Related
Hello,
After having flash KERNEL_B360a_TOUCH_FIX.img to solve a problem of mount with TWRP on my Honor 9 stf-l09, here I am completely blocked,
When i access TWRP, the screen hangs on teamwin, so I restart the laptop, I waited on "your device has been unlocked and can not be trusted", I do POWER to boot normally and I stumble upon Huawei eRecovery
He offers me: Download latest version and recovery, reboot and shutdown, when I go to Download latest version and recovery it connects to my wifi but still it marks that it does not work ..
I followed this tutorial https://forum.xda-developers.com/honor- ... k-t3696892
I took the last link STF-L09 C432B130 Belgium Germany France Netherlands Portugal Switzerland Spain Italy Austria Bosnia and Herzegovina Poland Denmark Finland Czech Lithuania Romania Serbia Slovenia Hungary Android 7.0 EMUI 5.1
I did as agreed, create the dload folder at the root of my sdcard with inside UPDATE.APP
I did Vol + and - + POWER to install and it marks: Software install failed!
What can I do ? Thank you
What firmware version were you on before flashing KERNEL_B360a_TOUCH_FIX.img ?
Nougat service repair firmware won't work over oreo.
You pasted wrong your link.
Hello,
I used this link https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
Yeah, won't work if you were already on oreo.
For the firmware I think it's Android Oreo on Honor 9 (EMUI 8.0) so I have to redo the manipulation with this version ?
I' m guessing you flashed B360 kernel over a B362 kernel partition.
But you could have done something else wrong.
Would you have a link? What should I install?
Don't rush.
When you access TWRP, the screen hangs on teamwin, so you restart. Could you WAIT more when you fell it hangs ? and what twrp version are you using ?
About your kernel flashing ; could you post here the command you used ?
version twrp: stf-twrp-zxz-0.3.img
I waited 10 minutes but nothing.
For the kernel i used fastboot flash kernel KERNEL_B360a_TOUCH_FIX.img
So assuming you flashed B360 kernel over a B362 kernel partition ;
Just flash this stock B362 kernel over your kernel partition to solve your booting problems :
https://mega.nz/#!bdEgiIAJ!sfkzPeBBKVeDzB2ifsczFxJHrKF8JWY1WP1a8PH9fFg
with :
' fastboot flash kernel Stock_KERNEL_STF-L09C432B362.img '
How to fastboot adb on my computer because normally I had to authorize the connection with my honor 9?
Connect your phone to computer via USB.
Hold Volume.down and keep holding it.
Power off phone, then power on while still keeping Vol.down held until you're in bootloader mode aka fzstboot mode.
This should boot you into fastboot mode where you can issue these commands :
fastboot devices
fastboot flash kernel Stock_KERNEL_STF-L09C432B362.img
My phone is USB connected to the PC, I'm in fastboot & rescue mode: Phone unlocked and unlock
On my computer, when I do adb devices it does not detect my phone but when I do fastboot flash kernel .. it marks
target reported download size of 471859200 bytes
sending 'kernel' (24576 KB) ...
OKAY [0.526s]
writing 'kernel' ...
OKAY [0.263s]
finished. total time: 0.792s
Then I did fastboot reboot and it did not solve the problem.
http://prntscr.com/jarq6a
Deadfightmc said:
My phone is USB connected to the PC, I'm in fastboot & rescue mode: Phone unlocked and unlock
On my computer, when I do adb devices it does not detect my phone
Click to expand...
Click to collapse
fastboot is not adb.
adb is not fastboot.
Deadfightmc said:
but when I do fastboot flash kernel .. it marks
target reported download size of 471859200 bytes
sending 'kernel' (24576 KB) ...
OKAY [0.526s]
writing 'kernel' ...
OKAY [0.263s]
finished. total time: 0.792s
Then I did fastboot reboot and it did not solve the problem.
http://prntscr.com/jarq6a
Click to expand...
