Build from sources of RootPayEnabler & PermanentProxy-for-WearOS.
big thanks to those guys.
It simply enable a thosen proxy , and enable Google Pay when enabling the proxy.
Install it on your Wear OS watch directly using ADB with "adb install WearProxy.9.1.apk".
Enable the Developer Options . Settings -> System -> About and tap the Build number until you are a "developer".
Next, go to Settings -> Developer options and enable "ADB debugging" and "Debug over Bluetooth".
Finally start up WearProxy, request permission and press "Allow" or "Always allow this Computer" if prompted.
After requesting permission, ADB can be turned off again to save battery, unless you want to turn off the proxy completely.
Marsdroid
THX FOR ALL THE FISH :silly:
Could you share more information about this?
jesi said:
Could you share more information about this?
Click to expand...
Click to collapse
there really isn't much more to say about the project unfortunately .. what do you want to know?
der egentligt ikke så meget mere at fortælle om projektet desværre .. hvad vil du vide ?
I did not quite understand how to use the app itself. Do I need to have root to use this? Do I need to use a computer to use this app?
Thanks!
First of all - thanks 4 your development. I had some issues with WearProxy and Pay Enabler was not really working 4 me on my Fossil Gen 4. I`ll definitely try your app.
As i got - i need to find the good proxy and give it 2 your app? Dunno where to find fast one, couse with regular public proxy i got big delay in notification and other things.
I installed it on my watch. Why it halfly on some moonspeak language? When i`m pressing "Weeee" button, it telling me "Gammelt Lort" on Dutch language, that meant "Old poop" (not poop . Can you please leave it on ENG or where I can change it?
Anyway, the Orbot in USA VPN mode for Wear OS & Google Pay apps - still the best solution as for me. Hope your app will help me to move from that chain
Okay, everything is working perfect. Dont know what the difference between your app and WearProxy, but your app working as for now. Thanks, bro!
I`m using 45.76.2.34:8080 US proxy.
After couple reboots it stops working. I have Fossil Gen 4, and no root on it, maybe that is the reason... App continuously showing me my home wifi ip. Tried 2 stop and reinstall - nothing. And Google Play says there is no internet connection. So, i`m moving back 2 Orbot & US VPN.
nemo.tecx1 said:
First of all - thanks 4 your development. I had some issues with WearProxy and Pay Enabler was not really working 4 me on my Fossil Gen 4. I`ll definitely try your app.
As i got - i need to find the good proxy and give it 2 your app? Dunno where to find fast one, couse with regular public proxy i got big delay in notification and other things.
I installed it on my watch. Why it halfly on some moonspeak language? When i`m pressing "Weeee" button, it telling me "Gammelt Lort" on Dutch language, that meant "Old poop" (not poop . Can you please leave it on ENG or where I can change it?
Anyway, the Orbot in USA VPN mode for Wear OS & Google Pay apps - still the best solution as for me. Hope your app will help me to move from that chain
Okay, everything is working perfect. Dont know what the difference between your app and WearProxy, but your app working as for now. Thanks, bro!
I`m using 45.76.2.34:8080 US proxy.
After couple reboots it stops working. I have Fossil Gen 4, and no root on it, maybe that is the reason... App continuously showing me my home wifi ip. Tried 2 stop and reinstall - nothing. And Google Play says there is no internet connection. So, i`m moving back 2 Orbot & US VPN.
Click to expand...
Click to collapse
haha thats funny "it telling me "Gammelt Lort" on Dutch language, that meant "Old poop" (not poop . Can you please leave it on ENG or where I can change it?"
im guessing that the proxy u use is full or atleast busy.. dont post the address here
Related
NEW RELEASE
Hi. This is a special app for clients of Caixa Geral de Depósitos, a portuguese Bank.
This bank uses a matriz card to validate online banking.
Requirements:
-> .Net Framework 3.5
-> All resolutions
-> Instructions in the app
Special features:
-> Encryption
-> Password
Also in MS Marketplace, xda marketplace and freewarepocketpc.net (omarket)
UPDATE - http://forum.xda-developers.com/showpost.php?p=6992447&postcount=12 bug solved!
Sorry, please delete
error posting
good app.
I can leave my matriz card at home now
PS: just a question?? Will this send my data to you
mikhe69 said:
good app.
