Related
This is just my guide for updating. i wrote it down because i tend to forget how i did things when i want to do it again.
i am no expert. there could be better ways to do it.
Update after twrp
This includes a factory reset.
Root, TWRP and all your DATA is gone after this.
Do a backup before you do this!!!
1.
Activate usb debugging
Power off the phone completely.
Press and hold the Volume Up and Power button to enter Fastboot mode.
2. fastboot flash recovery stockrecovery.img
3. boot into recovery (volume down+power)
install from SD: UL-ASUS_Z01KD_1-WW-14.1064.1711.96-user.zip
4. start system.
Factory reset
than shut down.
5. boot into recovery (volume down+power)
install from SD: latest update
You could share the file link to flash user.zip?
matracapx said:
You could share the file link to flash user.zip?
Click to expand...
Click to collapse
What do you mean? The firmware? You can download it from the Asus website.
Does anyone know the current procedure for updating the ROM stock via TWRP. It looks like we should download the full updated firmware and the Magisk. Restart on TWRP, and flash the ROM and then the Magisk, one by one. Can anyone confirm?
-------------------------------------------------------------------------------------------------------------------------------------------------------
Alguém sabe o procedimento atual para atualizar a stock ROm via TWRP. Parece que devemos baixar o firmware atualizado completo e o Magisk. Reiniciar na TWRP, e flashear a ROM atulizada e depois o Magisk, um por um. Alguém pode confirmar?
Following...
badvag said:
Does anyone know the current procedure for updating the ROM stock via TWRP. It looks like we should download the full updated firmware and the Magisk. Restart on TWRP, and flash the ROM and then the Magisk, one by one. Can anyone confirm?
-------------------------------------------------------------------------------------------------------------------------------------------------------
Alguém sabe o procedimento atual para atualizar a stock ROm via TWRP. Parece que devemos baixar o firmware atualizado completo e o Magisk. Reiniciar na TWRP, e flashear a ROM atulizada e depois o Magisk, um por um. Alguém pode confirmar?
Click to expand...
Click to collapse
You just answered your own question. That's how it's always been done, doesn't matter whether you got a ASUS Zenphone or a Galaxy S phone from Samsung for that matter.
urbanman2004 said:
You just answered your own question. That's how it's always been done, doesn't matter whether you got a ASUS Zenphone or a Galaxy S phone from Samsung for that matter.
Click to expand...
Click to collapse
I do not know the procedure for updating the ROM by TWRP, do you know? Can you tell me more details?
I want to say that in the normal way I know how to do it, but I'm still not sure how to update the ROM via TWRP without losing Magisk and Xoosed (if you're using it)
badvag said:
I do not know the procedure for updating the ROM by TWRP, do you know? Can you tell me more details?
I want to say that in the normal way I know how to do it, but I'm still not sure how to update the ROM via TWRP without losing Magisk and Xoosed (if you're using it)
Click to expand...
Click to collapse
I use Magisk, but not Xposed. These instructions are based on the assumption that the bootloader is unlocked, and that TWRP is already installed on your device, and that the Rom in question has already been copied to a USB Stick via OTG cable:
01. Boot into Recovery Mode (hold down Volume Down + Power Buttons)
02. Always make a [Nandroid] backup (via USB-OTG, saving data on USB Stick preferably) when going from one Rom to another; Save separate important data (texts, call logs, documents)/apps prior to Rom Install using backup utility apps, e.g., Titanium Backup.
03. Sideload your Rom (via USB-OTG, copied onto USB Stick preferably)
04. Hit WIPE – Do a Factory Reset: Wipe Data /Cache/ Dalvik. Hit Back
05. Hit MOUNT – Mount USB-OTG. Select the storage device. Hit Back
06. Hit INSTALL – Browse for the Rom (zip file). Install Rom
07. Remember to Flash Google Apps
08. REBOOT the System
09. Complete the startup wizard and give the phone a 10 to 15 minutes before the next step.
10. Now reboot into Recovery and flash any mods/theme or kernel compatible with your new ROM.
a. Remember to 'wipe cache/dalvik' after flashing kernel
urbanman2004 said:
I use Magisk, but not Xposed. These instructions are based on the assumption that the bootloader is unlocked, and that TWRP is already installed on your device, and that the Rom in question has already been copied to a USB Stick via OTG cable:
01. Boot into Recovery Mode (hold down Volume Down + Power Buttons)
02. Always make a [Nandroid] backup (via USB-OTG, saving data on USB Stick preferably) when going from one Rom to another; Save separate important data (texts, call logs, documents)/apps prior to Rom Install using backup utility apps, e.g., Titanium Backup.
03. Sideload your Rom (via USB-OTG, copied onto USB Stick preferably)
04. Hit WIPE – Do a Factory Reset: Wipe Data /Cache/ Dalvik. Hit Back
05. Hit MOUNT – Mount USB-OTG. Select the storage device. Hit Back
06. Hit INSTALL – Browse for the Rom (zip file). Install Rom
07. Remember to Flash Google Apps
08. REBOOT the System
09. Complete the startup wizard and give the phone a 10 to 15 minutes before the next step.
10. Now reboot into Recovery and flash any mods/theme or kernel compatible with your new ROM.
a. Remember to 'wipe cache/dalvik' after flashing kernel
Click to expand...