Click to collapse
So you successfully flashed via fastboot a C432B362 stock kernel over C432B360 kernel fix and it's still bootlooping...
Do you think your region cust may have been something else than European C432 ? Maybe : Japanese C635 ? Russian C10 ?
Download again stf-twrp-zxz-0.3.img and try to flash your non-working twrp with :
fastboot flash recovery_ramdisk stf-twrp-zxz-0.3.img
I downloaded and flash again stf-twrp-zxz-0.3.img but it still hangs on "teamwin" Should I test all possible kernels?
If your bootloops really appeared because you flashed B360kernelfix, flashing the stock kernel of your actual version will solve your issue.
But, before that, does twrp was working ? What do you call 'a problem of mount with twrp' ?
-I'll say user problem- [emoji14]
I wanted to install SuperSU with twrp so I put it on my sdcard, I installed it with twrp but there was an error so I looked at this link https://forum.xda-developers.com/honor-9/development/oreo-t3754483
problems:
Mount system rw
Custom kernel required because of Huawei MMC protection (check second post)
And there he said Download kernel http://www.mediafire.com/file/6n1wfb..._TOUCH_FIX.img
Flash with fastboot.exe kernel flash KERNEL_B360a_TOUCH_FIX.img
So:
1. system and twrp 0.3 were working.
2. you flashed a 'random' supersu via twrp and it gave you errors
3. you flashed B360kernelfix
Am I right ?
Yes that's it
So first we'll try to fix what you did when you flashed a bad supersu (which one ?) by flashing a stock B360 boot image :
fastboot flash ramdisk STF-L09_ramdisk.img
https://forum.xda-developers.com/attachment.php?attachmentid=4420592&d=1518680458
Hi there
I think my phone is briked. I wantet to downgrade my phone to the 108 version becaus there was android auto working.
So i tried to flash the System.img from the 108 Software. I tried 2 different:
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-lx1&firmware_page=0
and the Middle east from the thread here.
Id did flash over fastboot, but after every start the Build number was still on the 112 Firmware.
So i tried the Trebel ASOP, RR and LOS. ASOP Booted but had only forceclose on every service. RR and LOS did not work.
Then i tried to flash the ramdisk, recovery, vendor kernel etc from the update.app from the 108 Firmware. No my phone is briked.
I tried to flash eveyrthing from the .112 updateapp from the Official thread but nothing happend.
Then i tried to flash every possible .img file from the .112 app but most of them gave "Error Command not allowed"
So here i Am. Bootlooping phone and i dont know what else to do.
Since the beginning i could flash every system.img but it still was on the 112 Build and suddenly it bricked. I cant get to the 112 Version back with flashing system.img because it bootloops. Same for Treble and the newest 126 Version or the old 108 Build.
The only thing booting is ASOP Treble but i cant navigate coz of the 1000 of forceclosed errors.
I formated the userpartition as i was asked from Huawei, and bevore i did those installations i did a fullwipe with EMUI.
The Recovery cant connect to the server, and yeah.. i dont know what to do next. ofc i have unlocked bootloader. I bought the Phone in Switzerland with Dual Sim. ANE-LX1.
Does anyone have another idea?
Cheers
EDIT:
After 10000 billions klicks i managed to get through the treble wizzard, even when the com.android.phone has stopped is comming every second.
At the Moment im in the About Phone Screen and i see this: (I am in the newest ASOP Treble SU with gapps)
Model: ANE-LX1
Android Version 8.1
Baseband: unknown
Kernel Version 4.4.23+ (gcc version 4.9x 20150123 (prerelease) (GCC))
Fri Mar 9 09:51:47 CST 2018
Build Number ANE-LX1 8.0.0.112(c432) <------- WTF ?!?
I hope this informations is something to work with.
SIM CARD is not readable.
Edit2:
I connected it to HI SUit. It says my device running properly on the .112 Version (WTF i got Treble installed)
I cant connect anything. How the hell can i get rid of this ****ing wong Build number??
