(English is not my native language and I am currently learning English.)Hi,everyone.I have used Los15_Treble and Los16_Treble_ExPerimental as the base package, try to launch some Android 10 GSIS, but it flashes to Fastboot.Then I tried to replace the kernel, but failed, it stopped in the boot interface (boot first screen). Someone knows how to solve this problem? Or LOS17 Treble package?
ghgtttttt said:
(English is not my native language and I am currently learning English.)Hi,everyone.I have used Los15_Treble and Los16_Treble_ExPerimental as the base package, try to launch some Android 10 GSIS, but it flashes to Fastboot.Then I tried to replace the kernel, but failed, it stopped in the boot interface (boot first screen). Someone knows how to solve this problem? Or LOS17 Treble package?
Click to expand...
Click to collapse
Stop trying to use GSI ROMs. Use regular LOS ROMs.
You need to be on LG stock Pie first to have have Pie blobs (drivers). Then install LOS-17.x ROM. There are also other custom ROMs based on LOS-17.x.
https://forum.xda-developers.com/lg-v30/development/rom-lineageos-15-1-t3789793
What variant do you have? Some like H931/H933 need some additional prep work to run LOS ROMS. Right now U.S. T-Mobile H932 is only compatible with LOS-16 ROMs but not LOS-17 ROMs.
Related
So, am I correct in believing that almost all treble ROMs will boot on the H9, if so, there is an entire forum dedicated to project treble development on XDA, the H9 is listed as supported for at least AOSP 8.1.
Anyone think that other ROMs will work?
Link to forum: https://forum.xda-developers.com/project-treble/trebleenabled-device-development
I'm not sure if I want to risk bricking my device, it's too much effort to unbrick it etc...
Yes. I flashed LineageOS and AOSP, both are working fine. Due to us not having a properly working TWRP for Android 8.1 I couldn't install any Gapps manually meaning you can only use a bare custom rom without Gapps or Roms with pre-installed Gapps (like the AOSP Rom in your shared forum).
Have you tried the Pixel one?
Pixel Experience does not boot on my h9
wakko42 said:
Pixel Experience does not boot on my h9
Click to expand...
Click to collapse
+1
wakko42 said:
Pixel Experience does not boot on my h9
Click to expand...
Click to collapse
Just can't understand why...Really wish to have that one....:crying:
Hello, has anyone (using a Treble Rom) ever had a successful SafetyNet test?
Hi!
i am new to the treble-enabled stuff, this is the first phone i own that is treble capable and i have a few questions. I think they can apply to other NOBS, so here i go hoping some nice guy will help me understand:
Background: i have the redmi 5plus (global) which i have unlocked (after painful 720h) and i have flashed Pixel Experience 8.1 rom, but i like to experiment and it seems most of interesting roms are on treble.
1. By default, "vince" is not treble enabled. (treble check app says so)
2. "vince" seems to be an "A only" device, not A/B device,
Main Question: Now, what should i do to try (safely) some GSI roms (like here XDA LOS 16 GSI)?
Sub-Question 1: I must most likely flash some other things first, i guess... like a vendor or a treble image? Where do i find it?
Sub-Question 2: I have installed TRWP recovery, is it treble enabled or should i ALSO find a treble enabled recovery?
If i got it all wrong, please i would be happy to stand corrected!
Hi.
Well, yeah, you need to install another vendor, as far as I know, OrangeFox is the treble enabled recovery.
Someone already explained this in this post.
Have fun. :fingers-crossed:
Xyzko said:
Hi.
Well, yeah, you need to install another vendor, as far as I know, OrangeFox is the treble enabled recovery.
Someone already explained this in this post.
Have fun. :fingers-crossed:
Click to expand...
Click to collapse
Thank you! Sometimes hard to find the right threads...
Installed orangefox, cool recovery!
One last question... how does kernel works with treble? Do i need treble enabled kernels if i want to change the kernel? Are they provided with the treble-enabled rom already or i get to keep the existing kernel? Is the kernel on a dedicated partition separated from the GSI and the Vendor? (i am starting to understand this, maybe)?
gardiol said:
Thank you! Sometimes hard to find the right threads...
Installed orangefox, cool recovery!
One last question... how does kernel works with treble? Do i need treble enabled kernels if i want to change the kernel? Are they provided with the treble-enabled rom already or i get to keep the existing kernel? Is the kernel on a dedicated partition separated from the GSI and the Vendor? (i am starting to understand this, maybe)?
Click to expand...
Click to collapse
Months ago it started to appear some projects about android 9.0 before of Google revealed it as android Pie, then at this time devices with treble support also can support GSIs from these projects according two specific conditions: the processor (first qualcomm, then exynos, kirin and mtk were supported) and kind of partition system A-A/B.
At this first times was needed to flash a vendor treble supported rom to add treble support and flash over it a GSI 9.0. without the need to flash other kernel.
In this forum there are a lot of GSIs that eventually could work in our device but it could be many bugs https://forum.xda-developers.com/project-treble/trebleenabled-device-development.