Click to collapse
That way I would lose the Magisk, XPosed and phone settings. When flashing the original ROM, it will overwrite custom recovery (TWRP). I would like to know a way to update the original ROM without losing anything, understand? It is possible?
badvag said:
That way I would lose the Magisk, XPosed and phone settings. When flashing the original ROM, it will overwrite custom recovery (TWRP). I would like to know a way to update the original ROM without losing anything, understand? It is possible?
Click to expand...
Click to collapse
Did you not just read what I took the time to write? If not, you're on your own
urbanman2004 said:
Did you not just read what I took the time to write? If not, you're on your own
Click to expand...
Click to collapse
I read, I should not have understood. Does the procedure you passed do not lose the settings and root (Magisk)?
badvag said:
That way I would lose the Magisk, XPosed and phone settings. When flashing the original ROM, it will overwrite custom recovery (TWRP). I would like to know a way to update the original ROM without losing anything, understand? It is possible?
Click to expand...
Click to collapse
badvag said:
I read, I should not have understood. Does the procedure you passed do not lose the settings and root (Magisk)?
Click to expand...
Click to collapse
I can tell English is not your native language. If you notice under instruction #2:
Always make a [Nandroid] backup (via USB-OTG, saving data on USB Stick preferably) when going from one Rom to another; Save separate important data (texts, call logs, documents)/apps prior to Rom Install using backup utility apps, e.g., Titanium Backup.
Click to expand...
Click to collapse
That implies that your settings will not be saved, and refers you to other means to backup/restore them; a) creating a Nandroid backup within TWRP will backup the OS/Rom (and installed apk's) but no settings, data, files, etc., b) Titanium Backup does a number of things, if not all of what you inquired a/b. I would highly implore you do your research and due diligence before plunging into something blindly that you're not well-versed in which seems to be the case here. Just b/c I mentioned here what is it that I would do in your situation doesn't mean it works best based on your use case scenario. Hope that provides you more, and better clarity.
urbanman2004 said:
I can tell English is not your native language. If you notice under instruction #2:
That implies that your settings will not be saved, and refers you to other means to backup/restore them; a) creating a Nandroid backup within TWRP will backup the OS/Rom (and installed apk's) but no settings, data, files, etc., b) Titanium Backup does a number of things, if not all of what you inquired a/b. I would highly implore you do your research and due diligence before plunging into something blindly that you're not well-versed in which seems to be the case here. Just b/c I mentioned here what is it that I would do in your situation doesn't mean it works best based on your use case scenario. Hope that provides you more, and better clarity.
Click to expand...
Click to collapse
Of course, English is not my native language.
But I had read, I really did not have much practice in doing this by Titanium backup and recovering these settings. My initial question was: Is there any way to flash the updated ROM without losing anything? I realized that there isn't.
how can i find stockrecovery.img ?
euojunior said:
how can i find stockrecovery.img ?
Click to expand...
Click to collapse
i added stock recovery to the first post
https://forum.xda-developers.com/attachment.php?attachmentid=4694253&d=1548542582
joeblond999 said:
i added stock recovery to the first post
https://forum.xda-developers.com/attachment.php?attachmentid=4694253&d=1548542582
Click to expand...
Click to collapse
Thanx Guy God Bless U !!
Thank you ! all happened normally here God bless you !
I'm coming back here to explain how to update the ROM stock using TWRP and the Asus Flash Tool.
Some guys who are experts say it does not work, but there are videos on Youtube showing that it is possible to do the firmware flash directly through TWRP, I did not do it because of the risk of the softbrick.
These are the videos:
https://www.youtube.com/watch?v=HebmIzuAfS0&t=194s
https://www.youtube.com/watch?v=thEDEvA5UUs
https://www.youtube.com/watch?v=nzBQz1x4xfg
It may also be possible for "adb sideload xxxx" in the sideload option of TWRP (use TWRP version 3.2.3, which is hard to find on the internet), I have not tested it.
In my procedure the TWRP will be lost:
1) Download RAW firmware ZE554KL
2) Install ASUS Flash Tool (in version v2.0.1 does not seem to work), I used version v1.0.0.45.
3) Now, with your phone turned on and your debug mode enabled.
4) Open ASUS Flash Tool ((it does not matter if the model of the device is not listed)
5) Select the RAW firmware you've downloaded.
6) Click on the Serial Number of your device.
7) Click Start. I do not remember, but I think now the phone starts with TWRP or you start custom recovery and then put it in FASTBOOT mode (if you do this before Asus FlashTool will not recognize the device).
8)Start the process on the start button (I can not remember if it has to start again), and then the RAW firmware will start to be copied. The phone will reboot again through TWRP, do nothing until the process is finished (check for TWRP and Asus Flash Tool), then just start the device. Recovery will be back to normal and the device will have the firmware updated.
*I could not attach twrp3.2.3 and Asus Flash Tool (v1.0.0.45) because of the size of the files.
badvag said:
I'm coming back here to explain how to update the ROM stock using TWRP and the Asus Flash Tool.
Some guys who are experts say it does not work, but there are videos on Youtube showing that it is possible to do the firmware flash directly through TWRP, I did not do it because of the risk of the softbrick.