Same for Checking Updates. .112 should be newest (its not its 126) Any ideas?
Edit3:
Can only Flash with fastboot. Twrp cant mount the partitions. Trying to installing the zip or adb sideload gives me an error code or command not allowed :\
i think the best way is
download a FULL-Update for your build
https://forum.xda-developers.com/9-lite/help/huawei-honor-firmware-download-t3790327
read this https://forum.xda-developers.com/hon...flash-t3778085
if you understand and have the know how : good luck
with this way i have my Ho9L reflash to stock-rom
you have to know what you're doing
use Magisk (search inside xda the thread)
this work by me better as SuperSU (with less problem's)
use this twrp, it's work WITH encryption
ttps://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
if you understand what i am write - you can reset your phone to "delivered-state" and beginning by zero (initial-setting's) and
what ever you flash - you have a chance to reset your phone
first look on bootloader-screen if
- bootloader unlocked
- FRP unlock
THIS is essential !
last tip: let the fingers from custom-rom if this not expressly build for OREO
OREO is other as NOUGAT ! very different !
Relock your bootloader before trying an Erecovery...
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
I'm getting this error when I'm trying to extract UPdate.app of anE-LX1 8.0.0.108(C185)
https://ibb.co/k0HmGy
haidermiz said:
I'm getting this error when I'm trying to extract UPdate.app of anE-LX1 8.0.0.108(C185)
https://ibb.co/k0HmGy
Click to expand...
Click to collapse
go to settings, untick all options that have "verify" in it, and try extract again.
heindrix said:
go to settings, untick all options that have "verify" in it, and try extract again.
Click to expand...
Click to collapse
thanks it worked
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
When i did fastboot flash vendor vendor.img it says
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460706 KB)...
OKAY [ 18.084s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
haidermiz said:
When i did fastboot flash vendor vendor.img it says
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460706 KB)...
OKAY [ 18.084s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
Click to expand...
Click to collapse
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
heindrix said:
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
Click to expand...
Click to collapse
Tried then phone was stuck at installing update 5% after 5 mins there was a screen android written on it then again it booted to erecovery i factory reset data, wiped cache then again it rebooted and it's finally open now thanks
heindrix said:
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
Click to expand...
Click to collapse
I did that a installed stock rom after that I tired to reset data it said failed, it failed at 20% then I WIPED CHAHE and now when It opened I sign in and downloaded snapchat but it's noy opening and in settings about phone there's no model number mentioned it says unknown I don't know what to do
haidermiz said:
I did that a installed stock rom after that I tired to reset data it said failed, it failed at 20% then I WIPED CHAHE and now when It opened I sign in and downloaded snapchat but it's noy opening and in settings about phone there's no model number mentioned it says unknown I don't know what to do
Click to expand...
Click to collapse
if you could, please provide screenshot so i can see it more clearly.
after you flashing the rom, one thing you must do is to format the data and cache through emui erecovery, as long as you're not format the data and cache successfully, the rom will not works properly.
for another reference, please refer to my other post here : https://forum.xda-developers.com/ma...0-pro-help-t3776050/post76916307#post76916307
heindrix said:
if you could, please provide screenshot so i can see it more clearly.
after you flashing the rom, one thing you must do is to format the data and cache through emui erecovery, as long as you're not format the data and cache successfully, the rom will not works properly.
for another reference, please refer to my other post here : https://forum.xda-developers.com/ma...0-pro-help-t3776050/post76916307#post76916307
Click to expand...
Click to collapse
Greetings, I downloaded the rom of my Huawei p20 EML-L09 and it has two Update.app
How and in what order should I install them?
Udpate.app that weighs 4.62gb and
update_EML-L09_hw_la.app which weighs 1.5gb
Thanks a lot.
ajbn7 said:
Greetings, I downloaded the rom of my Huawei p20 EML-L09 and it has two Update.app
How and in what order should I install them?
