Related
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
fwegsdfgdrg said:
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
Click to expand...
Click to collapse
check your pm sir, cz i can't post outside link right now, hope it will help you
I also have the exact same problem how can i fix my blu 5.5studio
fwegsdfgdrg said:
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
Click to expand...
Click to collapse
I have the same issue,my Samsung galaxy S 4 LTE SPH-L720T is stuck in Android System Recovery <3a> after installing the driver for 3D Pro. I have tried everything an no luck atall, PLEASE HELP!!!
abhoysm69 said:
check your pm sir, cz i can't post outside link right now, hope it will help you
Click to expand...
Click to collapse
hey brother.. will you sent me pm too???
please i need the tutorial to
bootloop
hey guys I've got the same problem delete files and boot loop help ...please..
Same problem with my BLU Studio 5.5S
it stuck on boot, but in my case, I think it has USB debugging enabled. Any help please?
hi, ,have you got solution to your problem? Im also have the same issue on my phone, ,is it possible to enable usb debugging on a stuck on boot logo? please help, ,thanks
same problem but on blu studio 6.0 hd
Sory if im posting in the wrong spot im new here. I dont have a pc. Im using a pcd chaser. Hello I have a problem with may blue studio 6.0 HD. I flashed a rom and the instructions sead no need to clear delvic or cache and now my phone is stuck in a bootloop and I can't get in to any mode to do a factory reset and I have it backed up on my SD card
ihave the same problem to sir my phone stuck on a boot loop can't turn off my phone
bahun said:
ihave the same problem to sir my phone stuck on a boot loop can't turn off my phone
Click to expand...
Click to collapse
Is there a way to go to recovery mode, do you know the key combination of your phone, can google
Endless boot look
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
BLU ENERGY X bootloop
My BLU ENERGY X is stuck in boot loop with access to fastboot only... Any tips on how to solve this?
liverite1978 said:
I have the same issue,my Samsung galaxy S 4 LTE SPH-L720T is stuck in Android System Recovery <3a> after installing the driver for 3D Pro. I have tried everything an no luck atall, PLEASE HELP!!!
Click to expand...
Click to collapse
What I figured you can do is install your stock rom and flash it.
Having same issue with my phone but I have a moto g 3rd gen., Can't get into recovery settings and usb debugging is disabled, My phone is just stuck in bootloop
stuck in bootloop....coolpad dazen x7.......no usb debugging enabled......??? how to enable in bootloop???
Blu 5.5 Studio D690U same problem!
abhoysm69 said:
check your pm sir, cz i can't post outside link right now, hope it will help you
Click to expand...
Click to collapse
I fund the rom at needrom.com then used SPFlash tool to format and download the ROM no help at all in spite of the fact that the SPflash tool reported "success" (checkmark on green background). Any ideas? P.S. For the fellow that needs to know the button combo it is <power and vol up & down, all together > then follow screen prompts.
I am also in a bootloop. I have Blu Studio G Plus. I can't seem to find the stock rom for S500Q 02
Hello everyone,
I have an LG k4 2017 (X230H)
I have searched for a infinity of methods for root, but I have not found anything to help with this.
If someone has an idea of what to do, I can be their tester.
Emmanuel027 said:
Hello everyone,
I have an LG k4 2017 (X230H)
I have searched for a infinity of methods for root, but I have not found anything to help with this.
If someone has an idea of what to do, I can be their tester.
Click to expand...
Click to collapse
I just got this terminal (LG-X230H-MM6.0-kernel-3.18.19+) and im looking actively for a way to root it, theres a metod to root MM 6.0 but we can't use it unless we have temporal root, i've ported a TWRP versión with a metod from here (XDA) using a MT6737M TWRP ported to our terminal, found an OEM rom w/o bloatware full LG, flashed it with SP Tools and works like a charm, trying to start from there.
Tryed to run the twrp w/o flashing it from the bootloader (fastboot boot <img file name>), I got a message that the transfer was ok but didn't start, just stays there, tryed to flash it and nothing.
