Related
Hi,
I'm having problems with my S3. I'm trying to copy a ROM over to the internal storage via USB. It's connected and I can view all the files and directories. However, when I go to copy the ROM over, I get this error:
Cannot copy item
The device has either stopped responding or has been disconnected.
I did have it rooted with CWM and custom ROMs, but I flashed the leaked official JB and have had this problem since. I've flashed back to stock ICS and still no luck...
I have the same problem! Bump
---------- Post added at 10:18 PM ---------- Previous post was at 09:56 PM ----------
OOooh I think I found the solution!!!!!!
"MTP Device Cannot Start code 10" error message
I get an "MTP Device Cannot Start, error code 10" error message when I connect my Sansa player to a PC running Windows XP. What can I do?
1. Make sure you are logged in as an administrator
2. If connected, disconnect your player from the PC
3. Open your command prompt, click Start select Run
4. Type cmd then press Enter
5. Type the following after the prompt: Net localgroup Administrators local service /add then press Enter
NOTE: A "The command completed successfully" message should appear.
6. Close the command prompt and reconnect the Sansa player.
-Just CMD on start menu, right click and run as administrator and do as it says here
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
Edit: Didn't work Well, it worked on installing drivers that failed, but still I can't copy files.. I still get that message..... Hmmmmmmmmmmmmmmmmmmm
---------- Post added at 10:24 PM ---------- Previous post was at 10:21 PM ----------
Another edit: I think it's because your file is corrupt.. I now noticed that I can copy other files than the gapps.zip I was trying on....
keem85 said:
I have the same problem! Bump
---------- Post added at 10:18 PM ---------- Previous post was at 09:56 PM ----------
OOooh I think I found the solution!!!!!!
"MTP Device Cannot Start code 10" error message
I get an "MTP Device Cannot Start, error code 10" error message when I connect my Sansa player to a PC running Windows XP. What can I do?
1. Make sure you are logged in as an administrator
2. If connected, disconnect your player from the PC
3. Open your command prompt, click Start select Run
4. Type cmd then press Enter
5. Type the following after the prompt: Net localgroup Administrators local service /add then press Enter
NOTE: A "The command completed successfully" message should appear.
6. Close the command prompt and reconnect the Sansa player.
-Just CMD on start menu, right click and run as administrator and do as it says here
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
Edit: Didn't work Well, it worked on installing drivers that failed, but still I can't copy files.. I still get that message..... Hmmmmmmmmmmmmmmmmmmm
---------- Post added at 10:24 PM ---------- Previous post was at 10:21 PM ----------
Another edit: I think it's because your file is corrupt.. I now noticed that I can copy other files than the gapps.zip I was trying on....
Click to expand...
Click to collapse
I'm having the same copy issue. I've tried downloading multiple different ROMs and copying them over to the internal storage and it seems like it's a crap shoot whether they work or I get the "cannot copy" error. Of course the ROMs I want to flash are the ones that won't work. I'm on a newly flashed Galaxy Nexus running 4.2.
I had the same challenge with 4.1.2 at the beginning. I found out that somehow my kernel (Siyah RC1) was the issue, after installing RC3 and also now with 1.7 it works fine.
chrismast said:
I had the same challenge with 4.1.2 at the beginning. I found out that somehow my kernel (Siyah RC1) was the issue, after installing RC3 and also now with 1.7 it works fine.
Click to expand...
Click to collapse
I flashed back to my original jr03o build and I'm still having the issue. Specifically I'm trying to copy the new 4.2 ROM from MMuzzy to internal storage but still no dice.
Have same issue with galaxy note. was working fine, then data reset and installed CWM + recovery, tehn all of a sudden I cant copy ROMs over. Although I can make and delte folders on the phones storage from the PC.
still nothing
gcappa said:
Have same issue with galaxy note. was working fine, then data reset and installed CWM + recovery, tehn all of a sudden I cant copy ROMs over. Although I can make and delte folders on the phones storage from the PC.
Click to expand...
Click to collapse
I have galaxy S3 int with many roms in my extcard..
i dont know what to do..!! pls help guys
i ve done everything above and still nothing..
