Related
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
Update 2021.01.24: I consider the problem mentioned here as solved, since it can be resolved with MTK Bypass explained in the Guides Section. BE CAREFUL however to ONLY choose "Download Only" from the dropdown box in SP Flashtool! DO NOT select anything with "Format" in it, else you will lose S/N, MACs and IMEIs!
--- Original post ---
Hi, I have hard-bricked my new Realme 6 while trying to root it with Magisk. At the moment I am stuck in a bootloop at the power-on logo (realme in white letters). The boot animation (yellow realme letters) does not appear, instead the phone reboots after ~35 seconds. The bootloader says "Orange State".
I can NOT enter fastboot nor recovery mode by any key combination. Holding Power and Vol- makes the string RECOVERY MODE appear for a split second in the lower left part of the screen, however nothing happens afterwards.
I can power down by holding Power and Vol+ an releasing them immediately after the screen goes blank.
Holding Vol- and Vol+ while the phone is off and connecting USB makes a USB serial device appear on a windows machine for about 1-2 seconds before it disappears again.
I am very thankful for any hints on how to unbrick the device.
Here's what I have done in detail to mess up the phone:
1. OTA-Update to the latest OS in my region (EU11.A.48)
2. Unlocked the bootloader with the realme In-depth Test app (everything fine so far)
3. Download stock firmware RMX2001EU_11.A.48 ozip from realmeupdater.com
4. Unzipped with gnu unzip (content was readable, no extra decrytion tool for the ozip needed?) and extracted boot.img
5. Installed Magisk Manager and uploaded boot.img to the phone
6. Patched boot.img with Magisk Manager (and if I remeber correctly DIDN'T UNCHECK Preserve AVB 2.0/dm-verity)
7. Certainly FORGOT to do anything with vbmeta.img
8. Did NOT erase cache and userdata
9. Flashed patched boot.img directly and WITHOUT --disable-verity or --disable-verification
10. Rebooted the phone.
Am I correct that my problem is the AVB/dm-verity part?
Why does the modified boot.img affect the recovery (I thought they were seperate)
Can I try something with SP Flashtool?
I do have a second intact device that I didn't dare to touch yet, if that helps resolving the issue (e.g. for SP Flashtool readbacks).
As said any advice is highly welcome. Please ask I you need any more information to help.
I did that too... Magisk patched boot .img process of rooting is the risky process , I bricked my device, got it into red state.. tried thick and thin to revive using various flash tools, unable to do it, finally went to a shop , got it fixed, go-to a good repair shop, if you go to the service center, they will say replace motherboard for 5 k , I hope it helps, do traditional unlock bootloader TWRP recovery then flashing Magisk zip method for rooting process.
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
cmfan said:
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
Click to expand...
Click to collapse
Yes, you are right , red state means that, I guess bcoz, I may have formatted it and ran again unlocked bootloader but it showed unlocking failed, but I thought that I had previously unlocked it so it should be unlocked but I forgot to do that app thing process of deep test again, and I was on Android 10 latest and patched boot img of previous version using magisk, now I understand what mistake I made, I should have used boot IMG of current version of a 10 , but still I am afraid of doing this magisk method of rooting by patching boot IMG bcoz repair cost me 800/- , and I found out on YT that the latest version of a 10 of my device doesn't readily allows twrp and flashing zip of magisk.... Plus there are half baked info on important things, this is new device for me, I have had rooted Samsung and Lenovo, but rooting this is kind of tricky, bcoz it's still new, I think.... Want to try .... But I m afraid.... Tried fastboot method of TWRP flashing but can't replace stock room, so I guess I can't root .....
Well, there is a tutorial on how to root here on XDA, and seems to be confirmed working. I just didn't know about the vbmeta part from earlier Android versions. Haven't you tried that?
cmfan said:
Well, there is a tutorial on how to root here on XDA, and seems to be confirmed working. I just didn't know about the vbmeta part from earlier Android versions. Haven't you tried that?
