baseband help request - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

at the origin, there was firmware HC 3.0.1 ver. XXKI1 (Vodafone).
later I downloaded original samsung firmware P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 (4.0.4 ITV) and table works fine, I browse in 3G really fine.
later I needed Nougat, then I updated my device by following thread:
https://forum.xda-developers.com/ga...stable-7-1-setup-google-voice-bigger-t3768344
tablet is rooted, twrp 3.11 installed.
almost everything works fine, the modem hooks the carrier of Vodafone Italy but only in GSM mode and I can receive only SMS.
nothing to do for browsing in 3G.
does a solution exist to browsing in 3G with Nougat with Vodafone Italy?
does a nice person exist who suggests me a work-around, an engineering code to modify baseband or have I to resign?
thanks, thanks, thanks

Related

Error 155 during firmware update T-mobile G2

I have tried several times to do a firmware update for the T-mobile G2 (Dutch version). I don't think there is any difference between the dutch or the english version.
Everything goes until the firmware updates really starts. I get a message bootloader starts over again! and then that the firmware update fails.
My G2 has been rooted, but i turned all back to the original backup. (I Think)
Modelnr: T-Mobile G2 Touch
Firmwareversion: 1.5
Smallbandversion: 63.18.55.06EU_6.35.06.18
Buildnr: 1.76.110.6 146733 CL#47214
Softwareversion: 1.0.0.A6288
Is there anyone who can help me so that i can use the firmware update. I hear a lot of complaint over this update, but I need to be able to acces a WiFi network.
Are you using the RUU process? If so, it's probable that it is failing the CID check as you are T-Mobile NL rather than T-Mobile UK (though I'd expect to see a message to that effect!).
What is wrong with your WiFi?
Regards,
Dave
My problem with the wifi is that i can't setup security certificates. I read that it become possible from the new firmware.
Someone told me it was possible to install the T-mobile UK version. But then i have to wait until the dutch supported version. Thank you for your response.
aimer32 said:
My problem with the wifi is that i can't setup security certificates. I read that it become possible from the new firmware.
Click to expand...
Click to collapse
I believe that is part of Donut, and not in the current update ROMs. However, if you install a rooted ROM, it is possible that this app may help:
http://www.cyrket.com/package/fan.Wifi
To reiterate - you *MUST* have a rooted ROM in order to use this application.
Regards,
Dave