Udpate.app that weighs 4.62gb and
update_EML-L09_hw_la.app which weighs 1.5gb
Thanks a lot.
Click to expand...
Click to collapse
Hi,
this guide is two years old, if you want to recover your phone, download Service ROM from androidhost.ru website, and flash it using dload method .
Which EMUI version are you running? Your region is C605 ?
-Alf- said:
Hi,
this guide is two years old, if you want to recover your phone, download Service ROM from androidhost.ru website, and flash it using dload method .
Which EMUI version are you running? Your region is C605 ?
Click to expand...
Click to collapse
Correct, my region is 605. I already downloaded the latest version available for download on that page which is 8.1.
Before my phone went into brick, it had version 9.1
And bring those two update.app
ajbn7 said:
Before my phone went into brick, it had version 9.1
Click to expand...
Click to collapse
For 9.1 you can download
https://androidhost.ru/2bCG
Unpack .zip archive , find dload file and simply transfer it to the SD card, without unpacking it! (instructions can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo.
Note: Service ROM L-29 contains both version - L-29 & L-09 .
-Alf- said:
For 9.1 you can download
https://androidhost.ru/2bCG
Unpack .zip archive , find dload file and simply transfer it to the SD card, without unpacking it! (instructions can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo.
Note: Service ROM L-29 contains both version - L-29 & L-09 .
Click to expand...
Click to collapse
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Are there any risks if I try to install version 8.1?
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
ajbn7 said:
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Click to expand...
Click to collapse
Are you sure?
I'm really sorry, but most of the packages are universal.
ajbn7 said:
Are there any risks if I try to install version 8.1?
Click to expand...
Click to collapse
It may brick your phone definitively.
ajbn7 said:
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
Click to expand...
Click to collapse
Yes, you can.
ajbn7 said:
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Are there any risks if I try to install version 8.1?
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
Click to expand...
Click to collapse
Okay, I definitely don't get the 9.1 for Eml-09 for free.
So last query (I hope), what is less risky, install Rom 8.1 which is for my region and exact model, or install Rom 9.1 with my region but for model L-29 or install a Rom 9.1 for my model but with a different region?
Thank you for your support.
ajbn7 said:
what is less risky?
Click to expand...
Click to collapse
L29 EMUI 9.1 C605. Even if it succeeds the phone will not work correctly.
Most probably you will get the wrong model or in build number "system_0.46 (xxxx)" . HiSuite will not recognize your device (and no OTA update).
Hello, I have bricked my phone when I was trying to go back to stock firmware from RR.
TWRP does not work for me, internal storage can not be read (even though I've tried all images I've found for this phone..) so I had to do it through fastboot and hwota.
Somehow it bricked the phone and I get
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 7 (teeos image)
Error NO: 1 (security verify failed!)
If I extract TEEOS.img from UPDATE.app (8.0.0.145(C432)) and try
fastboot flash teeos TEEOS.img
I get
FAILED (remote: command not allowed)
I've tried to flash
SYSTEM.img
RECOVERY_RAMDIS.img
RAMDISK.img
If anyone know what I can do to fix this please enlighten me..
monsterkaka said:
Hello, I have bricked my phone when I was trying to go back to stock firmware from RR.
TWRP does not work for me, internal storage can not be read (even though I've tried all images I've found for this phone..) so I had to do it through fastboot and hwota.
Somehow it bricked the phone and I get
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 7 (teeos image)
Error NO: 1 (security verify failed!)
If I extract TEEOS.img from UPDATE.app (8.0.0.145(C432)) and try
fastboot flash teeos TEEOS.img
I get
FAILED (remote: command not allowed)
I've tried to flash
SYSTEM.img
RECOVERY_RAMDIS.img
RAMDISK.img
If anyone know what I can do to fix this please enlighten me..
Click to expand...
Click to collapse
Can you still get a bootloader mode?
If you still get bootloader enough to fix it.