I had this problem too not sure how to fix it but a nice work around is using airdroid from Google Play its free and works a charm.
I cant post a link as I'm a newbie
+1
From time to time im experiencing the same problem.
Try
Right-click on the ROM > Click Properties > Click Unblock
Had this problem and this fixed it.
had this problem, spent one hour doing research online trying to solve it.
here is the solution:
Your file is corrupted, download it again!!!
lol
jcsawyer said:
Hi,
I'm having problems with my S3. I'm trying to copy a ROM over to the internal storage via USB. It's connected and I can view all the files and directories. However, when I go to copy the ROM over, I get this error:
Cannot copy item
The device has either stopped responding or has been disconnected.
I did have it rooted with CWM and custom ROMs, but I flashed the leaked official JB and have had this problem since. I've flashed back to stock ICS and still no luck...
Click to expand...
Click to collapse
Do you tick USB debugging in developer option, if YES, do you disable media storage from startup, if No, my answer is try other USB, OTG cable. Goodluck!
Cannot copy item
Hi.... was having the same problem...:crying:
After a day long research, I found the solution.....:victory:
connected my phone with another PC and it worked there...means having problem with my PC not in S3 I9300...
Thanks.
Thanks!
david0916 said:
had this problem, spent one hour doing research online trying to solve it.
here is the solution:
Your file is corrupted, download it again!!!
lol
Click to expand...
Click to collapse
Hahahaha thank you!
Worked for me!
Hi,for Galaxy S4 just download USB MASS Storage Enabler and run it ,you will have no problems copying after that!
most of the copy problem like this mainly caused by the USB line or the USB port...
especially when problem happens when copy big files
quato79 said:
Hi,for Galaxy S4 just download USB MASS Storage Enabler and run it ,you will have no problems copying after that!
Click to expand...
Click to collapse
Worked a charm on the S3 aswell, Thanks
treklos said:
Try
Right-click on the ROM > Click Properties > Click Unblock
Had this problem and this fixed it.
Click to expand...
Click to collapse
This did not work for me. For me the issue was that the download in chrome of the rom was "complete", but it was not. IT was only 120mb in stead of 200+, so the file was corrupt. This is why I could not copy it.
Redownloaded, worked.
Maybe Kies Service is running in the background? You can reinstall the Samsung USB Device Driver on your machine. You also can uninstall the device driver installed by the system when you plug in the device the first time. Maybe this helps.
Hi! What I did was I put whatever I wanted to copy into a folder (in my case it was a ROM i.e. a zip file) and then tried to copy and it worked.
TRY THIS
if not copy, try cutting (you can copy it back later)
One of our xda member, biktor_gj successfully ported Android 5.1.1 on Gear S!
As many of you requested, I wanted to show you guys how to install it step-by-step.
Here is the tutorial links to my Youtube video.
----------------------------------------------------------------------------------------------------------------
https://youtu.be/Ha5cHUC_JS4
----------------------------------------------------------------------------------------------------------------
REQUIRED TO DOWNLOAD:
- Recovery (EXTRACT NEEDED)
http://bit.ly/1OA4tnS
-CM12.1 (EXTRACT NEEDED)
http://bit.ly/1MP6dUp
- Tizen image (EXTRACT NEEDED)
http://bit.ly/1OYWmR5
- ADB driver
http://bit.ly/1LGd2Me
- adb.zip (EXTRACT NEEDED)
http://bit.ly/1MwRr7n
- Kernel w/ Bluetooth (IF NEEDED)
http://bit.ly/1Vk9Zdo
----------------------------------------------------------------------------------------------------------------
COMMANDS:
1. adb shell
2. mount /dev/block/mmcblk0p24 /data
3. dd if=/dev/block/mmcblk0p23 of=/data/system-data.img
4. cd data
5. tar cf sysdata.tar system-data.img
6. exit
7. adb pull /data/sysdata.tar
----------------------------------------------------------------------------------------------------------------
Here is how to get back Tizen from Android tutorial
https://youtu.be/Yo_o7cv6lxY
Will this make the gear hot faster?? How about the battery?? just asking... Btw Thank you...
Do all the apps function, and can you install android apps?