These are the videos:
https://www.youtube.com/watch?v=HebmIzuAfS0&t=194s
https://www.youtube.com/watch?v=thEDEvA5UUs
https://www.youtube.com/watch?v=nzBQz1x4xfg
It may also be possible for "adb sideload xxxx" in the sideload option of TWRP (use TWRP version 3.2.3, which is hard to find on the internet), I have not tested it.
In my procedure the TWRP will be lost:
1) Download RAW firmware ZE554KL
2) Install ASUS Flash Tool (in version v2.0.1 does not seem to work), I used version v1.0.0.45.
3) Now, with your phone turned on and your debug mode enabled.
4) Open ASUS Flash Tool ((it does not matter if the model of the device is not listed)
5) Select the RAW firmware you've downloaded.
6) Click on the Serial Number of your device.
7) Click Start. I do not remember, but I think now the phone starts with TWRP or you start custom recovery and then put it in FASTBOOT mode (if you do this before Asus FlashTool will not recognize the device).
8)Start the process on the start button (I can not remember if it has to start again), and then the RAW firmware will start to be copied. The phone will reboot again through TWRP, do nothing until the process is finished (check for TWRP and Asus Flash Tool), then just start the device. Recovery will be back to normal and the device will have the firmware updated.
*I could not attach twrp3.2.3 and Asus Flash Tool (v1.0.0.45) because of the size of the files.
Click to expand...
Click to collapse
Please upload files to google drive? thank you!
matracapx said:
Please upload files to google drive? thank you!
Click to expand...
Click to collapse
Link: https://drive.google.com/open?id=1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
*Reminder: you can recover the original recovery easily. The stock recovery file is also on the link.
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
can you post 6.1plus vendor IMG and boot IMG here please
Or links
pawankonjarla said:
can you post 6.1plus vendor IMG and boot IMG here please
Or links
Click to expand...
Click to collapse
links updated now
BootLoader
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
nikash07 said:
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
Click to expand...
Click to collapse
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Raghu varma said:
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Click to expand...
Click to collapse
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
nikash07 said:
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
Click to expand...
Click to collapse
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Raghu varma said:
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Click to expand...
Click to collapse
I don't think Nokia is going to accept this and flash Oreo just like that.
nikash07 said:
I don't think Nokia is going to accept this and flash Oreo just like that.
Click to expand...
Click to collapse
Bro I updated to pie and went to care point and said some complaints about pie.they finally downgraded my phone . For example tell them Iam not comfort with pie so just flash DRG-229D File using ost. This file belongs to Oreo june security patch .
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Forum Rules said:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Raghu varma said:
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
My Teligram Group Link All Are invited And Feel Free to Ask your Questions MOD EDIT: LINKS REMOVED
My Teligram Channel For the Further Information
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
Click to expand...
Click to collapse
the Doctor said:
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
thanks for the information. I won't repeat this again
thank you very much
Can we unlock now?
And
How to flash stock rom
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
paul89rulez said:
thank you very much
Click to expand...
Click to collapse
Welcome
bbcastro said:
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
Click to expand...
Click to collapse
Well now twrp thread is up in nokia 6.1 kenel and recovery development section check it out
earlier treble gsi's had issues with Nokia phones Sim cards not being detected - has this been resolved, specifically relating to TA-1103?
So should I download From "A" only roms or "A/AB" roms?
Nokia X6 with Custom Oreo ROM - How to load stock Android Pie 6.1 plus image
Hi,
I bought a Nokia X6 in September 2018 (6GB/64GB) and would like to install the Stock Nokia 6.1 Plus Android 9 image.
I see my phone is rooted and it shows the message "Your device has loaded a different operating system." everytime I start it and I have to use Magisk to hide several banking applications.
The phone works great and I knew it was going to be relased in Europe eventually, but I am scared to brick it by loading the Android 9 Image.
I already tried attempting the update through OTA but the zip file is ignored. Nothing happens.
I am new to this forum so I don't know if my question has been asked by someone else.
Can you please help me?
Thank you!
Image size is bigger than target device..
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
---------- Post added at 04:03 PM ---------- Previous post was at 03:28 PM ----------
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
Unfortunately Installed Wrong Codename ROM On My poco f1
after that my device goes in to fastboot mode
and i cannot access recovery mode because fastboot everywhere
if i press volume up + power button = fastboot mode
if i reboot = fastboot mode
if i plug in to charger = fastboot mode
then i flashed mi global stable build from miflash
still device booting in to fastboot mode automatically
after that when i flashed miui 9 device booted up successfully then i updated to miui 10 oreo from system update
but when i try to update miui 10 oreo to pie from ota/twrp/fastboot device automatically booting in to fastboot mode
after that i tried android q dp4 gsi guess what device booted android q gsi successfully
Tested All pie custom roms also same issue
it means i cant install pie
dont know what is happening exactly
DOWNLOAD
"beryllium-9.6.27-9.0-vendor-firmware" AND PUT IT on sdcard/usbotg and FLASH it via TWRP from
https://mirror.akhilnarang.me/MIUI/beryllium/
then flash any pie rome + GAPPS (if needed) +magisk19.3(if you wana root) and reboot
the device will boot
Xiaomi Poco uses Modified Vendor image ! that why it needed to be flashed saperatedly!
check and let me know!
edit1
if you cannot access recovery! BOOT into recovery via fastboot command line (while Poco is connected in Fastboot mode to your PC) and your PC have all driver installed. Open Minimal adb and fastboot
fastboot device // to check connection
fastboot boot ..... and Drag twrp from desktop and DROP it on CMD window ... then ENTER,
your POCO will BOOT, while its on Yellow LOGO, try to put USB OTG drive so that Twrp can READ its contents for you to Flash! , usb otg plugged AFTER twrp boot usually don't get red! ... OR better put flashable zips in sd card using any adaptor
I suffer from the same problem and applied all your steps but go to put fastboot .
please solve this
hekoo1 said:
I suffer from the same problem and applied all your steps but go to put fastboot .
please solve this
Click to expand...