Tryed to unlock the bootloader, it gives me the warning bla bla bla waranty, then the option volume up, to unlock and volume down to cancel, when I press volume up does nothing, no warning no select, nothing, but with volume down cancels it and resets it. ("OEM unlock" developer options is already active)
Until now I think the best way to install the custom TRWP is by SP tools, already tryed from SP tools, then when it tryes to flash it i got the error: "BROM ERROR, s_security_secure_usb_dl_image_sign_header_not_found (6045), MSP ERROE CODE : 0x00" So I need a way to sign my recovery.img as an LG OEM file, or a way to skip the sign check.
Still working on it.
VadjanD said:
I just got this terminal (LG-X230H-MM6.0-kernel-3.18.19+) and im looking actively for a way to root it, theres a metod to root MM 6.0 but we can't use it unless we have temporal root, i've ported a TWRP versión with a metod from here (XDA) using a MT6737M TWRP ported to our terminal, found an OEM rom w/o bloatware full LG, flashed it with SP Tools and works like a charm, trying to start from there.
Tryed to run the twrp w/o flashing it from the bootloader (fastboot boot <img file name>), I got a message that the transfer was ok but didn't start, just stays there, tryed to flash it and nothing.
Tryed to unlock the bootloader, it gives me the warning bla bla bla waranty, then the option volume up, to unlock and volume down to cancel, when I press volume up does nothing, no warning no select, nothing, but with volume down cancels it and resets it. ("OEM unlock" developer options is already active)
Until now I think the best way to install the custom TRWP is by SP tools, already tryed from SP tools, then when it tryes to flash it i got the error: "BROM ERROR, s_security_secure_usb_dl_image_sign_header_not_found (6045), MSP ERROE CODE : 0x00" So I need a way to sign my recovery.img as an LG OEM file, or a way to skip the sign check.
Still working on it.
Click to expand...
Click to collapse
thanks for your answer!
I'm pleased with the progress you're making!
Will you be able to share with me the TRWP and the rom with nothing of bloatware?
to do a couple of tests, I'm here to help you in what you need
I am 1 week close to getting root on this device
VadjanD said:
I just got this terminal (LG-X230H-MM6.0-kernel-3.18.19+) and im looking actively for a way to root it, theres a metod to root MM 6.0 but we can't use it unless we have temporal root, i've ported a TWRP versión with a metod from here (XDA) using a MT6737M TWRP ported to our terminal, found an OEM rom w/o bloatware full LG, flashed it with SP Tools and works like a charm, trying to start from there.
Tryed to run the twrp w/o flashing it from the bootloader (fastboot boot <img file name>), I got a message that the transfer was ok but didn't start, just stays there, tryed to flash it and nothing.
Tryed to unlock the bootloader, it gives me the warning bla bla bla waranty, then the option volume up, to unlock and volume down to cancel, when I press volume up does nothing, no warning no select, nothing, but with volume down cancels it and resets it. ("OEM unlock" developer options is already active)
Until now I think the best way to install the custom TRWP is by SP tools, already tryed from SP tools, then when it tryes to flash it i got the error: "BROM ERROR, s_security_secure_usb_dl_image_sign_header_not_found (6045), MSP ERROE CODE : 0x00" So I need a way to sign my recovery.img as an LG OEM file, or a way to skip the sign check.
Still working on it.
Click to expand...
Click to collapse
hello
can i please have the twrp image i know a way to flash it using moded LGUP member @Astr4y4L gave it to my as a bete as tester
VadjanD said:
I just got this terminal (LG-X230H-MM6.0-kernel-3.18.19+) and im looking actively for a way to root it, theres a metod to root MM 6.0 but we can't use it unless we have temporal root, i've ported a TWRP versión with a metod from here (XDA) using a MT6737M TWRP ported to our terminal, found an OEM rom w/o bloatware full LG, flashed it with SP Tools and works like a charm, trying to start from there.
