Hi guys so I managed to get root and install twrp but I can't install a custom Rom,
I get no errors or anything during install I've tried lineageos 16 but every time insall and reboot I just get the boot screen for about 15 mins then it reboots to twrp.
The first time I tried it worked but I forgot to install open gapps so I tried again with gapps now every time I've tried flashing I get the same problem long boot screen then reboot to twrp.
I've even tried just flashing the Rom again but that doesn't work now also tried other roms that should work but no luck. I have my stock Rom backed up so I'm not stuck anywhere just want to get custom roms work I know it's probably something simple I'm doing wrong.
Reflash stock android 7 firmware.. Then install twrp again.. Make sure before flashing any rom, you have wiped system, data and cache.. Use gapps from http://opengapps.org
mcjv2015 said:
Hi guys so I managed to get root and install twrp but I can't install a custom Rom,
I get no errors or anything during install I've tried lineageos 16 but every time insall and reboot I just get the boot screen for about 15 mins then it reboots to twrp.
The first time I tried it worked but I forgot to install open gapps so I tried again with gapps now every time I've tried flashing I get the same problem long boot screen then reboot to twrp.
I've even tried just flashing the Rom again but that doesn't work now also tried other roms that should work but no luck. I have my stock Rom backed up so I'm not stuck anywhere just want to get custom roms work I know it's probably something simple I'm doing wrong.
Click to expand...
Click to collapse
Go into TWRP and delete all without USB Storage
go back to the first Page of TWRP
click restart click recovery and swipe to do restart
now check the never show screen bla bla
press select language and choose yours
swipe to go into TWRP
now click mount and there MTP must be enable
connect to pc and open phone directory...there should only be a Folder calld TWRP
now copy paste the Firmware you want...like Lineageos 16 with gapps for 9.0 and dont forget the Magisk 20.3
dont forget the Magisk 20.3
dont forget that **** Magisk 20.3!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
instal Fw, then gapps and after then magisk
delete dalvik+cache
restart...fingerscross
maybe tada
Related
Hey,
i cant install any custom rom,
when i try to install a rom i get always stuck in a bootloop, ive tried twrp and cwmp and ive tried to install cyanogenmod11 (different versions), carbonmod, c-rom!!
i wipe dalvik and cache but when i press on reboot system its stuck on bootlogo, also in a endless bootloop!!??!!
i could only install 2 times the rom (cyanogenmod 11), but i needed to format my mobile and now i always get the bootloop,
the versions are for my phone compatible, also everything is compatible for my phone, the rom and the recovery ( Moto g aka falcon)
HOPE SOMEONE CAN HELP ME
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++PROBLEM SOLVED, dont know why
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
*laughs*
Hi,
Of course it's not working! xD
Before installing any custom ROM's.. there's an important step: you need to unlock your bootloader. *smiles*
Moto's Unlock Page
[healthrisk info] Proceeding without an unlocked bootloader can lead to pain and frustration. [/healthrisk info]
Install CM Kernel
TheKingOfQueens said:
Hey,
i cant install any custom rom,
when i try to install a rom i get always stuck in a bootloop, ive tried twrp and cwmp and ive tried to install cyanogenmod11 (different versions), carbonmod, c-rom!!
i wipe dalvik and cache but when i press on reboot system its stuck on bootlogo, also in a endless bootloop!!??!!
i could only install 2 times the rom (cyanogenmod 11), but i needed to format my mobile and now i always get the bootloop,
the versions are for my phone compatible, also everything is compatible for my phone, the rom and the recovery ( Moto g aka falcon)
HOPE SOMEONE CAN HELP ME
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++PROBLEM SOLVED, dont know why
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Click to expand...
Click to collapse
Try to install a Cyanogen Kernel before flashing the rom.
Hello,
I had already a custom ROM on my phone (AOSP Extended). When I opened TWRP and wiped everything (including system, data and internal), TWRP couldn't install my ROM because of some error code 7 (but that's not the main problem here). When I opened fastboot on my phone, I installed twrp into my phone using fastboot. The TWRP did boot up just fine. But when I clicked "install" and selected the custom ROM, TWRP simply closes, reboots the phone and TWRP starts again asking me if I want to allow changes. I noticed that this isn't because of my custom ROM. I tried also other things such as Gapps and TWRP does the same thing.. I don't know how to fix this. Can you please help? Thank you!