Sent from my SAMSUNG-SM-N910A using Tapatalk
This is awesome, if only BT worked...
Hitsouka said:
Will this make the gear hot faster?? How about the battery?? just asking... Btw Thank you...
Click to expand...
Click to collapse
It is around 6hours.
But, before you wear..
You have to register a wrist insurance first [emoji6]
Sent from my LG-VS985 using Tapatalk
kevinthemilkdud said:
Do all the apps function, and can you install android apps?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
Yes, you can either use ADB or Playstore.
Sent from my LG-VS985 using Tapatalk
raineyland said:
This is awesome, if only BT worked...
Click to expand...
Click to collapse
Bluetooth actually works. You have to flash a kernel to fix BT.
Sent from my LG-VS985 using Tapatalk
Hi Mate,
First of all amazing work this is amazing!
are you able to provide the kernel?
Thanks!
2727alex2727 said:
Hi Mate,
First of all amazing work this is amazing!
are you able to provide the kernel?
Thanks!
Click to expand...
Click to collapse
That was my question, what kernel, and where to find it?
2727alex2727 said:
Hi Mate,
First of all amazing work this is amazing!
are you able to provide the kernel?
Thanks!
Click to expand...
Click to collapse
Android On Gear S w/ Bluetooth.
Downloads:
CM12.1: http://bit.ly/1iUY4XN
Kernel: http://bit.ly/1Vk9Zdo
Flash those via Odin.
minjoon0312 said:
Android On Gear S w/ Bluetooth.
Downloads:
CM12.1: http://bit.ly/1iUY4XN
Kernel: http://bit.ly/1Vk9Zdo
Flash those via Odin.
Click to expand...
Click to collapse
Thanks, yo! Going to try it now! Will report.
raineyland said:
Thanks, yo! Going to try it now! Will report.
Click to expand...
Click to collapse
Make sure that you must back up the data partition through ADB. Watch the tutorial. If you don't make a backup, it might be hard to go back Tizen.
Sent from my iPad using Tapatalk
minjoon0312 said:
Make sure that you must back up the data partition through ADB. Watch the tutorial. If you don't make a backup, it might be hard to go back Tizen.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Will do. Am starting now.
---------- Post added at 02:32 AM ---------- Previous post was at 01:53 AM ----------
minjoon0312 said:
Make sure that you must back up the data partition through ADB. Watch the tutorial. If you don't make a backup, it might be hard to go back Tizen.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
raineyland said:
Will do. Am starting now.
Click to expand...
Click to collapse
Ok, TWRP in stalled fine. ADB Setup and drivers went fine. When I start typing in commands, this happens...
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>mount /dev/block/mmcblk0p24 /data
'mount' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>
---------- Post added at 02:57 AM ---------- Previous post was at 02:32 AM ----------
raineyland said:
Will do. Am starting now.
---------- Post added at 02:32 AM ---------- Previous post was at 01:53 AM ----------
Ok, TWRP in stalled fine. ADB Setup and drivers went fine. When I start typing in commands, this happens...
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>mount /dev/block/mmcblk0p24 /data
'mount' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>
Click to expand...
Click to collapse
I'm going to Odin back to stock and try again. I was already rooted when I started, maybe that was the issue...
---------- Post added at 02:58 AM ---------- Previous post was at 02:57 AM ----------
minjoon0312 said:
Android On Gear S w/ Bluetooth.
Downloads:
CM12.1: http://bit.ly/1iUY4XN
Kernel: http://bit.ly/1Vk9Zdo
Flash those via Odin.
Click to expand...
Click to collapse
Did you mean flash these through twrp?
raineyland said:
Will do. Am starting now.
---------- Post added at 02:32 AM ---------- Previous post was at 01:53 AM ----------
Ok, TWRP in stalled fine. ADB Setup and drivers went fine. When I start typing in commands, this happens...
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>mount /dev/block/mmcblk0p24 /data
'mount' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\raine\Downloads\Root\Gear\adb-tools-1.0.31>
---------- Post added at 02:57 AM ---------- Previous post was at 02:32 AM ----------
I'm going to Odin back to stock and try again. I was already rooted when I started, maybe that was the issue...