This job must be solved on DC Phoenix Only
I'm sucess with this link
https://www.******.com/recover-huawei-bricked-devices-dc-phoenix/
I accomplished these images. ..good luck..
My device : huawei nova 2i [RNE-L22]
You can try this:
https://forum.xda-developers.com/showpost.php?p=74853704&postcount=91
Im not sure why is was removed from first post...?
taddzio said:
You can try this:
https://forum.xda-developers.com/showpost.php?p=74853704&postcount=91
Im not sure why is was removed from first post...?
Click to expand...
Click to collapse
I payed for funkyhuawei... it fixed the recovery. I now have a working eRecovery and recovery but failed to download OS. I will try hwota method. Does it work with 8.0.0.145(c432)??
Just download the official files and run?
The download link seem to be removed
monsterkaka said:
I payed for funkyhuawei... it fixed the recovery. I now have a working eRecovery and recovery but failed to download OS. I will try hwota method. Does it work with 8.0.0.145(c432)??
Just download the official files and run?
Click to expand...
Click to collapse
Can you fix it?? Please let me know how you do it?? I´m in the same situation
ï have the same problem please add me on discord if you can help i will reward you Moose#9703
Salutations!
I accidentally flashed a new recovery.img into my ramdisk partition and now my custom recovery won't boot.
Any suggestions?
Running MorFuZ by Catuva21, EMUI 8.0.0 and it has the OEM unlocking greyed out so can't flash another using Fastboot as it results in a CMD error.
Hi, Android 9.0 for Albus is available here >> Direct Download <<
Just install with ADB Fastboot
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase carrier
fastboot erase DDR
fastboot reboot
Ps: Clean Install is recommend
(Retail version)
Enjoy!!!
I'AM NOT RESPONSIBLE IF YOUR CELLPHONE TURNS IN A BRICK AFTER THIS PROCESS
I think you have to do a twrp backup and then restore it.it's strange but works
Inviato dal mio GT-N5120 utilizzando Tapatalk
can we use this update for the Indian version of Z2play, software channel: RETIN. Bootloader: locked. if yes, then is there any problem with the mobile network?
JulioCeesarC said:
Hi, Android 9.0 for Albus is available here >> Direct Download <<
Just install with ADB Fastboot
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase carrier
fastboot erase DDR
fastboot reboot
Ps: Clean Install is recommend
(Retail version)
Enjoy!!!
I'AM NOT RESPONSIBLE IF YOUR CELLPHONE TURNS IN A BRICK AFTER THIS PROCESS
Click to expand...
Click to collapse
I blindly flashed the above mentioned pie rom on my moto z2 play xt1710-02 it flashed gpt and bootloader and failed the rest of the commands returned with errors
Now stuck at fastboot mode warning of startup failed @JulioCeesarC
Please help me get out of here
Bootloader is locked and i was at latest oreo update probably ods27.12-42-14
I also tried to flash above oreo image but it returns with error saying security downgrade
junejo46726 said:
I blindly flashed the above mentioned pie rom on my moto z2 play xt1710-02 it flashed gpt and bootloader and failed the rest of the commands returned with errors
Now stuck at fastboot mode warning of startup failed @JulioCeesarC
Please help me get out of here
Bootloader is locked and i was at latest oreo update probably ods27.12-42-14
I also tried to flash above oreo image but it returns with error saying security downgrade
Click to expand...
Click to collapse
try to install 8.0 again and after that unlock bootloader and try to install 9.0 again with bootloader unlocked
ghost.deathrider said:
can we use this update for the Indian version of Z2play, software channel: RETIN. Bootloader: locked. if yes, then is there any problem with the mobile network?
Click to expand...
Click to collapse
I recomend bootloader unlocked for this process
junejo46726 said:
Hi, Android 9.0 for Albus is available here >> Direct Download <<
Just install with ADB Fastboot
I blindly flashed the above mentioned pie rom on my moto z2 play xt1710-02 it flashed gpt and bootloader and failed the rest of the commands returned with errors
Now stuck at fastboot mode warning of startup failed @JulioCeesarC
Please help me get out of here
Bootloader is locked and i was at latest oreo update probably ods27.12-42-14
I also tried to flash above oreo image but it returns with error saying security downgrade
Click to expand...
