click to collapse
Ok send your photo i will try to create.
New bootlogos
SG3 said:
New bootlogos
Click to expand...
Click to collapse
phone bricked hard.
i put my pic on the zip nd flashed.
suddenly my phone stopped showing logo nd not booting.
just a white screen.
only download mode works.
but when i flashed stock rom it still just the same.
stopped on white screen.
now i need a odin flashable bootlogo.
please help me outta here.
Dark Knight Begins said:
phone bricked hard.
i put my pic on the zip nd flashed.
suddenly my phone stopped showing logo nd not booting.
just a white screen.
only download mode works.
but when i flashed stock rom it still just the same.
stopped on white screen.
now i need a odin flashable bootlogo.
please help me outta here.
Click to expand...
Click to collapse
If you read the thread, using which the zips are created, you will see that only images with 72dpi is supported.
I guess, you used a image with higher dpi.
For now, flash stock ROM using odin, to bring back things to normal.
Anyway, flashing wrong bootlogo shouldn't hardbrick your phone, its just that you wont be able to see any bootlogo, but normal reboot should proceed then after.
corphish said:
If you read the thread, using which the zips are created, you will see that only images with 72dpi is supported.
I guess, you used a image with higher dpi.
For now, flash stock ROM using odin, to bring back things to normal.
Anyway, flashing wrong bootlogo shouldn't hardbrick your phone, its just that you wont be able to see any bootlogo, but normal reboot should proceed then after.
Click to expand...
Click to collapse
Yes it happened with me also after using a pic of higher dpi and recovered it after flashing other bootlogo with 72dpi.
Dark Knight Begins said:
phone bricked hard.
i put my pic on the zip nd flashed.
suddenly my phone stopped showing logo nd not booting.
just a white screen.
only download mode works.
but when i flashed stock rom it still just the same.
stopped on white screen.
now i need a odin flashable bootlogo.
please help me outta here.
Click to expand...
Click to collapse
Its not hardbricked.
Simply remove battery, wait 5 minutes, insert battery again and try to boot in recovery then flash other bootlogo
It worked for me.
Hello, I need urgent help. I accidentally wiped my persist partition and now the phone won't boot up. It just shows boot logo, then powers off, then back to the boot logo, and on and on. Someone help me out of this.
Ronny Say said:
Hello, I need urgent help. I accidentally wiped my persist partition and now the phone won't boot up. It just shows boot logo, then powers off, then back to the boot logo, and on and on. Someone help me out of this.
Click to expand...
Click to collapse
Did you solved it?
SubwayChamp said:
Did you solved it?
Click to expand...
Click to collapse
no, I'm still stuck. I downloaded fastboot rom but could not find persist image in the images folder
Ronny Say said:
no, I'm still stuck. I downloaded fastboot rom but could not find persist image in the images folder
Click to expand...
Click to collapse
This is a persist image I have handy, from an ENG ROM, in case sometime I need it, I didn't use it myself, Let me know if it works.
Nobody should give you the persist.img because it contains private & unique id of each device
Ronny Say said:
Hello, I need urgent help. I accidentally wiped my persist partition and now the phone won't boot up. It just shows boot logo, then powers off, then back to the boot logo, and on and on. Someone help me out of this.
Click to expand...
Click to collapse
I wonder how did you "accidentally wipe" your persist partition
SubwayChamp said:
This is a persist image I have handy, from an ENG ROM, in case sometime I need it, I didn't use it myself, Let me know if it works.
Click to expand...
Click to collapse
I followed some flashing tutorial online and ended up making the problem worse. Took it to the Care center yesterday, said they'd fix it, but I'll probably have to pay coz warranty won't cover that
Ronny Say said:
I followed some flashing tutorial online and ended up making the problem worse. Took it to the Care center yesterday, said they'd fix it, but I'll probably have to pay coz warranty won't cover that
Click to expand...
Click to collapse
You may solve it flashing an ENG firmware, probably.