---------- Post added at 02:58 AM ---------- Previous post was at 02:57 AM ----------
Did you mean flash these through twrp?
Click to expand...
Click to collapse
Odin.
Sent from my iPad using Tapatalk
What about the adb issues? Any thoughts?
---------- Post added at 03:47 AM ---------- Previous post was at 02:59 AM ----------
minjoon0312 said:
Make sure that you must back up the data partition through ADB. Watch the tutorial. If you don't make a backup, it might be hard to go back Tizen.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
So, I went back to stock and now Odin won't flash twrp..
.I got twrp back but adb shell command isn't working...
This is what's happening...
raineyland said:
This is what's happening...
Click to expand...
Click to collapse
That is totally normal, just go on to the next command.[emoji6]
Sent from my LG-VS985 using Tapatalk
minjoon0312 said:
That is totally normal, just go on to the next command.[emoji6]
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply and the help. When I go to command number 2, it says mount is recognized. (see above) Thanks again!
raineyland said:
Thanks for the reply and the help. When I go to command number 2, it says mount is recognized. (see above) Thanks again!
Click to expand...
Click to collapse
Not sure why isn't working. Try: adb devices
Sent from my LG-VS985 using Tapatalk
Anyone who can help me? Xposed stopped working all of a sudden eventhough it says everything is on and working fine.. (have already deleted and re-installed xposed but it wouldn't help..)
I am getting this message but don't know what to do with it..
(It's some kind of download failure.)
Downloading dl.xposed info /repo /partial/ 15855 .xml. gz failure: 302 (Moved Temporarily)
That's the message i'm getting, not sure if this has got something to do with it but i think it is.
S8+ android 8.0.0
version 90-beta3
Thanks!!
Xposed Framework is working, only the repo download doesn't work. I think we must wait. Doesn't find any further information now.
https://forum.xda-developers.com/showpost.php?p=77758701&postcount=732
.. some more comments about this repo glitch.
Sent with much love & Android. OnePlus 5T
I get the exact same error.
Update
Think it resolved itself..
Everything working again
https://forum.xda-developers.com/xposed/discussion-xposed-oreo-t3732816/post77770036
Reset data of Xposed Installer and all fine now.
Sent with much love & Android. OnePlus 5T
Wiping Xposed installer data worked for me too.
Thanks!
Wiping data & cache didn't work for me.
Still Xposed can't download module list.
Do you have a second device to crosstest ?
Adblocker on device ? modified host files ? Firewall ?
-Rye- said:
Do you have a second device to crosstest ?
Adblocker on device ? modified host files ? Firewall ?
Click to expand...
Click to collapse
I have the same Problem on Samsung Galaxy s5mini @ stock Kitkat root, no Download list of modules. Code 302
Data wipe did change nothing,
New installation of Xposed installer did cange nothing
Crosschecked with Samsung Galaxy Tab 4 @ Kitkat root, works! Same version of installer sme WiFi.
I have no Adblockers / Firewalls installed on device. Perhaps there is one installed by default by Samsung?
Crosscheck shows no Firewall-blocking on Network.
It did work when I installed it.
I think it stopped working when I started to deoxidise the system. I de-installed some updates and deactivated Samsung and Google stuff with titanium Backup... All other things are working normally...
Does xposed need some of these things?
---------- Post added at 10:36 AM ---------- Previous post was at 10:25 AM ----------
However when it still worked I installed the following xposed modules:
Permission Master
BootManager
Does one of these restrict downoad permissions of xposed by default?
Same problem.
"Downloading h t t p : / / dl.exposed.info/repo.xml.gz failed: 302 (Moved Temporarily)"
(Added spaces)
Version:
...v32_de4f0d.apk
Workaround for now: download and install modules manually.
Please see the following thread post from myself that has an AFH link to an Unofficial version of the XposedInstaller app with the fixes that address the Repo Error 301/302.
https://forum.xda-developers.com/showthread.php?p=77923681
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900T device.
Instead of wiping installer app's data, one workaround that worked for me is to remove/rename the no_backup folder in xposed installer's data dir.
n0j0e said:
https://forum.xda-developers.com/xposed/discussion-xposed-oreo-t3732816/post77770036
Reset data of Xposed Installer and all fine now.
thx that fixed it
Click to expand...