Now is not needed to complicate the job flashing a vendor, then a GSI and maybe a custom treblized kernel so started to appear first developments of roms running 9.0 and these roms will work as exactly did it any rom 7.1 or 8.1, in the future they could be include treble support.
This is the short story.
Just want to collate some information from a number of different threads and discuss some of the options moving forwards for H932 users. I've been a long time user of Lineage, but couldn't resist the urge to try stock (TWRP) Pie. Thankfully I quite like it (the battery life is amazing) because now (and correct me if I'm wrong):
The H932 that's been "upgraded" to Stock Pie cannot install a custom rom as it will break a number of sensors including the camera
In order to go back to a custom rom of Pie or lower (Lineage / AOSP) based I must:
Downgrade to stock Nougat by flashing the stock (TWRP based) img,.
Run every update since then
Install the custom ROM of choice, but run it in permissive
Wait for a generous dev to create a H932 cusom rom that makes use of Pie blobs
None of the current Lineage 17 based roms work on H932 despite running Pie Blobs
H932 Converter does not work on any Lineage 17 based roms
It's not a biggie for me, but I'm still kicking myself. At least I've still got Root and TWRP.
Bit disappointed that none of these GSI based chinese Roms will work on H932 but as I'm stuck on stock Pie anyway, that's a mute point.
ddevey said:
Just want to collate some information from a number of different threads and discuss some of the options moving forwards for H932 users. I've been a long time user of Lineage, but couldn't resist the urge to try stock (TWRP) Pie. Thankfully I quite like it (the battery life is amazing) because now (and correct me if I'm wrong):
The H932 that's been "upgraded" to Stock Pie cannot install a custom rom as it will break a number of sensors including the camera
In order to go back to a custom rom of Pie or lower (Lineage / AOSP) based I must:
Downgrade to stock Nougat by flashing the stock (TWRP based) img,.
Run every update since then
Install the custom ROM of choice, but run it in permissive
Wait for a generous dev to create a H932 cusom rom that makes use of Pie blobs
None of the current Lineage 17 based roms work on H932 despite running Pie Blobs
H932 Converter does not work on any Lineage 17 based roms
It's not a biggie for me, but I'm still kicking myself. At least I've still got Root and TWRP.
Bit disappointed that none of these GSI based chinese Roms will work on H932 but as I'm stuck on stock Pie anyway, that's a mute point.
Click to expand...
Click to collapse
You merely need to downgrade to T-mobile H932 TWRP-flashable Oreo zip. Why do you think you need to downgrade to Nougat?
But since you have been on Pie, when running the custom ROMs you will need a permissive kernel and some sensors still may not work.
ddevey said:
It's not a biggie for me, but I'm still kicking myself. At least I've still got Root and TWRP.
Click to expand...
Click to collapse
Yes, you were warned in the T-mobile H932 Pie thread...
ChazzMatt said:
You merely need to downgrade to T-mobile H932 TWRP-flashable Oreo zip. Why do you think you need to downgrade to Nougat?
But since you have been on Pie, when running the custom ROMs you will need a permissive kernel and some sensors still may not work..
Click to expand...
Click to collapse
Dunno - think I read somewhere that people had luck getting the sensors back with that one, but if we can't get them all back then it's a mute point.
ChazzMatt said:
Yes, you were warned in the T-mobile H932 Pie thread...
Click to expand...
Click to collapse
Yes - but not in the Stock Collection thread - at least not until later in the thread (by which time it was too late). Unless of course the TWRP flashable stock rom is not affected by this issue. Maybe I've got my wires crossed.
I'm not complaining - such is the life of a flashaholic. Nevertheless, I'm wondering whether there is anything on the horizon and what others plan to do.......
ddevey said:
Dunno - think I read somewhere that people had luck getting the sensors back with that one, but if we can't get them all back then it's a mute point.
Click to expand...
Click to collapse
OK, maybe to get all sensors back. Yeah, some EU H930 had to do that, Refurbish back to Nougat.
Not sure how it works with T-mobile H932 and TWRP flashable zip.
While I updated to Pie on my spare US998 V30+ just to know the process to write it up, on my daily bootloader unlocked and rooted V30+, I'm still on Oreo. Nothing compelling about Pie right now, and I don't want to waste hours trying to install all the mods and getting everything set up again. I need my phone for my job.
Are there any Custom ROM's or Stock Android options for haydn devices? I'm open to something that is not 100% working with a few exceptions though.
I haven't tried it yet, but since we have a partially working and unsupported TWRP, try out Pixel Experience GSI or AOSP GSI. Someone in this device forum suggested but not sure if it would even work in the first place.
sundhar88 said:
I haven't tried it yet, but since we have a partially working and unsupported TWRP, try out Pixel Experience GSI or AOSP GSI. Someone in this device forum suggested but not sure if it would even work in the first place.
Click to expand...
Click to collapse
I'm curious to know the same. Waiting patiently.