Click to collapse
please xplain more
1. did you flash vendor (latest) ?
2. what rom you are flashing?
3. miui works?
plz explain
yasuhamed said:
please xplain more
1. Did you flash vendor (latest) ?
2. What rom you are flashing?
3. Miui works?
Plz explain
Click to expand...
Click to collapse
1. I flashed vendor 9.6.27-9.0 via recovery
2. I want flash miui 10.3.5 latest
3. Miui android 8.1 working . Android 9 not working
hekoo1 said:
1. I flashed vendor 9.6.27-9.0 via recovery
2. I want flash miui 10.3.5 latest
3. Miui android 8.1 working . Android 9 not working
Click to expand...
Click to collapse
THERE IS NO NEED TO FLASH VENDOR if you going to flash ANY MIUI!
make sure you have correct build/version of MIUI 10.3.5,
some times, if DATA partitions is CORRUPT then click on FORMAT data, type YES and it will wipe the WHOLE device! encryptions will be reset! then place MIUI10.3.5 and check!
remember, to take backups!
if miui 9 has worked then this means the downloaded miui10 is not the correct one!
No I can not.
When installing any system MIUI ANDROID 9 PIE the phone is rebooted to FASTBOOT
---------- Post added at 09:05 AM ---------- Previous post was at 08:55 AM ----------
YasuHamed said:
THERE IS NO NEED TO FLASH VENDOR if you going to flash ANY MIUI!
make sure you have correct build/version of MIUI 10.3.5,
some times, if DATA partitions is CORRUPT then click on FORMAT data, type YES and it will wipe the WHOLE device! encryptions will be reset! then place MIUI10.3.5 and check!
remember, to take backups!
if miui 9 has worked then this means the downloaded miui10 is not the correct one!
Click to expand...
Click to collapse
No I can not.
When installing any system MIUI ANDROID 9 PIE the phone is rebooted to FASTBOOT
PLEASE SOLVE THIS
hekoo1 said:
No I can not.
When installing any system MIUI ANDROID 9 PIE the phone is rebooted to FASTBOOT
---------- Post added at 09:05 AM ---------- Previous post was at 08:55 AM ----------
No I can not.
When installing any system MIUI ANDROID 9 PIE the phone is rebooted to FASTBOOT
PLEASE SOLVE THIS
Click to expand...
Click to collapse
I know this is a longshot but, bro, did you manage to solve the issue? I'm in the same situation and trying to find a solution. Opened a new thread but no help from anywhere... Anyone? Guys?
[QUOTE = "crimsonFay, postagem: 83995307, membro: 10638959"]
Eu sei que é uma hipótese remota, mas, mano, você conseguiu resolver o problema? Estou na mesma situação e tentando encontrar uma solução. Abriu um novo tópico, mas sem ajuda de lugar nenhum ... Alguém? Rapazes?
[/CITAR]
eu tmb estou a meses nessa situação, acho que só flash edl auth l resolver
For People Stuck On Oreo Firmware (Poco F1)
I have seen many people facing this issue where they flashed a OxygenOS rom of different phone ( Due to a idiot youtuber said it can be flashed on all devices ) I recently recieved a POCO F1, with same condition where i cannot update MIUI over...
forum.xda-developers.com
SO finally I successfully rooted with TWRP and root access.thanks to all developers @Eastw1ng @TheMalachite
Following are all download links combined in one post Also there are two threads like unlocking boot loader and twrp but there are some steps are not mentioned which we must need to understand so see the video tutorial at the end of thread.