[US GENERIC E5506] Problem finding 5.1.1 FW update after flashing back to 5.0

Hello and thank you greatly for taking the time to read my thread, your help and wisdom is greatly appreciated.
I will provide a short and long summary of the events that unfolded with my US GENERIC/UNBRANDED [Amazon.com] SONY Xperia C5 Ultra [E5506]
Short:
I need to update from 5.0 to 5.1 but can't seem to via OTA/Sony PCC despite being able to previously. Is there a way to do this, and preferably, not lose my data [as when I updated from 5.0 to 5.1 before with Sony PCC]
Long:
Initially I had no problems updating my phone using Sony PC Companion to 5.1.1, but I also had no root access at the time and didn't know of any exploits/etc to gain root that were available.
I ended up on 5.1.1 and after some time used KINGROOT to root followed by SUPER-SUME Pro to try and switch root management software from the sketchy KINGROOT to SuperSU by chainfire.
SUPER-SUME Pro failed on step 2 of 2, and afterwards I had severe problems with my SD card applications and random phone restarts and "Optimizing apps... 1 of 246" Before this however 5.1.1 was working great.
I tried to factory reset but I didn't know about Xperia's anti theft protection and it had an error on 5.1.1 where upon trying to un-lock the phone from the Xperia website or device itself would fail.
On the device it would display "Xperia Care has crashed." when trying to authenticate the user.
I read that this was a common issue with C4/C5 devices running 5.1.1 and that many foreign users were having to ship their phone to USA Texas repair centers.
Instead of this I read and followed a guide on using XperiFirm+FlashTool to flash the original 5.0 back to the device. After this the phone was still in Xperia LOCKDOWN mode, but Xperia Care didn't crash and I was able to update my phone using my google account login.
The firmware I flashed was
Code:
Device: Xperia C5 Ultra (E5506)
CDA: 1299-5697
Market: USA
Operator: Customized US
Network: GENERIC
Release: 29.0.A.1.55 / R1A
Size: 1.31 GB
The problem I'm now having is that neither my phone via OTA, Sony PC Companion, or XperiFirm seem to have an R1A US update available from 29.0.A.1.55 / R1A [Android 5.0] to 29.1.A.0.87 / R1A [Android 5.1.1]
They all report that my 5.0 install is the latest version, and via the XperiFirm tool there is no other firmware listed other than the 29.0.A.1.55 / R1A [Android 5.0]
At this point I don't care about root so much as just being able to get back to 5.1.1 from 5.0.
Is there any assistance that anyone can provide? I have tried to find a 5.1.1 firmware to flash but all are other regions. Is there anyway to get Sony PCC to update or find the update OTA? I'm confused as to why the update seems to be missing for the US region when my phone is a US model and had the update before.
I was also hoping there was a way if I do find the firmware that I could flash it w/o losing application/user data, as I already extensively set everything up again.
Thanks again so much for reading and I greatly appreciate any wisdom the XDA-Dev forum has for me.
[I had screenshots of XperiFirm/Phone Info/PCC but I can't have outside links in my post as I'm a new forum member]
I flashed the Canadian WIND CA 29.1.A.0.87 R3A firmware (as I figured this was the closest thing to a US region firmware if there was differences) via FlashTool and didn't wipe Data and everything seems to be working great so far, back to the improved speed and lower system memory footprint that Lollipop 5.1 offered.
Hello again,
Does anyone have a copy of the Android 5.1 US Generic CDA 1299-5697 29.1.A.0.87 firmware? I can't find it on xperifirm, and ended up having to flash the WIND CA Canadian branded 5.1 when re-flashing 5.1 on my phone because the xperifirm 5.0 stated no updates available despite my US Generic branded C5 Ultra having previously updated fine through Sony PCC. :/
Having trouble finding it and now it despites my data plan is HSPA+/4G instead of LTE. Any ideas?
Wind in Canada is a 3G only carrier, and they don't enable LTE in their firmware.
How would I go about flashing a firmware that has LTE enabled if I can't find the US Generic firmware on xperifirm? Is there another 5.1 fw that would be safe?
Darkshades said:
How would I go about flashing a firmware that has LTE enabled if I can't find the US Generic firmware on xperifirm? Is there another 5.1 fw that would be safe?
Click to expand...
Click to collapse
In a rush so this will be short.
1. Flash back to stock US 5.0 full .tft
2. Next flash any 5.1 tft using only system.sin and boot.sin re-read/see my #1 post in the Flashtool thread for instruction. :good:
NOTE to ALL:
STOP FLASHING THE ENTIRE .TFT's THERE IS NO NEED UNLESS YOU HAVE A BRICK :laugh:
Thank you so much for your quick response;
I did this [Flashed US stock 5.0, then just the system/boot from 5.1] and instead of displaying "4G" at the top when connected to data it now displays "H+"; is this AT&T LTE? I tried googling a bunch of information but got a lot of different answers.
I feel like when I was originally on the US 5.0>5.1 that Sony PCC installed [before the root incident/flash back to 5.0>Wind 5.1] that it said LTE at the top but maybe I just imagined it? Thanks again so much for taking time out of your day to help me, it's greatly appreciated. _(._.)_
EDIT: Just downloaded LTE On Off from the google play store and set the preferred network to LTE and it's showing LTE connection now, I did a speed test using speedof.me/m/, is 10 Mbps down / 2.7 Mbps up sound accurate for LTE?
Darkshades said:
Thank you so much for your quick response;
I did this [Flashed US stock 5.0, then just the system/boot from 5.1] and instead of displaying "4G" at the top when connected to data it now displays "H+"; is this AT&T LTE? I tried googling a bunch of information but got a lot of different answers.
I feel like when I was originally on the US 5.0>5.1 that Sony PCC installed [before the root incident/flash back to 5.0>Wind 5.1] that it said LTE at the top but maybe I just imagined it? Thanks again so much for taking time out of your day to help me, it's greatly appreciated. _(._.)_
EDIT: Just downloaded LTE On Off from the google play store and set the preferred network to LTE and it's showing LTE connection now, I did a speed test using speedof.me/m/, is 10 Mbps down / 2.7 Mbps up sound accurate for LTE?
Click to expand...
Click to collapse
I am not too sure about the US "LTE" or what all the bands mean in the US as they are very confusing
From my memory I seem to recall someone explaining about how at&t use a combo two 2/3G bands and call it LTE (4G) band ???? and 1700 I think
Sorry I can't be more helpful but you may get some better info from a US user. :fingers-crossed:
US version 5.1 is available now.
mingkee said:
US version 5.1 is available now.
Click to expand...
Click to collapse
need link for any 5.1 firmware, no matter if US, canada or LA, since I need to downgrade one to try removing XTP.
thanks

[HELP] 925I updated to 7.0... no network connectivity

Hello!
I just updated my 925I (Mexico-Telcel) from MM to N and found out that after that I get no carrier connectivity, wifi works fine. Update was done through smart switch and noticed that imei doesn't match with the one on the back of the phone.
I've always tinkered with my phones and the one time I didn't, it bit me in the ass.
Anyway,
Baseband version is G925IDVU3FQF3
Build Number is NRD90M.G925IDVU3FQF7
I've been reading and reading but so far, I don't know if I can flash an unbloated version (925F) or not or if I can flash only the MM modem in hopes for the problem to be solved.
Any advice will be appreciated.