Hi all, Am new to the Nexus9, I picked one up quite cheap and thought I would have a go at flashing a decent Rom. I am having no problems flashing a rom but every time I try and flash Gapps the Tablet gets stuck in a bootloop. I have tried lots of versions of Gapps but mostly arm64. I managed at one stage to flash one via the internal memory that seemed to work but then couldnt get Play sevices to work. Tried another but stuck in bootloop again.
At the moment I am trying a version of Slimrom and have tried Lineage 14.1. Anyone got any suggestions?
I normally flash a new rom in this order if the new rom is in my Download folder:
- TWRP Wipe advanced, tick System,Data,Cache.
-Back
-Install, go to sdcard/Download
-Select rom.zip
-after finish go back
-Select gapps64.zip
-after finish installing I press clean Dalvik and Cache
- Reboot system.
Wait a while and install as new device.
This should work.
With a normal update of a rom I simply install the update without wiping my system.
johhnyhotrocks said:
Hi all, Am new to the Nexus9, I picked one up quite cheap and thought I would have a go at flashing a decent Rom. I am having no problems flashing a rom but every time I try and flash Gapps the Tablet gets stuck in a bootloop. I have tried lots of versions of Gapps but mostly arm64. I managed at one stage to flash one via the internal memory that seemed to work but then couldnt get Play sevices to work. Tried another but stuck in bootloop again.
At the moment I am trying a version of Slimrom and have tried Lineage 14.1. Anyone got any suggestions?
Click to expand...
Click to collapse
If you're using opengapps, they are having trouble booting on a fresh install on slim and LineageOS. Try an older build of slim or lineage, boot up and set up, then update to newest build.
Solution
johhnyhotrocks said:
Hi all, Am new to the Nexus9, I picked one up quite cheap and thought I would have a go at flashing a decent Rom. I am having no problems flashing a rom but every time I try and flash Gapps the Tablet gets stuck in a bootloop. I have tried lots of versions of Gapps but mostly arm64. I managed at one stage to flash one via the internal memory that seemed to work but then couldnt get Play sevices to work. Tried another but stuck in bootloop again.
At the moment I am trying a version of Slimrom and have tried Lineage 14.1. Anyone got any suggestions?
Click to expand...
Click to collapse
I had the same issue with my NEXUS 9 wifi, but this solution mentioned here worked for me!
I am using:
lineage-14.1-20180920-nightly-flounder-signed
open_gapps-arm64-7.1-mini-20180923
Vendor Version: n9f27m
wanderweg you are my hero!
Mods make this stickie in the first posts....
If the system doesn't start after flashing with gapps just do this...
After flashing, mount system from TWRP, go to the "Advanced" tab, click on Terminal and type the following command:
echo "ro.setupwizard.mode=DISABLED" >> /system/build.prop
Just killed 2 days trying to figure it out and that's all it was.
P.S. Maybe roms can be updated to include the fix?
MOCKBA said:
wanderweg you are my hero!
Mods make this stickie in the first posts....
If the system doesn't start after flashing with gapps just do this...
After flashing, mount system from TWRP, go to the "Advanced" tab, click on Terminal and type the following command:
echo "ro.setupwizard.mode=DISABLED" >> /system/build.prop
Just killed 2 days trying to figure it out and that's all it was.
P.S. Maybe roms can be updated to include the fix?
Click to expand...
Click to collapse
It's a gapps issue not a ROM issue. Every now and then the setup wizard is weird in opengapps.
Hello, I now have 8 days note 10 lite today I unlocked bootloader, installed TWRP via adb after that I installed lineage os and wiping data etc. After that I faced a bootloop and lineageos bootscreen doesnt go away after 15 minutes.
So I tried to reflash the rom again, but twrp isnt able to reinstall the rom. I then used miflash to get original rom again.
Started all over installed twrp, flashed lineage os after this install after reboot I get everytime back into TWRP and looked on my pc and all files suddenly are encrypted on my phone and cant get lineage os rom again on my phone..
So I used miflash again and decided to ask here first. Does anybody know if I maybe use a wrong TWRP or missed a step?
I really dont understand it, I tried it for a 3th time. Here is exactly what I did.
- installed TWRP through ADB (TWRP-3.4.0-0_Android11_Roms_AndroidHQ254)
- In TWRP put rom on my internal storage
- Wipe Dalvik, data and cache
- Install rom (TWRP-3.4.0-0_Android11_Roms_AndroidHQ254)
- data wipe (where I had to type yes to confirm)
- Reboot to system and then it doesnt do anything and goes back into TWRP where I cant do anything, and I have to flash original rom back through MiFlash.
I run now MIUI 12.0.2
Android 10
Try using orangefox recovery. And i think you have to wipe data before installing rom, not after it.