Tryed to run the twrp w/o flashing it from the bootloader (fastboot boot <img file name>), I got a message that the transfer was ok but didn't start, just stays there, tryed to flash it and nothing.
Tryed to unlock the bootloader, it gives me the warning bla bla bla waranty, then the option volume up, to unlock and volume down to cancel, when I press volume up does nothing, no warning no select, nothing, but with volume down cancels it and resets it. ("OEM unlock" developer options is already active)
Until now I think the best way to install the custom TRWP is by SP tools, already tryed from SP tools, then when it tryes to flash it i got the error: "BROM ERROR, s_security_secure_usb_dl_image_sign_header_not_found (6045), MSP ERROE CODE : 0x00" So I need a way to sign my recovery.img as an LG OEM file, or a way to skip the sign check.
Still working on it.
Click to expand...
Click to collapse
Geetings.
Sorry for the delay i was a lil busy with my dad's car so forgot to check this post, im finished with that so im back to the x230h.
This the TWRP ported to our terminal if anyone wants it to test:
in google drive: /open?id=15g4hoMMKoIt6VKli7YgPsuguehcp4rCH
This one is the clean LG rom:
in needrom: /download/lg-x230-k4/
Can't post links yet ^^
---------- Post added at 04:49 PM ---------- Previous post was at 04:42 PM ----------
Skunkser said:
can i please have the twrp image i know a way to flash it using moded LGUP member @Astr4y4L gave it to my as a bete as tester
Click to expand...
Click to collapse
Done ^^
VadjanD said:
Geetings.
Sorry for the delay i was a lil busy with my dad's car so forgot to check this post, im finished with that so im back to the x230h.
This the TWRP ported to our terminal if anyone wants it to test:
in google drive: /open?id=15g4hoMMKoIt6VKli7YgPsuguehcp4rCH
This one is the clean LG rom:
in needrom: /download/lg-x230-k4/
Can't post links yet ^^
---------- Post added at 04:49 PM ---------- Previous post was at 04:42 PM ----------
Done ^^
Click to expand...
Click to collapse
Don't worry sir!
Thanks for u help!
I'll try it in the weekend
Hello, I know this post is from more than a month ago but I have a question, that clean lg rom, can I use it on a k4 model x230z? Would be my first time trying this and don't know the meaning of those letters at the end yet and I really hate the bloatware and personalized boot animation that my company installed on it
Yes, you can do it without problem
I have found the fastboot and I launched fastboot OEM unlock and it got confirmation page I can't press yes on it, so I'm stuck on unlocking the bootloader
janith4 said:
I have found the fastboot and I launched fastboot OEM unlock and it got confirmation page I can't press yes on it, so I'm stuck on unlocking the bootloader
Click to expand...
Click to collapse
Yes is "protected" i've read that using a dongle miniUSB to USB (https : //brain-images-ssl.cdn.dixons.com/1/6/10166261/u_10166261.jpg) you can connect a mouse/keyboard to do the job, didn't tried it yet cuz didn't wanted to avoid warranty but im past half way warranty so im going to try it soon.
Was messing around the x230h and by mistake did a full format so my nvram got erased, not a big deal is already fixed full working but still I want to fix it right, it would be helpful if someone can help me here, I just need the nvram.bin extracted with flashtools. ^^
VadjanD said:
Yes is "protected" i've read that using a dongle miniUSB to USB (https : //brain-images-ssl.cdn.dixons.com/1/6/10166261/u_10166261.jpg) you can connect a mouse/keyboard to do the job, didn't tried it yet cuz didn't wanted to avoid warranty but im past half way warranty so im going to try it soon.
Was messing around the x230h and by mistake did a full format so my nvram got erased, not a big deal is already fixed full working but still I want to fix it right, it would be helpful if someone can help me here, I just need the nvram.bin extracted with flashtools. ^^
Click to expand...
Click to collapse
Guys, do you know if I can get root access on a x230ds by following this thread? thanks in advance
vairedufes said:
Guys, do you know if I can get root access on a x230ds by following this thread? thanks in advance
Click to expand...