Click to collapse
kennethho said:
Instead of wiping installer app's data, one workaround that worked for me is to remove/rename the no_backup folder in xposed installer's data dir.
Click to expand...
Click to collapse
where is the folder ?
---------- Post added at 12:36 PM ---------- Previous post was at 12:09 PM ----------
Ibuprophen said:
Just an FYI for those who are experiencing some issues regarding an error message 301/302 for the Repo within the Installer app.
rovo89 had enforced an HTTPS redirect on the Repo server, but the HttpURLConnection class used by the Xposed Installer has issues with following redirects from HTTP to HTTPS.
This redirect has been working for some but, not others.
I had created a pull request reflecting the corrections for the XPosed Installer within Rovo89's XPosed Installer on Github.
https://github.com/rovo89/XposedInstaller/pull/458
So far I'm still awaiting Rovo89's response.
This was all done yesterday. Let's give it some time. :thumbup:
In the meantime, i had created an Unofficial release with the URL fix for the Repo and its located on the following link.
https://www.androidfilehost.com/?w=files&flid=284172
I also kept the Signature in tact so when/if @rovo89 releases a fixed Installer app, updating the Unofficial version to the Official one won't be a problem.
Enjoy!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
Click to expand...
Click to collapse
cant install it on android 4.4
Code:
Running "adb -d install -r "D:\USB_HDD\701\Android\apps\system\Exposed\without error repo 302\Xposed.Installer.ver.2.6.1.build.32.URL-Fix.apk""
[100%] /data/local/tmp/Xposed.Installer.ver.2.6.1.build.32.URL-Fix.apk
pkg: /data/local/tmp/Xposed.Installer.ver.2.6.1.build.32.URL-Fix.apk
Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
Code:
Running "adb -d install -r "D:\USB_HDD\701\Android\apps\system\Exposed\without error repo 302\Xposed.Installer.ver.2.6.0.build.31.URL-Fix.apk""
[100%] /data/local/tmp/Xposed.Installer.ver.2.6.0.build.31.URL-Fix.apk
pkg: /data/local/tmp/Xposed.Installer.ver.2.6.0.build.31.URL-Fix.apk
Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
And virustotal.com says there are 2 viruses/
https://www.virustotal.com/gui/file...e960e719318d208839f408463f29cb9ecec/detection
---------- Post added at 12:45 PM ---------- Previous post was at 12:36 PM ----------
Repo error is gone after I have used XposedInstaller_86framework.apk which used to install exposed on Meizu phones.
Now there is no repo error.
If you can't connect card to GPay this instruction maybe can help you!
We will need
• Root (Magisk)
• Root Explorer
Open root explorer and go to root/data/data/com.google.android.gms
Select this three folders
• app_chimera
• app_cryptauth_external_device_db
• app_dg_cache
Set permissions as on attached screenshot or set octal value to 0444
After it go to
• app_dg_cache
And delete all folders except the oldest one, you can understand which is the oldest one by comparing .apk file in these folders (if there is only one folder, do not delete anything)
Everything is ready! Now you can add your card and use it.
I hope it will help someone.
EDIT: after doing this your phone won't pass SafetyNet checks. If you need SafetyNet set octal of folders to default 0771 (permissions rwxrwx--x), but Google Pay will stop working again.
screenshot
Thx for sharing.
Works on my k20 pro
Hmm....I don't see google.android.gsm
I see google.android.gms and google.android.gm and google.android.gsf
---------- Post added at 11:57 AM ---------- Previous post was at 11:50 AM ----------
hippo2s said:
Hmm....I don't see google.android.gsm
I see google.android.gms and google.android.gm and google.android.gsf
Click to expand...
Click to collapse
Edit. Found it. You have a typo. It is gms
---------- Post added at 11:59 AM ---------- Previous post was at 11:57 AM ----------
And dg_cache
I have two folders with exact same timestamp. What do I do?
Checking the files I side these two, the.apk file has some time difference. Is this what you mean?