ApexPrime said:
Try using orangefox recovery. And i think you have to wipe data before installing rom, not after it.
Click to expand...
Click to collapse
Thank you, I was able to do it with Orangefox.
Hi, I've recently repaired my mido with a new screen after a fall. After this I tried some custom roms. Initially I managed to install lineage 18.1. After I switched to dotOS. From this point on, the phone restarts a few seconds after the launcher appears. To fix this I used MiFlah to install latest MIUI, formatted data, wiped everything, tried TWRP and Orangefox, tried other custom roms with no changes. Now only stock MIUI11 works. Other custom roms (included lineage) gets the phone continuously rebooting. Could be an hardware problem? What am I doing wrong? It is the first time in ages I have problems flashing ROMS .-.
Thanks.
gabritb01 said:
Hi, I've recently repaired my mido with a new screen after a fall. After this I tried some custom roms. Initially I managed to install lineage 18.1. After I switched to dotOS. From this point on, the phone restarts a few seconds after the launcher appears. To fix this I used MiFlah to install latest MIUI, formatted data, wiped everything, tried TWRP and Orangefox, tried other custom roms with no changes. Now only stock MIUI11 works. Other custom roms (included lineage) gets the phone continuously rebooting. Could be an hardware problem? What am I doing wrong? It is the first time in ages I have problems flashing ROMS .-.
Thanks.
Click to expand...
Click to collapse
The vendor partition could have some code/ file that persists stock ui or system
and make sure your phone was rooted before flashing custom rom
and also via twrp flashing. from what Ive seen flash in twrp before flash custom rom( https://www.google.com/search?client=firefox-b-d&q=disable+encryption+treble ) then flash the "verity and encryption disabler ,theres another one to re enable encyption only " then flash custom rom
after flashing custom rom reboot poweroff(switch phone off via twrp)
reboot into twrp and flash whatever else you need
now reboot to system and your phone should work fine
Thanks, it worked!
I did:
Flash last miui with miflash
Flash recovery
Flash you suggested zip
Format data
Flash lineage 17.1 (android10)
WIpe system, data, cache, art cache
Flash any android 11 ROM
gabritb01 said:
Thanks, it worked!
I did:
Flash last miui with miflash
Flash recovery
Flash you suggested zip
Format data
Flash lineage 17.1 (android10)
WIpe system, data, cache, art cache
Flash any android 11 ROM
Click to expand...
Click to collapse
Holy **** how did you come up with this.
Either the zip with Magisk somehow fixed it or installing the android 10 rom somehow. Either way doesn't make sense
flairepathos.info said:
The vendor partition could have some code/ file that persists stock ui or system
and make sure your phone was rooted before flashing custom rom
and also via twrp flashing. from what Ive seen flash in twrp before flash custom rom( https://www.google.com/search?client=firefox-b-d&q=disable+encryption+treble ) then flash the "verity and encryption disabler ,theres another one to re enable encyption only " then flash custom rom
after flashing custom rom reboot poweroff(switch phone off via twrp)
reboot into twrp and flash whatever else you need
now reboot to system and your phone should work fine
Click to expand...
Click to collapse
Didn't work for me,
- did all the steps , exactly - flashed stock fastboot , then flashed Android 10 based rom crDroid + pico gapps. worked fine for 2 hours or so .
but interesting enough , phone freezes then shutdown without restarting , then i would go and trun it back on , but fingerprint not working now
heroboy107 said:
Didn't work for me,
- did all the steps , exactly - flashed stock fastboot , then flashed Android 10 based rom crDroid + pico gapps. worked fine for 2 hours or so .
but interesting enough , phone freezes then shutdown without restarting , then i would go and trun it back on , but fingerprint not working now
Click to expand...
Click to collapse
i think somewhere in the process the persist partition gets damaged .
heroboy107 said:
i think somewhere in the process the persist partition gets damaged .
Click to expand...
Click to collapse
so if you have magisk you can use a zip file to chmod 744 or 644 (it may be "chmod root 744" )the /persist partiton and thatll mean only true root has access
so 7 is read write execute 6 is read and write 4 is read only 5 is read execute i forgot which number was execute only 1 maybe?
so play with the permissions or look in the root folder for boot.p or permissions.sh then you can modify in there the permissions, it can cause bootloop , so always keep an original copy or youll hae to reflash(DISCLAIMER)
so you can pull the file using adb+root / or a root explorer
Copy it to phone then edit then copy to SDCARD
reboot to twrp then use shell/terminal "chmod 777" the partition where the file is / or read write everything
then copy the file and overwrite the original