If you have issues please post comment I will try to solve at my best
NOTE: REMOVE ALL PASSWORD AND PINS ON PHONE BEFORE FLASHING TWRP
All data will be erased so keep backup
Download:
Latest new twrp 3.7 official:
Download twrp-3.7.0_11-0-denniz.img
Download page for twrp-3.7.0_11-0-denniz.img
dl.twrp.me
Vbmeta image:
vbmeta.img | by TheMalachite for OnePlus Nord 2 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Mediatek USB VCom drivers:
MediaTek_Preloader_USB_VCOM_Drivers_Setup_Signed.zip
drive.google.com
ADB AND FASTBOOT DRIVERS(WHEN FASTBOOT NOT DETECTING ONLY)
adb - platform tools v30.0.5.zip | by abdyasar for Utilities
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
magisk v24 zip:
Download Magisk Zip 24.2 Latest Version For Android 2022
Magisk Zip is a flashable file that is used to install Magisk Root on android phones. This Magisk Zip 24.3 latest version can be installed/flashed using
magiskapp.com
magisk 23 apk:
Magisk 23.0 APK Download by topjohnwu - APKMirror
Magisk 23.0 APK Download by topjohnwu - APKMirror Free and safe Android APK downloads
www.apkmirror.com
CMD COMMNADS HIT ENTER:
1)detect adb devices:
adb devices
2)Reboot to bootloader mode:
adb reboot bootloader
3)To detect FASTBOOT devices:
fastboot devices
4)To OEM unlock:
fastboot flashing unlock
5)To flash Vbmeta image:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
6) flash twrp image:
fastboot flash recovery recoveryname.img
7)Reboot from FASTBOOT mode to recovery:
fastboot reboot recovery
If you have any issue follow this tutorial correctly
This worked great! Only problem I had was unlocking the bootloader and flashing TWRP without booting up caused the stock recovery to overwrite it again for some reason. After repeating the steps after unlocking it worked. Also, if you have the same problem as me with Magisk being unable to bypass the safety net, try this:
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
I wish I found this before I sunk hours into learning what build prop editing is
Kenaestic said:
This worked great! Only problem I had was unlocking the bootloader and flashing TWRP without booting up caused the stock recovery to overwrite it again for some reason. After repeating the steps after unlocking it worked. Also, if you have the same problem as me with Magisk being unable to bypass the safety net, try this:
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
I wish I found this before I sunk hours into learning what build prop editing is
Click to expand...
Click to collapse
I already mentioned in the video regarding re-writing of STOCK recovery. For that when we reboot after typing
fastboot reboot recovery
Immediately press volume down+ power button till you saw the recovery name at the bottom om the phone screen and leave the phone it will boots to twrp that's it.
What is vbmeta.ing?
pankspoo said:
I already mentioned in the video regarding re-writing of STOCK recovery. For that when we reboot after typing
fastboot reboot recovery
Immediately press volume down+ power button till you saw the recovery name at the bottom om the phone screen and leave the phone it will boots to twrp that's it.
Click to expand...
Click to collapse
It did boot to TWRP with just the command, though. It just didn't save it for some reason. Still no major problem or anything. Your guide worked in the end and I'm happy ! However I noticed GPS is terrible now for some reason. When I'm on WiFi there's no problems but as soon as I go on mobile data: my weather app can't refresh anymore, Google Maps thinks I'm 50 meters from my actual location and the GPS is always turned 90 degrees away from forward. Is this a common problem?
Kenaestic said:
It did boot to TWRP with just the command, though. It just didn't save it for some reason. Still no major problem or anything. Your guide worked in the end and I'm happy ! However I noticed GPS is terrible now for some reason. When I'm on WiFi there's no problems but as soon as I go on mobile data: my weather app can't refresh anymore, Google Maps thinks I'm 50 meters from my actual location and the GPS is always turned 90 degrees away from forward. Is this a common problem?
Click to expand...
Click to collapse
Root doesn't have to do with these things anymore please check any other app is causing issue
Worked like a charm on a DN2103 OxygenOS v11.3 phone.
Thank you.
@pankspoo how to handle OTA updates? Updater doesn't work anymore with TWRP.
Can I use this titorial for A11?
It
8vasa8 said:
Can I use this titorial for A11?
Click to expand...
Click to collapse
Its the same Process to follow with A11
Cerveza said:
@pankspoo how to handle OTA updates? Updater doesn't work anymore with TWRP.
Click to expand...
Click to collapse
Crested video
Cerveza said:
@pankspoo how to handle OTA updates? Updater doesn't work anymore with TWRP.
Click to expand...
Click to collapse
Creted video in how to section
Ciao, ho effettuato il root del mio telefono con questo metodo (https://forum.xda-developers.com/t/root-tool-oneplus-nord-2-oxygen-11-3-dn2103_11_a-xx-eea.4332959/ ) come Non sono riuscito a installare TWRP. Ora mi chiedo se posso fare la procedura installando TWRP e poi procedere all'upgrade alla versione A.11. Perderò i miei dati? Grazie
caccola69 said:
Ciao, ho effettuato il root del mio telefono con questo metodo (https://forum.xda-developers.com/t/root-tool-oneplus-nord-2-oxygen-11-3-dn2103_11_a-xx-eea.4332959/ ) come Non sono riuscito a installare TWRP. Ora mi chiedo se posso fare la procedura installando TWRP e poi procedere all'upgrade alla versione A.11. Perderò i miei dati? Grazie
Click to expand...
Click to collapse
OTA Update process for rooted nord 2 : Any incremental Thread update Latest Feb 2022
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone. They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth. So here...
forum.xda-developers.com
Use this method to. Upgrade you will not loose data if you already unlocked your bootloadee
pankspoo said:
OTA Update process for rooted nord 2 : Any incremental Thread update Latest Feb 2022
Hi guys so Many users are facing issue while they are rooted and twrp installed on there phone. They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth. So here...
forum.xda-developers.com
Use this method to. Upgrade you will not loose data if you already unlocked your bootloadee
Click to expand...
Click to collapse
Thanks for the answer .... as I said I don't have TWRP. When I tried to install it, after restarting the phone, it was no longer accessible. For this I used the other method for root (I didn't understand how to fix TWRP)
What do you advise me to do?
caccola69 said:
Thanks for the answer .... as I said I don't have TWRP. When I tried to install it, after restarting the phone, it was no longer accessible. For this I used the other method for root (I didn't understand how to fix TWRP)
What do you advise me to do?