See post by JimmyTian on Oneplus 11 Forum:Post Link
Could someone with an original Oneplus 11R (CPH2487) with root access help extract and share their ocdt.img
Using ADB:
Code:
adb shell
su
dd if=/dev/block/bootdevice/by-name/ocdt of=/sdcard/ocdt.img
exit
EDIT: CPH2487 ocdt.img #1 added (not working, need another img for byte comparison)
simima30 said:
See post by JimmyTian on Oneplus 11 Forum:Post Link
Could someone with an original Oneplus 11R (CPH2487) with root access help extract and share their ocdt.img
Using ADB:
Code:
adb shell
su
dd if=/dev/block/bootdevice/by-name/ocdt of=/sdcard/ocdt.img
exit
Click to expand...
Click to collapse
Thanks for the help, just wanted to make sure you have the original Indian variant of 11R?
simima30 said:
Thanks for the help, just wanted to make sure you have the original Indian variant of 11R?
Click to expand...
Click to collapse
dump made from original 11r indian version , not ace2 with Oxygen.
unsubscribe about the result after flashing ocdt img
before flashing the new ocdt.img, do not forget to backup your old one on Ace2
Rastatorba said:
before flashing the new ocdt.img, do not forget to backup your old one on Ace2
Click to expand...
Click to collapse
Yep. Noted with thanks.
Rastatorba said:
dump made from original 11r indian version , not ace2 with Oxygen.
unsubscribe about the result after flashing ocdt img
Click to expand...
Click to collapse
What do you mean by unsubscribe?
simima30 said:
Yep. Noted with thanks.
What do you mean by unsubscribe?
Click to expand...
Click to collapse
about the result, whether it helped or not.
Ah okay, sure. I'll try to get it done within 3 weeks. Meanwhile, anyone who attempts it beforehand please let us know the results.
simima30 said:
Ah okay, sure. I'll try to get it done within 3 weeks. Meanwhile, anyone who attempts it beforehand please let us know the results.
Click to expand...
Click to collapse
please give it a try sooner, this could be a life saver for many of us
After flash global ocdt - screen not showing anything, but phone is booting
I reboot phone to bootloader (on screen still nothing) and just restore original ocdt
GTAstar said:
After flash global ocdt - screen not showing anything, but phone is booting
I reboot phone to bootloader (on screen still nothing) and just restore original ocdt
Click to expand...
Click to collapse
that's too bad, i was hoping it would solve the screen flicker for good
GTAstar said:
After flash global ocdt - screen not showing anything, but phone is booting
I reboot phone to bootloader (on screen still nothing) and just restore original ocdt
Click to expand...
Click to collapse
Did you flash it in both fastbootd and fastboot enhance?
simima30 said:
Did you flash it in both fastbootd and fastboot enhance?
Click to expand...
Click to collapse
Yes
After trying - phone stop powering on, official flash through edl don't recognise phone
How can I enter fastboot mode when I reach the recovery screen and select the language, but there is no fastboot option available?
Use ADB on your pc while connecting your phone to it.
Just follow this post: Link
waiting for the solution
Dude, what you guys need is that same file but from Color OS, because it could be hardware difference too... And it works normally on Color OS for this model, so it should technically work, if it is compatible with Oxygen OS
We need the odct.img file of original 11R OxygenOS devices. We can obtain the ColorOS IMG already.
jopac84 said:
Dude, what you guys need is that same file but from Color OS, because it could be hardware difference too... And it works normally on Color OS for this model, so it should technically work, if it is compatible with Oxygen OS
Click to expand...
Click to collapse
I thought the issue is caused by ODCT not flashing when we flash Color OS to Oxygen OS.
leo52307 said:
I thought the issue is caused by ODCT not flashing when we flash Color OS to Oxygen OS.
Click to expand...
Click to collapse
Which is why we need the OxygenOS OCDT file.
But I'm wondering why @Rastatorba OCDT not working