---------- Post added at 12:11 PM ---------- Previous post was at 11:59 AM ----------
hippo2s said:
Hmm....I don't see google.android.gsm
I see google.android.gms and google.android.gm and google.android.gsf
---------- Post added at 11:57 AM ---------- Previous post was at 11:50 AM ----------
Edit. Found it. You have a typo. It is gms
---------- Post added at 11:59 AM ---------- Previous post was at 11:57 AM ----------
And dg_cache
I have two folders with exact same timestamp. What do I do?
Checking the files I side these two, the.apk file has some time difference. Is this what you mean?
Click to expand...
Click to collapse
I left the folders alone and was able to activate one card. Good enough! Thank you.
Thanks heaps. Working on latest Havoc OS build perfect.
Working, on rooted Stock EEA ROM.
You might want to correct your typo though, the folder to open in root explorer would be root/data/data/com.google.android.gms instead of root/data/data/com.google.android.gsm
cgdams said:
Working, on rooted Stock EEA ROM.
You might want to correct your typo though, the folder to open in root explorer would be root/data/data/com.google.android.gms instead of root/data/data/com.google.android.gsm
Click to expand...
Click to collapse
oh, my bad, thanks!
hippo2s said:
Found it. You have a typo. It is gms
Click to expand...
Click to collapse
You're right, I made a mistake sorry.
Nol0n said:
If you can't connect card to GPay this instruction maybe can help you!
We will need
• Root (Magisk)
• Root Explorer
Open root explorer and go to root/data/data/com.google.android.gms
Select this three folders
• app_chimera
• app_cryptauth_external_device_db
• app_dg_cache
Set permissions as on attached screenshot or set octal value to 0444
After it go to
• app_dg_cache
And delete all folders except the oldest one (if there is only one folder, do not delete anything)
Reboot!
I hope it will help someone.
Click to expand...
Click to collapse
Thank you so much. This is working perfectly. The only reason I wouldn't install custom was that google pay wont work in any of them.
Altho I was able to add the cards I found I couldn't use the card in google pay. At the payment terminal the phone vibrated, but no charge or payment was registered.
Anyone can confirm if they can actually use Google pay after this?
hippo2s said:
Altho I was able to add the cards I found I couldn't use the card in google pay. At the payment terminal the phone vibrated, but no charge or payment was registered.
Anyone can confirm if they can actually use Google pay after this?
Click to expand...
Click to collapse
Confirms gpay working fine
Works Just fine. Best sollution out there... Thanks...
Not work here on xiaomi.eu 9.9.6.
hippo2s said:
Altho I was able to add the cards I found I couldn't use the card in google pay. At the payment terminal the phone vibrated, but no charge or payment was registered.
Anyone can confirm if they can actually use Google pay after this?
Click to expand...
Click to collapse
Yeap, working sweet over the ditch on my K20 Pro
Just paid for my breakfast after using this fix. Xiaomi.eu stable 10 on mi 9t pro.
Hot-Proton said:
Not work here on xiaomi.eu 9.9.6.
Click to expand...
Click to collapse
Are you sure you did everything right?
Hi,thanks for posting this.
On my phone the magisk safety net no pass anymore : tells me invalid response.
I don't know if gpay is working or not.
Is normal?
Thanks again
Fury1997 said:
Hi,thanks for posting this.
On my phone the magisk safety net no pass anymore : tells me invalid response.
I don't know if gpay is working or not.
Is normal?
Thanks again
Click to expand...
Click to collapse
Yes, it's normal and root is fine too...
You can uninstall and reinstall google services and it gonna fix magisk response, but going to crash google pay again. So just leave it...
thiagodark said:
Yes, it's normal and root is fine too...
You can uninstall and reinstall google services and it gonna fix magisk response, but going to crash google pay again. So just leave it...
Click to expand...
Click to collapse
Perfect,I leave all as it is after the procedure with root explorer.
Fury1997 said:
Hi,thanks for posting this.
On my phone the magisk safety net no pass anymore : tells me invalid response.
I don't know if gpay is working or not.
Is normal?
Thanks again
Click to expand...