AOSP 12.0 GSI - G6 ALIHello friends, how are you? I was pretty tired of the traditional roms we have for the Moto G6 there, (I got sick), these roms are excellent, but with time it ended up being more the same, that's when phhusson released an Android 12 GSI, I went to test it and found it amazing the operation on the system, unfortunately there is no way to use the SIM, but some improvements are even nice, I'm starting in this area of customization of the latest ROMs (current android)
You need a recovery that accepts ARM64 ROMs, and the GSI itself
In the link you select system-squeak-arm64-ab-vanilla.img.xz and download, then unzip and install on your system and test
GSI:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Depending on when you are watching this post the performance is already better, however I made this post to motivate the community (us) to try to port ROMs and GSIs for the Moto G6 ALI.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
How were you able to get an a/b partition GSI to boot properly on an A-only partition device like the Moto G6?. I've used A-only GSIs successfully on mine in the past but my understanding is A-only has been discontinued with release of a12.
I don't know man, but I just installed it, in the application that sees which system it is if it's AB or A only says it's AB, if I'm not mistaken I've already tested A only roms for it but it didn't work for some reason, I don't know if it's the current Vendor of the custom Roms I'm using or something else, I think it's the vendor since it's not an ARM32 but an ARM64, it can also be for recovery. In short, I don't know.
but it works
Don't know why an a/b gsi works on an a-only device but it does. Give this a12 gsi a try OctaviOS-v3.2-arm64_bvN-29122021-Unofficial.img.xz. It booted and I got an LTE signal no problem.
doesn't work for me
tried both 64 and 32, i'm using twrp 3.6.0_9-0 though, not sure if that is the problem, rolling back to 11 for now.
You might to flash permissive v4 before first boot after flashing the gsi image. https://androidfilehost.com/?w=search&s=Permissiver
Skippy12359 said:
You might to flash permissive v4 before first boot after flashing the gsi image. https://androidfilehost.com/?w=search&s=Permissiver
Click to expand...
Click to collapse
Nope, still gets a boot loop into the bootloader, i'll give it another try though
adhamnasr said:
Nope, still gets a boot loop into the bootloader, i'll give it another try though
Click to expand...
Click to collapse
Try man, because it's worth testing and seeing the Moto G6 ALI running Android 12, pretty cool
HeroRicky_Games09 said:
Try man, because it's worth testing and seeing the Moto G6 ALI running Android 12, pretty cool
Click to expand...
Click to collapse
i am, but maybe i'm doing something wrong
do you guys push the img and install using twrp or sideload?
edit: i reflashed it to stock, and gonna repeat the process
I didn't use stock boot or vendor when Octavia gsi booted for me. I was on the latest Ali Crdroid11 Dec patch, backed it up in latest twrp, did a normal wipe and flashed the vanilla Octavia arm64 a/b system gsi link above. Don't recall if it booted right away or if I went back to twrp and flashed permissiver v4. Either way it booted fine, got carrier signal right away (t- mobile) , sound also worked fine. Didn't flash gapps or anything else. Just was curious if an a/b gsi would actually boot on a G6 and both Aosp12 and Octavia both did for me. Try this permissive zip if the other doesn't work https://androidfilehost.com/?fid=6006931924117886495
Did a little research on telegram and found out a12 a/b gsi's will also work on an a-only device as long as the device supports SAR (system as root). Treble check app shows the G6 supports SAR and is arm64 so that's likely why they boot OK for some of us. That said the two I've tried Aosp12 and Octavia12 were laggy and would hang occasionally.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
I can't believe it, but I made it work...
adhamnasr said:
I can't believe it, but I made it work...
Click to expand...
Click to collapse
The cool thing about this GSI is that it runs without lags, the only problem is the mobile data. if it worked it would be perfect
HeroRicky_Games09 said:
AOSP 12.0 GSI - G6 ALIHello friends, how are you? I was pretty tired of the traditional roms we have for the Moto G6 there, (I got sick), these roms are excellent, but with time it ended up being more the same, that's when phhusson released an Android 12 GSI, I went to test it and found it amazing the operation on the system, unfortunately there is no way to use the SIM, but some improvements are even nice, I'm starting in this area of customization of the latest ROMs (current android)
You need a recovery that accepts ARM64 ROMs, and the GSI itself
In the link you select system-squeak-arm64-ab-vanilla.img.xz and download, then unzip and install on your system and test
GSI:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Depending on when you are watching this post the performance is already better, however I made this post to motivate the community (us) to try to port ROMs and GSIs for the Moto G6 ALI.
For those who are having doubts a while ago I made a video installing the TWRP with the GSI of Android 11 on the Moto G6 ALI, I recommend you check it out if you have any questions!
(The video is in Brazilian Portuguese my native language)
Click to expand...
Click to collapse
I made a video installing this GSI on it, go there and check it out! It is in Portuguese Brazil.
Will it work on moto g6 play Jeter 3gb ram 64 bit cpu snapdragon 430 currently on Android 11 pixel experience
Nikhil15 said:
Will it work on moto g6 play Jeter 3gb ram 64 bit cpu snapdragon 430 currently on Android 11 pixel experience
Click to expand...
Click to collapse
possibly yes!
Can you tell the steps of installation because I don't understand brazilian
And please tell about bugs of anything