Click to collapse
You can try, they are mostly the same terminal, the last letters are generally regional settings the rom for the x230 is the neutral/original and then the company do the customs and the last letters are added, just remember to do a full flashtools backup including your nvram so you can recover it anytime, and if you could share the nvram.bin with me will be appreciated.
VadjanD said:
You can try, they are mostly the same terminal, the last letters are generally regional settings the rom for the x230 is the neutral/original and then the company do the customs and the last letters are added, just remember to do a full flashtools backup including your nvram so you can recover it anytime, and if you could share the nvram.bin with me will be appreciated.
Click to expand...
Click to collapse
Man, I thought I've already answered your comment, but now I'm seeing the answer it's not here
Well here we go...
While I'm willing to help all the poor x230ds community with this (and help myself too, lol) I think I need more detailed information on how to do it. Wish you could help!
Actually I've got root access on android before, It was 2015 and that didn't seem any hard at all. I remember I had just to put some files in SD card and restart phone in an unusual mode (by pressing some combination of keys), and from that state it could ran these SD card files. Also I remember something like clearing caches before installing custom ROMs and giving SuperSU access. It worked fine, but now I've got this x230ds and suddendly no one can do it :>
So let's get to work...
Just to show you the state I'm in when It comes to rooting-android-knowledge, for example when you've said you "got a terminal (LG-X230H-MM6.0-kernel-3.18.19+)", I was like "what on earth is a terminal, Is he talking about a cellphone?", lmao
As for the TWRP you've mentioned here, is this thing a "file" you put on SDCard too?
This the TWRP ported to our terminal if anyone wants it to test:
in google drive: /open?id=15g4hoMMKoIt6VKli7YgPsuguehcp4rCH
This one is the clean LG rom:
in needrom: /download/lg-x230-k4/
Click to expand...
Click to collapse
I suppose I have to download this clean LG rom and do something with this TWRP, but not sure what it is
just remember to do a full flashtools backup including your nvram so you can recover it anytime
Click to expand...
Click to collapse
Don't know how to do this backup, willing to study if you give me something about
and if you could share the nvram.bin
Click to expand...
Click to collapse
Sure! But need help on this one too
vairedufes said:
Man, I thought I've already answered your comment, but now I'm seeing the answer it's not here
Well here we go...
While I'm willing to help all the poor x230ds community with this (and help myself too, lol) I think I need more detailed information on how to do it. Wish you could help!
Actually I've got root access on android before, It was 2015 and that didn't seem any hard at all. I remember I had just to put some files in SD card and restart phone in an unusual mode (by pressing some combination of keys), and from that state it could ran these SD card files. Also I remember something like clearing caches before installing custom ROMs and giving SuperSU access. It worked fine, but now I've got this x230ds and suddendly no one can do it :>
So let's get to work...
Just to show you the state I'm in when It comes to rooting-android-knowledge, for example when you've said you "got a terminal (LG-X230H-MM6.0-kernel-3.18.19+)", I was like "what on earth is a terminal, Is he talking about a cellphone?", lmao
As for the TWRP you've mentioned here, is this thing a "file" you put on SDCard too?
I suppose I have to download this clean LG rom and do something with this TWRP, but not sure what it is
Don't know how to do this backup, willing to study if you give me something about
Sure! But need help on this one too
Click to expand...
Click to collapse
Greetings, first of all yes thats how you root most phones then we have the LG ones that have the bootloader locked so you can't do that, the bootloader locked in the LG phones protects the write of the boot.img and recovery.img so you can't write a custom recovery, most LG phones are like this, some can be rooted by other process as my LG L50, this one can be rotted using purpledrake, this program injects the root using the meta but this works only for 4.4.2-.
Can't post links yet so just remove the spaces in the links
Now, to backup your phone you need the scatter file that comes with the rom and the rom is on my others post is a clean LG rom no bloatware so even if you can't root it we can have a more clean one, is marked as a x230 it works really nice, you will need the SPFlashTools too. Too connect the phone to SPFlashTools; phone power off, press volume+ connect the USB and release volume+.
