i cant flash my my phone using bootloader,cause my pc can't detect the device in fast boot mode,so is there any other way to install cusom rom?
Maverick 101 said:
i cant flash my my phone using bootloader,cause my pc can't detect the device in fast boot mode,so is there any other way to install cusom rom?
Click to expand...
Click to collapse
Try to check if your Fastboot drivers are installed correctly or not. Go to Device Manager in Your PC Properties and check whether your device is showing there in Fastboot mode or not? Only then you can unlock your bootloader and after unlocking you'll be able to proceed to Install and flash TWRP and Custom ROM's
No it doesn't!!! That's why i am searching for another way,
Maverick 101 said:
No it doesn't!!! That's why i am searching for another way,
Click to expand...
Click to collapse
Try Installing this.
https://forum.xda-developers.com/showthread.php?t=2588979
Tried it but it doesn't work
You need to connect your phone to usb 2.0 ports on your pc for the Mi Unlock / Flash tool to detect your phone in fastboot mode. If you don't have a usb 2.0 port, a usb 2.0 hub will also work.
Hope this helped.
Tried 2.0 also but no luck.
Maverick 101 said:
Tried 2.0 also but no luck.
Click to expand...
Click to collapse
It's just a connectivity issue, uninstall the drivers and retry everything from the start watching some guide on youtube.
It is normal, it happens some time, there is no other way to install twrp.
Related
I apologize for making this thread again as I misunderstood my device name previously (I thought it's a Play but it's a Ray)
http://forum.xda-developers.com/showthread.php?p=49236873
Is there any way for this device to unlock bootloader without connecting to the pc?
I can access fastboot (the blue light) but my pc doesn't say anything nor the device show up in device manager when connected, Flashtool doesn't detect anything.
Is there a way to install ROM without connecting to the computer, only accessing fastboot?
Thank you.
pinmemo said:
I apologize for making this thread again as I misunderstood my device name previously (I thought it's a Play but it's a Ray)
http://forum.xda-developers.com/showthread.php?p=49236873
Is there any way for this device to unlock bootloader without connecting to the pc?
I can access fastboot (the blue light) but my pc doesn't say anything nor the device show up in device manager when connected, Flashtool doesn't detect anything.
Is there a way to install ROM without connecting to the computer, only accessing fastboot?
Thank you.
Click to expand...
Click to collapse
I think there is No..way to unlock BOOTLOADER without connecting to pc..
Do U have fastboot drivers installed ????
If NOT ...then download this, then extract. and replace with that one in sdk (u need
to have Android sdk installed, if not
search google & install) http://
www33.zippyshare.com/v/22861267/
file.html
switch off phone then connect to PC by holding vol up key ur Pc ask for drivers ..
Then go to device manager find ur device right click on it and update driver by using that file which u extract in sdk and select boot loader interface ...Done...
Now do the process of unlocking Bootloader...
iF u don't want to unlock BOOTLOADER then install any custom rom based on ur stock rom via Cwm .....
DastanShaikh said:
I think there is No..way to unlock BOOTLOADER without connecting to pc..
Do U have fastboot drivers installed ????
If NOT ...then download this, then extract. and replace with that one in sdk (u need
to have Android sdk installed, if not
search google & install) http://
www33.zippyshare.com/v/22861267/
file.html
switch off phone then connect to PC by holding vol up key ur Pc ask for drivers ..
Then go to device manager find ur device right click on it and update driver by using that file which u extract in sdk and select boot loader interface ...Done...
Now do the process of unlocking Bootloader...
iF u don't want to unlock BOOTLOADER then install any custom rom based on ur stock rom via Cwm .....
Click to expand...
Click to collapse
My phone doesn't ask for any driver at all, much like it has never connected.
How can I install cwm without unlocking bootloader?
thanks mate.
Download XParts from playstore and you'll instal cwm
Sent from my WT19a with Next Gen V8 Rom using Xda App :good:
Membrillo007 said:
Download XParts from playstore and you'll instal cwm
Sent from my WT19a with Next Gen V8 Rom using Xda App :good:
Click to expand...
Click to collapse
Next roadblock then, how can I root the phone without a usb cable? I have sdcard and know how to place files there. Is there anyway to work around this??
unlockbootloader.sonymobile.com
Isnt it easiest method?
pinmemo said:
Next roadblock then, how can I root the phone without a usb cable? I have sdcard and know how to place files there. Is there anyway to work around this??