Click to collapse
Before you unlock:
Try fastboot "Boot" TWRP, if you can, it might be possible to use one of the TWRP backups to fix your phone. There is another thread with TWRP backups of stock.
If successful boot, restore system partition last and separately.
XT1710-09 bootloader unlocked, installed 9.0 without any issue! Everything ok with twrp-3.2.3-0-albus recovery, but got bootloop trying to root with Magisk 20.0. Any tip?
kain83 said:
XT1710-09 bootloader unlocked, installed 9.0 without any issue! Everything ok with twrp-3.2.3-0-albus recovery, but got bootloop trying to root with Magisk 20.0. Any tip?
Click to expand...
Click to collapse
did you try cleaning your cache? I used 19.3.
kewlzter said:
did you try cleaning your cache? I used 19.3.
Click to expand...
Click to collapse
I didn't indeed. I'm gonna give it a try, thanks
EDIT: it works!! So installed 19.3 version and wiped cache/dalvik, then reboot. So far so good, many thanks!!
keeps saying waiting for device
hindraftv said:
keeps saying waiting for device
Click to expand...
Click to collapse
Phone is either not connected, or in the wrong mode.
Make sure the phone is in Boot Loader. Unplug and replug USB.
ghost.deathrider said:
can we use this update for the Indian version of Z2play, software channel: RETIN. Bootloader: locked. if yes, then is there any problem with the mobile network?
Click to expand...
Click to collapse
Yes, i tried both the US version and the Brazil version and the Brazil version works. I'm on Vodafone India and everything works perfectly fine on android pie.
However, after several trials and errors, I realized there are two commands that you shouldn't run when flashing pie on the Indian variant. They are:
1) flashboot erase userdata
2) flashboot erase carrier
Special Thanks to @Junior Passos
reallydan said:
Yes, i tried both the US version and the Brazil version and the Brazil version works. I'm on Vodafone India and everything works perfectly fine on android pie.
However, after several trials and errors, I realized there are two commands that you shouldn't run when flashing pie on the Indian variant. They are:
1) flashboot erase userdata
2) flashboot erase carrier
Special Thanks to @Junior Passos
Click to expand...
Click to collapse
Clean flash or dirty flash?
rayudu123 said:
Clean flash or dirty flash?
Click to expand...
Click to collapse
Clean flash
reallydan said:
Clean flash
Click to expand...
Click to collapse
Is it possible to flash indian pie version after release of pie in india??? Or do we face any problem in flashing??
Everything works except dark theme. Any fix?
kewlzter said:
Phone is either not connected, or in the wrong mode.
Make sure the phone is in Boot Loader. Unplug and replug USB.
Click to expand...
Click to collapse
It is connected.. I have Moto Z2 Play - Build Number OPSS27.76.12-42-13 (Baseband M8953P_50.59.07.96 ALBUS_NA_CUST_
are you able to provide step by step guide, if you don't mind
hindraftv said:
It is connected.. I have Moto Z2 Play - Build Number OPSS27.76.12-42-13 (Baseband M8953P_50.59.07.96 ALBUS_NA_CUST_
are you able to provide step by step guide, if you don't mind
Click to expand...
Click to collapse
Why sure...
Step 1: you get yourself a usb cable.
Step 2: you plug one end into your computer.
Step 3: plug the other end into your phone..
glad to help
kewlzter said:
Before you unlock:
Try fastboot "Boot" TWRP, if you can, it might be possible to use one of the TWRP backups to fix your phone. There is another thread with TWRP backups of stock.
If successful boot, restore system partition last and separately.
Click to expand...
Click to collapse
I also tried but fastboot saying can not load twrp @JulioCeesarC