Clean X230 rom and Flashtools:
h tt ps : // drive.google. com/open?id=1VtnN14eRElO0LKo9bpo1k94rTPHSM215
h tt ps : // spflashtool. com/
And this video show you how to do it:
h tt ps : / / w w w . youtube. com/watch?v=UFiwuaxzhxM
Then you will need to check if you can unlock the bootloader, for that you will need to have the LG drivers installed and adb, check the next link there you have everything you need to do that, just follow the instructions:
h tt ps : / / w w w .skyneel. com/unlock-bootloader-lg-devices
Tell us if it works or are you stuck with the locked bootloader with the rest of us, gl.
Edit: In case you have the bootloader locked and can't unlock it (the volume+ key didn't work only the volume-)
and you want to install the clean rom, first of all backup your nvram as the video show you so even if you make a mistake you can recover it, this video show you how to:
h tt ps : / / www .youtube. com/watch?v=pOXS8yUlKig
Drivers:
h tt ps : / / drive.google. com/open?id=1p770FY4XZ2YwdMo49a8D54_P81HedKKo
The first time you connect the cellphone in download mode it can be a pain, the modem only connects for a few seconds so is hard to manually install the driver, luckily it will work just trying to connect it twice and will work.
Use only "Download Only" or "Firmware Upgrade" don't use "Format all + Download" the last one will erase the nvram too and if you don't have it and you have a locked bootloader it will be a pain to full fix it, that was my mistake still not sure how and why I select it, it was late and I was sleepy but erased my nvram. XD
Hello, I would like to know if it is possible to make a backup before proceeding to install this twrp since I am afraid that something will happen
VadjanD said:
Greetings, first of all yes thats how you root most phones then we have the LG ones that have the bootloader locked so you can't do that, the bootloader locked in the LG phones protects the write of the boot.img and recovery.img so you can't write a custom recovery, most LG phones are like this, some can be rooted by other process as my LG L50, this one can be rotted using purpledrake, this program injects the root using the meta but this works only for 4.4.2-.
Can't post links yet so just remove the spaces in the links
Now, to backup your phone you need the scatter file that comes with the rom and the rom is on my others post is a clean LG rom no bloatware so even if you can't root it we can have a more clean one, is marked as a x230 it works really nice, you will need the SPFlashTools too. Too connect the phone to SPFlashTools; phone power off, press volume+ connect the USB and release volume+.
Clean X230 rom and Flashtools:
h tt ps : // drive.google. com/open?id=1VtnN14eRElO0LKo9bpo1k94rTPHSM215
h tt ps : // spflashtool. com/
And this video show you how to do it:
h tt ps : / / w w w . youtube. com/watch?v=UFiwuaxzhxM
Then you will need to check if you can unlock the bootloader, for that you will need to have the LG drivers installed and adb, check the next link there you have everything you need to do that, just follow the instructions:
h tt ps : / / w w w .skyneel. com/unlock-bootloader-lg-devices
Tell us if it works or are you stuck with the locked bootloader with the rest of us, gl.
Edit: In case you have the bootloader locked and can't unlock it (the volume+ key didn't work only the volume-)
and you want to install the clean rom, first of all backup your nvram as the video show you so even if you make a mistake you can recover it, this video show you how to:
h tt ps : / / www .youtube. com/watch?v=pOXS8yUlKig
Drivers:
h tt ps : / / drive.google. com/open?id=1p770FY4XZ2YwdMo49a8D54_P81HedKKo
The first time you connect the cellphone in download mode it can be a pain, the modem only connects for a few seconds so is hard to manually install the driver, luckily it will work just trying to connect it twice and will work.
Use only "Download Only" or "Firmware Upgrade" don't use "Format all + Download" the last one will erase the nvram too and if you don't have it and you have a locked bootloader it will be a pain to full fix it, that was my mistake still not sure how and why I select it, it was late and I was sleepy but erased my nvram. XD
Click to expand...