Click to expand...
Click to collapse
Did you seen the video after flashing twrp using fastboot you need to type
fastboot reboot recovery and hit enter
You will boot in Twrp and its permenant
pankspoo said:
Did you seen the video after flashing twrp using fastboot you need to tyoe
F
fastboot reboot recovery and hit enter
You will boot in. Twrp and its permenant
Click to expand...
Click to collapse
thanks for your patience but I'm afraid to make a mistake
Do I redo the whole procedure described?
CMD COMMNADS HIT ENTER:
1)detect adb devices:
adb devices
2)Reboot to bootloader mode:
adb reboot bootloader
3)To detect FASTBOOT devices:
fastboot devices
4)To OEM unlock:
fastboot flashing unlock
5)To flash Vbmeta image:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
6) flash twrp image:
fastboot flash recovery recoveryname.img
7)Reboot from FASTBOOT mode to recovery:
fastboot reboot recovery
caccola69 said:
thanks for your patience but I'm afraid to make a mistake
Do I redo the whole procedure described?
CMD COMMNADS HIT ENTER:
1)detect adb devices:
adb devices
2)Reboot to bootloader mode:
adb reboot bootloader
3)To detect FASTBOOT devices:
fastboot devices
4)To OEM unlock:
fastboot flashing unlock
5)To flash Vbmeta image:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
6) flash twrp image:
fastboot flash recovery recoveryname.img
7)Reboot from FASTBOOT mode to recovery:
fastboot reboot recovery
Click to expand...
Click to collapse
Yes correct
pankspoo said:
Yes correct
Click to expand...
Click to collapse
this procedure deleted all my data. I have upgraded the phone to version A.11 and now waiting to figure out how to root
I redid the procedure and in twrp I did a wipe data. I restart twrp and now I see all the memory but I can't copy magisk to the phone and then flash it
Reboot
caccola69 said:
this procedure deleted all my data. I have upgraded the phone to version A.11 and now waiting to figure out how to root
I redid the procedure and in twrp I did a wipe data. I restart twrp and now I see all the memory but I can't copy magisk to the phone and then flash it
Click to expand...
Click to collapse
OEM unlocking always wipes your data no need to mention things again and again.
If you have TWRP first click wipe> format data >yes now reboot back to TWRP again
now click MTP disable and enable it now see if you are able to copy files.
Hi everyone, sorry for my bad english but i sure we can help me to find a PIXEL EXPERIENCE fluid rom for my Xiaomi Mi 11 Lite 5G (8+128).
I searched the entire internet to find the rom but none of that are good for myself.
FCsperimentx said:
Hi everyone, sorry for my bad english but i sure we can help me to find a PIXEL EXPERIENCE fluid rom for my Xiaomi Mi 11 Lite 5G (8+128).
I searched the entire internet to find the rom but none of that are good for myself.
Click to expand...
Click to collapse
you have to take GSI rom here..
You can check my personal PE 12.0 build, been using it for 2 weeks and it works alright not 100% perfect.
Releases · aurotones/renoir
Contribute to aurotones/renoir development by creating an account on GitHub.
github.com
Ho un grosso problema sul mio dispositivo: quando provo a installare una rom personalizzata lo smartphone si blocca sul bootloop e I install again the stock miui con MIFlashTool.
I tried everything but the smartphone still have this problem.
FCsperimentx said:
Ho un grosso problema sul mio dispositivo: quando provo a installare una rom personalizzata lo smartphone si blocca sul bootloop e I install again the stock miui con MIFlashTool.
I tried everything but the smartphone still have this problem.
Click to expand...
Click to collapse
i updated install instructions. Also don't forget you must be on MIUI 12.5.7 firmware base.
I downloaded MIUI 12.5.7 but everything is the same.
Now when i write .\adb reboot fastboot the phone reboot itself on FASTBOOTD.
I tried everything but nothing just change because the xiaomi’s stuck on bootloop.
FCsperimentx said:
I downloaded MIUI 12.5.7 but everything is the same.
Now when i write .\adb reboot fastboot the phone reboot itself on FASTBOOTD.
I tried everything but nothing just change because the xiaomi’s stuck on bootloop.
Click to expand...
Click to collapse
You downloaded MIUI 12.5.7 is a good start but you could have alternatively download and flash only the firmware base which is only about 100MB. Also I see the instructions were not 100% clear, hope this will be clear enough for you. Also before you do, backup your files!
1. You supposed to go into bootloader, not fastboot.
Code:
adb reboot bootloader
2. Flash boot.img and vendor_boot.img files through fastboot command on your PC.
Code:
fastboot flash boot_ab ./boot.img
fastboot flash vendor_boot_ab ./vendor_boot.img
3. Now you need to go into recovery mode. It should say pixel experience recovery on top of the screen.
Code:
fastboot reboot recovery
4. Select Apply update -> Apply from ADB.
5. Now sideload the zip file through adb command on your PC
Code:
adb sideload ./PixelExperience_renoir-***.zip
6. You may need to format your data so it will boot properly.
Above commands are examples but might be different on your type of operating system you're using, so take them as example, not the exact command that will guaranteed to work.
If you're still having problem then, there's underlying problem that i'm not aware of and hope someone else will help you to flash it.