Oreo for Hong Kong Region is out!

https://www.sammobile.com/firmwares/galaxy-c7/SM-C7000/TGY/download/C7000ZHU3CRI5/236514/
But it might be t-mobile rom. I flashed one of open china oreo roms (and it was awesome except chinese stuff) and when i was downgrading i chose the lastest 7.0.
When i flashed the firmware, i realized that it was a t-mobile rom and had t-mobile's settings section (i couldn't even get signal).
Can someone confirm that this is not a t-mobile rom?
No its not tmobile i have updated via software upadte ota. It works fine. No signal problem.C7000ZHU3CRI5
since .i updated my device to oreo my fingerprint sensor is not working.i have tried to flash but i cant enter odin mode as well.any suggesions plz
since i update my c7000 to 8.0 oreo android it has been freezing but my task will keep on working normal but i cant operate until i press the lock key and open it back again. Astime goes on the level of it freezing become frequent what should i do please

Question Flashing UK version of XQ-BC52 on TW XQ-BC72 (.oem files for Volte & Wifi Calling)

Hi Everyone,
Can anyone help me with process for flashing UK version firmware of XQ-BC52 on Taiwan version of XQ-BC72. I need to know which firmware files such as ".ta" or any other files to be removed from firmware folder before flashing. The UK or US customization versions supports volte and Wifi calling in my country.
Currently the Taiwan firmware version is at 61.0.A.23.20 (android 11) and UK firmware version is at 61.1.A.2.211 (android 12)
Can I just flash the .oem files of UK firmware to TW firmware?. But, since device firmware versions are different, flashing may fail and corrupt the device. Can you confirm if this is safe to flash?.
Request your help!
ralf_waldo said:
Hi Everyone,
Can anyone help me with process for flashing UK version firmware of XQ-BC52 on Taiwan version of XQ-BC72. I need to know which firmware files such as ".ta" or any other files to be removed from firmware folder before flashing. The UK or US customization versions supports volte and Wifi calling in my country.
Currently the Taiwan firmware version is at 61.0.A.23.20 (android 11) and UK firmware version is at 61.1.A.2.211 (android 12)
Can I just flash the .oem files of UK firmware to TW firmware?. But, since device firmware versions are different, flashing may fail and corrupt the device. Can you confirm if this is safe to flash?.
Request your help!
Click to expand...
Click to collapse
I think yes but r u sure that customized UK fw supports voLTE and WIFI calling? the switches are in the settings? because I have the same model but with eea customized and have no volte or/and vowifi switches.... My carrier supports them btw
I've been told the customised SEA also has Volte and VoWifi wnabled, but I never got any joy out of it when I flashed it into my HK BC72 device. I have tried the previous firmware revision of the UK one, but nothing there either.
Ndlelex said:
I've been told the customised SEA also has Volte and VoWifi wnabled, but I never got any joy out of it when I flashed it into my HK BC72 device. I have tried the previous firmware revision of the UK one, but nothing there either.
Click to expand...
Click to collapse
So if I flash it to my XQ-BC52 will it affect anything? I don't want to lose anything, but I want to use volte I have no idea why it isn't enabled when all of the carriers on my country support it
I would first update it to the newest TW Firmware and check if it works (so you can update, without loosing personal data).
If it still doesn't work, I would try the HK firmware, because of Over-The-Air–Updates (OTA). I have VoLTE and VoWifi in Switzerland with this firmware.
If it still doesn't work, try the BC-52 firmwares (but you loose OTA Updates).
Please just check after flashing a new firmware if you have the functions. If it works, first do a repair with Sony Companion before starting to install everything (like apps, files....). This makes a clean install and avoids a lot potential of failures/problems.
I bought the phone in Etoren and it is the model XQ-BC72, I live in the UK, and the update I received via OTA and is installed is 61.1.A.2.211 release-keys. you shouldn't, I guess Sony recognizes you're in the UK and installs the correct one
LaceeWearsPrada said:
So if I flash it to my XQ-BC52 will it affect anything? I don't want to lose anything, but I want to use volte I have no idea why it isn't enabled when all of the carriers on my country support it
Click to expand...
Click to collapse
You won't lose your data if you explicitly tell it not to clear userdata off your phone, if that's what you mean. If, however, you're referring to certain functionalities I sometime hear of getting lost, then I myself haven't noticed such with all versions of firmware I have tried out so far.
PlatinCH said:
I would first update it to the newest TW Firmware and check if it works (so you can update, without loosing personal data).
If it still doesn't work, I would try the HK firmware, because of Over-The-Air–Updates (OTA). I have VoLTE and VoWifi in Switzerland with this firmware.
If it still doesn't work, try the BC-52 firmwares (but you loose OTA Updates).
Please just check after flashing a new firmware if you have the functions. If it works, first do a repair with Sony Companion before starting to install everything (like apps, files....). This makes a clean install and avoids a lot potential of failures/problems.
Click to expand...
Click to collapse
I've yet to do a clean install, the way you have described it. I guess I'll do it just like that when I've given up on trying to activate VoLTE and VoWifi on my phone. It's interesting that your Hong Kong phone has that function over there. I suppose there is some substance in Sony's insistence that the one's network provider be engaged as well.
I was considering getting the Xperia 1 IV which would be a nice upgrade from my Xperia 1 II but with volte not working it would push me away. I managed to get it working on my Xperia 1 II by simply flashing SEA firmware. It was straight forward and has worked flawlessly with OTA updates. It doesn't look like the Xperia 1 IV will work that way. Even if I was to flash SEA firmware it looks like volte still wouldn't work. Come on Sony sort this problem out

Categories

Resources