Hello
Please help me
I have device rooted
How do I register my phone temporarily or permanently?
I changed imei and S/N but it can't be registrable network mobile SIM card and And I received an SMS from the registry network system that We found the original imei of this phone and wrote the original imei number in the text message will be deactivated with the original factory imei number for the next few days???:crying:
What information and ideas should be changed for the registry?
What parameters does the registry system detect?
Related
asslam o alaikum, and hello brothers and sisters here, i am a new user here. i need help. i have a lenovo A3000-H ideatab. i buy it from china. i do the firmware upgrade from http://forum.xda-developers.com/showthread.php?t=2441135. but the bad thing that happened is, i format and then i download. the problem is that now invalid IMEI..that i fixed it by Engineering coding mode...
'"code in Engineering mode:-"'
Just enter this code in dialler:- *#7465625# or * # * # 3646633 # * # *
Now Tap on Call pad or connectivity option or you have to slide the screen.
Just Look for CDS information (Common data service information) option.
You will see Radio information there and after tapping on it.
If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Now you will have to put your IMEI no in this manner :- “AT +EGMR=1,7,"IMEI_1” and “AT +EGMR=1,10,"IMEI_2” (replace IMEI_1 and IMEI_2 with your IMEI no) and tap on send command button.
for Example :- “AT =EGMR=1,7”9100XXXXXXXXXXXX”"''
( also it will be helpfull for others) please do not misuse it. its just help to solve your problem
the other problem that i fixed it is nvram error= xo1 for wifi mac adress that was formated by me... i just took a data\
nvram\APCFG\APRDEB\wifi from it i copied wifi name document from my friend tab that is same to me and paste it into my tab data\nvram\APCFG\APRDEB\wifi. my tab wifi doc replaced . the NVRAM ERROR=XO1 from wifi gone...
the thing that i need is that when i restore to default after some days to check there were no IMEI . it says invalid IMEI and also the same NVRAMERROR. that i fixed it again by the above method that i explained. then i do firmware upgrade but this time i did not select the format option, i just download.but after finishing firmware upgrade, when i turn on my tab it says INVALID IMEI AND SAME WIFI problem NVRAM ERROR. BUT I WANT THAT is there any method from which if i ever do firmware upgrade or restore default it should be fixed and it will not say INALID IMEI AND NVRAM ERROR. I JUST HATE IT. PLEASE IF ANY ONE HAVE ANY IDEA IT WILL BE A LOT HELP ...
""'''SPECIALLY THIS QUESTION IS FOR AZAM426"""
asslam o alaikum, and hello brothers and sisters here, i am a new user here. i need help. i have a lenovo A3000-H ideatab. i buy it from china. i do the firmware upgrade from http://forum.xda-developers.com/showthread.php?t=2441135. but the bad thing that happened is, i format and then i download. the problem is that now invalid IMEI..that i fixed it by Engineering coding mode...
'"code in Engineering mode:-"'
Just enter this code in dialler:- *#7465625# or * # * # 3646633 # * # *
Now Tap on Call pad or connectivity option or you have to slide the screen.
Just Look for CDS information (Common data service information) option.
You will see Radio information there and after tapping on it.
If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Now you will have to put your IMEI no in this manner :- “AT +EGMR=1,7,"IMEI_1” and “AT +EGMR=1,10,"IMEI_2” (replace IMEI_1 and IMEI_2 with your IMEI no) and tap on send command button.
for Example :- “AT =EGMR=1,7”9100XXXXXXXXXXXX”"''
( also it will be helpfull for others) please do not misuse it. its just help to solve your problem
the other problem that i fixed it is nvram error= xo1 for wifi mac adress that was formated by me... i just took a data\
nvram\APCFG\APRDEB\wifi from it i copied wifi name document from my friend tab that is same to me and paste it into my tab data\nvram\APCFG\APRDEB\wifi. my tab wifi doc replaced . the NVRAM ERROR=XO1 from wifi gone...
the thing that i need is that when i restore to default after some days to check there were no IMEI . it says invalid IMEI and also the same NVRAMERROR. that i fixed it again by the above method that i explained. then i do firmware upgrade but this time i did not select the format option, i just download.but after finishing firmware upgrade, when i turn on my tab it says INVALID IMEI AND SAME WIFI problem NVRAM ERROR. BUT I WANT THAT is there any method from which if i ever do firmware upgrade or restore default it should be fixed and it will not say INALID IMEI AND NVRAM ERROR. I JUST HATE IT. PLEASE IF ANY ONE HAVE ANY IDEA IT WILL BE A LOT HELP ...
""'''SPECIALLY THIS QUESTION IS FOR AZAM426"""
Hello,
after reflashing from android to ubuntu touch, the sim cards were unable to register to the network. Searching I noticed that IMEI numbers were not set. In android there is the engineer mode where someone can set these by getting there.
Is there any way to do it in ubuntu touch, even if I have to edit system files?
thank you.
We are not able to give you information on how to restore IMEI numbers to a handset, as it can be used for nefarious purposes. At least, that was the explanation that I've seen a lot.
Hi every one
I have a question about hidden menu
Like *#06# *#1234#
When i call this code a screen show me value
Like imei,phone version or do something
I have to change value
For example in samsung *#1234# show you rom version and model number you can change it in build number or system apk
But for imei
When i call *#06# i need to mask it and show a custom value! Dont need to change just mask it
This is worked with xposed mudules like imei changer or...
But i need method to mod system apk or system file without any mudules or xposed
Sorry for my bad engilish
Tq
Anyone?!
im trying since few weeks to root or just wright that f***** numbers in my system, i flashed new software and new bootloader but cant register my umidigi f1 play, nothing works i tried nearly every manual/way ive found on the internet. it would be nice if someone spend some hours and do this with teamviewer for me or just create a system image with all my imeis, meid and android seal ... sn write tool always fail, flash twrp or adb debug didnt worked. maybe its the phone or im just not intelligent enough :ß pictures are at my profile ^^
@P41Nkiller
On each Android phone exists the EFS partition where all your important data like the IMEI number, MAC address of all the wireless devices, important files from the internet and product code, MEID, and ESN, registered phone number, etc. are stored.
Flashing a new ROM shouldn't have touched EFS partition.