Click to collapse
sorry but I can not unlock the bootloader
LGs suck! I have 7.0 & will be stuck with it until I get new phone..
This terminal is very difficult to control, the bootloader can not be unlocked, it can not be rooted using kingroot or some other method, it is required that the roms are "signed" for the sp flash tool so nothing can be done. even the download mode does not work ...
I have a doubt why I can not update using fota with the rom x230 clean?
I remember that I recently received an update and now with this rom it does not detect any update
JaegerFox said:
This terminal is very difficult to control, the bootloader can not be unlocked, it can not be rooted using kingroot or some other method, it is required that the roms are "signed" for the sp flash tool so nothing can be done. even the download mode does not work ...
I have a doubt why I can not update using fota with the rom x230 clean?
I remember that I recently received an update and now with this rom it does not detect any update
Click to expand...
Click to collapse
For the type of rom, this rom is the LG stock rom and is the last from LG, mostly the last update that you got is from your custom dealer rom (I have too one a lot more modern from Telcel México 06/2018) but for me I prefer a cleaner rom that is stable than a modern one, I have no problems with the clean one everything works great and the last update from Telcel just added more bloatware and more adds.
this phone use mt6739.so i want to flash it the twrp to my phone.i dunno to unlock the bootloader but the twrp file not have for this device.
I just saw this post as I too have a Honor 7S
There is NO TWRP for our device.
The TWRP for the Honor 7A/7C/7X and Honor 7 doesn't work on our device and you got to pay 4 euros to unlock the bootloader before you can even flash TWRP (and there isn't one)
This Device is treble compatible but now I've found out there is zero development and no Devs Interested in it it's a complete and utter waste of time and has gone back into its box, never to be seen again.
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Samuel Ladziansky said:
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Click to expand...
Click to collapse
Hi I have a problem. I'm having brom issues in trying to flash it
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
usab1oy said:
Hi I have a problem. I'm having brom issues in trying to flash it
Click to expand...
Click to collapse
and little hint
dont flash whole rom if the phone can boot becasue after clean flash "format+download"
you lost log and cust partition because the image files are not secureboot signed and your phone get in to bootloop
and also you lost imei codes so no cellular after that
If you do so
you can fix it in that recovery were I enabled option to format log partition
after you format log to ext4, your phone will boot but without huawei/honor bootanimation
you dont need to worry about cust partition, if you didnt format it it still boot but without bootanimation and you lost some of garbage apps that are in that partition (amazon etc...)
(twrp boots in russian language, idk for now how to change it to boot in english or slovak lanuage (because Im from slovakia) and also it have Lenovo Logo becasuse I use sources from Lenovo A5 that have same cpu)
I will make in future separated thread for this....
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Samuel Ladziansky said:
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
Click to expand...
Click to collapse
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
usab1oy said:
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
Click to expand...
Click to collapse
you can patch it or flash it without disconecting the battery
Here is how:
turn it off
Push and hold volume down
While holding volume down connect usb cable
But is recomended to disconect battery because the phone can boot up instead to go in flash mode.
usab1oy said:
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Click to expand...
Click to collapse
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Samuel Ladziansky said:
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Click to expand...
Click to collapse
Yeah. For the flash mode, I wonder why his own he said I need to hold the volume up and down button at the same time. But thanks I'll do it and let you know.
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Samuel Ladziansky said:
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Click to expand...
Click to collapse
At this point. Might just abandon it. Thanks for everything. Ran into laptop issue on my third trial lol.
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Samuel Ladziansky said:
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Click to expand...
Click to collapse
Honestly. I spend a whole night researching videos for the phone. Only to get that link I send. And after all that. It still didn't work. Lol. I have a Poco x3 pro. I wonder if snapdragon android 12 can be rooted. Probably going to try it next month or so.
Snapdragon is eazy for root.