Click to expand...
Click to collapse
No, that's not possible
I guess you should try reinstalling all drivers from flashtool for all devices, or try installing PC Companion or SEUS. If that's not working, open the windows device manager and uninstall/update the drivers for your phone when it's connected
Sent from my Nexus 4 running Android 4.4
mihahn said:
No, that's not possible
I guess you should try reinstalling all drivers from flashtool for all devices, or try installing PC Companion or SEUS. If that's not working, open the windows device manager and uninstall/update the drivers for your phone when it's connected
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
thanks i'll try
pinmemo said:
Next roadblock then, how can I root the phone without a usb cable? I have sdcard and know how to place files there. Is there anyway to work around this??
Click to expand...
Click to collapse
Use eroot to root ur device easily..but drivers must be installed..
And if u want to root ur device without using computer u should give a try to Framaroot...
Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.
Is there a way to root my phone without a pc?
When i connect my phone to my pc it will charge but it isn't recognized by the PC.
thanks
borgami said:
Is there a way to root my phone without a pc?
When i connect my phone to my pc it will charge but it isn't recognized by the PC.
thanks
Click to expand...
Click to collapse
No. You should install the drivers then your phone should be recognised, follow the root guide in this forum.
Sent from my Elephone P9000 using XDA Labs
Jonny said:
No. You should install the drivers then your phone should be recognised, follow the root guide in this forum.
Sent from my Elephone P9000 using XDA Labs
Click to expand...
Click to collapse
I installed the drivers but i couldn't see it in device driver.
borgami said:
I installed the drivers but i couldn't see it in device driver.
Click to expand...
Click to collapse
tbh the drivers are very temperamental, as I have windows 10 I had to restart the Pc disabling the driver enforcement. I had the same issue as yourself but I uninstalled and reinstalled and fiddled around a bit to get the drivers to work.
Now they are installed with no issues.
I actually used the "SP_Driver_v2.0" .. found HERE
I have also noted that another driver (Driver_Auto_Installer_v1.1236.00.zip) is HERE but I think I had issues with that driver (dont know why)
The SP_Driver_v2.0 worked for me .. hope you get it sorted, i know how frustrating it is ;0)
Technically you can perfectly root without PC. But you need to have a custom recovery on your phone. To get the custom recovery, you need to flash it, using a PC.
But once you have the recovery, rooting does not require a PC, just the su binary.
If windows isn't recognizing your device at all, it might be a bad USB cable? I had issues with windows - ended up using linux.
i used SP_Driver_v.2.0 but doesn't work for me for preload, i connect my device and in device managment it is with triangle and it disconnects after 2~3 seconds and goes in offline charging. is there any preload driver for win 10 64 bit that actually works?
Same problem with my P9000.
Unable to get SPFT to see my device.
Tried hours, disabling driver signature, secure boot, many different drivers and SPFT versions.
It's frustrating. Can't update OTA to 20160810 version, FOTA installed firmware from july and tells me it's up to date.
Can i install newest firmware without PC and no custom recovery from device storage?
Last month I accidentally deleted twrp from my phone by flashing a corrupt file, so i was stuck in lineage os, today I when I wanted to factory reset my phone, it booted to fastboot mode, now when I connect it with my laptop, it says usb device not recognized and when I type fastboot device in cmd nothing happends. Please help.
Change usb port use usb 2.0 not 3.0, does it say fastboot in your device still?
redjavla said:
Last month I accidentally deleted twrp from my phone by flashing a corrupt file, so i was stuck in lineage os, today I when I wanted to factory reset my phone, it booted to fastboot mode, now when I connect it with my laptop, it says usb device not recognized and when I type fastboot device in cmd nothing happends. Please help.
Click to expand...
Click to collapse
Check the AMD Ryzen Fastboot Fix Guide and then Clean Install Custom ROM Guide in my POCO F1 Ultimate Collection & Guides thread.
Kenora_I said:
Change usb port use usb 2.0 not 3.0, does it say fastboot in your device still?
Click to expand...
Click to collapse
I used both nothing chqnges.
Yeah it still says fastboot.
Retrial said:
Check the AMD Ryzen Fastboot Fix Guide and then Clean Install Custom ROM Guide in my POCO F1 Ultimate Collection & Guides thread.