I can leave my matriz card at home now
PS: just a question?? Will this send my data to you
Click to expand...
Click to collapse
No, but if you want i can put here the source and you compile it.
BTW, wonderful ideal, i will upload it.
Hi. It's already uploaded.
IF anyone want to help me to develop, i will be glad.
New release v1.2 with CAB and improved!
herpez said:
NEW RELEASE - v1.2
Hi. This is a special app for clients of Caixa Geral de Depósitos, a portuguese Bank.
This bank uses a matriz card to validate online banking.
Requirements:
-> .Net Framework 3.5
-> WVGA or VGA
-> BEFORE the first start, edit matriz.txt in the app folder and change it to your matriz card. After the 1st run, that file will be encripted, renamed and the txt deleted.
ToDo:
- add password to open
- QVGA support
If anyone want to help me changing the source to make some of the "ToDo", i would be very thankful.
Click to expand...
Click to collapse
Tnks!! will try it
but I advice to think well before you put your data in any electronic media....
if there is only the matrix card data, then nothing special can be done.
you will have to know also the login and the password, or else it will e totally useless.
I will try it as well.
PS: There should be an app to replace ATM, identity, social security, finance, and all cards, so I can leave my wallet at home
gluonyc said:
Tnks!! will try it
but I advice to think well before you put your data in any electronic media....
Click to expand...
Click to collapse
Sure, but i guess that the odds to loose your PDA or someone access data on it its the same as loose your wallet (with matriz card inside) or someone check it.
Although, aware of that, thats the reason i encrypted the file, i deleted the matriz.txt and i will implement password. I may call it try to lower the odds of something bad happen, however, it's always a risk
Hi
Just one question this programs works well???
i try but the numbers are not my numbers
Best Regards
Hi. Yes, it works. However i think that something can go wrong.
But lets check first some things.
Did you edited the file matriz.txt to your matriz? If not, you need to do that BEFORE run the app for the first time, otherwise you will get a default matriz card which is random.
If you didnt edit, and now that you have run the app, let me say how you can do it.
Go to you app folder, which maybe /Program Files/Matriz CGD/ or /Storage Card/Program Files/Matriz CGD/
Then delete a file called matriz
Then, in your windows notepad, edit the file i posted as attachment here to your card. For example, if your matriz is 123 687 497... it will become 1 2 3 6 8 7 4 9 7 ... and do it for ALL the numbers, this way you will replace the entire numbers in the attached txt.
Then, put that file (the matriz.txt) in your app folder (maybe /Program Files/Matriz CGD/ or /Storage Card/Program Files/Matriz CGD/)
Any doubt just say, or if you want we can talk by pm.
Thanks
Hi,
I did leave a comment on windows marketplace for your application, did you see that?
I already installed the new release but I found an error that crash the application. If I push the button "calcular" after putting the password, the program shows an error and close because no column or line is selected.
regards
rhcpu2 said:
Hi,
I did leave a comment on windows marketplace for your application, did you see that?
I already installed the new release but I found an error that crash the application. If I push the button "calcular" after putting the password, the program shows an error and close because no column or line is selected.
regards
Click to expand...
Click to collapse
Hi. I didint see it yet. One new release is on its way and i will update that.
Thanks for let me know, i miss the feedback
rhcpu2 said:
Hi,
I did leave a comment on windows marketplace for your application, did you see that?
I already installed the new release but I found an error that crash the application. If I push the button "calcular" after putting the password, the program shows an error and close because no column or line is selected.
regards
Click to expand...
Click to collapse
It's Solved. You can install the last cab from here or wait from marketplace. If you wait for marketplace, it will take about 1 week or more because one other version is on it's way so just after that being approved i can send this one.
I saw now your comment, however i would ask you to next time please mail me or send me here the bugs because i see it more often here.
Really thanks for the help!
And i hope you liked the new instructions and matriz card input (it will be easier to input in the next marketplace version)
herpez said:
It's Solved. You can install the last cab from here or wait from marketplace. If you wait for marketplace, it will take about 1 week or more because one other version is on it's way so just after that being approved i can send this one.
I saw now your comment, however i would ask you to next time please mail me or send me here the bugs because i see it more often here.
Really thanks for the help!