I have Redmi note 11 and it was easy, now I running on Android 13 from stock android 11, if you will need some help with something, I'm here, and I think there is device forum so there is community for that device
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
I also have exact problem no solution till now!!!
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
This u read?
https://www.getdroidtips.com/stock-rom-realme-u1-firmware/
Please reply
I accidentally hard bricked my realme u1 while I am rooting it.
Any solution please reply.
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
Hey man!
It's not a hardbrick, its soft brick.
If you can access recovery then flash a custom recovery, then flash the original boot.img and recovery.img, then reboot to COS recovery flash your ozip and reboot this should fix it!
Hope this helps!
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
DHANOLA said:
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
Click to expand...
Click to collapse
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
[email protected]#$ said:
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
Click to expand...
Click to collapse
You can contact me by mail: [email protected]
DHANOLA said:
You can contact me by mail: [email protected]
Click to expand...
Click to collapse
Hello Everyone!! It has been two years for me to be in this situation. I get mail from many of those who have a similar problem. So I am here, providing the solution to how I solved this solution.
For the solution, you may, first of all, join the given below Telegram. Link from anybody's phone and ask there for your problem or describe your problem in the group someone will help you out. The group icon has been attached.
Just connect to them on telegram and tell your issue they will surely help..
Telegram link
https://t.me/RealmeU1
Or search for Realme U1 group in telegram
Group icon attached
If then also you need help, please contact me by my mail. As mentioned in the above chat reply,
Update 2021.01.24: I consider the problem mentioned here as solved, since it can be resolved with MTK Bypass explained in the Guides Section. BE CAREFUL however to ONLY choose "Download Only" from the dropdown box in SP Flashtool! DO NOT select anything with "Format" in it, else you will lose S/N, MACs and IMEIs!
--- Original post ---
Hi, I have hard-bricked my new Realme 6 while trying to root it with Magisk. At the moment I am stuck in a bootloop at the power-on logo (realme in white letters). The boot animation (yellow realme letters) does not appear, instead the phone reboots after ~35 seconds. The bootloader says "Orange State".
I can NOT enter fastboot nor recovery mode by any key combination. Holding Power and Vol- makes the string RECOVERY MODE appear for a split second in the lower left part of the screen, however nothing happens afterwards.
I can power down by holding Power and Vol+ an releasing them immediately after the screen goes blank.
Holding Vol- and Vol+ while the phone is off and connecting USB makes a USB serial device appear on a windows machine for about 1-2 seconds before it disappears again.
I am very thankful for any hints on how to unbrick the device.
Here's what I have done in detail to mess up the phone:
1. OTA-Update to the latest OS in my region (EU11.A.48)
2. Unlocked the bootloader with the realme In-depth Test app (everything fine so far)
3. Download stock firmware RMX2001EU_11.A.48 ozip from realmeupdater.com
4. Unzipped with gnu unzip (content was readable, no extra decrytion tool for the ozip needed?) and extracted boot.img
5. Installed Magisk Manager and uploaded boot.img to the phone
6. Patched boot.img with Magisk Manager (and if I remeber correctly DIDN'T UNCHECK Preserve AVB 2.0/dm-verity)
7. Certainly FORGOT to do anything with vbmeta.img
8. Did NOT erase cache and userdata
9. Flashed patched boot.img directly and WITHOUT --disable-verity or --disable-verification
10. Rebooted the phone.
Am I correct that my problem is the AVB/dm-verity part?
Why does the modified boot.img affect the recovery (I thought they were seperate)
Can I try something with SP Flashtool?
I do have a second intact device that I didn't dare to touch yet, if that helps resolving the issue (e.g. for SP Flashtool readbacks).
As said any advice is highly welcome. Please ask I you need any more information to help.
I did that too... Magisk patched boot .img process of rooting is the risky process , I bricked my device, got it into red state.. tried thick and thin to revive using various flash tools, unable to do it, finally went to a shop , got it fixed, go-to a good repair shop, if you go to the service center, they will say replace motherboard for 5 k , I hope it helps, do traditional unlock bootloader TWRP recovery then flashing Magisk zip method for rooting process.