Click to expand...
Click to collapse
Thnx man, I have rmx 1825 , but the process would be same for my device, I would have to search for it...
cmfan said:
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
Click to expand...
Click to collapse
Hello, please check my reply to your reply on my thread. BROM mode is as known as "Emergency Mode" and should not be inaccessible. I will once again request you to try different key combinations and also if it's detecting as fastboot, ADB or Fastboot commands should be available. Please try typing adb reboot or fastboot reboot with minimal ADB and fastboot tools and let me know. If you want to personally message me, message my telegram. I will try helping you there.
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
daeSundae said:
Hello, please check my reply to your reply on my thread. BROM mode is as known as "Emergency Mode" and should not be inaccessible. I will once again request you to try different key combinations and also if it's detecting as fastboot, ADB or Fastboot commands should be available. Please try typing adb reboot or fastboot reboot with minimal ADB and fastboot tools and let me know. If you want to personally message me, message my telegram. I will try helping you there.
Click to expand...
Click to collapse
I think there is no Emergency Download Mode in Realme devices.. pls guide ...
Ank Sak said:
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
Click to expand...
Click to collapse
Hello. Please follow this guide.
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
daeSundae said:
Hello. Please follow this guide.
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
Click to expand...
Click to collapse
Thnx that's a life saver, I am afraid to go forward with the device, this is promising, I will try, I found out that the new version c17 os Android 10 I am unable to root by twrp magisk zip flashing method, twrp isn't installing, there's an .ofp extracter, but it gives virus with software, unable to do, even talked on WhatsApp and gave him Gmail id, will try this method , I wanted the SP flash tool method, it's simple and can readily restore the stock rom... Thnx Sundae.. daesundae ... What kind of name is that...?? .. chuckles...
Ank Sak said:
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
Click to expand...
Click to collapse
This thread is about a Realme 6 (RMX2001 in my case). I've edited the very first post to immediately show the solution. Please check there or follow daeSundae's guide if you have a different device.
cmfan said:
This thread is about a Realme 6 (RMX2001 in my case). I've edited the very first post to immediately show the solution. Please check there or follow daeSundae's guide if you have a different device.
Click to expand...
Click to collapse
I saw everything that You posted, incidentally the YouTube video on this is on rmx1825 , thnx, whatever you posted it helped..
Hi guys, I did something very stupid, flashed the wrong boot.img and ended up completely bricking my device. I tried changing the active partition to see if it would boot, that didn't help.
I was on the latest august update of official android 11 . Then I found a boot.img I found online, but apparently it wasn't from the exact same rom. The phone booted but no WIFI.
It wouldn't allow me to flash any update through settings - system update hence I decided to try to use a fastboot rom....tried that, but the process when I hit flash_all.bat gives a lot of FAILED (remote: Flashing is not allowed for critical particions) or FAILED (Error reading sparse file)....what am I doing wrong?
I can't do anything except get in fastboot.
Is there any way I can get the phone to work agan? Needless to say that as the idiot I am the whole phone is wiped so this doesn't matter anymore. As long as I can get it to work.
Please advise and thanks (The phone is OP7T Pro ME european).
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
leginhee said:
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
Click to expand...
Click to collapse
Thanks the problem is i can't get it to start qualcomm edl. I power off, press both vol buttons and conmect to usb but nothing happens. What am i doing wrong?
Qualcomm edl Mode is just a blackscreen
"I can't do anything except get in fastboot."
Your Bootloader was unlocked ?
You can try fastboot reboot edl.
Or you can find a ROM that works, extract all images and flash all of them.
I have a similar problem.. kind of. I just flashed a rooted boot to my phone but there is no wifi at all, and since i dont have a SIM card im not getting any updates. the Boot.img came from the oneplus software update and i did the payload dumper. Since I have rooted it ive lost the wifi capabilites. (its the 7T pro me international.)