And i hope you liked the new instructions and matriz card input (it will be easier to input in the next marketplace version)
Click to expand...
Click to collapse
Nice! Good Program!!!
Obrigado (Thanks!)
rhcpu2 said:
Nice! Good Program!!!
Obrigado (Thanks!)
Click to expand...
Click to collapse
You're welcome!
Hope you like it.
Marketplace has one version with no bugs so far.
Thanks
Congratulations for this great app. Can you also make the same app, but for Montepio? Is it only a matter of changing the logo?
Obrigado desde já. (Thanks in advance)
bgcngm said:
Congratulations for this great app. Can you also make the same app, but for Montepio? Is it only a matter of changing the logo?
Obrigado desde já. (Thanks in advance)
Click to expand...
Click to collapse
Hi. Im working or expand it to BCP, Montepio and so on, however, it takes a bit of time and by now i dont have it. Really Sorry.
I dont really know how does the matriz from montepio works, can you tell me please?
Obrigado
grrrrr.....can someone please help!!! I have seen multiple posts about this and I cannot believe there is not a long term fix.
Background
I have a GT 10.1 purchased from the USA...wifi only. I currently live in China. I have a Google account setup with a US credit card. I am using a VPN which gives a Utah IP address. I still cannot see most paid apps in Marketplace nor download and install many. I have many friends with iPads that do not have this restriction but I desperately want to stay with Android, but cannot believe Google has made this so frustrating.
Non-solution
Please do not recommend MarketEnabler. This app may work fine for some units if they have a radio but it does not work for wifi only devices.
Solution
I am able to get it to work following these instructions, but I have to do this every time and it is a pain....there has to be some setting or program that will make this easier. Can anyone please help me and the multitude of others that post about this same thing? There has to be some setting in build.prop or something that is controlling this. Thank you in advance.
1) Go into Settings>Applications>Manage Applications. Find Market and force stop it then clear cache.
2) Go into Settings>Accounts and sync and remove all of your google accounts. (I have not always had to perform this step but often it is required for some reason. Don't worry they are easy to add back and nothing gets deleted.)
3) Connect to a USA VPN.
4) Add back your main Google account that has an associated US credit card.
5) Open Market place and when you do you will have to agree to the terms and conditions again. Accept this. At this point you should be able to find and download most of those apps that you could not previously.
6) Now you can add back in all of your other Google accounts if you have more.
Please someone help us....there has to be an easier way!
Sorry to bother, but can anyone recommend a better way around this? Thank you.
ximoosea said:
Sorry to bother, but can anyone recommend a better way around this? Thank you.
Click to expand...
Click to collapse
There are no solution for this. They are too stupid for this, too busy acquiring companies.
You realize that its not that hard to download the said application's apk and installing them directly to the tablet.
shaolinx said:
You realize that its not that hard to download the said application's apk and installing them directly to the tablet.
Click to expand...
Click to collapse
Sorry but this is the problem....I know it is easy to sideload an application but the problem is that they cannot even be downloaded from the website. When I go to the Market from a PC it shows my tablet but it is greyed out and I am not able to just download the apk.
ximoosea said:
Sorry but this is the problem....I know it is easy to sideload an application but the problem is that they cannot even be downloaded from the website. When I go to the Market from a PC it shows my tablet but it is greyed out and I am not able to just download the apk.
Click to expand...
Click to collapse
I believe he means sideloaded as in from different places on the internet. Have you tried the Amazon App Store?
tghockey07 said:
I believe he means sideloaded as in from different places on the internet. Have you tried the Amazon App Store?
Click to expand...
Click to collapse
or perhaps, from some "side service" sites....
Just use Market Enabler, I have no idea why no one is aware of this aplication - I have been using it forever now.
Szadzik said:
Just use Market Enabler, I have no idea why no one is aware of this aplication - I have been using it forever now.
Click to expand...
Click to collapse
Please reread the original post. Market Enabler does not work for Wifi only devices it only works for units with a radio.
ximoosea said:
Please reread the original post. Market Enabler does not work for Wifi only devices it only works for units with a radio.
Click to expand...
Click to collapse
Give Root Toolbox a try, it has a change location feature for the market
his iammissi
ximoosea said:
grrrrr.....can someone please help!!! I have seen multiple posts about this and I cannot believe there is not a long term fix.