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
cmfan said:
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
Click to expand...
Click to collapse
Yes, you are right , red state means that, I guess bcoz, I may have formatted it and ran again unlocked bootloader but it showed unlocking failed, but I thought that I had previously unlocked it so it should be unlocked but I forgot to do that app thing process of deep test again, and I was on Android 10 latest and patched boot img of previous version using magisk, now I understand what mistake I made, I should have used boot IMG of current version of a 10 , but still I am afraid of doing this magisk method of rooting by patching boot IMG bcoz repair cost me 800/- , and I found out on YT that the latest version of a 10 of my device doesn't readily allows twrp and flashing zip of magisk.... Plus there are half baked info on important things, this is new device for me, I have had rooted Samsung and Lenovo, but rooting this is kind of tricky, bcoz it's still new, I think.... Want to try .... But I m afraid.... Tried fastboot method of TWRP flashing but can't replace stock room, so I guess I can't root .....
Well, there is a tutorial on how to root here on XDA, and seems to be confirmed working. I just didn't know about the vbmeta part from earlier Android versions. Haven't you tried that?
cmfan said:
Well, there is a tutorial on how to root here on XDA, and seems to be confirmed working. I just didn't know about the vbmeta part from earlier Android versions. Haven't you tried that?
Click to expand...
Click to collapse
Thnx man, I have rmx 1825 , but the process would be same for my device, I would have to search for it...
cmfan said:
Thank you for sharing! But doesn't red state mean locked BL plus non-stock firmware? I wish I could find any repair shop during this Corona lockdown... May I ask how much they charged you for having the phone reflashed?
Click to expand...
Click to collapse
Hello, please check my reply to your reply on my thread. BROM mode is as known as "Emergency Mode" and should not be inaccessible. I will once again request you to try different key combinations and also if it's detecting as fastboot, ADB or Fastboot commands should be available. Please try typing adb reboot or fastboot reboot with minimal ADB and fastboot tools and let me know. If you want to personally message me, message my telegram. I will try helping you there.
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
daeSundae said:
Hello, please check my reply to your reply on my thread. BROM mode is as known as "Emergency Mode" and should not be inaccessible. I will once again request you to try different key combinations and also if it's detecting as fastboot, ADB or Fastboot commands should be available. Please try typing adb reboot or fastboot reboot with minimal ADB and fastboot tools and let me know. If you want to personally message me, message my telegram. I will try helping you there.
Click to expand...
Click to collapse
I think there is no Emergency Download Mode in Realme devices.. pls guide ...
Ank Sak said:
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
Click to expand...
Click to collapse
Hello. Please follow this guide.
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
daeSundae said:
Hello. Please follow this guide.
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
Click to expand...
Click to collapse
Thnx that's a life saver, I am afraid to go forward with the device, this is promising, I will try, I found out that the new version c17 os Android 10 I am unable to root by twrp magisk zip flashing method, twrp isn't installing, there's an .ofp extracter, but it gives virus with software, unable to do, even talked on WhatsApp and gave him Gmail id, will try this method , I wanted the SP flash tool method, it's simple and can readily restore the stock rom... Thnx Sundae.. daesundae ... What kind of name is that...?? .. chuckles...
Ank Sak said:
Why is this thread showing solved !!! It's nothing solved here... Pls check and confirm
Click to expand...
Click to collapse
This thread is about a Realme 6 (RMX2001 in my case). I've edited the very first post to immediately show the solution. Please check there or follow daeSundae's guide if you have a different device.
cmfan said:
This thread is about a Realme 6 (RMX2001 in my case). I've edited the very first post to immediately show the solution. Please check there or follow daeSundae's guide if you have a different device.
Click to expand...
Click to collapse
I saw everything that You posted, incidentally the YouTube video on this is on rmx1825 , thnx, whatever you posted it helped..