Hi, Guys. I have the Realme 7 pro. I did install the realme 2.0 ui with A11 in it. OK. everything was ok. Then I went back to the A10 realmeui 1.0 version of the software. The phone hard Bricked. Does not get in to the system. Does not get in to the recovery and the fastboot mode. I dont know what to do anymore.
I can only enter edl mode but I don't have an authorized id
If you could access fastboot mode, you could flash recovery and ROM from it, in case you have the bootloader unlocked. Otherwise you may manage to flash something from EDL mode using QFIL tool - firmware files and XMLs can be extracted from OFP firmware using extractor tool, but I suppose you may need some patched firehose binary file (I tried it with the one extracted from OFP, but it didn't work). Otherwise, you may try sending it to Realme service for reflashing or try to find some chinese/indian guy with credentials for MsmDownloadTool - I saw they charge about 5-20$ for doing that remotely...
qfil doesn't work, I've managed to solve the problem.
LEANDROMENDES said:
qfil doesn't work, I've managed to solve the problem.
Click to expand...
Click to collapse
Good to hear that you managed to solve it. Can you share some details about what you did, so that it can be helpful to somebody who will face the same issue?
I am in a similar situation with the only difference being that fastboot is working for me and i have unlocked bootloader.
i would greatly appreciate it if you told me how you managed to unbrick your device
The Issue:
The phone is constantly booting looping (flashes the Oneplus logo).I am unable to go to fastboot through either adb or through the on-phone buttons.
When plugged into a charger, it immediately begins to bootloop once enough power is supplied.
The only way to turn it off is by letting it get to 0%.
What caused the issue:
My phone got soft bricked all of a sudden, so I followed some tutorials that I found online showing me how to flash firmware using adb in fastboot and by unlocking my bootloader. This temporarily fixed the issue, but it told me that after doing everything I should relock it through ADB. Foolishly, I did so and am now stuck in this situation.
What I've tried:
I am able to get into EDL mode by holding both volume buttons, even while in the boot loop state.
I have downloaded the latest version of QPST and this firmware file (https://firmwarefile.com/oneplus-10t-5g-cph2415).
Quick note: I'm not sure if that's how it's meant to be, but QPST always detects my phone as "Download" (ESN: Download, Phone Number: Download, Banner: Download).
I am not quite sure how to use QPST and have tried following the guide, which told me to select some.hex files from the firmware I downloaded, but I was unable to find any.hex files at all and therefore could not proceed.
I also tried QFIL by selecting prog_firehose_ddr.elf from the IMAGES folder and tried multiple times in both UFS and emmc mode, selecting all of the rawprogram 1-5.xml files with their corresponding patch1-5.xml files from the IMAGES folder, but I always got the same error:
ERROR: function: sahara_rx_data:276 Unable to read packet header. Only read 0 bytes
ERROR: function: sahara_main:982 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Fail process fail
Finish Download
I have tried the leaked EDL flasher from here: https://forum.xda-developers.com/t/edl-flash-tool-leak.4494211/. However, I have been unsuccessful in doing so, though I may have been doing it wrong, and it would be greatly appreciated if someone could explain or tell me how to do it. As you can see in the attached image, I tried to flash it by using the images folder located in the firmware that I have downloaded. But it just gets stuck at 3%
indefinitely as the time goes up forever.
Thanks for reading looking forward to any replies/info
uh do not flash it by qfil it will just not work because oneplus actually blocked qfil and qpst so the only way is their edl tool and you cannot flash it on the edl tool unless you have an (actual) account and (not) bypassed
oneplus is really starting to nerve me really their merge with oppo is like a mistake
oneplushypergaming said:
oneplus is really starting to nerve me really their merge with oppo is like a mistake
Click to expand...