Click to expand...
Click to collapse
But my laptop is an intel.
I've been attempting to recover my samsung galaxy A8 from a brick, by flashing the original firmware for 3 days. I successfully got TWRP flashed, and couldn't connect to the phone using MTP, so I ended up using an SD card to transfer the firmware zip. Long story short, I tried to treble it, and it completely bricked, leaving me without TWRP, or anything to boot.
I've put it in download mode, swapped through 10 different USB C cables, and still can't get my PC to recognize it. I've tried two computers, one running arch linux, and the other one through windows 10 and arch linux. Nothing. Whenever I run "lsusb" I can't see the phone. I also can't see it in device manager.
windowsagent said:
I've been attempting to recover my samsung galaxy A8 from a brick, by flashing the original firmware for 3 days. I successfully got TWRP flashed, and couldn't connect to the phone using MTP, so I ended up using an SD card to transfer the firmware zip. Long story short, I tried to treble it, and it completely bricked, leaving me without TWRP, or anything to boot.
I've put it in download mode, swapped through 10 different USB C cables, and still can't get my PC to recognize it. I've tried two computers, one running arch linux, and the other one through windows 10 and arch linux. Nothing. Whenever I run "lsusb" I can't see the phone. I also can't see it in device manager.
Click to expand...
Click to collapse
have you tried flashing it as update via sideload in adb ?
do you have the latest samsung drivers installed ?
try using my tool located here
gav83collins said:
have you tried flashing it as update via sideload in adb ?
do you have the latest samsung drivers installed ?
try using my tool located here
Click to expand...
Click to collapse
I'm stuck without TWRP, so I can't adb sideload. I did try it back when TWRP did boot, but it still didn't recognize it (I tried lsusb and adb devices)
windowsagent said:
I'm stuck without TWRP, so I can't adb sideload. I did try it back when TWRP did boot, but it still didn't recognize it (I tried lsusb and adb devices)
Click to expand...
Click to collapse
you dont need twrp to sideload, you can do it via adb, my tool above will guide you through the process
gav83collins said:
you dont need twrp to sideload, you can do it via adb, my tool above will guide you through the process
Click to expand...
Click to collapse
I'll try to do it then, while in download mode. Thanks!
windowsagent said:
I'll try to do it then, while in download mode. Thanks!
Click to expand...
Click to collapse
my tool will boot you into download mode when necessary. just follow the onscreen instructions
gav83collins said:
my tool will boot you into download mode when necessary. just follow the onscreen instructions
Click to expand...
Click to collapse
My device is just not listed. I see it's just running adb devices, and nothing shows up.
windowsagent said:
My device is just not listed. I see it's just running adb devices, and nothing shows up.
Click to expand...
Click to collapse
Plus I've already got all the drivers installed.
windowsagent said:
Plus I've already got all the drivers installed.
Click to expand...
Click to collapse
you havent got your phones settings for usb set to "charge only" have you ?
gav83collins said:
you havent got your phones settings for usb set to "charge only" have you ?
Click to expand...
Click to collapse
My phone doesn't boot. I deleted the system partition. It's on a bootloop, and the only thing I can do is access download mode.
I was able to plug it in. I used the sim card remover to try to clean up the port.. I'm seriously an idiot...
windowsagent said:
I was able to plug it in. I used the sim card remover to try to clean up the port.. I'm seriously an idiot...
Click to expand...
Click to collapse
so even in download mode, my tool doesnt detect it ? what about in device manager ? does it show up in there ? are you running a windows machine or windows via a virtual machine
Hi so im having a almost same situation here with my a8 2018 so it seems on the phone that it was doing an update and failed and cant boot to android (i think it got corrupted or something) i can access the samsung recovery but if i do reboot or any data deletion i cant get it to work i tried installing twrp recovery but im a biginer and well idk how to do it from the adb update option
ocasds said:
Hi so im having a almost same situation here with my a8 2018 so it seems on the phone that it was doing an update and failed and cant boot to android (i think it got corrupted or something) i can access the samsung recovery but if i do reboot or any data deletion i cant get it to work i tried installing twrp recovery but im a biginer and well idk how to do it from the adb update option
Click to expand...
Click to collapse
update: i managed to get twrp installed
also i found out i need to install new android so if you can link me something good for the a8 2018 i would be gratefull