Hi, I don't get it I tried everything can't make it work. I finally flashed vendor_boot, and booted on TWRP 3.6.1_11-0 in order to manage to side load on Renoir, and I get this error all time (with the 12 and 12 plus official release of pixel experience) as on the picture.
Could you help me, it's been 6 month I don't manage to installé any pixel experience on this phone. First time I' m stuck with a smartphone ever ... Official/gsi nothing works, I only manage to flash the MIUI ROM and lineage os....
I'm desperate .
Eightkiller said:
Hi, I don't get it I tried everything can't make it work. I finally flashed vendor_boot, and booted on TWRP 3.6.1_11-0 in order to manage to side load on Renoir, and I get this error all time (with the 12 and 12 plus official release of pixel experience) as on the picture.
Could you help me, it's been 6 month I don't manage to installé any pixel experience on this phone. First time I' m stuck with a smartphone ever ... Official/gsi nothing works, I only manage to flash the MIUI ROM and lineage os....
I'm desperate .
Click to expand...
Click to collapse
TWRP doesn't support Android 12 yet, you need LineageOS or Pixel Experience recovery to sideload.
Edit: Follow instructions here: https://wiki.pixelexperience.org/devices/renoir/install/
aurotones said:
TWRP doesn't support Android 12 yet, you need LineageOS or Pixel Experience recovery to sideload.
Edit: Follow instructions here: https://wiki.pixelexperience.org/devices/renoir/install/
Click to expand...
Click to collapse
Thx for your answer the problem is I can't manage to boot on pixel experience recovery as shown in the tutorial. It says ok when I flash but I can only get to fastboot. And when I just try to fastboot boot 'myrecovery.img', it just rebbotsyto fastboot. That's why I tried to boot on TWRP which works without any trouble :s
Eightkiller said:
Thx for your answer the problem is I can't manage to boot on pixel experience recovery as shown in the tutorial. It says ok when I flash but I can only get to fastboot. And when I just try to fastboot boot 'myrecovery.img', it just rebbotsyto fastboot. That's why I tried to boot on TWRP which works without any trouble :s
Click to expand...
Click to collapse
TWRP will never work but while you're on TWRP your base should be on V12.5.7.0.RKIEUXM, flash that first in TWRP and then maybe try flash boot.img and vendor_boot.img and go to recovery mode. Without it you will never be able to install. Please give me details what your phone is, is it 5G variant with renoir codename?, is it global or china?, did it had MIUI 12.5 or 13?, these informations are necessary.
aurotones said:
TWRP will never work but while you're on TWRP your base should be on V12.5.7.0.RKIEUXM, flash that first in TWRP and then maybe try flash boot.img and vendor_boot.img and go to recovery mode. Without it you will never be able to install. Please give me details what your phone is, is it 5G variant with renoir codename?, is it global or china?, did it had MIUI 12.5 or 13?, these informations are necessary.
Click to expand...
Click to collapse
It had MIUI 12.x and it is a "eu" phone, I tried to flash the V12.5.7.0.RKIEUXM (miui_RENOIREEAGlobal_V12.5.7.0.RKIEUXM_325e38b5bf_11.0) from twrp it's not working with the same errors messages. I don't really know what to do, i managed to put back my 12.6 beta stock miui from "xiaomi.eu_multi_MI11Lite5G_21.7.7_v12-11-fastboot" version.
When i'm stuck i'm forced to install this back to not be stuck on fastboot loop. I found a "renoir_eea_global_images_V12.5.7.0.RKIEUXM_20220105.0000.00_11.0_eea" fastboot version but the installation is not working (would you have one working from my config ?).
I also tried to flash the firmware (fw_renoir_miui_RENOIREEAGlobal_V12.5.7.0.RKIEUXM_325e38b5bf_11.0 ~104mo) which gave me an "orange" fastboot instead of the fastboot with the funny character. And tried to install the recovery from pixel after but still stuck on fastboot.
Hope it will help you a bit more to help me
Eightkiller said:
It had MIUI 12.x and it is a "eu" phone, I tried to flash the V12.5.7.0.RKIEUXM (miui_RENOIREEAGlobal_V12.5.7.0.RKIEUXM_325e38b5bf_11.0) from twrp it's not working with the same errors messages. I don't really know what to do, i managed to put back my 12.6 beta stock miui from "xiaomi.eu_multi_MI11Lite5G_21.7.7_v12-11-fastboot" version.
When i'm stuck i'm forced to install this back to not be stuck on fastboot loop. I found a "renoir_eea_global_images_V12.5.7.0.RKIEUXM_20220105.0000.00_11.0_eea" fastboot version but the installation is not working (would you have one working from my config ?).
I also tried to flash the firmware (fw_renoir_miui_RENOIREEAGlobal_V12.5.7.0.RKIEUXM_325e38b5bf_11.0 ~104mo) which gave me an "orange" fastboot instead of the fastboot with the funny character. And tried to install the recovery from pixel after but still stuck on fastboot.
Hope it will help you a bit more to help me
Click to expand...
Click to collapse
i feel like your partition is messed up by TWRP so my advice is clean flash V12.5.7.0 fastboot rom with method of "flash_all.bat" on windows, "flash_all.sh" on linux i forgot the filenames but there's also method with lock in the name which you should avoid and then never touch or install TWRP as it's a bit unstable even with Android 11 roms, now you flash boot.img and vendor_boot.img provided by Pixel Experience through bootloader that only spells fastboot, no extra letter at the end.