Background
I have a GT 10.1 purchased from the USA...wifi only. I currently live in China. I have a Google account setup with a US credit card. I am using a VPN which gives a Utah IP address. I still cannot see most paid apps in Marketplace nor download and install many. I have many friends with iPads that do not have this restriction but I desperately want to stay with Android, but cannot believe Google has made this so frustrating.
Non-solution
Please do not recommend MarketEnabler. This app may work fine for some units if they have a radio but it does not work for wifi only devices.
Solution
I am able to get it to work following these instructions, but I have to do this every time and it is a pain....there has to be some setting or program that will make this easier. Can anyone please help me and the multitude of others that post about this same thing? There has to be some setting in build.prop or something that is controlling this. Thank you in advance.
1) Go into Settings>Applications>Manage Applications. Find Market and force stop it then clear cache.
2) Go into Settings>Accounts and sync and remove all of your google accounts. (I have not always had to perform this step but often it is required for some reason. Don't worry they are easy to add back and nothing gets deleted.)
3) Connect to a USA VPN.
4) Add back your main Google account that has an associated US credit card.
5) Open Market place and when you do you will have to agree to the terms and conditions again. Accept this. At this point you should be able to find and download most of those apps that you could not previously.
6) Now you can add back in all of your other Google accounts if you have more.
Please someone help us....there has to be an easier way!
Click to expand...
Click to collapse
If you have a SIM card from another country (your home country maybe?) , switch that into your SIM slot after removing you China Mobile/China Unicom SIM. Then you install the app with the foreign country SIM and once done, put in your China SIM once again
Source: I regularly do this to my HTC Desire and wife's Galaxy S2 and we live in China.
However, if you do not have SIM from another country, you're SOL. If you find out another way to do this, please let me know as well with the Note 10.1
First of all i would like to thank you all because by reading your posts i've got a good impression and bought the phone and i really like it (especially WP7).
Yes, WP7, not 7.5 because i dont know how am i supposed to upgrade @ 7.5 . It tells me that it will upgrade when i will connect it to a PC. Already done that but nothint.
I've updated it but it is @ version 7.0 (7008) :|
The WiFi doesn't really work, i have a netgear router and, each time i try to connect (Right Username & Right Password) it tells me that it's impossible, why that?
The other thing is the market.. what applications will you suggest me to use?
Best Regards and Thanks.
Still not working - HELP
Wrong place to ask. Ask this in the HTC 7 Mozart "General" sub-forum.
MySelf_v1 said:
Yes, WP7, not 7.5 because i dont know how am i supposed to upgrade @ 7.5 . It tells me that it will upgrade when i will connect it to a PC. Already done that but nothint.
I've updated it but it is @ version 7.0 (7008) :|
Click to expand...
Click to collapse
To install any updates available you will need to download the Zune software:
http://www.zune.net/
when it is fully installed launch it, connect your phone, click settings (in the top right hand corner). Navigate to the phone settings and update. It will talk you through the update process.
MySelf_v1 said:
The WiFi doesn't really work, i have a netgear router and, each time i try to connect (Right Username & Right Password) it tells me that it's impossible, why that?
Click to expand...
Click to collapse
The wifi in pre-mango really sucks, all-sorts of issues, you'll be happy to know that I've had these issues with it refusing to connect and refusing the correct password. The drivers included with Mango have fixed all such issues i've had and my wifi works perfectly now.
MySelf_v1 said:
The other thing is the market.. what applications will you suggest me to use?
Click to expand...
Click to collapse
Obviously marketplace apps are personal preference. I'd recommend 'Appflow' it is a good way to find apps such as 'best mango apps' 'best live tile apps' and 'apps gone free'.
Also browse applications > all applications and swipe to the free column, the best apps are those you don't splash out on
Otherwise, try every free app and every try before you buy app you can.
Hope this helps.
When I connect to the student's wifi network, it requiers to configure the proxy with authentification. Well I'm fine with that, and the browser works all right, but all of the apps which require internet access aren't working. I also noticed, that when I'm configuring the proxy in the settings, it actually says that the HTTP proxy will be used by the browser, but not by some of the apps (in my case none of the apps work, including the pre-installed apps like android market, youtube or google maps).
