So since i have EMUI 10 , magazine Unlock on my HQ mate 20 PRO does not download any new pics , even i i hit update button, it says no updates available.....
What can i do?
I have restarted, turned it on and off many times....
Related
Hi there,
Maybe this has allready been posted before, or this is not the right place to post this and if that´s the case, I´m sorry.
But now my problem.
Yesterday I´ve updated my Huawai Ascend Mate 7 to EMUI 3.1 (No clue if this an old version), but when I got a message about updateing to EMUI 4.0, I right away tried to download it (I read that is Android 6.0?), but when I tried to download the update it got stuck at 2% and it has been there for about 7 hours now.
That might be normal, because of an slow internet connection, but the night before I had no problem downloading the 1,1GB update of EMUI 3.1.
So, Does anyone know how I can fix this, because I can't cancel the download in anyway.
Thanks for reading,
Casper
Hello
I have Huawei mate 10 lite, and I recently upgraded to EUMI 8.0
after the upgrade I noticed a problem with google play store when I try to install or update an app, it says "downloading" and nothing happens for 20 to 30 mins, then the download starts.
This happens over wifi or Mobile data and I couldn't figure out the problem, so I did a Factory reset and the play store became fine for about 2 weeks, then yesterday the problem reoccurred !
Any help ?
Thanks
Hi, I have a mistake with the xiaomi Redmi Note 5 I have buy for my child. I'm french but I have import it the package are close red box write global version the plug are EU version model M1803E7SG (photo 1)
When I receive it the phone are on Miui 9 Android 8. I make update on Miui 10 Android 8 no mistake all work fine.
After configure it with mi account of my child and restore Google backup & mi cloud great phone I like it. I receive update for Android 9 Pie Miui 10 I make it and when restart restore all backup but can't finish to configure it because screen freeze ??? I do to reboot to Recovery stock 3.0 and wipe data and reboot but the phone start with mi logo & powered by Android but stay and stay.
I restart it on Recovery and with mi assistant and mipc suite china beta 3.0 flash Miui 10 Android 9 Pie again I can't use miflash because the BL is lock ! I have autorization but the phone are not associed on dev settings.
After restart I configure it as a new phone and can start great but after 2min use it the screen freeze again on spring board !!!
The phone are a global version only make Ota update and don't understand why can't use it ?
Please if someone Can help me.
Thanks
That's Redmi Note 5 Pro not Redmi Note 5. Wrong forum.
Look for solutions on whyred forum
q.sadid said:
Look for solutions on whyred forum
Click to expand...
Click to collapse
Hi, mine is Redmi 5 plus and I have the same problem. I even changed the screen and it weirdly worked fine for a few days but then went back to freezing after a few minutes of use.
Background info:
My Mate 20 Pro stopped receiving updates several months ago, maybe almost one year.
I never got notifications about new updates, and searching for one was useless.
I figured I was stuck on 9.1.0.300 forever, for some reason.
Recently I finally got it "unstuck" and updated to the latest Android 10 version (as of writing) 10.0.0.206.
Here is how I did it.
DISCLAIMER: I am only describing what I did; maybe it will be useful information for someone.
==================================================
What I did, that finally worked, to update Mate 20 Pro to EMUI 10 (Android 10) from 9.1.300:
I went from 9.1.0.300 (down)-> 9.0.0.210 (up)-> 9.1.0.320 (up)-> 10.0.0.187 (up)-> 10.0.0.206
First two steps I did manually / hacked HiSuite, last two steps were official OTA through Wifi.
1 - First I downgraded from 9.1 to 9.0:
I followed this youtube video ,that is basically an explanation of this original XDA post
In the Youtube page's description there is a link to get a ZIP from Google Drive containing the older version of HiSuite, and the patcher for it.
So I downloaded and used those.
For the "update_full_base.zip" I downloaded the 9.0.0.210 from the XDA post (direct link for it here). Which is mentioned in the Youtube tutorial.
IMPORTANT!!: The install process on phone screen (progress circle) went smoothly, and the phone rebooted automatically (as expected);
BUT the boot screen Huawei logo was static, not oscillating or indicating any progress.
I waited a good 10 minutes and it did not move from that.
So I force-powered down the phone holding "vol up + power button" for several seconds;
It rebooted into a screen saying like "your files system is severely corrupted, recovering....."
Then it recovered successfully, and rebooted into a "brand new" 9.0.0.210 Android)
>I SKIPPED CHOOSING AN APN DURING ANDROID INITIAL SETUP!<
>I ALSO DID NOT CONNECT TO WIFI!<
>Skipped everything on initial setup, just to get to the home screen<
2 - Then same process all over again, with the same HiSuite and patch files, but different "update_full_base.zip", for 9.1:
I downloaded a 9.1.0.320 zip from the ONLINE FIRMWARE DATABASE https://pro-teammt.ru/en/online-firmware-database/
(for me specifically, I used LYA-L29C675E17R1P17B320 (9.1.0.320)) <- my phone is c635, this file is for c675, but I could bot find one for c635 lya-l29 9.1
DIRECT LINK TO THIS update_full_base.zip http://update.dbankcdn.com/TDS/data/files/p3/s15/G4500/g1755/v319250/f1/full//update_full_base.zip if someone does not want to or cannot use the Online Firmware Database website.
IMPORTANT!!:
At the very end of the install process on the phone screen (the progress circle), install said "FAILED!", but then when the phone rebooted it had in fact been upgraded.
I had updated to a "brand new" 9.1.0.320.
3 - Minor update to 9.1.0.362:
On the phone itself I finally connected to Wifi for the first time (STILL SKIPPED APN);
checked online for update (on Settings), found a minor update to 9.1.0.362. Installed it.
Rebooted normally into 9.1.0.362.
4 - Finally updated to Android 10:
Checked Settings for update again (Wifi was already configured/connected), 10.0.0.187 was available;
downloaded/installed it.
I got finally to Android 10 (10.0.0.187)
5 - Minor update to Android 10.0.0.206:
After installation, just a couple of seconds after the reboot of the fresh Android 10, another even newer version (10.0.0.206) pop-up showed automatically, so I installed it too.
PS: Only after having installed the latest 10.0.0.206 version and booting into it, I enabled the correct APN from phone's Settings.
Hi to all,I received the android 10 update yesterday and so far i've had no problems. exept for when I restart the phone or turn it off and on. the screen shows a triangle with tools in the middle for about 5 seconds and then normally starts up without any problems. I was wondering if any others out there that got the 10 upadate on their xperia 10 plus have had this or noticed this on their phone? or is it just mine? thanks in advance for your answers. other than that the phone works ok after the update.
Did you apply the OTA update or did you flash the firmware with flashtool?
The OTA update
This screen should only appear once (OTA and flashtool)
But when I try to mix flash,It will display every time it starts
If it happens many times, should be a software problem
I solved it. I did a reinstall of the firmware via xperia companion.