This is important, Rebooting into bootloader and fastboot is different, when you do 'adb reboot fastboot' it will show fastbootd with orange text which something you should avoid, instead do 'adb reboot bootloader' or by vol down + power button and flash those 2 files.
If you still having problems try changing your boot slot by
Code:
fastboot --set-active=a
or
Code:
fastboot --set-active=b
And then
Code:
fastboot reboot recovery
If you still having problems, then head over to this telegram group and get help from ROM maintainer: https://t.me/arixelogroup
The Official build Pixel Experience is now available for renoir
It works perfectly on my device
PE for renoir
RGB39 said:
The Official build Pixel Experience is now available for renoir
It works perfectly on my device
PE for renoir
Click to expand...
Click to collapse
Attention that, Don't flash miui13 before flashing pe, or your wlan won't work.
aurotones said:
i feel like your partition is messed up by TWRP so my advice is clean flash V12.5.7.0 fastboot rom with method of "flash_all.bat" on windows, "flash_all.sh" on linux i forgot the filenames but there's also method with lock in the name which you should avoid and then never touch or install TWRP as it's a bit unstable even with Android 11 roms, now you flash boot.img and vendor_boot.img provided by Pixel Experience through bootloader that only spells fastboot, no extra letter at the end.
This is important, Rebooting into bootloader and fastboot is different, when you do 'adb reboot fastboot' it will show fastbootd with orange text which something you should avoid, instead do 'adb reboot bootloader' or by vol down + power button and flash those 2 files.
If you still having problems try changing your boot slot by
Code:
fastboot --set-active=a
or
Code:
fastboot --set-active=b
And then
Code:
fastboot reboot recovery
If you still having problems, then head over to this telegram group and get help from ROM maintainer: https://t.me/arixelogroup
Click to expand...
Click to collapse
Thx, but that's what i'm trying to do since yesterday, but i don't manage to fresh install 12.5.7.0 with the fastboot rom i found (miui_RENOIREEAGlobal_V12.5.7.0.RKIEUXM_325e38b5bf_11.0
I always get errors when i run the flash_all.bat, saying that my rom is more recent than the one i'm trying to flash. I tried to delete the "if statement" checking for the versions, but seems to mess up with the "directories name" after.
Would you have some link or place where i can get a working 12.5.7.0 with fastboot install ? I'll try it properly from this one.
Thanks in advance.
Eightkiller said:
Thx, but that's what i'm trying to do since yesterday, but i don't manage to fresh install 12.5.7.0 with the fastboot rom i found (miui_RENOIREEAGlobal_V12.5.7.0.RKIEUXM_325e38b5bf_11.0
I always get errors when i run the flash_all.bat, saying that my rom is more recent than the one i'm trying to flash. I tried to delete the "if statement" checking for the versions, but seems to mess up with the "directories name" after.
Would you have some link or place where i can get a working 12.5.7.0 with fastboot install ? I'll try it properly from this one.
Thanks in advance.
Click to expand...
Click to collapse
Use XiaoMiFlash
Download Official Xiaomi Mi Flash Tool All Versions
xiaomimiflashtool.com
or fastboot v29.0.5
Download Platform Tools for Android SDK Manager
Download Android SDK Platform-tools 29.0.0 , 29.0.0 , 30.0.0 , 30.0.0 , 31.0.0 , 31.0.0 , 31.0.0 , 33.0.0 , 33.0.0 , 33.0.0 , 34.0.0 ,
androidsdkmanager.azurewebsites.net
mitanyan98 said:
Use XiaoMiFlash
Download Official Xiaomi Mi Flash Tool All Versions
xiaomimiflashtool.com
or fastboot v29.0.5
Download Platform Tools for Android SDK Manager
Download Android SDK Platform-tools 29.0.0 , 29.0.0 , 30.0.0 , 30.0.0 , 31.0.0 , 31.0.0 , 31.0.0 , 33.0.0 , 33.0.0 , 33.0.0 , 34.0.0 ,
androidsdkmanager.azurewebsites.net
Click to expand...
Click to collapse
Thx for your answer, as i was saying: same error with mi flash tool (look the screenshot)
And if i comment the "checking parts" inside the .bat files, i get directories error on windows: it does not seem to check properly my direcotries name
for example a line is like this:
fastboot %* flash crclist %~dp0images\crclist.txt || @ECHO "Flash crclist error" && exit /B 1
the %~dp0images seems to be my path, but it's not taken properly into accoutn, seems to have " quote problems with the path
Edit: I had to double quote " the path inside the script as my path was having spaces inside
Thx for you help, I managed to install it, the only problem was to properly install 12.5.7 After succeding that everything worked as it should
RGB39 said:
Attention that, Don't flash miui13 before flashing pe, or your wlan won't work.
Click to expand...
Click to collapse
So that's why... so many hours wasted trying to get Wi-Fi to work. I had the "fantastic idea" of flashing the official global miui (renoir_global_images_V13.0.4.0.SKIMIXM_20220412....) prior to installing DotOS and when wi-fi did not work, flashed Pixel Experience...
And I'm pretty sure flashing miui 12.x will trigger ARB and brick the phone. Right?