So my question is that is there any way to make the apps work with the HTTP proxy? I should say that I found this thread on this forum:
http://forum.xda-developers.com/showthread.php?t=836164
but I had trouble understanding it. Also if this matters, I'm using an Asus Eee Pad Transformer running android 3.2.1.
Which part you don't understand? You have to enter into console mode, and type these commands to copy, make the right folder, and start the application/configure it for auto start each boot I presume.
mast3rbug said:
Which part you don't understand? You have to enter into console mode, and type these commands to copy, make the right folder, and start the application/configure it for auto start each boot I presume.
Click to expand...
Click to collapse
Well, first of all, does this require rooting the device? What is APN? What is the adb shell? How do you enter the console? What is ppp? What is rmnet?
I should say that I've been using android for like a month and I have no experience with Linux and any kind of programming.
Isn't there anyone who has had this problem?
Come on people! Surely I'm not the only one who has had this problem?
Please count me in m having this issue on Galaxy tab using overcome Rom help needed Devss
.
Having the same problem, ISC Xperia S
Me too
Anyone who needs to conect in a proxy server with the solution in wifi configuration offeared by google will not get it. There is some apps that promes to do it but i tried some of them and got tired to tring one by one and they didn't work for me. I tried with full root access and in a ICS cyanogem mod ROM on a acer iconia tab a100 and in a htc 9100
If rooted you could find a way through ifconfig
Sent from my GT-S5302 using Tapatalk 2
Hit Thanx Button if i helped you!
Ideas?
So is there any way / chance to let an App go online via proxy?
I would love to start my onlineradio App "TuneIn" with a US IP, to be able to hear radio stations in the USA. Is this possible somehow?
I would be very thankfull, even for ideas which could just eventually work!
mee to facing the same issue
hi, did u slove this problem "How to make android apps to use the HTTP proxy? "
if had solv that problem plz share with me az well
Same problem. Please help.
Facing the same problem. Don't know how to work with console. Also does this require rooting the device. Please help.
I cannot believe this issue has gone cold. Ive been using the device settings to configure as well as xposed module per app hacking for a little while but it seems not to be working lately. BUMP !
I found a solution
If you are rooted try: store/apps/details?id=org.proxydroid&hl=en
(I'm new so I cant post links. That address is on the play store.)
Use drony app.....
It works in even non-rooted phones too...
Google Play Store Link
aanishjangra said:
Use drony app.....
It works in even non-rooted phones too...
Google Play Store Link
Click to expand...
Click to collapse
hey thanks a lot that works perfectly
http://www.phonearena.com/news/How-to-set-up-a-proxy-server-connection-in-Android_id70310 .Here are the link,which help you to make android apps.
try psiphon pro.. just follow this instructions
1. download the app
2. open the app & enter options
3. turn on tunnel whole device
4. then click more option
5. click http proxy
6.click use the following setting
7.put the proxy(host address) and port
8. enjoy... may not work for online games exept clash of clans
hope this helps☺
Psiphon pro solved my problem with proxy settings.
Now all my apps are able to connect proxy without problem.
Thanks bro.
I just got my Meizu MX4 and find several things which irritate me, was wondering if I can make suggestions for updates somewhere? Here are a few examples:
How do I get temp in C, with Display Language US English?
NearBy took an entire day to finally figure out where I live, although location is turned on and I tried to show it where I am.
Still new, more to follow if this is the place.
OhMan1 said:
How do I get temp in C, with Display Language US English?
Click to expand...
Click to collapse
Do want to change this in the wheather app? That one has a settings entry for that.
OhMan1 said:
NearBy took an entire day to finally figure out where I live, although location is turned on and I tried to show it where I am.
Click to expand...
Click to collapse
As far as I know there is a bug report for this and the developers are working on it. Let's see if the next update fixes the issue.
Thank you for the response Nikwen,
The weather app is automatically the Weather Channel, the only setting possible is location on or off. I had expected it to be there.
I'll keep my eye open for the fix to my other comment and also for additional things to talk about. I'm essentially very satisfied with the user experience and am certain that once apps and scopes begin showing up in numbers Ubuntu will be a viable alternative to the others on the market.
I assume I can continue to bring up problems I find here.
Thanks again
O
Found the next thing, although it's probably known. In camera I can't zoom. The zoom - + show, but nothing happens.