Click to collapse
you can install safety patch module, you can find it in magisk
edited: it doesn't help
JBNCK-NONROOT Debloat script for Samsung devices
Works best on:
Exynos S20 series
Exynos A Series
Knox-tripped Samsung devices
[THIS PROJECT IS DISCONTINUED AND I WILL NO LONGER ANSWER ANY QUESTIONS ON THIS THREAD]
Don't worry, I'm working on a better, more extreme and more up-to-date one. I will post a link when it's ready!
Perfect, thank you
Very nice script, JanBoyGamer23. Is it possible to remove the stock Messanger app, as well? The one with three dots in the icon?
I can't install, for example Chrome
AlliePC said:
Very nice script, JanBoyGamer23. Is it possible to remove the stock Messanger app, as well? The one with three dots in the icon?
Click to expand...
Click to collapse
Yes, of course! Go to your platform tools folder (Download them if you need them) and type in:
adb shell pm uninstall -k --user 0 com.samsung.android.messaging
diegoxdrp said:
I can't install, for example Chrome
Click to expand...
Click to collapse
What?
Perfect thanks
Thank you, exactly what does "platform tools folder" mean?
Thanks, what if i want to remove or disable Samsung Game Optimization Service? Am on Android 11, 3.0.
I did try the adb command, but it didnt work. pl advise.
Vipin2689 said:
Thanks, what if i want to remove or disable Samsung Game Optimization Service? Am on Android 11, 3.0.
I did try the adb command, but it didnt work. pl advise.
Click to expand...
Click to collapse
gos always reinstalls itself. The only way to remove it is the root method: Go to your root explorer and find the app's folder in /system/priv-app and delete the folder
Hey, great script! However, I found out I needed Android SIM Toolkit after I ran the script. Do you know a way to recover/ reinstall it? or "undo" the script somehow? Thanks!
Sari95 said:
Hey, great script! However, I found out I needed Android SIM Toolkit after I ran the script. Do you know a way to recover/ reinstall it? or "undo" the script somehow? Thanks!
Click to expand...
Click to collapse
open cmd in the folder of the debloat script (the folder with all the files: adb, debloat.bat etc.) and type in:
adb shell pm install-existing com.android.stk
or with a dual sim:
adb shell pm install-existing com.android.stk
adb shell pm install-existing com.android.stk2
JanBoyGamer23 said:
open cmd in the folder of the debloat script (the folder with all the files: adb, debloat.bat etc.) and type in:
adb shell pm install-existing com.android.stk
or with a dual sim:
adb shell pm install-existing com.android.stk
adb shell pm install-existing com.android.stk2
Click to expand...
Click to collapse
That worked perfectly. Thank you!
OP, Is there a way to run your script on a MAC?
Hi, did bixby routines will work after execute this script on s20+?
I am assuming this will work on new Galaxy S21... Asking before I break my wife's new phone!!
gee.dunkin said:
I am assuming this will work on new Galaxy S21... Asking before I break my wife's new phone!!
Click to expand...
Click to collapse
Yep, should work.
Great, thanks!
FYI: I had Vanced YouTube installed and it was removed by the script. At the end I had no YouTube at all.
Also, I was somewhat surprised that you decided to remove Google Maps as well, as bloatware. Anyways, I've reinstalled both Vanced YouTube and Maps, no big deal.
Thanks for the script, you saved my some headache! I actually tried uninstalling all Facebook components using System Apps Uninstaller (root) and I ended up reflashing the firmware through Odin, as the phone got stuck on boot loops after "successfully" uninstalling them.
@op,
Could you please post a complete list of items included in the package (to be removed)?
The script had a tremendous effect on battery and I'm curious to review the main offenders (I highly suspect it to be Google telemetry, but I'd like to know specifics).
Again, excellent work, thank you!
Thanks!
nacos said:
@op,
Could you please post a complete list of items included in the package (to be removed)?
The script had a tremendous effect on battery and I'm curious to review the main offenders (I highly suspect it to be Google telemetry, but I'd like to know specifics).
Again, excellent work, thank you!
Thanks!
Click to expand...
Click to collapse
Nice to hear that it worked for you!
If you want a full list you can just look into the script as I don't remember. I know that it almost completely removes google spying, facebook trash, samsung knox bloatware and other country based bloat.