Click to collapse
the Merge was a mistake, its laughable that OnePlus went from being with the opensource community to being completely against it.. What annoys me the most is, instead of just locking their bootloader, they post the source code for their phone, probably as they have to, yet they give no way to utilize that code without developers running the risk of bricking their device.. Developers are willing to dedicate their time and money, to build for a device, all they ask, is for the ability to be able to unbrick, that is humble, Devs ask for donations, they do not force it.. Oppo do not even allow their bootloader to be unlocked, which prevents users from bricking their device.. OnePlus allow users to unlock their bootloader, knowing full well that Developers will understandably not be willing to develop for a device without a potential 60-80% brick chance.. The code could very well build for said rom, but once flashed it has the potential to turn the dev's device into a paper weight, meaning something they do to provide, turns into something that ultimately takes..
hosthere247 said:
the Merge was a mistake, its laughable that OnePlus went from being with the opensource community to being completely against it.. What annoys me the most is, instead of just locking their bootloader, they post the source code for their phone, probably as they have to, yet they give no way to utilize that code without developers running the risk of bricking their device.. Developers are willing to dedicate their time and money, to build for a device, all they ask, is for the ability to be able to unbrick, that is humble, Devs ask for donations, they do not force it.. Oppo do not even allow their bootloader to be unlocked, which prevents users from bricking their device.. OnePlus allow users to unlock their bootloader, knowing full well that Developers will understandably not be willing to develop for a device without a potential 60-80% brick chance.. The code could very well build for said rom, but once flashed it has the potential to turn the dev's device into a paper weight, meaning something they do to provide, turns into something that ultimately takes..
Click to expand...
Click to collapse
Well said to be honest that clears my suspicion about oppo they are greedy and dirty and maybe it is oppo who is making oneplus act like this in the first place oneplus should really consider all of this and give the people what they want instead of being a monopoly like oppo i never even liked oppo from the beginning actually i trusted oneplus with my 7t because i knew if i were to brick it the msm tool will always be there it has been months since the release of the 10t and ace pro and yet still no msm tool for it or a way to even get it back yet but there are many msm tools for the rest of the oneplus devices so maybe i am wrong they can tell us but i still think it is wrong that th 10 pro has to have an actual account.
I'm stuck with a Hard Brick and my device screen is black, only entering EDL for a few seconds.
Qmiclient it's the new MSM
AkayamiShurui said:
Qmiclient it's the new MSM
Click to expand...
Click to collapse
Hello , I found this topic because i'm facing the same problem as OP after relocking bootloader .... As anyone found solution to flash on edl mode ? Thanks
mybrickplus said:
Hello , I found this topic because i'm facing the same problem as OP after relocking bootloader .... As anyone found solution to flash on edl mode ? Thanks
Click to expand...
Click to collapse
the only thing i can think of is a slot switch
Yes Probably what happened but now i'm totally stuck on the bootloop until no baterry left.
Cant access fastboot because the phone boot and 2 seconds later reboot ... I can only access edl mode with Oneplus Flasher (bypassed by Hexa change) but after that, like op described the time keep increasing ,and circle progress stays at 3%, nothing seems change on phone
You have no option but to use the official flashing revovery via Oneplus / oppo whoever does it which means paying them to reflash the phone correctly
Ok thank you, so ive to send back the phone or i can do it on my own ?
mybrickplus said:
Ok thank you, so ive to send back the phone or i can do it on my own ?
Click to expand...
Click to collapse
no need to send the phone to oneplus just contact them directly and arrange for one of their techs to reflash your phone over the internet
leezaal said:
no need to send the phone to oneplus just contact them directly and arrange for one of their techs to reflash your phone over the internet
Click to expand...
Click to collapse
He could try but I'm not that sure that they are continuing to offer this service.
Thank you for your help and answers
So anyone who still watching this thread I made progress on this whole problem I took the 11r firmware file and it has script.sh commands in there and I ran them and it extracted all of the firmware files and made a bin folder that has only two folders inside of it and it took all the files to make it it puts it in your recovery section of your computer but it compiled all the empty files so they actually have things on them if you want to know how I did it and what I used just private message me cuz I will not be posting public because Oppo