So, I found that I can change the weather app to celsius, but it doesn't work in the weather channel and it's what's used in NearBy with F.
I also found that the Amazon app goes automatically to Amazon.co.uk, but I live in Germany, I want .de, but how?
Next, I browsed Google.com, it sent me to Google.de, what else? I didn't want that, but it's impossible to get to complete English. The Google page is English, but when I touch settings, I land in a German page.
Those are my newest grumps, I'll keep looking.
TY for listening!
O
WiFi hotspot would also be nice, though I understand the OS is new and time will bring new features.
Wifi Hotspot
OhMan1 said:
WiFi hotspot would also be nice, though I understand the OS is new and time will bring new features.
Click to expand...
Click to collapse
Wifi hotspot is coming in the next update
It should be out in September or maybe later this month if we're lucky !
TY antole, that's welcome info. This morning I got an update, since then I get no notifications from gmail. Is that normal or do I need to make a setting? Another thing, Near By has disappeared, so I no longer see F not certain if that's good or bad atm.
I'm just enjoying playing with my new toy and thank all devs for the hard work amnd for putting up with my problems.
O
I haven't even tried the Gmail app sorry
My Gmail account is configured with Dekko
I didn't get any update this morning, was the update for the Gmail app ?
I've been running on OTA-5 for approximately two weeks now and I've had no issue with The Weather Channel displaying temperature in C but I live in France so that seems normal
My NearBy scope hasn't gone anywhere either ;p
anatole78 said:
I didn't get any update this morning, was the update for the Gmail app ?
Click to expand...
Click to collapse
The update was for Nexus devices only as the messaging issue they fixed didn't appear on other devices.
Back with more! Sorry to say I was overwelmed by the amount of work needed on OT and didn't want to sound like I was putting it down, so I stopped writing. Most are small, wish I could this or that. I found one today though which I had to ask about.
I tried to upload files to my P today, win7 couldn't do it so I tried Ubuntu desktop, 14.04 which couldn't mount my phone. Uh oh, what now? I can't find a setting anywhere which helps. Any advice would be appreciated.
Oh and the update I assume was somethsomething to get my new phone up to the current version. I must have removed Near By by accident, I have it back now, still in F. Must be the language, custom I live in germany but us us english.
Ty for the help!
O
If you cannot mount your phone, you can always enable ssh and use sftp to transfer files. Usual mounting should work though.
(If it still doesn't, you could try installing ADB on your computer. It might help.)
Thanks for your help Nik,
I figured it out, I needed to get into Developer Mode in order to get USB to work. Now I'm in, but have the next problem. I can only see the Home directories, but I want to download the files in the .local/share but I have no idea how to get there. On my MX4 I've gotten to the folder I want using File Manager, but how do I get there from my PC? Or more specifically, how do I download the files stored there?
O
Yeah, hotspot is here! Haven't had time to test it yet, but I love to watch UT develop.
Still hoping for a tip on getting to my files from a PC. I understand it's a kinda noobish question, but until now I've only fixed problems as they arrise in Ubuntu, haven't had time for it. Now I've started and don't know where to search for help.
And the potshot works great. Saw Cantata Nil, looks interesting, but having a problem finding servers, or do I have to set up my own server?
Thanx
O
Stupid auto correct, I meant hotspot and Nik.
I've finally found AskUbuntu, so I'm working on finding my own answers.
OhMan1 said:
Thanks for your help Nik,
I figured it out, I needed to get into Developer Mode in order to get USB to work. Now I'm in, but have the next problem. I can only see the Home directories, but I want to download the files in the .local/share but I have no idea how to get there. On my MX4 I've gotten to the folder I want using File Manager, but how do I get there from my PC? Or more specifically, how do I download the files stored there?
O
Click to expand...
Click to collapse
Use phablet-shell or adb shell.
OhMan1 said:
And the potshot works great. Saw Cantata Nil, looks interesting, but having a problem finding servers, or do I have to set up my own server?
Thanx
O
Click to expand...
Click to collapse
Yes, you need your own one.
OhMan1 said:
Stupid auto correct, I meant hotspot and Nik.
I've finally found AskUbuntu, so I'm working on finding my own answers.
Click to expand...
Click to collapse
AskUbuntu is great. :good: